|
| 1 | Sub-Head : Dismantling and Demolishing |
| 2 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : |
| 3 | Of area 3 sq. metres and below |
| 4 | Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge. |
| 5 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. |
| 6 | Credit for: |
| 7 | Unserviciable GI Pipes/Fiitings |
| 8 | Unserviciable Brass Bib/stop cocks/pillar tap |
| 9 | Transportation of dismantled aluminium partitions consisting of Aluminium frame , nova pan board ,glass and other miscellaneous materials recovered and available at II floor GMTD Building with due care so the material not break and demaged during transportation uo to the 15 km distance incuding loading and unloading at the assigned locations of BSNL premises complete as per the direction of Engineer- in- charge |
| 10 | Sub-Head : Woodand P.V.C. Work |
| 11 | Providing and fixing oxidised M.S. casement stays (straight peg type) with necessary screws etc. complete. |
| 12 | 300 mm weighing not less than 200 gms. |
| 13 | Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete : |
| 14 | 200x10 mm |
| 15 | Providing and fixing aluminium handles ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : |
| 16 | 75 mm |
| 17 | Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance ±1mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame to be Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturer’s specification and direction of Engineer-in-charge |
| 18 | Extruded section profile size 48x40 mm |
| 19 | Providing and fixing to existing door frames. |
| 20 | 25 mm thick PVC flush door shutters made out of a one piece Multi chamber extruded PVC section of the size of 762 mm X 25 mm or less as per requirement with an average wall thickness of 1 mm (± 0.3 mm). PVC foam end cap of size 23x10 mm are provided on both vertical edges to ensure the overall thickness of 25 mm. M.S. tube having dimensions 19 mm x 19 mm and 1.0 mm (± 0.1 mm) is inserted along the hinge side of the door. Core of the door shutter should be filled with High Density Polyurethane foam. The Top & Bottom edges of the shutter are covered with an end-cap of the size 25 mm X 11 mm. Door shutter shall be reinforced with special polymeric reinforcements as per manufacturer’s specification and direction of Engineer- in-charge to take up necessary hardware and fixtures. Stickers indicating the locations of hardware will be pasted at appropriate places. |
| 21 | Providing and fixing M.S. handles for M.S. Windows etc. complete as per direction of Engineer-in-charge. |
| 22 | Sub-Head : Steel Work |
| 23 | Repairing and checking steel / wooden window for smooth functioning including necessary nails, welding and providing oil to hinges complete in all respect as per direction of Engineer-in-charge. |
| 24 | Sub-Head : Flooring |
| 25 | Removal of PVC/Woolen carpetfrom floor, stacking of serviceable materials and disposal of unserviceable materials etc. complete as per direction of Engineer-in-charge. |
| 26 | Sub-Head : Water Proofing |
| 27 | Grading roof for water proofing treatment with |
| 28 | Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) |
| 29 | Sub-Head : Finishing |
| 30 | Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface : |
| 31 | Water thinnable cement primer. |
| 32 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : |
| 33 | Two or more coats on new work. |
| 34 | Lettering with black Japan paint of approved brand and manufacture |
| 35 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 36 | Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. |
| 37 | Two coats. |
| 38 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 39 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : |
| 40 | One or more coats on old work. |
| 41 | French spirit polishing : |
| 42 | One or more coats on old work. |
| 43 | Sub-Head : Repairs to Buildings |
| 44 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground , all complete as per directions of Engineer-In-Charge. |
| 45 | With cement mortar 1:4 (1 cement : 4 fine sand). |
| 46 | Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: |
| 47 | Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm). |
| 48 | Providing & fixing White vitreous china water closet squatting pan (Indian type) along with \"S\" or \"P\" trap including dismantling of old WC seat and \"S\" or \"P\" trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge. |
| 49 | Orissa pattern W.C Pan of size 580x440 mm |
| 50 | Credit for damaged doors and windows |
| 51 | Sub-Head : Sanitary Installations |
| 52 | Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. |
| 53 | 10 litre capacity - White |
| 54 | Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete : |
| 55 | White solid plastic seat with lid |
| 56 | Cleaning of W.C. pan/ wash basin with harpic and bleaching powder etc. complete as per direction of Engineer-in-charge. |
| 57 | Sub-Head : Water Supply |
| 58 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. : Internal work - Exposed on wall |
| 59 | 20 mm nominal outer dia. Pipes. |
| 60 | 25 mm nominal outer dia .Pipes. |
| 61 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 62 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. |
| 63 | 15 mm nominal bore. |
| 64 | Providing and fixing PTMT grating of approved quality and colour. |
| 65 | Circular type. |
| 66 | 100 mm nominal dia. |
| 67 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) connector , brass elbow male & female socket having thermal stability for hot & cold water supply to the existing GI pipe line . This includes joining of pipes & fittings with one step CPVC solvent cement & testing of joints complete as per direction of Engineer in charge |
| 68 | (a) 20mm nominal dia |
| 69 | (b) 25 mm nominal dia |
| 70 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) gate valve having thermal stability for hot & cold water supply to the existing GI pipe line . This includes joining of pipes & fittings with one step CPVC solvent cement & testing of joints complete as per direction of Engineer in charge |
| 71 | Internal work: exposed on wall |
| 72 | (b)25mm nominal outer dia pipes |
| 73 | (a) 20 mm nominal dia |
| 74 | providing and fixing chlorinated polyvinyl chloride ( CPVC) union , having thermal stability for hot& cold water supply including jointing with hot & cold water supply including jointing with pipes & fitting by one step CPVC solvent cement and testing of joints complete as per the direction of Engineer in charge : Internal work : Exposed on wall |
| 75 | (a) 20mm nominal dia |
| 76 | (b) 25mm nominal dia |
