Tender For Construction Of Bus Terminal And Workshop Building For Uttarakand Transport Corporation At Ramnagar, District - Nainital, Nainital-Uttarakhand

TDR : 35470415

Tender Notice
Corrigendum Details
BOQ

Expired

Nainital , Uttarakhand

Tender Brief : Corrigendum : Tender For Construction Of Bus Terminal And Workshop Building For Uttarakand Transport Corporation At Ramnagar, District - Nainital

Document Fees
₹ 5900 /-

EMD
₹ 4426000.0 /-

Tender Value
₹ 22.13 Crore /-

Submission Date
20-01-2023

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !

Sr No	Corrigendum Date	Corrigendum	Type	New Submission Date
1	13-01-2023	Date Extend	Date	20-01-2023
2	06-01-2023	corrigendum in unit of boq	Other	16-01-2023

Name of Work:CONSTRUCTION OF BUS TERMINAL AND WORKSHOP BUILDING FOR UTTARAKHAND TRANSPORT CORPORATION AT RAMNAGAR, DISTRICT - NAINITAL

Sl. No.	Item Description
1	CIVIL WORKSEarth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m inwidth or 10 sqm on plan), including dressing of sides and ramming ofbottoms, lift upto 1.5 m, including getting out the excavated soil anddisposal of surplus excavated soil as directed, within a lead of 50 m.
2	Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.
3	Filling available excavated earth (excluding rock) in trenches ,plinth,sides of foundation etc . in layers not exceeding 20cm indepth, consolidatingeach deposited layer by ramming and watering lead upto 50m and lift upto 1.5m.
4	Supplying chemical emulsion in sealed containers including delivery asspecified.Chlorpyriphos/ Lindane emulsifiable concentrate of 20%
5	Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)
6	Providing and laying in position cement concrete 1:4:8 (1cement :4 coarse sand (zoneIII):08graded stone aggregated40mm.nominal size.) excluding the cost of centering and shuttering - All work upto plinth level
7	Concrete with cement, coarse sand and 40 mm gauge stone ballast inproportion 1:4:8 in foundations and floors including supply of all material,labour and T&P etc. required for proper completion of the work. as perdrawings and technical specifications Clause 802, 803, 1202 & 1203
8	Construction of granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge. With material conforming to Grade-I (size range 75 mm to 0.075 mm) having CBR Value-30
9	Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement - All work upto plinth level 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stoneaggregate 20 mm nominal size) All works upto plinth level
10	Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :) 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)
11	Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. (Note :- Cement content considered in this item is @ 330 kg/cum. Excess/ less cement used as per design mix is payable/recoverable separately). All works upto plinth level
12	Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. (Note :- Cement content considered in this item is @ 330 kg/cum. Excess/ less cement used as per design mix is payable/recoverable separately).All works above plinth level upto floor V level
13	Centering shuttering including strutting, propping etc. and removal of form work Foundations, footings, bases of columns, etc. for mass concrete
14	Centering shuttering including strutting, propping etc. and removal of form work Columns, Pillars, Piers, Abutments, Posts and Struts
15	Centering shuttering including strutting, propping etc. and removal of form work Suspended floors, roofs, landings, balconies and access platform
16	Centering shuttering including strutting, propping etc. and removal of form work Lintels, beams, plinth beams, girders, bressumers and cantilevers
17	Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.
18	Reinforcement for R.C.C work including straighting,cutting,bending, placing in position and bending all completeThermo-Mechanically Treated bars.
19	230th Brick work withcommon burnt clayF.P.S. (non modular) brick of class designation 75 in foundation & plinth in cement mortar 1:6
20	Brick work with F.P.S bricks of class 75 in super structure abovestructure above plinth level up to floor five level in all shapes and sizes incement mortar 1:6 (1 cement : 6 coarse sand )
21	Half brick masonry with F.P.S bricks of class designation 75 in superstructure above plinth level up to floor five level in cement mortar 1:4 ( 1 cement : 4 coarse sand)
22	Extra for providing and placing in position 2 Nos. 6mm dia. M.S.bars at every third course of half brick masonry (with F.P.S.bricks).
23	Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard with rectangular/ L-Type sections, made of 1.60 mm thick M.S. Sheet, joints mitred, welded and grinded finish, with profiles of required size, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)
24	Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws
25	Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D,F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design, (sectional weight of only steel members shall be measured for payment). Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)
26	Providing and fixing stainless steel (Grade 304) railing made of Hollowtubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).
27	Providing & fixing fly proof wire gauze to windows, clerestory windows &doors with M.S. Flat 15x3 mm and nuts & bolts complete.Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides
28	5.0 mm thick glass panes (weight not less than 12.5 kg per sqm)
29	Providing and fixing M.S. grills of required pattern in frames of windowsetc. with M.S. flats, square or round bars etc. including priming coatwith approved steel primer all complete.Fixed to steel windows by welding.
30	Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to openings /wooden frames with rawl plugs screws etc.
31	Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with :5.5 mm thick glass panes
32	Providing and fixing 2nd class teak wood plain lining tongued and grooved, including wooden plugs complete with necessary screws and priming coat on unexposed surface. 20 mm thick
33	12 mm cement plaster of mix :1:6 (1 cement: 6 fine sand)
34	12mm thick plaster on the plain in side of mix 1:6 ( 1 cement : 6 fine sand) mortar
35	15 mm cement plaster on the rough side of single or half brick wall of mix :
36	12 mm cement plaster finished with a floating coat of neat cement of mix : 1:3 (1 cement: 3 fine sand)
37	12 mm cement plaster finished with a floating coat of neat cement :1:4 (1 cement : 4 fine sand)
38	15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix :1:4 (1 cement: 4 fine sand)
39	Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate
40	Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality 19.19.1 L D- 2.5 Rectangular shape 600x450 mm internal dimensions
41	Inlet Pipe 100 mm dia
42	Outlet Pipe 100 mm dia
43	Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long co mplete as per standard designWith common burnt clay F.P.S. (non modular) bricks of classdesignation 7.5
44	Excavating trenches of required width for pipes, cables, etc including excavation for sockets and dressing of sides, ramming of bottoms, depth upto 1.5 m including getting out the excavated soil and then returning the soil as required, in layers not exceeding 20 cm in depth including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : All kinds of soil
45	Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars 250 mm dia. R.C.C. pipe250 mm dia RCC pipes.
46	Constructing brick masonry circular manhole 1.22 m internal dia at bottom and 0.56 m dia at top in cement mortar 1:4 (1 cement :4 coarse sand) inside cement plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement foundation concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement, all complete as per standard design :1.68 m deep with SFRC Cover and frame (heavy duty HD20 grade designation) 560 mm internal diameter conforming to I.S. 12592, total weight of cover and frame to be not less than 182 kg. fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including centering, shuttering all complete. (Excavation, foot rests and 12 mm thick cement plaster at the external surface shall be paid for separately) :
47	Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) as per standard design :With 20x20 mm square bar
48	Providing & fixing offoot rest in tank
49	Finishing walls with water proofing cement paint of required shade New work (Two or more coats applied @ 3.84 kg/10 sqm)
50	6mm thick cementplaster of ceiling of mix 1:3 ( 1 cement : 3 fine sand) mortar
51	Distempering with oil bound washable distemper of approved brandand manufacture to give an even shade : New work (two or more coats) over and including water thinnable priming coat with cement prime.
52	Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.
53	Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.
54	Finishing walls with textured exterior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm)
55	Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
56	Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture
57	French spirit polishing : Two or more coats on new works including a coat of wood filler
58	Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick
59	Providing and laying integral cement based treatment for water proofing on the vertical surface by fixing specified stone slab 22 mm to 25 mm thick with cement slurry mixed with water proofing compound conforming to IS:2645 in recommended proportions with a gap of 20 mm (minimum) between stone slabs and the receiving surfaces and filling the gaps with neat cement slurry mixed with water proofing compound and finishing the exterior of stone slab with cement mortar 1:3 (1 cement : 3 coarse sand) 20 mm thick with neat cement punning mixed with water proofing compound in recommended proportion complete at all levels and as directed by Engineer-in-charge : Using rough Kota stone
60	Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600x600 mm
61	Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.
62	Crazy marble stone flooring, including filling the gaps with light shade pigment with white cement marble powder mixture (3 parts of white cement : 1 part of marble powder) by weight in proportion of 4:7 (4 cement marble powder mix : 7 white, black or white and black marble chips of sizes from 1 mm to 4 mm nominal size by volume), with under layer 25 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5 mm nominal size), including rubbing, polishing and cement slurry etc. complete : 18 mm thick crazy marble stone white, black or as specified
63	Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge : Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.
64	Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size) in pavements, laid to required slope and camber in panels as required including consolidation finishing and tamping complete.
65	Providing and laying C.C. pavement of mix M-25 with ready mixedconcrete from batching plant. The ready mixed concrete shall belaid and finished with screed board vibrator , vacuum dewateringprocess and finally finished by floating, brooming with wire brushetc. complete as per specifications and directions of Engineer-incharge. (The panel shuttering work shall be paid for separately).(Note:- Cement content considered in this item is @ 330 kg/cum.Excess/less cement used as per design mix is payable/ recoverableseparately).
66	Providing and laying Non Pressure NP-4 class (Heavy duty) R.C.C. pipes including collars/spigot jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete 1800 mm dia RCC pipes. (Laying by manual/ machanical means)
67	Constructing brick masonry road gully chamber 50x45x60 cm with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) including 500x450 mm pre-cast R.C.C. horizontal grating with frame complete as per standard design : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
68	Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer-in-charge, upto 90 metre depth below ground level. All types of soil All types of soil 300 mm dia
69	Supplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 plain slotted (having slot of size 1.6/3.2 mm) mild steel threaded and socketed/ plain bevel ended pipe (type A) of required dia, conforming to IS: 8110, of reputed and approved make, having wall thickness not less than 5.40 mm, including painted with outside surface with two coats of anticorrosive bitumestic paint of approved brand and manufacture, including hire & labour charges, fittings & accessories, all complete, for all depths, as per direction of Engineer -in-charge.. 200 mm nominal size dia
70	Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.
71	Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge
72	Supplying, filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer -incharge.
73	Providing and fixing factory made precast RCC perforated drain covers, having concrete of strength not less than M-25, of size 1000 x 450x50 mm, reinforced with 8 mm dia four nos longitudinal & 9 nos cross sectional T.M.T. hoop bars, including providing 50 mm dia perforations @ 100 to 125 mm c/c, including providing edge binding with M.S. flats of size 50 mm x 1.6 mm complete, all as per direction of Engineerin- charge.
74	Cement Concrete (PCC M-30) Pavement:-Construction of Un-reinforced, Cement concrete pavement, thickness asper design, over a prepeared sub base with 43 grade cement or any othertype PCC Grade M-30, coarse and fine aggregates conforming to IS: 383,maximum size of coarse aggregate not exceeding 25 mm, mixed in aconcrete mixer of not less then 0.2 cum capacity and appropriate weighbatcher using approved mix design, laid in approved fixed side formwork(Steel channel, laying and fixing of wedges, steel plates including levellingthe formwork and laying and fixing of 125 micron thick polythene film, asper drawing), spreading the concrete with shovels, rakes, compacted usingneedle, and plate vibrators, finished in continuous operation and curing ofconcrete slabs for 14 days, using curing compound where specified andwater finishing to lines and grade as per drawings and technicalspecifications.
75	Providing and fixing Glow studs of size 100x20 mm made of heavyduty body shall be moulded ASA (Acrylic styrene Acryloretrite ) orHIP (High impact polystyrene) or ABS having electronically weldedmicro- prismatic lens with abrasion resistant coating as approved byEngineer in charge. The glow stud shall support a load of 13635 kgtested in accordance with ASTM D4280. The slope of retro- reflectivesurface shall be 35 (+/-5) degress to base .The reflective panels onboth sides with at least 12 cm of reflective area up each side. Theluminance intensity should be as per the specification and shall betested as described in ASTM I: 809 as recommended in BS: 873 part 4 : 1973. The studs shall be fixed to the Road surface using theadhesive conforming to IS, as per procedure recommended by themanufacturer complete and as per direction of Engineer-in-charge.
76	Manufacturing, supplying and fixing retro reflective overhead signage boards made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity and encapsulated lens type heat activatedretro reflective sheeting conforming to type - III of ASTM-D-4956-01 as approved by Engineer-in-charge, letters, borders etc. as per IRC : 67-2001 in silver white with blue colour back ground and with high intensity grade, pasted on substrate by pressure sensitive adhesive backing which shall be activated by applying pressure conforming to class II of ASTM-D-4956-01 and fixing the same to the plate of structural frame work by means of suitable sized aluminium alloys, rivets or bolts & nuts @ 300 mm centre to centre all along the periphery as well as in two vertical rows along with theft resistant measures, including the cost of painting with two or more coats of epoxy paint in grey colour on the back side of aluminium sheet including appropriate priming coat. The rate includes the cost of rounding off the corners, lowering down the structural frame work from the gantry, fixing and erecting the same in position all complete as per drawings, specification and direction of the engineer-incharge.(Structural frame work including M.S. plate to be provided separately. Rectangular area of the sheet only shall be measured for payment).
77	Providing and applying 2.5 mm thick road marking strips (retroreflective) of specified shade/ colour using hot thermoplastic material by fully/ semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per direction of Engineer-in-charge and accordance with applicable specifications.
78	Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge).
79	Providing and fixing bright finished brass door latch with necessary screws etc. complete : 300x16x5 mm
80	Providing and fixing bright finished brass hanging type floor door stopperwith necessary screws, etc. complete.
81	Providing and fixing bright finished brass handles with screws etc. complete: 125 mm
82	Providing and fixing bright finished brass tower bolts (barrel type) withnecessary screws etc. complete : 250x10 mm
83	Providing and fixing PTMT door catcher of length 72 mm and dia.of 42 mm with suitable washers weighing not less than 33 gms.
84	Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :300x10 mm
85	Providing and fixing bright finished brass 100 mm mortice latch andlock, ISI marked, with six levers and a pair of anodised (anodic coatingnot less than grade AC 10 as per IS : 1868) aluminium lever handles ofapproved quality with necessary screws etc. complete.
86	Providing and fixing aluminium hanging floor door stopper, ISI marked,anodised (anodic coating not less than grade AC 10 as per IS : 1868)transparent or dyed to required colour and shade, with necessary screws etc. complete. Single rubber stopper
87	Providing and fixing aluminium handles, ISI marked, anodised (anodiccoating not less than grade AC 10 as per IS : 1868) transparent or dyedto required colour or shade, with necessary screws etc. complete : 125 mm
88	Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete.
89	Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
90	Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 1.00 mm thick with zinc coating not less than 275 gm/m².
91	Providing and fixing 15 cm wide, 45 cm overall semi-circular plain G.S. sheet gutter with iron brackets 40x3mm size, bolts, nuts and washers etc., including making necessary connections with rain water pipes complete. 0.80 mm thick with zinc coating not less than 275 gm/m²
92	Providing & fixing UV stabilised fiberglass reinforced plastic sheet roofing up to any pitch, including fixing with polymer coated \"J\" or \"L\" hooks, bolts & nuts 8mm dia. G.I plain/bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3% ultra-violet stabiliser in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall conform to IS 10192 and IS 12866.The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified.2 mm thick flat
93	Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)
94	Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineerin- charge. Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side
95	Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5 mm thickness (weight not less than 12.50 kg/ sqm)
96	Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double action hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in charge (Door handle, lock and stopper etc.to be paid separately).
97	Grading roof for water proofing treatment with Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size)
98	Providing and laying integral cement based treatment for water proofing on the vertical surface by fixing specified stone slab 22 mm to 25 mm thick with cement slurry mixed with water proofing compound conforming to IS:2645 in recommended proportions with a gap of 20 mm (minimum) between stone slabs and the receiving surfaces and filling the gaps with neat cement slurry mixed with water proofing compound and finishing the exterior of stone slab with cement mortar 1:3 (1 cement : 3 coarse sand) 20 mm thick with neat cement punning mixed with water proofing compound in recommended proportion complete at all levels and as directed by Engineer-in-charge : Using rough Kota stone
99	Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying :(a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours.(b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.
100	Design supply & installation of suspended Spider Glazing system designed to withstand the wind pressure as per IS 875 (Part-III). The Suspended System held with Spider Fittings of SS-316 Grade Steel of approved manufacturer with glass panel having 12 mm thick clear toughened glass held together with SS- 316 Grade Stainless steelSpider & bolt assembly with laminated glass fins 21 mm thick. The Glass fins and glass panel assembly shall be connected to Slab/ beams by means of SS- 316 Grade stainless steel brackets & Anchor bolts and at the bottom using SS channel of 50x25x2mm using fastener & anchor bolts, non staining weather sealants of approved make, Teflon/ nylon bushes and separators to prevent bi-metallic contacts, all complete to perform as per specification and approved drawings. The complete system to be designed to accommodate thermal expansion & seismic movements etc. The joints between glass panels (6 to 8 mm) and gaps at the perimeter & in U channel of the assembly to be filled with non staining weather sealant, so as to make the entire system fully water proof & dust proof.The rate shall include all design, Engineering and shop drawing including approval from structural designer, labour, T&P, scaffolding,other incidental charges including wastage, enabling temporary services all fitting fixers nut bolts, washer, Buffer plates, fastener, anchors, SS channel laminated glass etc. all complete. For the purpose of payment, actual elevation area of Glazing including thickness of joints and the portion of Glass panel inside the SS channel shall be measured.
101	Supplying of 3 seater stainless steel chair including all labour as per direction given by engineer in charge.
102	Supplying of stainless steel stool including all labour as per direction given by engineer in charge.
103	Supplying of VFC polished apron locker including all labour as per direction given by engineer in charge.
104	Supplying of office table including all labour as per direction given by engineer in charge.
105	Supplying of executive chair including all labour as per direction given by engineer in charge.
106	Supplying of visitor chair including all labour as per direction given by engineer in charge.
107	Supplying of 3 seater Public Place Seating Chair of mild steel with arm and backrest WITH CUSHION including all labour as per direction given by engineer in charge
108	Supplying of office table including all labour as per direction given by engineer in charge. .
109	Supplying of executive chair including all labour as per direction given by engineer in charge. .
110	Supplying of visitor chair including all labour as per direction given by engineer in charge. .
111	S/F of 7.5 HP 3 phse submersible pump.
112	S/F of 10 HP 3 phase L&T electronic panel.
113	S/F of 65 mm dia submersible cable
114	development of tubewell by air compressor
115	Charges of lowering pump set
116	Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps
117	Providing and fixing white vitreous china flat back or wall corner typelipped front urinal basin of 430x260x350 mm and 340x410x265 mmsizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :One urinal basin with 5 litre white P.V.C. automatic flushing cistern
118	Providing and fixing white vitreous china pedestal type water closet(European type W.C. pan) with seat and lid, 10 litre low level whiteP.V.C. flushing cistern, including flush pipe, with manually controlleddevice (handle lever), conforming to IS : 7231, with all fittings andfixtures complete, including cutting and making good the walls andfloors wherever required : W.C. pan with ISI marked white solid plastic seat and lid
119	Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :Kitchen sink without drain board 610x510 mm bowl depth 200 mm
120	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.15mm dia nominalbore
121	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.25 mm dia. nominal bore
122	Providing and fixing ball valve (brass) of approved quality complete High or low pressure with plastic floats25 mm dia. nominal bore
123	Providing and fixing gun metal non- return valve of approved quality (screwed end) :25 mm nominal bore
124	Providing and fixing uplasticised PVC connection pipe with brass unions 15mm nominal bore:
125	Constructing masonry Chamber 120x120x100 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S.(non modular) bricks of class designation 7.5
126	Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
127	Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 75 mm diameter
128	Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.110 mm diameter
129	Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conformingto IS : 13592 Type A, including jointing with seal ring conforming toIS : 5382, leaving 10 mm gap for thermal expansion.COUPLER 75 mm diameter
130	Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conformingto IS : 13592 Type A, including jointing with seal ring conforming toIS : 5382, leaving 10 mm gap for thermal expansion.COUPLER110 mm diameter
131	Single tee with door75x75x75 mm
132	Single tee with door110x110x110 mm
133	Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.BENDS 75 mm diameter
134	Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.BENDS110 mm diameter
135	Providing and fixing mirror of superior glass (of approved quality) andof required shape and size with plastic moulded frame of approvedmake and shade with 6 mm thick hard board backing :Rectangular shape 453x357 mm.
136	Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : 15 mm nominal bore
137	Providing and fixing C.P. brass long body bib cock of approved qualityconforming to IS standards and weighing not less than 690 gms. 15 mm nominal bore
138	Providing and fixing C.P. brass stop cock (concealed) of standarddesign and of approved make conforming to IS:8931. 15 mm nominal bore)
139	Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 18.53.1 15mm nominal bore
140	Providing and fixing PTMT soap Dish Holder having length of 138mm,breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms.
141	Providing and fixing PTMT towel rail complete with brackets fixed towooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms
142	M.S. PIPEProviding laying, testing & commissioning of \"C\" class heavy duty MS Pipe conforming to IS 1239/3589 i/c fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. in ground including welding, excavation & providing cement concrete blocks as supports, anticorrosive treatment with coaltar/asphalt tape as per IS 10221, refilling the trench etc. of following sizes complete as required.150 mm. Dia
143	FIRST AID HOSE REELSupplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required. 20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585. 20 mm nominal internal dia gun metal globe valve & nozzle. Drum and brackets for fixing the equipmets on wall. Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket.40 m
144	HYDRANT VALVESupplying and fixing single headed internal hydrant valve with instantaneous unmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gunmetal/Stainless Steel cap and chain as required :Single headed Stainless steel
145	NON RETURN VALVEProviding, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required :150mm dia
146	HOSE PIPESupplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A) as required :Gun Metal
147	PRESSURE SWITCHProviding & fixing of pressure switch in M.S. pipe line including connection etc. as required.
148	FLOW SWITCHProviding & fixing flow switch in following sizes M.S. pipe including connection etc as required.
149	MAIN FIRE PUMPSupplying, installation, testing and commissioning of Electric driven Main Fire Pump suitable for automatic operation and consisting of following, complete in all respects, as required : (a) Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal conforming to IS 1520. (b) Suitable HP Squirrel cage induction motor, TEFC, synchronous speed 1500 RPM, suitable for operationon 415 volts, 3 phase 50 Hz, AC supply with IP 55 protection for enclosure, horizontal foot mounted type with Class-\"F\" insulation, conforming to IS-325.(c) M.S. fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required.(d) Suitable cement concrete foundation duly plasteredwith anti vibration pads. 1620 lpm at 56 m Head
150	INTELLIGENT FIRE ALARM SYSTEM Supplying, installation, testing and commissioning of micro processor based intelligent addressable main fire alarm panel, central processing unit with the following loopmodules and capable of supporting not less than 240 devices (including detectors) and minimum 120 detectors per loop and loop length up to 2 km, network communication card, minimum 320 character graphics/ LCD display with touch screen or other keypad and minimum 4000 events history log in the non volatile memory (EPROM), power supply unit (230 ± 5% V, 50 hz), 48 hrs back-up with 24 volt sealed maintenance free batteries with automatic charger. The panel shall have facility to connect printer to printout log and facility to have seamless integration with analog/digital voice evacuation system (which is part of the schedule of work under SH: PA System) and shall be complete with all accessories . The panel shall be compatible for IBMS systemwith open protocol BACnet/ Modbus over IP complete as per specifications.
151	FIRE EXTINGUISHERProviding and fixing of ABC type (Stored Pressure) Fire Extinguisher I.S.I marked & T.A.C.approved complete in alrespect. 4 kg. capacity
152	FIRE EXTINGUISHERProviding and fixing of ABC type (Stored Pressure) Fire Extinguisher I.S.I marked & T.A.C.approved complete in alrespect. 6 kg. capacity
153	Supplying & Fixing Sand Bucket
154	Design, Construction, supply of all materials, labour, T&P etc. of R.C.C. O.H.T. of 50 Kl with 30 cm freeboard and submission of detailed structural drawings before starting of work, M.S. Pedestal type ladderfor Tank, M.S. M.H. cover with locking arrangement, making 1200 mm dia RCC ventilator on top slabcovered around with mosquito proof jali, lightning conductor as per latest electricity rules/codes,automatic water level indicator and supply & fixing of G.I. (M) D/F pipes of class B as per ISspecifications for outlet, inlet, over flow and wash out pipes of requires sizes with necessary puddlecollars, duck foot bends, sluice valves including construction of sluice valves chambers, pipe pieces(including cost of materials), clamping of vertical pipes with MS, painting on tank body vertical pipes,ladder, M.S. M.H. cover, supply & fixing of gate at the entrance of stair case etc. complete with paintingof all parts with three coats of approved water proofing, snowcem/enamel paint of required qualityand shade over a required type of base coat, testing, filling water as many times as required for testingand water tightening purposes etc. including. Supply of vertical pipes and specials, complete in allrespects and as per satisfaction of Engineer in charge
155	HORTICULTURE Trenching in ordinary soil up to a depth of 60 cm including removal and stacking of serviceable materials and then disposing of surplus soil, by spreading and neatly levelling within a lead of 50 m and making up the trenched area to proper levels by filling with earth or earth mixed with sludge or / and manure before and after flooding trench with water (excluding cost of imported earth, sludge or manure).
156	Supplying and stacking of Good earth at site including royalty and carriage with all lead and lifts, (earth measured in stacks will be reduced by 20% for payment).
157	Rough dressing the trenched ground including breaking of clods.
158	Fine dressing the ground
159	Preparation of beds for hedging and shrubbery by excavating 60 cm deep and trenching the excavated base to a further depth of 30 cm, refilling the excavated earth after breaking clods and mixing with sludge or manure in the ratio of 8:1 (8 parts of stacked volume of earth after reduction by 20% : one part of stacked volume of sludge or manure after reduction by 8%), flooding with water, filling with earth if necessary, watering and finally fine dressing, leveling etc. including stacking and disposal of materials declared unserviceable and surplus earth by spreading and leveling as directed, within a lead of 50 m, lift up to 1.5 m complete (cost of sludge, manure or extra earth to be paid for separately)
160	Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reduction by 8%) flooding with water, dressing including removal of rubbish and surplus earth, if any, with all leads and lifts (cost of manure, sludge or extra good earth if needed to be paid for separately)Holes 90 cm dia, and 90 cm dee
161	Flooding the ground with water including making Kiaries and dismantelling the same
162	Supplying and stacking of cow dung manure/cattle manure at site including cost and carriage with all lead and lifts, (manure measured in stacks will be reduced by 8% of payment.
163	Providing and displaying of Areca Palm having ht. 1.80 m to 2.10 m with 8 to 10 suckers, well developed, fresh and healthy with lush green foliage in 30 cm size of Earthen pot/Plastic pot & as per direction of the officer-in-charge.
164	Providing and displaying of Raphis Palm having ht. 75 cm to 90 cm with 15 to 18 equal suckers, well developed, full of fresh and healthy leaves from bottom to top in 35 cm PVC Pots/C.Pots & as per direction of the officer-in-charge
165	Providing and Displaying Bismarckia Palm 115 to 180 cm ht., well developed12 and above good color fresh and healthy leaves in 40 cm Cement Pot as per direction of the officer-in-charge.
166	Providing and Displaying Cycus revoluta in 35 cm challi, specimen , having 30 to 40 with fresh and healthy, leaves having 25cm to 30cm circumfrance of base stem well developed as per direction of the officer-in-charge. D.S.R. 5.14
167	Providing and Displaying Ficus reginold piller type Topiary well developed with fresh & healthy 210 to 240 cm ht in 40 cm Cement Pot as per direction of the officer-in-charge
168	Providing and Displaying Phoenix roebelenii palm well developed having 20 to 25 fresh & healthy leaves 90 to 105 cm ht. in 30 cm Cement Pot as per direction of the officer-in-charge.
169	Providing and Displaying Topairy plant of Ficus Panda well developed with fresh & healthy foliage with 3 to 4 Ball and 60 to 75 cm spread each Ball, 135 to 150 cm t., in 35 cm Cement Tray /Cement Pot as per direction of the officer-in-charge.
170	Providing and stacking of Albizzia lebbek of height 150-165 cm. in bag of size 25 cm as per direction of the officer-in-charge.
171	Providing and stacking of Bauhinia blakeana (Kachnar) of height 120-150 cm. in big polybags of size 25 cm as per direction of the officer-in-charge.
172	Providing and stacking of Cassia fistula (Amaltash) of height 120-135 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge.
173	Providing and stacking of Delonix regia (Gulmohar) of height 150-165 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge.
174	Providing and stacking of Ficus benjamina (green) of height 150-165 cm., bushy with healthy branches and lush green foliage in big size HDPE bags as per direction of the officer-incharge.
175	Providing and stacking of Foxtail palm of ht. 180-210 cm bottom girth 25-30 cm well developed in big size HDPE bags as per direction of the officer-in-charge.
176	Providing and stacking of Jacaranda mimosifolia of height 150-165 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge.
177	Providing and stacking of Michelia champa (Golden Champa) of height 90-105 cm. in earthen pots of size 25 cm as per direction of the officer-in-charge.
178	Providing and stacking of Plumeria alba of height 120-135 cm. with 2-3 branches in bags of size 30 cm as per direction of the officer-in-charge
179	Providing and stacking of Hibiscus variegated of height 45-60 cm. with 3-4 branches and healthy variegated foliage in earthen pots of size 20 cm as per direction of the officer-in-charge.
180	Providing and stacking of Nerium oleander (kaner) of height 60-75 cm. with 5-6 branches in poly bags of size 25 cm as per direction of the officer-in-charge.
181	Providing and stacking Bougainvillea (Variety Butiana, Lady Mary Baring, Mahara,Mohan,Scarlet Queen, Variegated, Glabra Formosa, Peruviana Odissi, Paratha, Subhra,Thimma, Spectabilis L.N Birla, Refulgens) of height 30 cm. to 45 cm. with 2-3 branches in 20 cm size of Earthen pots / Plastic pots & as per direction of the officer-in-charge.
182	Providing and stacking of Ipomoea purpurea (Morning glory) of height30 cm to 45 cm. in 20 cm size of Earthen pots / Plastic pots & as per direction of the officer-in-charge.
183	Providing and stacking of Quisqualis indicia of height 30 cm to 45 cm. in 20 cm size of Earthen pots / Plastic pots & as per direction of the officer-in-charge.
184	Providing and stacking of Jasmine grandiflorum (chameli) of height 30 cm to 45 cm. in 20 cm size of Earthen pots / Plastic pots & as per direction of the officer-in-charge.
185	Providing and stacking of Duranta Golden, having ht.15 to 20 cm bushty shape with fresh and healthy leaves in 15 cm size of Earthen Pot/Plastic Pot & as per direction of the officer-in-charge.
186	Providing and stacking of Clerodendrum inerme having ht. 25 cm to 30 cm multi branched in 20 cm size of Earthen Pot/Plastic Pot & as per direction of the officer-in-charge.
187	Providing and stacking of Tradescantia zebrina having in 20 cm size of Earthen Pot / Plastic Pot & as per direction of the officer-in-charge.
188	Providing and stacking of Wedelia trilobata, full of leaves in 15 cm size of Poly bags & as per direction of the officer-in-charge.
189	Providing and stacking of Ophiopogon, Green/Black full of leaves in 15 cm size of Earthen Pot/Plastic Pot & as per direction of the officer-in-charge. D.S.R. 6.19
190	Bush Rose in different colour 2 to 3 healthy branch 30 cm and above ht. well developed with 8 or more flowers / flower buds in 20 cm Earthen pot / Plastic pot as per direction of the officer-in-charge.
191	Providing and Displaying Verbena in different colour having 30 to 45 cm ht., well developed with fresh & healthy foliage in bloom condition in 25 cm Earthen Pot/Plastic Pot and as per direction of the officer-in-charge.
192	Providing and stacking of winter seasonal seedling/cutting at site of work well developed and healthy free from disease in per tray and each tray having 100 Nos plants as per direction of the officer-in-charge. Petunia hybrid
193	Providing and Displaying Bougainvillea named variety, Sobhra, Thima, Marry palmar, Cherry Blossom etc. well developed with fresh & healthy bushy in full bloom 75 to 90 cm ht. in 40 cm Cement Pot as per direction of the officer-in-charge.
194	Providing and stacking of winter seasonal seedling/cutting at site of work well developed and healthy free from disease in per tray and each tray having 100 Nos plants as per direction of the officer-in-charge. Marigold French Hybrid dwarf
195	Providing & laying Selection no. 1 grass turf with earth 50mm to 60mm thickness of existing ground prepared with proper level and ramming with required tools wooden and than rolling the surface with light roller make the surface smoothen and light watering the same maintenance for 30 days or more till the grass establish properly, as per direction of officer in charge
196	FURNITURE: Supplying of 3 seater Public Place Seating Chair of mild steel with arm and backrest WITH CUSHION including all labour as per direction given by engineer in charge
197	Supplying of office table including all labour as per direction given by engineer in charge. .
198	Supplying of executive chair including all labour as per direction given by engineer in charge. .
199	Supplying of visitor chair including all labour as per direction given by engineer in charge. .
200	Supplying of 3 seater stainless steel chair including all labour as per direction given by engineer in charge.
201	Supplying of stainless steel stool including all labour as per direction given by engineer in charge. .
202	Supplying of VFC polished apron locker including all labour as per direction given by engineer in charge. .
203	Supplying of office table including all labour as per direction given by engineer in charge. .
204	Supplying of executive chair including all labour as per direction given by engineer in charge. .
205	Supplying of visitor chair including all labour as per direction given by engineer in charge. .
206	ELECTRICAL WORKSWGSTLPT Point wiring in PVC conduit, with modular type switch.Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required.Group C
207	WGSTLMIDTC Twin Control point wiring inPVC conduit, with modular type switch:Wiring for twin control light point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc as required.
208	WGSTLPP2 Power plug wiring inPVC conduit (2x4 sq. mm)Wiring for light/power plug with 2x4 sq.mm FR PVC insulated copper conductor single core cable in surface/ recessed steel conduit alongwith 1 No 4 sq. mm FR PVC insulated copper conductor single core cable for loop earthing as required.
209	WGSTLSB Circuit/ submain wiring inPVC conduit:Wiring for circuit/ submain wiring alongwith earth wire with thefollowing sizes of FRLS PVC insulated copper conductor, singlecore cable in surface/ recessed medium class PVC conduit asrequired.2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire
210	WGSTLSB Circuit/ submain wiring inPVC conduit:Wiring for circuit/ submain wiring alongwith earth wire with thefollowing sizes of FRLS PVC insulated copper conductor, singlecore cable in surface/ recessed medium class PVC conduit asrequired.2 X 4 sq. mm + 1 X 4 sq. mm earth wire
211	WGSTLSB Circuit/ submain wiring inPVC conduit:Wiring for circuit/ submain wiring alongwith earth wire with thefollowing sizes of FRLS PVC insulated copper conductor, singlecore cable in surface/ recessed medium class PVC conduit asrequired.4 X 10 sq. mm + 2 X 6 sq. mm earth wire
212	PVCCON S/F PVC conduit:Supplying and fixing of following sizes of PVC conduit along with accessories in surface / recess including painting in case of surface conduit, or cuttting the wall and making good the same in case of recessed conduit as required.25 mm
213	MB S/F metal boxes:Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc as required.75 mm X 75 mm X 60 mm deep
214	PTSWEB S/F modular type switch/ socket:Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.5/6 amps switch
215	PTSWEB S/F modular type switch/ socket:Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.3 pin 5/6 amp socket outlet
216	LPACCPT S/F light plug point modular type accessories:Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required. (For light plugs to be used in non residential buildings).
217	PPACCPT S/F power plug point modular type accessories:Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required.
218	BRHOLD S/F brass holder:Supplying and flxing brass batten/angle holder including connection etc. as required.
219	ITCFFSUR ITC fluorescent fitting directly on surface:Installation, testing and commissioning of pre-wired, fluorescent fitting/ compact fluorescent fitting of all types, complete with all accessories and tube etc. directly on ceiling / wall, including connection with 1.5 sq.mm FR PVC insulated, copper conductor, single core cable and earthing etc. as required.
220	PWTPMCBDB S/F TP MCB DB:Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)4 way (4 + 12), Double door
221	PWTPMCBDB S/F TP MCB DB:Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)6 way (4 + 18), Double door
222	PWTPN MCBDB S/F TP MCB DB:Supplying and fixing of following ways surface/ recessmounting, vertical type, 415 V, TPN MCB distribution board ofsheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar,din bar for mounting MCBs (but without MCBs and incomer ) asrequired . (Note : Vertical type MCB TPDB is normally usedwhere 3 phase outlets are required.)4 way (4 + 12), Double door
223	PWTPN MCBDB S/F TP MCB DB:Supplying and fixing of following ways surface/ recessmounting, vertical type, 415 V, TPN MCB distribution board ofsheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar,din bar for mounting MCBs (but without MCBs and incomer ) asrequired . (Note : Vertical type MCB TPDB is normally usedwhere 3 phase outlets are required.)8 way (4 + 24), Double door
224	MCBTPIS S/F TP MCB isolator:Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissoning etc. as required.63 amps
225	MCBC S/F \"C\" curve, SP MCBSupplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole
226	Supply and fixing ofLED Tube light1200mm 20W 865 T8 IP20 ,Lumen Output-1600 , 3000, 4000, 6500K ceiling mounted LED batten (E-LITE LED TRIYCA) , extruded aluminium heat sink provided for efficient heat deissipation 7& integrated electronic driver. ( 1x20 W LED Double 6500K) complet in all aspects as per direction of Engineer in charge.
227	SUPPLY OF LED Glass Bulb B22, 15 W,6000k /4000k/3000K ,230/250 Volt,50 HZ ETC, complete in all aspects as per direction of Engineer in Charge.
228	Supply and fixing of exhaust fan,230/250 Volt,50 HZ ETC, complete in all aspects as per direction of Engineer in Charge.
229	Supply, Installation, Testing and Commissioning of 1200 mm sweep,BEE 5 star rated, ceiling fan withBrush Less Direct Current (BLDC)Motor, class of insulation: B, 3 nos.blades, 30 cm long down rod, 2nos. canopies, shackle kit, safetyrope, copper winding, Power Factor not less than 0.9, ServiceValue (CMM/W) minimum 6.85,Air delivery minimum 215 CMM,350 RPM (tolerance as per IS : 374- 2019), THD less than 10%, remoteor electronic regulator unit for speed control and all remaining accessories including safety pin,nut bolts, washers, temperaturerise=75 degree C (max.), insulationresistance more than 2 mega ohm,suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc.complete as required.
230	Supply and fixing ofhigh beam light60W 865 T8 IP20 ,Lumen Output-1600 , 3000, 4000, 6500K ceiling mounted LEDcomplet in all aspects as per direction of Engineer in charge.
231	LT XLPE CABLESLaying of one number PVC insulated and PVC sheathed / XLPEpower cable of 1.1 KV grade of following size direct in groundincluding excavation, sand cushioning, protective covering andrefilling the trench etc as required.3.5c x 150 sq.mm cable
232	3.5c x 95 sq.mm cable
233	3.5c x 25 sq.mm cable
234	4c x 16 sq.mm cable
235	4c x 10 sq.mm cable
236	supplying and making end termination with brass compressiongland and aluminium lugs for following size of PVC insulatedand PVC sheathed / XLPE aluminium conductor cable of 1.1 KVgrade as required.3 X 150 sq. mm (50mm)
237	3.5c x 95 sq.mm cable
238	3.5c x 25 sq.mm cable
239	4c x 16 sq.mm cable
240	4c x 10 sq.mm cable
241	Supplying and laying of following size DWC HDPE pipe ISI markedalong with all accessories like socket, bend, couplers etc.conforming to IS 14930, Part II complete with fitting and cutting,jointing etc.direct in ground (75 cm below ground level) includingexcavation and refilling the trench but excluding sand cushioningand protective covering etc., complete as required. 120 mm dia (OD-120 mm & ID-103 mm nominal)
242	200 mm dia (OD-200 mm & ID-175 mm nominal)
243	Supply,of following sizes of PVC sheathed LT XLPE armoured, aluminium 1.1KV grade, as required of the following sizes. For overhead pump
244	Supply & fixing of 45 W LED street Light System, Standalone Street Light system mentioned below includes LED street Light in built SCC,SPV Panel Battery, HDG Tubular Pole. Connecting Wire etc. of standard make (Havells) complete in all aspects as per direction of Engineer in Charge.
245	Supply of 82.5 KVA DG Set Koel Green silent diesel , complete with standard Accessories complete in all aspects as per directionof Engineer In-charge
246	Installation, testing and commissioning of 11/0.4 KV, 3 Phase Transformer on PCC Double Pole structures, along with installation of LT Distribution Box with cable arrangement from Distribution transformer to Distribution Box, Insulators & fittings, Material for concrete foundation, Channel for supporting insulators, Channel andangle for supporting HG Fuse unit and AB Switch, Channel for supporting transformer, Belting and belting support for transformer, MS Channel for Cable support, PG connectors, Danger plate, Sign board, Anti climbing device (barbed wire), Earthing arrangement with 4 no.s Earth Electrodes with Pit, Lighting Arrestor (where ever applicable) Fasteners with washers, All clamps and requiredhardware & all other sundry items complete as per REC Standard TS. The scope also includes termination of 11 KV line, replacement of damaged jumpering of substation as per relevant standard installation of all clamps, connectors, lugs / sockets, binding wire, and providing insulating tape and any other consumables.100 KVA TransformerInstallation of Stay Sets, Stay Wire, Stay Insulator completeincluding Concreting as per TSConstruction of 1.5 m high Barbed Wire Fencing, supply anderection of PCC Post of size 3\" x 3\" at top and 5\" x 5\" at bottom2.0m high, 2.0 m c/c imbeded in 1:3:6 concrete (20 mm nominalsize of aggregate) block 450x450x600 mm. Corner post shall bestruted on both sides and end post shall be struted on one side only
247	as per TS.Supply and Installation of Double Leaf MS Gate of height 1.5 mheight x 1.5 m width, made up of 30x30x6 angle and 25x6 Flat asper approved Drawing. Gate is to be supported on concrete columnsize 300x300x2000 m. The gate shall be painted with two coat ofapproved primer with two coats of approved epoxy paint.Installation of Following Items with all required accessories tocomplete the Incoming 11 KV Line work9 Mtr x 300 Kg PSC Pole with Base Plate 8 Mtr x 200 Kg PSC Pole with Base Plate Coil Earthing 34 MMAAAC (3 Phase)55 MMAAAC (3 Phase)HT Stay Set CompleteInsulatorDisk Insulator with Hard Ware Pin Insulator with GI Pin V Cross Arm & Pole Top Bracket (F Clamp)Straight Cross Arm (75x40x6 mm Channel) Danger Board Anti Climbing Device (Barbed wire) GI Wire for Guarding at Road Crossing Installation of Following Items with all required accessories tocomplete the Outgoing LT AB Cable workPSC Pole (8 Mtr x 200 Kg) Coil Earthing 3 x 35 + 1 x 25 MMAB Cable including Eye Hook, Pole Clamp,Suspension / Strain Fitting3 x 50 + 1 x 35 MMAB Cable including Eye Hook, Pole Clamp,Suspension or Dead End FittingLT Stay Set Complete Service Di+B4stribution Box including Service Connection toexisting consumers.4 Way 8 Way 12 WayPiercing Connector (AB Cable to SDB) Neutral Connector
248	commissioning of free standing, floor mounted indoor type, air insulated, totally enclosed vermin proof, dead front, compartmentalised, cubicle type, 2 mm thick sheet steel enclosure panel suitable for use on 415 V, 3 Ph.,4 wire, 50 Hz. A.C. system, incoming circuit breaker/ S F unit, high conductivity TP & N Aluminium bus bars, bus bar, risers, extended bus bars for cable connection, outgoing circuit breakers instrumental panel, C.Ts, outgoing feeder terminals and incoming cable compartment. The incoming and outgoing functional units shall be arranged in multi tier formation to provide a compact panel. Each unit shall be accommodated in a totally separate compartment having gasketted hinged door with locking arrangement. The Panel shall be complete with switches/circuit breakers of following ratings, interconnection, G.I. earth bus bar of adequate size covering the total length of switch board with drilled holes, G.I. bolts, nuts, washers etc. The cubicle should be painted with two (2) coats of light grey synthetic enamel paintover two coats of zinc chromate primer. The complete fabrication, construction shall be done as per the detailed specification and conforming to the relevant IS. Short circuit interrupting current of all MCBs should be of 10 KA minimum. Name plate of Panels/DBs Danger Board, incoming and outgoing feeders with Ampere rating of switches/ MCCB/ MCB etc. are to be fixed up on front door above or below the respective switches. Approval of Manufacturer\"s drawings fromonsultant/Employer is required before commencing manufacture and panel should be tested in the presence of Consultant/ Employer. This includes 20 no. 250 amp MCCB, 2 no. 63 MCCB & 2 no. 40amp MCCB.
249	Supply and fixing ofLED Tube light1200mm 20W 865 T8 IP20 ,Lumen Output-1600 , 3000, 4000, 6500K ceiling mounted LED batten (E-LITE LED TRIYCA) , extruded aluminium heat sink provided for efficient heat deissipation 7& integrated electronic driver. ( 1x20 W LED Double 6500K) complet in all aspects as per direction of Engineer in charge.
250	INDOOR ESCALATOR: DesignManufactureand Supplyingdeliveryat site, Installation, Testing & Commissioning, approvals (statutory orotherwise) and handingoverinsatisfactory working conditionsof Escalator9000personcapacity /hour, l000mmwide(stepwidth),35degreeinclination(Heady Duty reversible type) at speed of 0.50 meters per second and 3flatsteporasperdetailedspecificationattached.Travel height for Escalaters is 6 to 7 metre.
251	Tube Well and Boring:Transportation of Rig Machine.
252	Drilling of 300mm dia in Boulders, Sand pebbles
253	150mm dia 5.4mm thick Plain ERW casing pipe.
254	150 mm mm dia 5.4mm thick Slotted ERW casing
255	S/f of 150mm dia Casing Sue.
256	S/f of 7.5HP Three Phase Submersible Pumps.
257	S/f of 10HP Three Phase L&T electronic pannel.
258	S/f of 65mm dia HDP Column pipe
259	S/f of 6mm dia submersible cable
260	Development of Tubewell by Air Compressor
261	S/f of elbo niplle,cap,reducer etc.
262	Charges of lowering of pump set.
263	DOOR FRAME METAL DETECTOR: Supply, Installation, Testing & Commissioning of20 Zone pr above door frame metal detector nominal size 760mm ( W) x 2050mm (H) x700 MM (D) Loaded with neccessary software etc. complete as required.
264	BAGGAGE SCANNERS: Supply, Installation, Testing & Commissioning of Baggage scanner big computer based multy energy X-Ray baggage inspection system capable of passing trought bags / parcels of dimension 940 MM ( W) x640 MM (H) with Belt height -750mm - 850mm with 22\"/24\" LCD Monitor, InputOutput rollers with frames etc. complete as required.
265	TURBO BIO- REACTOR SYSTEM- MODEL 15 TBRdesign, engineering, procurement and supply for Effluent cum Sewage Treatment Plant of capacity 75 KL/Day, as per system description and comprising of various units with specifications mentioned hereunder. We shall provide layout/working drawings. Civil work is excluded from our scope1.0 BAR SCREEN-1.1- Type- Bar,1.2- MOC- MSEP, 1.3- Quantity - 1 No., 2.2 - PRIMARY CLARIFER3.0 - SEWAGE TRANFER PUMP-I- 3.1 - Capacity - 3.75 KL/Hr, 3.2- Head - 8 to 10 m, 3.3- Type- Centrifugal, 3.4- MOC- CI, 3.5 - Make- Kirloskar/KSB/WO/Equivalent, 3.6- Quantity- 2 No. (1W+1S), 4.0- WO- TURBO BIO REACTOR SYSTEM5.0- SEWAGE TRANFER PUMP-II- 5.1- Capacity-3.75 KL/Hr, 5.2- Head- 8 to 10 m, 5.3- Typc- Centrifugal, 5.4- MOC- CI, 5.5- Make- Kirloskar/KSB/WO/Equivalent, 5.6- Quantity- 2No. (1W+1S)6.0 - SLUDGE PUMP- 6.1- Type- Centrifugal, 6.2- Capacity- 3.75 KL/hr, 6.3- Head- 8 to 10 m, 6.4- MOC- CI, 6.5- Make- Kirloskar/KSB/Wilo/WO/ Equivalent6.6 Quantity- 1 No.7.0- AIR BLOWERS WITH MOTORS7.1- Type- Twin lobe- 7.2- Required Capacity- 95 M3/hr, 7.3- Motors make- ABB/BBL/Equivalent, 7.4- Make- Blowers - Wock Oliver/Equivalent, 7.5- Quantity- 2 No. (1W+1S)8.0- AIR PURGING GRID- 8.1- Type- Non clog, segmented for easy maintenance, 8.2- Tested Pressure- 205 Kg/cm2 , 8.3- MOC- PVC/UPVC/ Equivalent, 8.4- Location of placement- Bioreactors, 8.5- Quantity- 1 Set,
266	9.0 - CHEMICAL DOSING SYSTEM- 9.1- Capacity- 0-6 ltrs/hrs, 9.2- MOC-PP, 9.3- Make- UKL/Aquanomics/Equivalent, 9.4-Dosing Tank- 50ltrs HDPE/3 nos., 9.5- Quantity- 3 Nos.10.0 - DISINFECTION SYSTEM- 10.1- Type- on line, 10.2- Chlorine Dosing Pumps- Metering Type, 10.3- Make- UKL/Aquanomics/Equivalent, 10.4- Capacity- 0-6 lph, 10.5- Dosing Tank- 50 Ltrs. HDPE/1 Nos., 10.6- Quantity- 1 Nos.11.0 FILTER FEED PUMP- 11.1- Capacity- 3.75 Kl/hr, 11.2 Head- 15 to 20, 11.3- MOC-Cl, 11.5- Make-Kirloskar/KSB/Equivalent, 11.6- Quantity- 2 Nos. (2 (1W+1S)12.0- PRESSURE SAND FILTER(PSF)- 12.1- Capacity- 3.75 Kl/hr, 12.2- Height of vessel- 1350 mm, 12.3-MOC-FRP/MS, 12.4 - Tested Pressure- 2.5 kg/cm2, 12.5- Accessories- The unit will be complete with frontal piping & valves and first lot of media, 12.6- Make -Wock-Oliver/Equivalent, 12.7- Quantity- 1 Nos.13.0- ACTIVATED CARBON FILTER(ACF)- 12.1- Capacity- 3.75 Kl/hr, 12.2- Height of vessel- 1350 mm, 12.3-MOC-FRP/MS, 12.4 - Tested Pressure- 2.5 kg/cm2, 12.5- Accessories- The unit will be complete with frontal piping & valves and first lot of media, 12.6- Make -Wock-Oliver/Equivalent, 12.7- Quantity- 1 Nos.14.0- ELECTRICAL COMPONENTS14.1- CONTROL PANEL/CENTRE (MCC)- 14.1.1- Type- TBRTM mounted Vermin proof, 14.1.2- Make- Wock-Oliver, 14.1.3- Internal Electrical Components- Schenider/Equivalent, 14.1.4 WLCD - Minilec14.2- CABLING - Within our battery limit,14.3- EARTHING- Not in our battery limit (client\" scope)15.0- INSTRUMENTATION COMPONENTS- 15.1- All piping and valves , Piping- UPVC/PVC/MS/ G.I., Valves- UPVC/PVC/MS/G.I.Including Supervision for erection and commissioning charges extra
267	8 Passengers (640 Kgs) G+4 Upper Floors: Installation, testing and commissioning of elevators/ escalators at site as listed under Technical Specifications: Type of lift- Passenger lift, Travel Height- 18 mtrs., no. of stops- 6 stops, overhead height- 4500 mm, pit required - 1500mm, load - 8 passengers (640kg.), speed - 1m/s, Drive- Micro Processor based VVVF, Design of Car- Stainless Steel Hairline and Mirror Finish, Door entrance- 700 mm Width x 2000 mm Height, Power supply- 440A/C Volt (Three phase), 220 A/C Volt (single phase),
268	13 Passengers (1040 Kgs)G+4 Upper Floors: Installation, testing and commissioning of elevators/ escalators at site as listed under Technical Specifications: Type of lift- Passenger lift, Travel Height- 18 mtrs., no. of stops- 6 stops, overhead height- 4500 mm, pit required - 1500mm, load - 13 passengers (1040kg.), speed - 1m/s, Drive- Micro Processor based VVVF, Design of Car- Stainless Steel Hairline and Mirror Finish, Door entrance- 700 mm Width x 2000 mm Height, Power supply- 440A/C Volt (Three phase), 220 A/C Volt (single phase),
269	CCTVSupplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required.1 run of cable
270	Supply, installation, testing and commissioning of 4 mega pixel bullet camera having 1/3” 4Megapixel progressive CMOS, H.265 & H.264 dual-stream encoding, 20fps @ 4M (2688×1520) &25/ 30fps @ 3M (2304×1296), WDR (120dB), Day/Night(ICR), 3DNR, AWB, AGC, BLC , Multiple network monitoring: Web viewer, CMS(DSS/PSS) & DMSS, 2.8 mm fixed lens (3.6 mm optional), Max IR LEDs Length 30m and IP67, PoE with connection box and stand on existing pole/wall/surface inclusive of all work
271	Supply, installation, testing and commissioning of 8Channel NVR with H.265/H.264 codec decoding, Max 200Mbps Incoming Bandwidth,Up to 8MP Resolution for Preview and Playback, HDMI/VGA simultaneous video output, Support ANR technology to enhance the storage reliability when the network break down , 4K Resolution complete with connecting HDMI cable
272	Supply, installation, testing and commissioning of 8-port gigabit unmanaged desktop PoE switch with 8 x 10/100/1000BASE-T ports interface, 16Gbps Switching fabric, 68W power budget, IEEE 802.3af PoE standards, Gigabit Ethernet-2000 Mbps (full-duplex), Fast Ethernet 100 Mbps (half-duplex)-200 Mbps (full-duplex), Ethernet 10 Mbps (half-duplex), 20 Mbps (full-duplex) data transfer rates
273	Supply, installation and testing of 6TB surveillance hard disk suitable with SATA interface of 6Gb/s supportable upto 64 cameras having MAX sustained transfer rate of 195 MB/s with 256MB cache. Startup current should be 2A at 12V with average operating power of 9W at operating temerature range of 5 to 70 degree celcius and non operating min temeperature tolerence of -40 degree celcius
274	Easy wall mounting 9U rack with lock and key facility having maximum load capacity of 60Kg with facility of cable entry on top and bottom with welded frame, material spcc cold rolled sheet having front toughened glass door with required turning angle having weight not less than 9kg with a proper dimentions of 55x40x23 cm with 6PDU Sockets and Fan facility
275	Supply, installation, testing and commissioning of 50\" android LED screen for CCTV Display with all kind of clamps cables etc
276	Supply, Installation, Testing and Commissioning of 5KVA UPS with a rating of 5000KVA/4000 Watts having a input voltage range of180-260 volts, inpur frequency range should be 45-55 Hz with a output voltage range of 220-250 volts AC, inverter output voltage should be 230 +- 10% volts AC with stepped sine wave form having 192-240V DC system voltage. It should also has indications for on mains, mains fail, on batt, low batt, fault and overload with required number of batteries for atleast 15min power backup6.00Nos53000.000318000.00

Also Visit

Tenders

Uttarakhand Tenders

Construction Tenders

Building Construction Tenders

Building Work Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Construction Of Bus Terminal And Workshop Building For Uttarakand Transport Corporation At Ramnagar, District - Nainital, Nainital-Uttarakhand

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Construction Of Bus Terminal And Workshop Building For Uttarakand Transport Corporation At Ramnagar, District - Nainital, Nainital-Uttarakhand

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us