|
| 1 | Taking down chowkhats or frames n.exc 1.50 sqm with shutters (without taking off shutters from the frames) complete all as specified and directed. |
| 2 | Taking down chowkhats of frames exc 1.50 sqm but n. exc 4.0 sqm with shutters (without taking off shutters from the frames) complete all as specified and directed. |
| 3 | M&L Box type steel windows and ventilator comprised of tubular frame and shutters made out of 1.25 mm thick M S sheet tube factory made with double side shutters wire gauged shutter & glass glazed shutter (wire cloth and glass panes only shall be measured and paid seperately) with side hung shutters with steel handle and steel peg stay dovetailed or welded incl 2 Nos tower bolts 150 mm long for each leaf and 10 mm square bar grills at spacing as shown on drg welded to FI frame work, including other fittings, hinges, handles, tarred hold fasts, PCC blocks etc all as shown on drg No CEPZ/TD-354/09 sheet 1/3 to 3/3 including two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 4 | S&F pressed steel frame made out of MS sheet 1.25mm thick of size 125x60mm for doors/windows with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including filling of concrete 1:3:6 type C-0 (12.50 mm graded aggregate) back of chowkhats and incl two coats of synthentic enamel paint complete all as specified and directed. |
| 5 | S&F pressed steel frame made out of MS sheet 1.25mm thick of size 105x60 mm for doors/windows with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including filling of concrete 1:3:6 type C-0 (12.50 mm graded aggregate) back of chowkhats and incl two coats of synthentic enamel paint complete all as specified and directed. |
| 6 | S&F 35mm thick, 2nd class hard wood plain framed, panelled (factory made) shutters (two panels) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces, The size of rail and stile as per IS-1003 (Part-I) (Larger size to be provided) kiln seasoned and chemically pressure treated fitted to chowkatscomplete all as specified and directed. |
| 7 | S&F 2nd class hard wood 35mm thick glazed and skeleton door shutters factory made, open rebated and prepared to receive glass or gauge etc with rounded, chamfered or mitred sash bars edges of framing plain chamfered or rounded fitted with cut and mitred beads and fitted to chowkats for securing glass/gauge, size of stiles rails and other parts as per clause 8.20 (a) of SSR Part-I 1991 (Larger size to be provided) complete all as specified and directed |
| 8 | S&F for powder coated anodised aluminium frame for doors, windowS, ventilators with one or more rebates including joining cleat for fixing of glass, particle board,aluminium frame etc complete all as specified and directed |
| 9 | S & F powder coated anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified |
| 10 | M & L preparation of new wood or wood based surfaces of any descriptionover 10 cm width or girth and applying two coats of synthetic enamelpaint over a coat of pink primer complete all as specified and directed. |
| 11 | M&L for hacking out old broken glass ( any thickness , size, quality, or description) from metal frame glazed with putty or fixed with beads/ clips complete all as specified and directed. |
| 12 | S&F Galvanised mild steel wire cloth 0.56 mmnominal dia of wire and average width of aperture 1.40 mm fixed with tinned tacks, or galvanized wire staples complete all as specified and directed.. |
| 13 | M&L for framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed. |
| 14 | M&L prepration of new steel surface with two coats of synthetic enamel paint over a coat of red oxide primer all as specified and directed. |
| 15 | M&L for dismantling plain or corrugated steel/AC sheeting, any gauge, thickness etc, rubbish off the premises complete all as specified and directed. |
| 16 | S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roofcovering/cladding to wall, fixed with self tapping screws including dismentling of the same as specified and directed. |
| 17 | S&F Pre-painted galvalume 0.5mm thick high strength plain sheeting with aluminium zinc coating and 600mm width of anecofriendly colour coating not less than 25 micronhaving tensile strength of 550 Mpa as in ridges, fixed with self tapping screws as required, etc complete all as specified and directed. |
| 18 | False ceiling of 9.5mm thick gypsum tiles (600x600mm) laminated with PVC film on the face side & metalised polyester film on the back side with all four edges sealed with PVC film (shade either plain white or crack) fixed using T grid/Cross-T/Wall angle/level clip & suspenders of standard galvanised sections in a grid size of 600x600mm from manufacturer M/s Saint Gobain or equivalent of Armstong/Everest including taking down existing ceiling board & grid work etc of any type/pattern etc complete all as specified and directed.Note :- Invoice from company’s authorized dealer shall be submitted with material by the contractor along with dealership certificate.Certificate of genuineness from the manufacturer shall also be submitted by the contractor before getting the material passed from the department. |
| 19 | S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty or fixed with bead / glazing pins in squares size n.exc 0.5 sqm in each pane complete all as specified and directed. |
| 20 | S&F 300 mm long aluminium alloy, sliding door bolt withhasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts complete all as specified and directed. |
| 21 | S&F for aluminiumanodized barrel tower bolts 200 mm of extruded section and fixed all as specified and as directed. |
| 22 | S&F 150 mm size aluminium alloy handles, febricated type extruded section, ISI markedall as specified. |
| 23 | S &F in repairs 300 mmMS Rat tail door spring for door closer,complete all as specified and directed |
| 24 | S&F in repairs butt hinges 100 mm,heavy weight,cold rolled mild steel complete all as specefied and as directed. |
| 25 | Taking down cement plaster on brick walls or stone walls any descrition etc including raking out joints, hacking for key, scrubbing down with water etc all as specified and directed. |
| 26 | M&L Rendering 10mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar (1:6) finished even and smooth without using extra cement complete all as specified and as directed. |
| 27 | M&L Rendering 05 mm thick cement plaster on faces of brick work or concrete surfaces in cement mortar (1:3)as in ceiling finished even and fair without using extra cement all as specified and directed. |
| 28 | M&L Rendering 15mm thick in two layers (base layer 10mm & finishing layer 5mm thick) in cement mortar (1:4) using liquid water proofing compound in finishing layer on brick work or concrete surfaces of wall, surfaces finished even and smooth without using extra cement, etc complete all as specified & directed.(Note : WPC shall be measured and paid separately) |
| 29 | M&L for rendering or plastering work 10mm thick in CM 1:3 in fascia / edging / ceiling of Chajjas,roof projections etc, including taking out peeled off plaster / concrete and making the line in true shape and finishing the surface without using extra cement complete all as specified & directed. |
| 30 | M&L for Preparation of new plastered surface of external wall and chajjasand making the surface smooth with sand paper andpriming the surface with alkali resistance primer paintfor external surface, over primed surface applying two coat of cement base paint incl curing complete all as specified & directed. |
| 31 | M&L for Preparing new wall surface including making surface clean, dry and free from any loose paint film, dirt, chalk, grease, fungus and algae and applying two coats of acrylic , antifungal emulsion exterior weather proof paint on external surfaces,complete all as specified & directed. |
| 32 | M&L for Preparation of new plastered surface of wall by applying 2mm thick wall care putty and making the surface smooth and applying two coat of oil emulsiondistemper over a coat of primer complete all as specified & directed. |
| 33 | M&L three coats of white wash on surface of wall including preparation of new plastered surface complete all as specified & directed. |
| 34 | M&L three coats of white wash on surface of ceiling including preparation of new plastered surface complete all as specified and directed. |
| 35 | M&L two coats of white wash on surface of wall including preparation of old plastered surface after complete removal of existing treatment complete all as spd and directed. |
| 36 | M&L one coats of white wash on surface of ceiling including preparation of old plastered surface complete all as specified and directed. |
| 37 | M&L for Preparation of old surface after complete removal of existing treatment making the surface smooth and applying two coat of cement base paint over a coatofalkali-resistant priming paint all complete all as specified & directed. |
| 38 | Demolition of cement concrete (un-reinforced) in ground floors and pavings n. exc. 15cm thickness (below or above ground level), removal of rubbish complete all as specified and directed. |
| 39 | M&L for Cement concrete type C-1, 1:3:6 (using 20mm graded aggregate) as in plinth protection and paving 75mm thick laid in slope finished even and fair incl making joints at every 2.5 m and at corner filled with bitumen 85/25 and sand in ratio 1:2 by weight and complete all as specified and directed. |
| 40 | Dismantling old floor tile incl cement mortar bedding and removal of debris out of premises completeall as specified and directed. |
| 41 | M&L for non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqmbut not exceeding 0.38 sqmin floorsetc set and jointed(joint free) in neat cement slurry and pointed in coloured cement. overscreed bed or bedding layers of mortars 15 mm thick in CM 1:4 for layingfloor finishes complete all as specified and directed. |
| 42 | M&L for non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqmbut not exceeding 0.36 sqmin skirting/dado/risers of steps etc set and jointed(joint free) in neat cement slurry and pointed in coloured cement. incl rendering 10mm thick in CM (1:4) and finished rough, incl taking down cement plaster on walls etc complete all as specified and directed. |
| 43 | M&L glazed ceramic coloured tiles in vertical surface 450x300x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match incl rendering 10mm thick in CM (1:4) and finished rough, incl dismantlingfloor, hearth or wall tiling including cement mortar bedding ( but not backing removing serviceable tiles from site and rubbish off the premises complete allas spd & directed. |
| 44 | M&L 20 mm thick Granite (of any type) work (table rubbed & polished) in steps, jambs, pillars, window-cills cooking platforms & like in cement mortar (1:4) including pointing into white cement (1:2) using marble dust with admixture of pigment to match shade of granite over 15 mm thick cement screed in CM 1:4 including Roughening surfaces of old concrete floor by picking,sweeping clean and washing down with water to remove dust etc and brusing neat cement slurry with 3.00 kg per sqm complete all as specified and directed. |
| 45 | M&L for Round chamfering,to the edgesof graniten.exc 15mm wide on granite stone shelves. |
| 46 | S&F Stop valve/ Angle valve cast copper alloy (ISI Marked) chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe 15mm bore dia, in reapirs complete all as specified and directed. |
| 47 | S&F in repairBib taps for 15 mm bore pipe, cast copper alloy fancy type chromium plated fixed in repairs ofcomplete all as specified and directed. |
| 48 | Taking up or down steel water tubing and connections including cleaning for refixing or removal to store for bore of pipe 15mm bore dia complete all as specified and directed. |
| 49 | Taking up or down steel water tubing and connections including cleaning for refixing or removal to store for bore of pipe 20mm bore dia complete all as specified and directed. |
| 50 | S&F 15mm bore tubes medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor, ceiling etc complete all as specified and directed. |
| 51 | M&L for cutting chases pinning in brick mas and making good to facing where required and pointing in cement and making good in CM 1:3 cutting n.exc. 10 cm in girth complete all as specified and directed. |
| 52 | S&F 20mm bore tubes medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor, ceiling etccomplete all as specified and directed. |
| 53 | M&L for Rotational moulded polyethlene water storage tanks of capacity exc 1000 litres three layers(cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete including 20mm dia ball brass valve high pressure with polythene float and dismantling of existing PVC tank of any capacity complete all as specified & directed. |
| 54 | S&F Grating doom 100mm dia of PTMT (Minimum weight 25gms) complete all as specified and directed. |
| 55 | S&F in repair 20 mm size gun metal globe or gate valves with iron wheel head, screwed both endsfor iron pipe and fixedcast copper chromium plated fancy type alloy ISI marked with crutch or butter fly handles screwed down screwed for iron pipe of 20mm bore. |
| 56 | S&F 600 mm x 450 mm bevelled edge mirror of selected quality glass mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 57 | S & Fin repairs Vitreous china wash basin, white flat back,size 550 x 400 mm including waste pipe , brackets and cutting for and pinning in ends of brackets or errecting standand 32 mm diaPVC waste pipefixed in repair including waste copling 32mm size full thread complete all as specified and directed. |
| 58 | S&F 15mm bore pillar cock fancy type, screwed down high pressure with or without letters hot or cold with long screwed shank and fly nuts screwed for iron pipe ISI marked add if fixed in repairs complete all as specified & directed. |
| 59 | S&F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed. |
| 60 | S&F in repair towel rail CP (Brass) 600 mm long complete all as specified and directed. |
| 61 | S&F sinks with drainage board made of stainless steel 1mm thickkitchen with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915x460mm bowl size 410mm x 330mm x 160mm in repair complete all as specified and directed. |
| 62 | Demolition of cement concrete (unreinforced) of any description and in any position not specifically provided for and removal of demolished materials complete all as specified and as directed. |
| 63 | M&LPCC 1:2:4 type B-0 padding in patches as roof , surface finished even and smooth without using extra cement |
| 64 | M&L 20mm thick cement plaster in cement mortar 1:4 on concrete surface finished even and smooth using WPC liquid of make Dr. Fixit or STP as per manufacturer instruction @ 0.200 ltr in 50 Kg of cement complete all as specified and directed. |
| 65 | M&L for APP modified roof treatment over existing non-accessible RCC roof slab / chajjah / canopy / parapet wall to be executed through approved applicator of the membrane manufacturer with following specification etc complete all as specified and directed :-(a) Cleaning existing surface properly, applying oil bound bitumen primer @ 0.30 liter/Sqm manufacture by the same agency as that of APP with a density 0.87-0.89 Kg per liter at 25 degree centigrade on prepared surface, laying not less than 3.6mm thick APP modified water proofing membrane weighing not less than 3.60 Kg/Sqm reinforced with non woven polyster fiber weight not less than 160gsm/Sqm using butane torch by torch application with 10cm side laps and 15cm end lap. (b)Top of membrane shall be provide with solar reflective bituminous aluminium paint @ 0.1 Kg/Sqm as prescribed by manufacture of membrane. |
| 66 | Supply only liquid water proofing compound |
| 67 | Material and labour for Providing and injecting chemical emulsion for post constructional anti-termite treatment along the external wall below concrete or masonary apron using chemical emulsion @ 2.25 litre per linear meter including drilling and plugging of holes etc in apron/plinth protection complete all as specified in IS-Code 6313 Part (3) : 2001 complete all as specified and directed. |
| 68 | Material and Labour for Providing and injecting chemical emulsion for post constructional anti-termite treatment of soil under existing floors using chemical emulsion @ one litre per hole 300 mm apart along the junction of floor and wall, along joints in floors including drilling and plugging 12 mm dia holes with cement mortar 1:2 to match the existing floor complete all as specified in IS code-6313 Part (3) : 2001 complete all as specified and directed. |
| 69 | M&L for Formwork to sides and soffits of floor or roof beam, beam hauchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. finished in rough finished concrete complete all as specified |
| 70 | S&F Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, etc complete all as specified and directed. |
| 71 | S&F Mild steel TMT bars5mm dia & over but upto & including 10mm dia in stirrups, spacers & binders, cut to length, bent to shape required, including cranking, bending, spirally for hooping for column, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 72 | Demolition of brickwork built in cement mortar including all quions ,arches,pillars etc but excluding ashlar facings dressed stonework and pre cast concrete articles, removal of rubbish complete all as specified and directed. |
| 73 | M&L for Brick work with Fly Ash Brick (Non-Modular)straight or curved on plan exceeding 6m mean radius built in CM (1:6), etc complete all as specified and directed. |
| 74 | All as per item 73 but(except bricks) |
| 75 | S & FCurtain rods 20 mm, anodised aluminium alloywith bracket , fenials, fancy type, fixed in postion (as per sample) complete all as specified and directed. |
| 76 | Dismantling of existing framed trusses of span n.exc 10mtrand refixing of trusses on base plate anchore with holding down screw measured and paid separately including two coats of synthetic enamel paintcomplete all as specified and directed. |
| 77 | Dismantling of rolled mild steel as in tubular purlins, rafters etc and refixing of purlins, rafters on trusses including necessary cleats etc. including two coats of synthetic enamel paint after preparation of old steel surface complete all as specified and as directed. |
| 78 | S&F steel works in tubular trussspecial shaped washer etc complete using ERW or induction butt welded tubes conforming to IS-1161-1979 GRADE st-240 incl two coats of synthetic enamel paint over one coat of red oxide, complete all as specified and directed. |
| 79 | S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 45.0cm long,16 mm diameter of shank, complete all as specified and directed. |
| 80 | M& L steeliron base plateplugs, bolts, and screws of Fe 410-W(Gde-E-250 Quality -A)complete all as specified and directed. |
| 81 | M&L for 75mm thick PCC (1:3:6) type C-1 using 20mm graded crushed stone aggregateas inplinth protection laid in panels and joints filled with mix of bitumen and sand (1:3) by weight, finished the surface even and smooth without using extra cement etc complete all as specified and directed. |
| 82 | M&L hardcore of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15cm thick, watered and rammed to a true surface with broken boulders or stone etc complete all as specified & directed. |
| 83 | M&L for Sand filling under floors or in foundation including watering and consolidation complete all as spd and directed. |
| 84 | M&L for Cement concrete 75 mm thick type D-2,1:4:8 (40mm graded crushed stone aggregate) as in subbase, rough surface complete all as spd and directed. |
| 85 | M&L Cement concrete (1:2:4) type B-1 (using 20mm graded crushed stone aggregates)as in benching, coping, Bed blocks and the like, rounded or chamfered on edges including use and waste of necessary formworketc complete all as specified and directed. |
| 86 | M&L Machine pressed precast concrete pre-laminated coloured interlocking paver block any shape and conforming IS 15658-2006 of 60mm thickness M-35 grade complete all as spd and directed. |
| 87 | M&L RCC 1;2:4 tye B-1 using 20 mm graded crushed steon agg as in Beams, cantilevers, bressummers, lintels over 1.5m spanthe likeincl demolition of brick work /reinforced cocnrete etc and removal of debris out off the premises etc complete all as specified and directed. |
| 88 | Use and waste of form work to soffits of suspended slab such as roof slab, floor slab, landing and similar work not exceeding 200mm thick surface flat for rough finished surface of concrete complete all as specified and directed. |
| 89 | Use and waste formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide complete all as specified and directed. |
| 90 | M&L 25mm thick cement concrete (1:2:4) type B-0, as leveling course in flooring (using 12.5mm graded crushed stone aggregates) surface finished even and rough to receive floor topping etc complete all as specified and directed. |
| 91 | M&L Mild steel work using angle and flat iron section in frame for Desert cooler stand and similar work conforming to Fe 290 (Gde E-165) including welding and application of two coats of synthetic enamel paint over a coat of red oxide primer on exposed surface, etc complete all as specified and directed. |
| 92 | S&F 150mm long floor door stopper of aluminum alloy body & tongue, anodized, with hard drawn steel spring, fixed with screw etc complete all as specified and directed. |
| 93 | S&F Brass Wardrobe hooks (single) of size 50mm to 60mm long fixed with screw etc complete all as specified and directed. |
| 94 | Excavation over area not exc 1.5 m deep in any type of soil and getting out complete all as specified and directed. |
| 95 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in any type of soil complete all as specified and directed. |
| 96 | All as per item srl no 95 here-in-before but exc 1.5m and n.exc 3m. |
| 97 | Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25cm thick, etc complete all as specified and directed. |
| 98 | Removing excavated material (soil) to a distance not exc. 50m and depositing where directed, etc complete all as specified and directed. |
| 99 | M & L Cement concrete 1:3:6 type C2 using 40 mm graded crushed stone aggregates in foundation filling and mass concrete etc complete all as specified and directed. |
| 100 | M&L 100mm thick cement concrete (1:2:4) type B-2, as leveling course in flooring (using 40mm graded crushed stone aggregates) surface finished even and rough etc complete all as specified and directed. |
| 101 | M&L RCC M-25 (Design mix) using 20mm graded crushed stone aggregate as in slab supported on wallsetc complete all as specified and directed.(Note: Formwork & reinforcement shall be measured and paid separately) |
| 102 | M&L Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, builtin cement mortar 1:4 etc complete all as specified and directed. |
| 103 | M&L Extra over stone walling for hammer dressing to face stones and dressing of face beds and joints as specified of random rubble walling, coursed, hammer dressing with maximum depression on face from straight edge held against the dressed surface n.exc 40mm on lime/sand stone etc complete all as specified and directed. |
| 104 | M&L Flush pointing to brick /Stone walls in cement mortar 1:3 etc complete all as specified and directed. |
| 105 | S&F75mm bore PVC (SWR) pipes single socketed,inanylength with rubber ring joints, laid as in weep holesetc complete all as specified and directed. |
| 106 | M&L for providing Precast cement concrete 1:3:6, type C-1 (using 20 mm graded crushed stone agg) as in PCC bonders set in CM 1:6 all ascomplete all as specified and directed. |
| 107 | M&L for Boulder filling dry hand packed tightly as in back of wall complete all as specified and directed. |
| 108 | M & L for Reinforced concrete pipes, class NP2, bore of 300 mmlaid and jointed complete with collars complete all as specified and directed. |
| 109 | M&L Concrete bed 150mm thick to drain pipe 300mm bore including packing under and haunching against the sides of pipe after they are laid and tested in cement concrete 1:3:6 type C-2 (Using 40mm graded crushed stone aggregate) etc complete all asspecified & directed. |
| 110 | Taking down carefully unsv copper/aluminiumpoint wiring of ceiling fan/exhaust fan point including fixture and fittingssuch as switches, sockets, ceiling rose, regulators, etc and removing dismantled/demolished, debris materials from sitecomplete all as specified and directed. |
| 111 | M & L for point wiring using 3 x 1.5 Sqmm FRLS PVC insulated unsheathed /multi stranded copper conductor cable(Phase, neutral and earth wire) drawn through and incl concealedconduit medium grade of dia not less than 20mm and 1.8mm thick and connected to common earth dolly with 1.6 mm thick cadmium platedCI/GI pressed steel sunken boxes and 3 mm thick plastic laminated sheet cover fixed with brass screws including cutting grooves for concealed wiring for light/fan/bell point controlled by one 1way swtich complete all as specified and directed. Note: 1. Conduitshall be fixed on surface of ceiling with necessary saddles where concealing of conduit is not feasible.2. Connections of cable with MCBs or switch/sockets shall be done through proper size copper/brass pin/U type thimbles. |
| 112 | All as per Srl item No 111 here-in-before but for one 5 pin 5 Amp socket outlet point on same board controlled by one switch SP, one way 5 Amp, 240Volts complete all as specified and directed. |
| 113 | All as per Srl item No 111 here-in-before but for one 5 pin 5 Amp socket outlet point on inependent board controlled by one switch SP, one way 5 Amp, 240Volts complete all as specified and directed. |
| 114 | All as per item No. 111 above butwith 3 x 2.5 Sqmm for 15 Amps socket/power point complete all as specified and directed. |
| 115 | S&F in replacement switch piano flush button single pole one way 5 amp 240 volts complete all as specified and directed. |
| 116 | S&F in replacementSocket outlet 2 in 1, 3 pin, 5 amps, flush type, 240 volts complete all as specified and directed. |
| 117 | S&F in replacementswitch 15 Amps, flush type with shutters, 240 volts complete all as specified and directed. |
| 118 | S&F in replacementSocket outlet 2 in 1, 3 pin, 5 and 15 Amp flush type, 240 volts complete all as specified and directed. |
| 119 | S&F in replacementstepped type electronic fan regulator flush type Socket type on the existing phenolic laminated sheet etc. not less than 100 W flush type complete all as specified and directed. |
| 120 | S&F in replacementceiling rose PVC/polycarbonate, insulated body surface Bakelite 65mm dia three terminals complete all as specified and directed. |
| 121 | S&F in replacement Lamp holder jumbo type, PVC/Polycarbonate type with back plateincl 15W LED lamp complete all as specified and directed. |
| 122 | M&L for sub Main Wiring with two single core PVC insulated unsheathed multistranded flexible copper conductor cable of size 2x6 sqmm and one single core PVC insulated multistranded unsheathed flexible copper conductor 6 sqmm size (green colour) cable as earthing lead connecting to main earthing dolly drawn in and including non metallic PVC concealed conduit complete andmaking good to disturbed surface of wall/floor with cement mortar and finishes to match existing surfaceincl taking down old unsv sub main wiring of any type complete all as specified and directed. |
| 123 | S&F in replacement20W surface / wall mounted box type batten LED luminaire,Polycarbonate housing with PC diffuser and integrated electronic driver with high efficiency long life, CRI = 80 (Minimum), PF > 0.95, luminous efficacy > 100 lumens/Watt operating voltage 140V-240V, CCT=5700+/-300K, THD < 10% complete with all accessories internally prewired and including connecting up with 3 core flexible copper conductor cable of suitable size from ceiling rose to connector of LED fitting complete all as specified and directed. |
| 124 | S&F in replacement Energy saving, surface mounted, bulk head LED luminaire 10 Wcomplete including connecting up with three core twisted flexible copper conductor cable of suitable size complete all as specified and directed. |
| 125 | S & F in replacement SPN MCB DB 12 way sheet metal enclosures double door 230 V AC, 50 Hz AC with IP 43 and IK 09 rating having fully insulated copper busbar of rating not less than 100Amps, insulated neautral bar, earth bar and cable ties for cable managementincluding polyuthrene gasket complete all as specified and directed |
| 126 | All as per Srl item No 125 here in before but for size 8way complete all as specified and directed. |
| 127 | S&F in replacement MCB SP 240V, 50Hz of rating6 to 32 Amp with breaking capacity of 10 kA having bi-connect terminals on the bottom terminals for looping and 35Sqmm termination capacity on both terminals with insulated sliding shutters and two position DIN rail clamp for easy mounting complete all as specified and directed. |
| 128 | All as per Srl item No 127 here in before but forMCB SPN 240V, 50Hz, 10 KA,of rating 40-63Amp. |
| 129 | M&Lforearthing complete with G .l earth plate electrode 60 cm x 60 cm x 6 mm thick burrieddirectlyinground( earth pit notless than 2.25 m deep below GL ) with top edge of the plate not less than 1.5 mbelow the normal groundlevelconnectedgalvanized earth lead wire 4.0 mm bymeansofbolts, nuts, check nuts and washers of galvanised ironorsteelincluding necessaryexcavation& earth work in any type of soil, removing surplus soil to a distance not exc 50mtr,including PCC chamber in PCC (1 : 2 : 4), type B1, using (20 mm graded stone aggregate), mild steel frame madeout of angle iron of size 40 mm x 40 mm x 6 mm thick duly painted with two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer hinged with and including 6 mm thick Cl coverwith handle , watering arrangement with funnel internally secured with wire mesh with 20 mm dia lightgrade GI pipe for watering, 15 mm dia mediumgrade Gl pipe for earth wire protection with and including alternate layer of charcoal dust and common salt. complete all as shown in electrical plate No 3connectedto DBs all as specified and indicatedincluding testingon completion. |
| 130 | Taking down old ceiling fans and exhaust fans and cleaning, greasing, servicing and carrying out minor repairs such as replacement of canopy set, PVC round sheet, clamps, fan blade, screws, check nuts, exhaust fan louver round shaped etc incl painting with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc and refixing at same location and connecting up with 3 core flexible copper conductor of 0.50 sq mm complete all as specified and directed. |
| 131 | M&L for XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 16 Sq mm 2core. laid in trenches, fixed along wall, through GI pipe under floor/Road including dismantling existing service cable of any size from electric pole to building, complete all as specified and directed. |
| 132 | M & L for sand filling in trenches dry and and clean sand unwashed including punning around cable for protection of under ground cable complete all as specified and directed. |
| 133 | M & L for well burned bricks , laind flat ( old size) sub class B designation 75for cable protection copmplete all as specifed and directed. |
| 134 | M & Lfortube , lightgrade galvanised of40mmbore withallfittingslaidintrenches/through wall / underroad/floor or pole by means of FI clamps, nuts bolts and washers complete all as specified and directed. |
| 135 | Deduct Total amount of SCHEDUL \"A\" SECTION-II (SCH OF CREDIT) Rs 45317.00 ( to be deducted from Schedule ‘A’ (BOQ) to arrive at the Contract Sum. |
