|
| 1 | Providing wall putty on new surface with approved quality material of Berger/ J.K./Birla or similarmake 2 coats. |
| 2 | Finishing wall with weather coat by premiumacrylic exterior paint applied @ 3.28 ltr/10 sqm (Asian or Berger Brand) of approved make and quality on wall with two or more coat to give an even shade including a priming coat with cement primer ofapproved brandand manufacturer exterior primer applied @ 2.20kg/10 sqm afterthoroughly brushing the surface free from mortar dropping and other foreign matters and sand papered smooth including supply of all materials, labour, Tools & plants etc. required for propercompletion of the work. |
| 3 | S/F MS in heavy sizes suchastrusses ,built up gates, record racks, roof work, Gates etc. including rivetting or welding where necessary. |
| 4 | 100 mm thick (average) mud phaska of damped brick earth on roofs laid to slope consolidated and plaster with 25mm thick mud mortar mixed with Bhusa at 35 Kgs. per cum of earth and gobri looping with mix 1:1 (1 clay and 1 cow dungs) and covered with 1st class flat Tiles bricks grouted and pointed with cement mortar 1:3 (1 cement 3 fine sand) mixed with 2% of integral water proffing compound by weight of cement and finished neat. |
| 5 | Providing and fixing white vitreous china wash basin including makingall connections but excluding the cost of fittings :Surgeon type wash basin of size 660x460 mm DSR 2021 17.25.6 |
| 6 | Providing and fixing kitchen sink including making all connections excluding cost of fittings.White glazed fire clay sink of size 600x450x250 mm DSR 2021 17.26.1 |
| 7 | Providing and fixing vitreous china dual purpose closet suitable for use as squatting pan or European type water closet (Anglo Indian W.C pan) with seat & lid fixed with C.P. brass hinges and rubber buffers, 10 litre low level flushing cistern with fitting and brackets, 40 mm flush bend, 20 mm over flow pipe, with specials of standardmake and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required: |
| 8 | P/F W.C PAN INDIAN STYLE ETC ALL COMPLETE AS PER THE DIRECTION OF ENGINEER IN CHARGE.( C.NO 17.1.1 DSR 2016) |
| 9 | Cistern with fittings for Waterless Urinal |
| 10 | 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms |
| 11 | Providing and fixing C.P. brass bib cock of approved quality conformingto IS:8931 : |
| 12 | Providing and fixing PTMT bib cock of approved quality and colour. |
| 13 | Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. |
| 14 | Providing and fixing C.I. double acting air valve of approved qualitywith bolts, nuts, rubber insertions etc. complete (The tail pieces,tapers etc if required will be paid separately) : |
| 15 | Providing and fixing PTMT Ball cock of approved quality, colour andmake complete with Epoxy coated aluminium rod with L.P./ H.P.H.D.plastic ball. |
| 16 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. (Concealed work including cutting chases and making good the walls etc.) 20 mm nominal outer dia .Pipes. |
| 17 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 20mm nominal bore |
| 18 | Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) |
| 19 | 4 way (4 + 12), Double door |
| 20 | 8 way (4 + 24), Double door |
| 21 | Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 22 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with piano type switch, phenolic laminated sheet, suitable size MS box and earthing the point with 1.5 sq.mm FRLS PVC insulated copperconductor single core cable etc. as required. |
| 23 | P/F JET FOR EUROPEAN SEAT ETC ALL COMPLETE AS PER THE DIRECTION OF ENGINEER IN CHARGE.( C.NO 17.16A DSR 2016) |
| 24 | P/F EXTENSION NIPPLES 25MM ETC ALL COMPLETE AS PER THE DIRECTION OF ENGINEER IN CHARGE. (C.NO.7866 DSR 2016) |
| 25 | P/F 15MM BRASS BIB COCKS SHORT BODY ETC ALL COMPLETE AS PER THE DIRECTION OF ENGINEER IN CHARGE. ( C.NO 18.15.1 DSR 2016) |
| 26 | Providing and Placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 27 | Providing, fixing, jointing and testing in position of ISI marked UV stabilized UPVC pipesfor soil, waste, and vent, Type-B as per IS : 13592 suitable for rubber ring joints, including all necessary specials and fittings (confirming to IS:14735) i.e. bends, tees, junctions (with or without doors), reducing bush, reducers, WC connectors, couplers, cowels, clamps, rubber rings etc. complete.(as per MR) 100 mm dia |
| 28 | Supply and fixing 6 mm. (¼\") China white glazed tiles in flooring or in skirting or dado laid with 1:3 Cement and approved coarse sand mortar finished with white cement slurry, jointing and polishing complete, including supply of all materials, labour and Tools and Plants. |
| 29 | First class Brick Work in (1:4) cement & four coarse sand 2.20 F.M. morter in foundation and plinth and T&P etcall completed as per the direction of engineer - in - charge. (AS PER PWD SOR 2022 PAGE NO 20 SI NO 6.05 ITEM NO 305 (a) |
| 30 | GST |
