|
| 1 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: inAll kinds of soil : |
| 2 | Providing andlaying handpackedstonesolingin foundation under floors etc including rammingwateringand consoldatingcomplete cost andcarriageofall materail involveduptosite ofwork complete. |
| 3 | CEMENT CONCRETE (CAST-IN-SITU) Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 4 | CEMENT CONCRETE (CAST-IN-SITU) Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 4.4.6 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) |
| 5 | supplyandfillingof G. B. S underfloors includingwatering, ramming andconsolditingnwithhardrammer withaggregatesize notexceeding 90 mm includingcost ofcarriageofall materialsinvolved uptosite ofworkcompleted |
| 6 | Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 7 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo-Mechanically Treated bars of grade Fe-500D or more |
| 8 | Centering and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns etc. for mass concrete. |
| 9 | Centering and shuttering including strutting, propping etc. and removal of form for: Lintel, beams, plinth beams, girders, bressumers and cantilevers |
| 10 | Centering and shuttering including strutting, propping etc. and removal of form for:Columns, pillars, piers, abutments, posts and struts. |
| 11 | Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platforms. |
| 12 | Centering and shuttering including strutting, propping etc. and removal of form for:Stairs (excluding landings) except spiral staircases. |
| 13 | Providing and fixingofHessonbased selffinishedbitumenfelt (TRAFELT)weighing2.3kg /sqmwith alayer of30/40 bitumen. |
| 14 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in Cement mortar 1:6 ( 1 cement : 6 coarse sand) |
| 15 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): 2nd class deodar wood |
| 16 | 15mm Cement plaster on the rough side of single or half brick wall of mix: 1 : 6 ( 1 cement : 6 fine sand) |
| 17 | Providing and applying Plaster of Paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete |
| 18 | Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butthinges bright finished of required size with necessary screws. 2ndclass deodarwood |
| 19 | Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge :2nd class deodar wood |
| 20 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately). 2ndclass deodar wood |
| 21 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick using 2ndClass deodar wood |
| 22 | Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 11.3.1 25mm thick with 12.5 mm nominal size stone aggregate. 11.3.2 40mm thick with 20 mm nominal size stone aggregate. 11.3.3 50 mm thick with 20mm nominal size stone aggregate |
| 23 | VITRIFIED FLOOR TILES Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mm |
| 24 | Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent |
| 25 | CERAMIC GLAZED TILES Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete |
| 26 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete |
| 27 | Providing andfixing ofbudloo wood hand rail covered out of75 mm x 100 mm section with necessary chamfers androunding at top and sides including 40 mm x 6mm recess at bottom to receive the steel rail top. |
| 28 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.Welded |
| 29 | Providing and fixing precoated galvanized iron profile sheets (size, shapeand pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05 %) total coated thickness with zinc coating 120 grams per sqm as perIS: 277, in 240 mpa steel grade, 5-7 micronsepoxy primer on both side ofthe sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape |
| 30 | Providing and fixing plained eaves boarding300x40 mm (nominal size) using2ndclass d eodarwood |
| 31 | Providing andfixing of12 mmthick T&G planks mad eofimportedwood(Newzelandpineorequivalent) for roofsoffitsand sealings omwoodworkin falseceiling,partitations , swanandputupin positionBudloowood (ceiling, josists ) including cost of necesary adhusiveand cost ofnailsetc.with necessary cronicof requiredsixze completejob includingcost ofnailssecrewsallcompleteasapprovedbyEngineercharge( Includingcost ofall material , leads,liftsandcarriageetc upto site of work) |
| 32 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand :6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth and curing complete |
| 33 | Stone work, ashlar sunk or moulded or sunk and moulded upto floor five level in cement mortar 1:6 (1Cement: 6 coarse sand) including pointing with white cement mortar 1:2 (1 White cement: 2 Stone Dust) with an admixture of pigment matching the stone shade and curing complete. A Red sand stone Stone work, ashlar sunk or moulded or sunk and moulded upto floor five level in cement mortar 1:6 (1Cement: 6 coarse sand) including pointing with white cement mortar 1:2 (1 White cement: 2 Stone Dust) with an admixture of pigment matching the stone shade and curing complete. White sand stone |
| 34 | Stone work, plain in copings, cornices, string courses and plinth courses, upto 75mm thick, in cement mortar 1:6 (1 cement : 6 Coarse sand) including pointing with white cement mortar 1:2 (1 cement : 2 Stone dust)with an admixture of pigment matching the stone shade& curing complete.White sand stone |
| 35 | Applying priming coat With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) |
| 36 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade Two or more coats on new work |
| 37 | Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with10 mm diameter bolts, nuts and wooden plugs and embeddings in cementconcrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 gradedstone aggregate 20 mm nominal size). |
| 38 | Providign andfixing ofdoors windows stard wirefittings (A)TBolts 100 mm |
| 39 | Providign andfixing ofdoors windows stard wirefittings (A)TBolts 150 mm |
| 40 | Providign andfixing ofdoors windows stard wirefittings (B)Handles 125 mm |
| 41 | Providign andfixing ofdoors windows stard wirefittings 150 mm |
| 42 | Providign andfixing ofdoors windows stard wirefittings © L-DropLinks 200 mm |
| 43 | Providign andfixing ofdoors windows stard wirefittings © L-DropLinks 300 mm |
| 44 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level white P.V.C flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:18.2.1 W.C. pan with ISI marked white solid plastic seat and lid |
| 45 | Providing and fixing wash basin with C.I brackets, 15mm C.P. brass pillar taps, 32 mm C.P.brass waste of standard pattern, including painting of fittings, and brackets, cutting andmaking good the wallswherever required : White viterous China Surgeon type wash basin size 660x460 mm with single 15 mm C.P brass pillar taps with elbow operated levers ISI marked |
| 46 | Providing and fixing Stainless steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required 510x1040mm bowl depth 225mm |
| 47 | Providing and fixing 8 mm dia C.P / S.S Jet with flexible tube upto 1 metre long with S.S. triangular plate to European type W.C of quality and make as approved by Engineer-in-charge |
| 48 | Providing and fixing P.V.C waste pipe for sink or wash basin including P.V.C waste fittings complete 32 mm dia |
| 49 | Providing and fixing 600x120x5mm glass shelf with edges round off supported on anodized aluminum angle frame with C.P brass brackets and guard rail complete fixed with 40mm long screws, rawl plugs, etc. complete. |
| 50 | Providing and fixing toilet paper holder 18.34.1 C.P brass |
| 51 | Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour: Waste coupling 38mm of 83mm length and 77 mm breadth weighing not less than 60 gms. |
| 52 | Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with a minimum distance of 37 mm from wall face with concealed fittings arrangements of approved quality and colour, weighing not less than 88 gms. |
| 53 | Providing and fixing 100 mm sand cast iron grating from gully trap. |
| 54 | Providing and fixing G.I pipes complete with G.I fittings and clamps, including cutting and making good the walls etc : 15mm dia . Nominal bore |
| 55 | 20mm dia nominal bore |
| 56 | 32 mm dia nominal bore |
| 57 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete 15 mm nominal bore. |
| 58 | Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS :8931 |
| 59 | Providing and fixing 15mm nominal bore C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. |
| 60 | Providing and fixing 15 mm nominal bore C.P. stop cock (concealed) of standard design and of approved make conformingto IS : 8931 |
| 61 | Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS: 893 |
| 62 | Providing and fixing C.P Brass extension nipple (size 15mm x 50mm) of approved make and quality as per directions of Engineer-incharge. |
| 63 | Providing and fixing 15 mm nominal bore of standard back type C.P. brass close hole basin mixer pillar tap of approved quality and make weighing not less than 1.970 kg. |
| 64 | Providing and fixing PTMT soap dish holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms. |
| 65 | Providing and fixing un plasticized P.V.C connection pipe with PTMT nuts, collars and bush of approved quality and colour 15 mm nominal bore with 45 cm length. |
| 66 | Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour 25 mm nominal bore,weighing not less than 62 gms. |
| 67 | Cutting holes up to 30x30 cm in walls including making good the same: 19.67.1 with common burnt clay (non modular)bricks |
| 68 | Cutting holes up to 15x15 cm in R.C.C floors and roofs for passing drain pipe etc, and repairing the hole afterinsertion of drain pipe etc. with cement concrete 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof. |
| 69 | Providing and fixing G.I Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (new work) 32 mm nominal bore |
| 70 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour: 600mm long towel rail with total length of 645 mm, 78 mm wide and effective height of 88 mm, weighing not less than 190 gms. |
| 71 | Providing in position storage type hot water electrical horizontal heaters with copper container, insulation, and stove anameled MS jacket throsatatically controled immersion heater with piolt lampt 15/20 mm dia inlet with non return valve and 15/20 mm dia outlet inlcuding making connections complete in all respects (wall mounted with suitable MS bolts and nuts). |
| 72 | Providing and fixing of PVC pipe and Fittings of Standard quality and make (P-type) prince of equilient including jointing testing complete 100 mm |
| 73 | 75 mm |
| 74 | 50mm |
| 75 | Plain bend 100 mm |
| 76 | 75 mm |
| 77 | 50mm |
| 78 | Door Bends 100 mm |
| 79 | 75 mm |
| 80 | Door Junctions 100 mm |
| 81 | 75 mm |
| 82 | Floor Trap 100 mm dia |
| 83 | P-Trap 100 mm dia |
| 84 | Tee 100x100x100 |
| 85 | TEE 75x75x75 |
| 86 | TEE 50x50x50 |
| 87 | Covel 100mm, 75mm |
| 88 | Providing and fixing in position polyethylene septic tank type B (comfort of equilant) having capacity for 20 users 47\"x51\"x119\" inches in size including excavation of pit as per the size, providing and lying in 1:4:8 mix filling the septic tank with fresh water, connecting the in-let and out-let with the septic tank and filling the dry course of sand and bajree around the septic tank complete job. including carriage of all material involved. |
| 89 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc, (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lifts upto 1.5 m, including getting out excavated earth as directed: includingdewatering if required. All kinds of soils. |
| 90 | Dry random rubble masonry with hard stone in foundation and plinth: without bond stone all complete job |
| 91 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All woks upto plinth level 1:2:4 (1 cement : 2 coarse sand: 4 graded stone aggregate 20 mm nominal size) |
| 92 | Centering and shuttering including strutting, propping etc, and removal of form for: Suspended floors, roofs, landings, balconies and access platforms |
| 93 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI: 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank |
| 94 | Supplying and installation of 2 HP water pump (mono black type kirloskar/crumption greeves including all complete fitting what so ever required at site |
| 95 | Constructing brick masonry chamber for underground C.I inspection chamber and bend with common burnt clay non modular) bricks of class designation 7.5 in cement mortar 1:4 (1 cement: 4 coarse sand) C.I cover with frame (light duty) 455x610 mm internal dimensions |
| 96 | Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet 150 mm diameter |
| 97 | Providing and fixing CP Brass Single lever telephonic wallmixer of quality & make as approved by Engineer in charge (a) 15 mm nominal dia |
| 98 | Carriage of sandandBajrithrough a lead of 50 kms by MTand300 m by headload |
| 99 | Carriage of stoneaggregate40 mmandabove through a lead of 50 kms by MTand300 m by headload |
| 100 | Carriage of bricks alead of220 kms by MT and300 mby head load |
