Sales : +91-777 804 8217
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 06-08-2022 | Time Extension Corrigendum | Date | 10-08-2022 |
| Sl. No. | Item Description |
| 1 | CIVIL WORKS:-Earthwork in excavation for foundation trenches of walls, retaining walls, footings of column, steps, septic tank etc. including refilling (return filling) the quantity as necessary after completion of work, breaking clods in return filling, dressing, watering and ramming etc. and removal of surplus earth with all lead and lifts as directed and specified in the following classification of soils including bailing out water where necessary as directed and specified.(A) Up to a depth of 2.00m below the existing ground level.(a) In ordinary soil |
| 2 | Providing soling in foundation and under floorwith stone/ best quality picked jhama brick, sand packed and laid to level and in panel after preparing the subgrade as directed including all labourand materials and if necessary dewatering, complete.(a).Brick on flat soling. |
| 3 | (b).Brick on edge soling |
| 4 | Providing form work of 12mm thick Plywood Board so as to give a rough finish including centering, shattering, strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in situ reinforced concrete and plain concrete work in:Columns, Pillars, Posts & Strut of square/ rectangular/ polygonal in plan or any shape like Tee/L etc. having plane vertical face |
| 5 | Sides and Soffits of Beams, beam haunchings, cantilever girders, bressumers, lintels and horizontal ties.(a) For depth not exceeding 1.0M. |
| 6 | Flat Surfaces such as soffits of suspended floors, roofs, landings, cantelever slabs, chajjas, balconies and the like.(a) Floors etc. upto 200mm in thickness. |
| 7 | Staircase with sloping or stepped soffits including risers and stringers but excluding Landing. |
| 8 | Plain cement concrete works with coarse aggregate of sizes 13mm to 32mm in foundation bed for footing steps, walls, brick works etc. as directed and specified including dewatering if necessary, and curing complete (shuttering where necessary shall be measured and paid separately).(b) In prop 1cement: 4 sand :8 coarse aggregate by volume |
| 9 | Supplying, fitting and fixing in position reinforcement bars conforming to relevant I.S. Code for R.C.C. work/ R.B. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete.(No extra measurement for lap, hook, chair, anchor etc. will be entertained in the measurement as they are included in the rate) (Upto 1st floor level) a) From Primary Producer: TATA/SAIL/Esser Steel/ Jindal steel/Shyam steel/RINL(ii)Super Ductile (SD) TMT reinforcement bars |
| 10 | 230mm thick brick wall in cement morter with 1st class brick including racking out joints and curing complete as directed in structure (II) In superstructure above plinth level up to 1st floor level.(b). In proportion 1:4.(1 cement:4 sand) |
| 11 | 1st class brick nogged wall in cement mortar including racking out joints and curing complete as directed in super structure above plinth up to 1st floor level (protruding M.S rod/Tor steel of column to be embeded in cement mortar and will be measured and paidseparately)(A) 112mm thick brick wall(a) In cement mortar in proportion 1:4. (1 cement:4 sand) |
| 12 | Providing and laying plain/reinforced cement croncrete works cement, coarse sand & 20mm down graded stone aggregate including dewatering if necessary, and curing complete but excluding cost of form work and reinforcement for reinforced cement concrete work (form work and reinforcement will be measured and paid separately) (I) Using Mixer Machine(B)In super structure from plinth level up to 1st floor level.P) Using admixture, plasticiser etc for air entraining, water reducing purposes including addition of agent for changing normal setting time of concrete as required.ii) Columns, pillars, posts, struts, suspended floor, roof, landing, shelf and support, balcony, lintel, sill band, beam, girder, bressumer, cantilever, staircase (except spiral staircase and landing ) including preparing the top surface and finishing of nosing.a) M15 grade concrete or Prop. 1:2:4 |
| 13 | Providing wood work in frame (chowkaths) of doors, windows, clerestory windows and other similar works wrought, framed and fixed in position in contact with C.C or brick masonry wall including supplying, fitting and fixing with M.S. hold fast (40mmx3mmx250mm) as per design embeded in cement concrete block in proportion 1:2:4 and with two coats of kiricide oiling to the timber faces in contact with C.C and masonry as directed and specified. (a)With sal wood |
| 14 | Providing and fixing flush door shutters solid core construction with frame of 1st class hard wood with cross band and face veneered ply wood face panels conforming to relevent I.S code including oxidised iron butt hinges (100mm x 75mm x 3.5mm) 6 nos with necessary wood screws. a) Decorative type face panel and block board core(i) 40 mm thick . |
| 15 | Earth/ sand filling in plinth in layers not more than 150mm thick including necessary carriage, watering, ramming etc. complete as directed and specified including payment of land compensation, forest royalty, sales tax and other duties and taxes as may be necessary.(a) With earth or silt or sand obtained by head load with lead upto 90m and lift upto 2m |
| 16 | 15 mm thick Cement plaster in single coat on single or half brickwall for interior plastering up to 1st floor level including arises, internal rounded angles, not exceeding 80mm girth and finished even and smooth including curing complete as directed.b) In cement mortar 1:4 |
| 17 | Providing, fitting and fixing anodised aluminium sliding windows and ventilators of standard sections of approved brand without horizontal glazing bars, joints mitred and welded (manufactured to relevant IS specifications) and providing and fixing handles, angle cleat, rubber gasket, roller, bolting device, locking arrangements, screws etc as required complete as specified and directed for all levels.(a)2 Track sliding window(i)6mm clear glass |
| 18 | Supplying, fitting and fixinganodised aluminium decorated grill with anodised aluminium rectangular frame of \"F\" and \"H\" section fitted with walls, columns orstiffeners by special type of screws as per specification by the Department for all levels.(Aluminium Alloy procured from primary aluminium producer (On submission of certificate of alloy purchaging from primary producer) |
| 19 | Pre construction anti - termite treatment by applying in the entire levelled area after plinth filling and before laying floor by applying the emulsion @ 5 (five) litres per square meter of the surface to be spread with light rodding so as to ensure proper absorption by the filled up earth (supplying of necessary tools and accessories by the contractor) as per the direction of the Department complete.a) with aqueous emulsion having concentration 1:19 with chloropirophose solution (tricel or euivalent) and water, i.e. 1% solution. |
| 20 | Grading roof for water proofing treatment with (a) Cement concrete 1:2:4 (cement: 2 coarse sand: 4 graded stone agg. 20 mm nominal size) |
| 21 | Providing and laying six course water proof treatment with bitumen felt over roof consisting of first, third and fifth courses of blown or residual bitumen applied hot @ 1.45kg, 1.20kg and 1.45kg per sq.m of areas respectively, second and fourth courses of roofing with felt type 3 grade - I (hessain base self finished bitumen felt) and sixth and final course with stone grit 6mm and down per sq.m including preparation of surface, excluding grading complete. |
| 22 | 40 mm thick cement concrete floor consisting of 25 mm under layer of cement concrete in prop. 1:3:6 (1cement : 3 coarse sand : 6 coarse aggregate of 12.5 mm and down) and 15 mm thick wearing layer in cement concrete in prop. 1:1:2 (1cement :1 coarse sand : 2 coarse aggregate of size 10mm down) finished with a floating coat of neat cement finish using cement slurry for bond @ 2.75 kg. per square metre of floor area , wearing layer is to be laid in panels including curing etc. complete as directed. |
| 23 | Supplying, fitting and fixing 38mm thick (finished size) wooden flooring with sal wood plank butt jointed, fitted on sal wood joist of size 100mm x 125mm spaced not more than 900mm apart fitted with 16mm dia bolt and nuts with iron clamp of 50mm x 5mm size inserting in the cement concrete floor base (floor base to be measured and paid separately) including providing 25mm thick damp proof course with water proofing compound as recommended by the manufacturer over C.C floor base including providing kiricide oiling two coats to the timber joists, underside of the flooring planks, two coats of anti-corrosive paint to the iron works, including providing ventilation gaps for the timber works of specified size (75mm x 75mm) covered with welded mesh fabrics at the face of the gap including dressing, levelling, finishing complete as specified and directed by the department at all levels (measurement shall be taken at the finished area of the works). |
| 24 | Providing VITRIFIED floor tiles of approved quality of specified size, shape and thickness not less than 18mm on floors, skirtings, risers and treads of steps over 15 mm thick base ofcement mortar in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf) / white cement slurry mixed with approved pigment to match shade of tiles, mixed with approved pigment to match the shade of the tiles, complete at all levels as specified and directed.(Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department)a) Normal range Somany/ Orient/Nitco /Varmora/VITA/ Marbito/ Makeii) Of size 600mmx600mm and above |
| 25 | Providing polished granite tiles of approved quality, size and shape and thickness not less than 8mm, on walls over 15mm thick, cement mortar bed in prop. 1:3 (1 cement : 3 coarse sand) including cutting where necessary, finished with flush pointing on wall with ordinary cement slurry mixed with approved pigment to match shade of tiles, complete at all levels as specified and directed. |
| 26 | Providing polished ceramic wall tiles of approved quality, size, shape and thickness not less than 8mm on walls and skirtings over cement mortar bed 10 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey / Sika / Pedelite / Rouf) /white cement slurry mixed with approved pigment to match shade of tiles complete at all levels as specified and directed. (Cement plastering to be measured and paid separately). (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department). (Walls means both interior and exterior walls).ii) Of size 200mmx300mm and above |
| 27 | Providing Antiskid Tiles of approved quality size, shape not less than 8mm on floor, skirting over a cement mortar bed 15mm thick of 1:3 (1 cement: 3 coarse sand) approved make fix with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf)/ white cement complete at all level as specified and directed.(A) CERAMIC i)Normal range (Sizes 300 mm x 300mm and above) (a)Orient made:Galaxy Brown, Galaxy creama, Galaxy Pink, Galaxy Green, Pulsar Beige, Pulsar Blue, Pulsar Dove, Pulsar Pink, Burj Brown, Burj Green, Burj Slate |
| 28 | a) Applying one coat of cement primer of approved brand and manufacture on new wall surface after throughly brooming the surfaces free from mortar droppings and other foreign matter and including preparing the surface even and sand papered smooth. |
| 29 | b) Finishing wall with water proofing cement paint of approvedbrand and manufacture and of required shade on new wall surface (two coats) to give an even shade after throughly brooming the surfaces to remove all dirt and remains of loose powdered materials. |
| 30 | Applying priming coat over newwood and wood based surfaces over 100mm in girth/width after and including preparing the surface by throughlycleaningoil, grease, dirt snd other foreign matter , sand papering and knotting. (b). With ready mixed paint , wood primer (white). |
| 31 | Painting two coats (excluding priming coat) on new wood and wood based surface with enamel paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) to give an even shade including cleaning the surfaces of all dirt, dust and other foreign matter sand papering and stopping.(i).Surfaces over 100mm in width or girth.b). High gloss(Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac). |
| 32 | Supplying, fitting, fixing brass fittings of approved make, resonably smooth, free from sharp edges and corners, flaws and other defects and with counter sunk holes for screws including necessary c.p. brass screws etc. complete.( bright natural matt & satin finished ).a) Sliding door boltsi) 300mm x 16mm |
| 33 | b) Tower boltsi) 300mm x 12mm |
| 34 | c)Door handlesiii) 150mm |
| 35 | Providing Pre Painted Galvanized IronSheetRoofing (PPGI) at all levels including fitting and fixing with self drilling, self tapping screws complete. (Roof trusses, purlins etc. to be measured and paid separately.) TATA Blue scope/ Dyna roof / Durakolor /Wonder Roof or equivalent as directed by the Departement(ii) 0.45 mm thick |
| 36 | Providing Pre Painted Galvanized Iron Sheet (PPGI) accessories (Ridges / Valley / Gutter /Flashing)at all levels including fitting and fixing self drilling, self tapping screws complete complete.TATA Blue scope/ Dyna roof / Durakolor /Wonder Roof or equivalent as directed by the Departement(ii) 0.45 mm thick |
| 37 | Providing, fitting, hoisting and fixing of roof trusses fabricated out ofcombination of anytwo or all of the following sections (i) Square section (ii) Rectangular Hollow section of specification RSH/SHS and (iii) M.S. circular hlollow section of Grade 210 including purlins, bottom runners and providing M.S. cleat, M.S. angle base plank, bolts and nuts with red oxide primer including fitting bottom runner and cleat etc. for fixing ceiling joist as per design complete as directed as per specifications.a) Using TATA make RHS/SHS of Grade 310 conforming to relevant I.S. code 4923 : 1997 |
| 38 | Providing, fitting, hoisting and fixing of roof trusses fabricated out ofcombination of anytwo or all of the following sections (i) Square section (ii) Rectangular Hollow section of specification RSH/SHS and (iii) M.S. circular hlollow section of Grade 210 including purlins, bottom runners and providing M.S. cleat, M.S. angle base plank, bolts and nuts with red oxide primer including fitting bottom runner and cleat etc. for fixing ceiling joist as per design complete as directed as per specifications.a) Using TATA make RHS/SHS of Grade 310 conforming to relevant I.S. code 4923 : 1997Stage light/curtain frame,ladder,above cealing light frame etc. and miscelenious. |
| 39 | Providing and fixing M.S. Tube hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer complete as specified and directed by department |
| 40 | Providing plinth protection with bricks laid on edge and grouted with cement mortar 1:4 and finishing with cement pointing in prop. 1:1 complete. |
| 41 | Supplying, fitting and fixing SoundSoak NSS Cord (FSS Cord) wrapped acoustical wall panel system of Anutone Acoustics Ltd. Including all fixtures and fittings.d) Armstrong Wood works acoustical wall panelling |
| 42 | Supplying, fitting and fixing SoundSoak FSS Cordura wrapped acoustical wall panel system of Anutone Acoustics Ltd. Including all fixtures and fittings.b) 25 MM |
| 43 | Supplying, fitting and fixing SoundSmooth MB Primer (NSS Primer) with glass wool of Anutone Acoustics Ltd. Including all fixtures and fittings.b) 25 MM |
| 44 | Providing & fixing Armstrong Mineral fibre Acoustical suspended ceiling system with optra FG ( board/tegular) edge tiles with armstrong XL 24mm exposed grid (600x600x15)mm |
| 45 | Providing and fixing, in position suspended false ceiling using E-Grid (exposed ceiling suspension 2430 system) of grid size 600mm x 600mm/1200mmx600mm with main runner 38 x 24mm, cross tee 29mm x 24mm & wall angle 24mm x 24mm . Using 4mm/6mm thick High Pressure Steam Cured Non Asbestos Fibre CementBoard as per IS 14862, to be placed in a grid of G.I. system duly suspended with 4mm/6mm dia G.I/M.S bar hanger fixed with steel dash fasteners or iron purlin from the roof with adjustment clip providing positions for light fixtures, air conditioning diffuser and ducts, sprinklers, smoke detectors etc. The main runners to be secured to structural soffit by hanger @ 1220mm maximum c/c. The last hanger at the end of each main runner should not be placed at more than 450mm from the adjacent wall. Flush fitting 1220mm cross tee to be interlocked between main runners @ 610mm c/c, so as to form 600mm x 600mm/1200mmx600mm grid, all complete as per the drawing & directions of engineer-in-charge. Finally, if specified, boards are to be painted with 2 coats of acrylic emulsion paint of approved shade/make over a coat of cement primer before installing it on the grid.(A) Standard Ceilings of Everest make or equivalent as directed by the departement |
| 46 | Providing , fabrication and fixing of structural glazing made out of Anodised aluminium mother frame 6 nos 1.2m each @ 1.819 Kg/m and subframe of 16 nos 0.60 m each @0.31 Kg/m of Jindal or equivalent and 5 mm reflective glass of approved shade. The glass to be pasted using structural silicon (DC 995) and weatherseal silicon to be used (DC 789), the structure complete with all accessories as and where necessary. |
| 47 | WATER SUPPLY & SANITARY WORKS:Providing fitting and fixing vitreous water closet squatting pan (Indian type W.C Orissa pattern) with all fittings and fixtures complete including cutting and making good to the walls and floors wherever required. (Flushing Cistern to be paid Separately)Indian type Orissa pattern of size 500mma)Whitei) Hindware make |
| 48 | Providing fitting and fixing vitreous china pedestal type water closet (European type W.C pan 400mm high )with seat and lead ,CP brass hinges and rubber buffers, CI/MS brackets ,40 mm dia flush band with fittings including painting of fittings and brackets, required. (Flushing Cistern to be paid Separately) A) Parryware makea) White(ii) Combination Closet S Trap (Cat No. C0205) (inclusive of Seat cover) |
| 49 | Supplying Fitting and fixing PVC Flushing cistern with all internal fittings with CI brackets including fitting and fixing standard size CP flush pipe , union clamps etc. compete as directed and specified (pipes will bemeasuredseparately)l) Parryware makea) Economy single Flush (Cat. No. C8090/C8055 |
| 50 | Providing fitting and fixing vitreous china flat back type lipped front urinal basin with standard flush pipe and CP brass spreader and brushs union,etc. complete including painting of fittings and brackets, cutting and making good the walls and floors wherever required (A) Parryware Make(a) White(iv) Flat Back (Cat. No. C0501/72) |
| 51 | Providing fitting and fixing vitreous china squatting plate urinal with automatic flushing cistern with standard flush pipe and CP brass spreader and brass unions, etc. complete including painting of fittings and brackets,cutting and making good the walls & floors wherever required.(A) Parryware Make(i) White (Cat.No. C0503) |
| 52 | Supplying fitting and fixing vitreous china division plate including fittingand fixing complete as directed and speciied.(ii) Hindware make a) whitei) Division plate 680 x 300 (cat. No.61001) |
| 53 | Wash BasinProviding vitreous china wash basin with CI/MS brackets C.P brass chain with plug ,PVC waste pipe including painting of fittings and brackets cutting and making good the walls wherever required. (pillar cock , Stop Cocks , Waste coupling are to be paid separately)Counter top basin(B) Hindware make(a)White(ii) Optra 570x440 (Cat. No.91008) |
| 54 | MIRRORProviding fitting and fixing Decorative mirror complete as directed and Specified(A) Parryware Make(a)Size 800mm x 600mm |
| 55 | Towel ringProviding, fitting and fixing CP Towel Rail complete as directed and specified(b) Sona make (1) Towel rail Diplomat 300mm long (Cat.No.TR-0605) |
| 56 | soap dishProviding, fitting and fixing Chrome plated towel ring complete as directed and specified(b) Sona make (ii) Towel ring round Aristo (Cat. No. TR-0652) |
| 57 | soap dishProviding, fitting and fixing recessed soap tray / soap dish complete as directed and specified. (a) Parryware Make(ii)Wall Soap tray (Cat. No.C9951) |
| 58 | Providing fitting and fixing chrome plated rope hook complete as directed and specified a) Jaguar makei) continental( Cat. No. CAN -1191N) |
| 59 | WASTE COUPLINGProviding, fitting andfixing Chrome plated waste coupling complete as directed and specifieda) Jaguar makei) 32mm (HT/ FT) Cat No. ALD-705/709 |
| 60 | BOTTLE TRAPProviding ,fitting and fixing Chrome plated bottle trap complete asdirected and specifieda) Jaguar makei) Bottle trap( with internalpartition ) 32mm size with250mm long wall connection pipe ( Cat. No.ALD -769) |
| 61 | Bip CockSupplying fitting and fixing C.P. bib cock 15mm dia ofapproved brand as directed and specified. (G.I. & C.P pipes will be measured separately)(iv)Agmeco Brand(i)Bib Cock with out Flange CAT No.CC 00204/CAT No. CN 00204 |
| 62 | Stop cockSuppllying fitting and fiixing stop cock of approved brand of size as mentioned below and directed and specified (G.I. & C.P. Pipes will be measured and paid separately)1)Brass stop cock (heavy) ofSant make (v) 40mm dia |
| 63 | Supplying and fitting fixing C.P. pillar cock of 15mm dia of approved brand as Specified and directed(1) SONA make(b) Heavy type |
| 64 | Supplying fitting and fixing approved Upvcpipes of different sizes ,with all necessary \"R\"brand or similar approved Upvc fittings such as bend, tee, elbow, reducer,nipple, plug,long screw fitting ,clamps etc.complete at all levels including below G.L. as directed and specified.SUPREME /PRINCESFMC brand or other equivalent approved brand ( High pressuure pipe Sch-40)A) Exposed or in trenches20mm dia |
| 65 | 15 mm dia |
| 66 | Supplying, Fitting, Fixing and installing of automatic electrical water purifier for Mineral guard and enhanced protection fro heavy metals of 7Ltr Electronic Membrane Life Enhancer(EUREKA/ KENT/ HUL/LIVPURE) or equivalent make as approved by the deptt. (i) 7-Litre RO + UV + Mineralizer Water Purifier |
| 67 | B)External Water SupplySupplying and fitting ball valve as specified and directedb ) 20 mm dia |
| 68 | Supplying, fitting and fixing pipe plain/ beveled ended for casing, conforming to relevent IS Code of practice including supplying and fitting fixing of tube well accessories, lowering of assembly pipes concentrically in the bore hole followed by supplying and packing of pea gravel free from dirt, dust and other foreign materils in the annular space between the bore holes and assembly pipes complete as directed by the deptt.(i) GI Pipea) TATA/SAIL (Medium) socket should be welded to the pipes.vi) 150mm dia |
| 69 | CPVC pipe with CPVC fittings (using SUPREME/PRINCE/SFMC/FUSION brand pipe)(ix) 90mm dia |
| 70 | (vi) 50mm dia |
| 71 | Earthwork in excavation for foundation trenches of walls, retaining walls, footings of column, steps, septic tank etc. including refilling (return filling) the quantity as necessary after completion of work, breaking clods in return filling, dressing, watering and ramming etc. and removal of surplus earth with all lead and lifts as directed and specified in the following classification of soils including bailing out water where necessary as directed and specified.(A) Up to a depth of 2.00m below the existing ground level.(a) In ordinary soil |
| 72 | Providing soling in foundation and under floorwith stone/ best quality picked jhama brick, sand packed and laid to level and in panel after preparing the subgrade as directed including all labourand materials and if necessary dewatering, complete.(a).Brick on flat soling. |
| 73 | Providing form work of ordinary timber planking so as to give a rough finish including centering, shuttering, strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in-situ reinforced concrete and plain concrete work in:Foundation, footings, bases of columns, pile cap, raft and mass concrete works etc.(b) Using 25mm thick plank |
| 74 | Sides of tie beams, grade beams etc. at or below ground level.(b) Using 25mm thick plank |
| 75 | Plain cement concrete works with coarse aggregate of sizes 13mm to 32mm in foundation bed for footing steps, walls, brick works etc. as directed and specified including dewatering if necessary, and curing complete (shuttering where necessary shall be measured and paid separately).(a) In prop 1cement: 3 sand :6 coarse aggregate by volume |
| 76 | Supplying, fitting and fixing in position reinforcement bars conforming to relevant I.S. Code for R.C.C. work/ R.B. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete.(No extra measurement for lap, hook, chair, anchor etc. will be entertained in the measurement as they are included in the rate) (Upto 1st floor level) a) From Primary Producer: TATA/SAIL/Esser Steel/ Jindal steel/Shyam steel/RINL(i) TMT Corrosion resistant steel (CRS) reiforcement bar |
| 77 | Providing and laying plain/reinforced cement croncrete works cement, coarse sand & 20mm down graded stone aggregate including dewatering if necessary, and curing complete but excluding cost of form work and reinforcement for reinforced cement concrete work (form work and reinforcement will be measured and paid separately) (I) Using Mixer Machine(A) In substructure up to plinth levelFoundation, footing, columns with base tie and plinth beam, pile cap, base slab, retaining walls, walls of septic tank, inspection pit and the like and other works not less than 100mm thick up to plinth level.P) Using admixture, plasticiser etc for air entraining, water reducing purposes including addition of agent for changing normal setting time of concrete as required.b) M20 grade concrete or Prop. 1:1.5:3 |
| 78 | 10 mm thick Cement plaster in single coat on fair side of brick/concrete walls for interior plastering up to 1st floor level including arises orrounded angles not exceeding 80mm girth and finished even and smooth including curing complete as directed.b) In cement mortar 1:4 |
| 79 | 15 mm thick Cement plaster in single coat on single or half brickwall for interior plastering up to 1st floor level including arises, internal rounded angles, not exceeding 80mm girth and finished even and smooth including curing complete as directed.A) On rough sideb) In cement mortar 1:4 |
| 80 | a) Applying one coat of cement primer of approved brand and manufacture on new wall surface after throughly brooming the surfaces free from mortar droppings and other foreign matter and including preparing the surface even and sand papered smooth. |
| 81 | b) Finishing wall with water proofing cement paint of approvedbrand and manufacture and of required shade on new wall surface (two coats) to give an even shade after throughly brooming the surfaces to remove all dirt and remains of loose powdered materials. |
| 82 | Earthwork in excavation for foundation trenches of walls, retaining walls, footings of column, steps, septic tank etc. including refilling (return filling) the quantity as necessary after completion of work, breaking clods in return filling, dressing, watering and ramming etc. and removal of surplus earth with all lead and lifts as directed and specified in the following classification of soils including bailing out water where necessary as directed and specified.(A) Up to a depth of 2.00m below the existing ground level.(a) In ordinary soil |
| 83 | Providing soling in foundation and under floorwith stone/ best quality picked jhama brick, sand packed and laid to level and in panel after preparing the subgrade as directed including all labourand materials and if necessary dewatering, complete.(a).Brick on flat soling. |
| 84 | Providing form work of ordinary timber planking so as to give a rough finish including centering, shuttering, strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in-situ reinforced concrete and plain concrete work in:Foundation, footings, bases of columns, pile cap, raft and mass concrete works etc.(b) Using 25mm thick plank |
| 85 | Sides of tie beams, grade beams etc. at or below ground level.(b) Using 25mm thick plank |
| 86 | Vertical surface such as walls (any thickness), parapet walls, partitions, walls of septic tank, inspection pit and the like including attached pilasters, butresses, plinth and string courses and the like.(ii) Using 25mm thick plank |
| 87 | Flat Surfaces such as soffits of suspended floors, roofs, landings, cantelever slabs, chajjas, balconies and the like.(ii) Using 25mm thick plank |
| 88 | Supplying, fitting and fixing in position reinforcement bars conforming to relevant I.S. Code for R.C.C. work/ R.B. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete.(No extra measurement for lap, hook, chair, anchor etc. will be entertained in the measurement as they are included in the rate) (Upto 1st floor level) a) From Primary Producer: TATA/SAIL/Esser Steel/ Jindal steel/Shyam steel/RINL(i) TMT Corrosion resistant steel (CRS) reiforcement bar N.B. All length are including Lap length, Developmental length, etc. |
| 89 | Brick work in cement morter with 1st class brick including racking out jointsand curing complete as directed.(I) In Sub-structure upto plinth level including dewatering if necessary(a) In proportion 1:3. |
| 90 | Providing and laying plain/reinforced cement croncrete works cement, coarse sand & 20mm down graded stone aggregate including dewatering if necessary, and curing complete but excluding cost of form work and reinforcement for reinforced cement concrete work (form work and reinforcement will be measured and paid separately)(I) Using Mixer Machine(A) In substructure up to plinth levelFoundation, footing, columns with base tie and plinth beam, pile cap, base slab, retaining walls, walls of septic tank, inspection pit and the like and other works not less than 100mm thick up to plinth level.P) Using admixture, plasticiser etc for air entraining, water reducing purposes including addition of agent for changing normal setting time of concrete as required.a) M15 grade concrete or Prop. 1:2:4 |
| 91 | Earth/ sand filling in plinth in layers not more than 150mm thick including necessary carriage, watering, ramming etc. complete as directed and specified including payment of land compensation, forest royalty, sales tax and other duties and taxes as may be necessary.(a) With earth or silt or sand obtained by head load with lead upto 90m and lift upto 2m |
| 92 | 10 mm thick Cement plaster in single coat on fair side of brick/concrete walls for interior plastering up to 1st floor level including arises orrounded angles not exceeding 80mm girth and finished even and smooth including curing complete as directed.b) In cement mortar 1:4 |
| 93 | Providing precast R.C.C slab over drain ,septic tank etc. in prop. 1:2:4 reinforced with 10mm M.S. bar @ 150mm centre both ways tying with 20 gauge black annealed wire withnecessary shuttering , curing etc. completeincluding fixing in position as directed.a) 100mm thick slab |
| 94 | Landscaping Works:Supplying and laying of selectedgrass turves [ size 60 cm x 30 cm] after preparing the land by removing of all unwanted debrises ( rubbles, pebbles, plant roots etc.), mixing of organic manure,levelling the surface and initial maintenance by proper and periodic rolling, mowing and irrigation etc.( as specified) for a period of six months from the date of laying of grass including the application of recommended dose of fertilizers(N:P:K) mixture as specified and directed by the department.(a) By Bahpotia grass and Doob grass (Cynodon dactylon) : |
| 95 | Supplying and planting of palms with required size of pot including filling the pot to the top surface with appropriate soil media made of garden soil, river sand, cow-dung, leaf mould, fertilizer, pesticides as per specification and necessary maintenance for a period of 4 months from the date of planting complete as specified and directed . (Mixing of different ingredients of soil media to be made in presence of Deptt. official / Specialist concerned)(B)With Erica palm (Butterfly palm)/ Kentia palm (II) Using earthen pot of 60 cm dia. |
| 96 | Supplying and planting of suitable plant materials for preparation protective / external hedge (50 cm wide)including the preparation of the ground by mixing organic manure and fertilizers as per specification and necessary maintenance for a period of one year from the date of planting complete as specified and directed . (B) ADOPTING CROSS WISE DOUBLE ROW PLANTING METHOD (i) WithDuranta |
| 97 | Supplying and planting of suitable plant materials for edge making / Internal hedge(20 cm wide) including the preparation of the ground by mixing organic manure and fertilizers as per specification and necessary maintenance for a period of one year from the date of planting complete as specified and directed . (B) ADOPTING CROSS WISE DOUBLE ROW PLANTING METHOD(iii) With Brindavan / Latifolius |
| 98 | Supplying and planting of ornamental trees (1\"-0\" height sapling) including pit making ( 60 cm x 60 cm x 60 cm ), filling the pit with appropriate soil media, manure and fertilizers as per specification and necessary maintenance for a period of one year from the date of planting complete as specified and directed . SHADE TREE(G) Christmas tree / Kuki |
| 99 | Supplying and planting of ornamental shrub ( below 1\"-0\" height ) including pit making ( 60 cm x 60 cm x 60 cm ), filling the pit with appropriate soil media, manure and fertilizers as per specification and necessary maintenance for a period of one year from the date of planting complete as specified and directed . Radhachura |
| 100 | Krishnachura |
| 101 | Ixora |
| 102 | Acalypha |
| 103 | Bougainvillea Pink |
| 104 | Togor |
| 105 | Mussaenda |
| 106 | Korobi |
| 107 | Thuja |
| 108 | Poinsettia / Forget me not |
| 109 | External Electrical Works:Supplying and installation of metal enclosed wall/floor mounted front operated cubical type switch gear panel suitable for indoor installation conforming to IS: 8623(Part I & II). The panel should be made of sheet steel and thickness not less than 2mm and structural steel having leght section. The panel shall be completely dust tight and vermin proof and shall be painted with with anti corrosive and anti condensation type two coats of primer and two coats of paint. All wiring shall be PVC insulated and PVC shethed of 1100 volt grade of required size. The panel should have provision of entry of cable at the boottom and also provision for out going feeders from the bottom of the panel. The bas bar shall be of high quality copper of uniform cross secton. The panel shall consist of the following items.(viz voltmeter, ammeter, CT, indicating lamps, selector switch etc.) connected as per per drawing and shall beflush mounted on the front of the panel.Incomers: a) 160A, 4P, MCCB, 25KA-2 Nos., b) 160A, 4P, on-load Changeover switch-1No., c) Digital Ammeter-2Nos., d) Digital Voltmeter-2Nos., e) CT 160/5-1 No., f) Switch Fuse Unit-6 Nos. g) Selector Switch-4Nos., h) Indicating lamp - 2 sets.Bus bars: 320 A TPN electrolytic Copper Bus Bar of uniform cross-section (40mm x 5mm) - 1 setOutgoing: 40A 4P MCB - 4 Nos.,40A DP MCB - 9 Nos., 32A DP MCB - 3 Nos., 40A, 4P, MCCB, 25 KA - 1 Nos. |
| 110 | Supply and laying of following size PVC/XLPE insulated nd PVC shethed 11 KV gd aluminium conductor LT armoured U.G cable laid in ground/partialy in air (10.0% of cable length) including excavation of cable trench upto depth of 75cm, refilling, protective brick covering, sand cushioning etc. complete handling of surplus spoil debries et. to proper place as specified and directed by the deptt.50.00 sq mm 3½ Core U.G. Cable |
| 111 | 300.00 sq mm 3½ Core U.G. Cable |
| 112 | Supply and laying of following size PVC/XLPE insulated nd PVC shethed 11 KV gd aluminium conductor LT armoured U.G cable laid in ground/partialy in air (10.0% of cable length) including excavation of cable trench upto depth of 75cm, refilling, protective brick covering, sand cushioning etc. complete handling of surplus spoil debries et. to proper place as specified and directed by the deptt.4.00 sq mm core U.G. Cable |
| 113 | 6.00 sq mm core U.G. Cable |
| 114 | U.G. POWER CABLE LAID THROUGH GI PIPESupply and laying of following size PVC/XLPE insulated nd PVC shethed 11 KV gd aluminium conductor LT armoured U.G cable laid in ground/partialy in air (10.0% of cable length) including excavation of cable trench upto depth of 75cm, refilling, protective brick covering, sand cushioning etc. complete handling of surplus spoil debries et. to proper place as specified and directed by the deptt.6.00 sq mm 3 Core U.G. Cable in 32mm dia medium quality G.I. Pipe |
| 115 | 300.00 sq mm 3½Core U.G. Cable in 100mm dia medium quality G.I. Pipe |
| 116 | Supply and laying of following size PVC/XLPE insulated nd PVC shethed 11 KV gd aluminium conductor LT armoured U.G cable laid in ground/partialy in air (10.0% of cable length) including excavation of cable trench upto depth of 75cm, refilling, protective brick covering, sand cushioning etc. complete handling of surplus spoil debries et. to proper place as specified and directed by the deptt.25.00 sq mm 3½ core U.G. cable in 40mm dia medium quality G.I. Pipe |
| 117 | 150.00 sq mm 3½ core U.G. cable in 80mm dia medium quality G.I. Pipe |
| 118 | EXTERNAL STREET LIGHTING Supplying with fitting and fixing of the following integral type street light luminaries complete and consisting of single piece integral epoxy gray powder coated dia cast aluminum housing gasket, pot optic reflector , cast aluminum frame from heat resistance toughened clear glass cover and accessories such as Condensor , lamp Holder, Ballast, lamp etc. in the existing pole including making necessary connection as approved by the deptt.) with 2 x 2.50 sq.mm F.R. multistrand and P.V.C. insulated single core copper cable as specified and directed by the deptt.Philips make Cat No.So.SRX051 1xSON250W For Lamp 1xSON/SONT250W/Wipro make) Cat ref: WST 50250, For Lamp 1 x250W HPSV (Crompton Greaves make) SSSGUN15H/GF or lamp 1 x 250W HPSV (T) |
| 119 | Supply, Fitting and fixing Shock Treatment Chart |
| 120 | Supply, istllation antistatic rubber mat suitable for 1.1 kv Voltge grade |
| 121 | MAIN LT PANEL-UNIVERSITYSupplying and installation of metal enclosed wall/floor mounted front operated cubical type switch gear panel suitable for indoor installation conforming to IS: 8623(Part I & II). The panel should be made of sheet steel and thickness not less than 2mm and structural steel having leght section. The panel shall be completely dust tight and vermin proof and shall be painted with with anti corrosive and anti condensation type two coats of primer and two coats of paint. All wiring shall be PVC insulated and PVC shethed of 1100 volt grade of required size. The panel should have provision of entry of cable at the boottom and also provision for out going feeders from the bottom of the panel. The bas bar shall be of high quality copper of uniform cross secton. The panel shall consist of the following items.(viz voltmeter, ammeter, CT, indicating lamps, selector switch etc.) connected as per per drawing and shall beflush mounted on the front of the panel.CT 160/5 - 1 Nos.Incomer:160 A, 4P, MCCB, 25 KA- 2 Nos., 160 A, 4P, on-load Changeover switch - 1 Nos.,Digital Ammeter - 2 Nos., Digital Voltmeter - 2 Nos., CT 160/5 - 1 Nos.,Switch Fuse Unit- 6 Nos.,Selector Switch - 4 Nos., Indicating lamp - 2 sets. Bus bars: 320 A TPN electrolytic Copper Bus Bar of uniform cross-section (40mm x 5mm) - 1 setOutgoing40A 4P MCB - 4 Nos.,40A DP MCB - 9 Nos., 32A DP MCB - 3 Nos., 40A, 4P MCCB, 25KA-1 Nos. |
| 122 | Wiring for lighting/fan/call bell point with 2x1.5 sqm mm PVC insulated single core unsheated industrial cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex/RR Kabel/Nicco/Anchor or equivalent make as approved by the deptt. In surface/recessed conduit wiring system with 20mm dia 2mm thick/ heavy rigid PVC IS:9537 Part-III conduit (Berlia/ AKG/ Precision/ Presto Plast/ Polycab/ MW or equivalent make as approved by the deptt.) Including 6 Amp flush type switch / bell push(Finolex/RR Kabel/Nicco/Anchor or equivalent make as approved by the deptt. GI/MS switch board (ISI marked) with phenolic leminated sheet cover, ceiling rose (Anchor/Penta/ Gold medal/Kolor kany.Kom/Havells or equivalent make as approved by the depttz0 etc. completed.Short point up to 3.00 metre. lenght |
| 123 | Mediumpoint up to 6.00 metre. Length |
| 124 | Long point up to 10.00 metre. Length |
| 125 | Wiringto5/6 pin 16 Amps power plug point with 4 sqm mm PVC insulated single core unsheated industrial cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex/RR Kabel/Nicco/Anchor or equivalent make as approved by the deptt. In surface/recessed conduit wiring system including and fixing 5/6 pin 16 Amps flush type socket outlets and 16 Amps flush type switch ( Anchor/Penta/ Gold medal/Kolor kany.Kom/Havells or equivalent make as approved by the deptt.) Including 6 Amp flush type switch / bell push(Finolex/RR Kabel/Nicco/Anchor or equivalent make as approved by the deptt. GI/MS switch board (ISI marked) with phenolic leminated sheet cover earth continuity with 2.5 Sqm mm cable to the 3rd pin of the socket as required complete with 20 mm dia 2mm thick/heavy rigid ISI marked ISI: 9537 PART-III rigid PVC conduit(Berlia/ AKG/ Precision/ Presto Plast/ Polycab/ MW or equivalent make as approved by the depttz0 etc. completed. Extra Long point up to 15.00 metre. Length |
| 126 | Extra Long point up to 20.00 metre. Length |
| 127 | Extra Long point up to 25.00 metre. Length |
| 128 | Wiringto5 a pin 6 Amps plug point with 1.5 sqm mm PVC insulated single core unsheated industrial cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex/RR Kabel/Nicco/Anchor or equivalent make as approved by the deptt. In surface/recessed conduit wiring system including and fixing 5 pin 6 Amps flush type socket outlets and 16 Amps flush type switch ( Anchor/Penta/ Gold medal/Kolor kany.Kom/Havells or equivalent make as approved by the deptt.) Including 6 Amp flush type switch / bell push(Finolex/RR Kabel/Nicco/Anchor or equivalent make as approved by the deptt.earthingthe 3rd pin of the socket as required on the switch board in surface/recessed PVC conduit wiring system. When fitted on same board of light and fan. |
| 129 | Wiringfor drawing sub main line with PVC insulated single core unsheated industrial cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex/RR Kabel/Nicco/Anchor or equivalent make as approved by the deptt. PVC Conduit(Berlia/ AKG/ Precision/ Presto Plast/ Polycab/ MW or equivalent make as approved by the deptt.) Includingearth continuity in surface/recessed 20mm dia 2mm thick/heavy ISI narkedISI: 9537 PART-III rigid PVC conduitwiring systemWith 2 x 2.5 sq. mm + earth continuity with 1 x 1.5 sqm in 20mm dia 2mm thick/heavy rigid PVC IS:9537 Part-III conduit. |
| 130 | With 2 x 6 sq. mm + earth continuity with 1 x 4 sqm in 25mm dia 2mm thick/heavy rigid PVC IS:9537 Part-III conduit. |
| 131 | With 2 x 10 sq. mm + earth continuity with 1 x 6 sqm in 25mm dia 2mm thick/heavy rigid PVC IS:9537 Part-III conduit. |
| 132 | Wiringfor drawing sub main line with PVC insulated single core unsheated industrial cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex/RR Kabel/Nicco/Anchor or equivalent make as approved by the deptt. in surface/recessed PVC 20mm dia 2mm thick/heavy ISI markedIS:9537PART-III rigid PVC conduit (Berlia/ AKG/ Precision/ Presto Plast/ Polycab/ MW or equivalent make as approved by the deptt.)wiring systemWith 4 x 10 sq. mm + earth continuity with 2 x 6 sqm cable in 40mm dia2mm thick/heavy rigid PVCIS:9537 Part-III conduit. |
| 133 | Installation, testing and commisioning of precabled fluroscent of all types , complete with all accessories and tubes etc. including supplying ball and socket arrangement, suspension down rod of 19 mm dia H.G. conduit up to 30 cm length including painting and connection as approved by the deptt.) with 1.5 sqm mm copper cables as required, [NOTE: FOR HANGING BOX TYPE FLUROSCENT TUBE LIGHT] |
| 134 | Supplying and fixing of fan box (AKG or equivalent as approved by the Deptt.) WITH INBUILD rod AS REQUIED |
| 135 | WIRING FOR LIGHT/FAN POINTwiring for light point /fan point, call bell point with 1.5 sq. mm insulated (ISI marked) HFFR Copper Conductor Cable in recessed PVC conduit 2.0 mm thick of required size with ceiling rose , without switch and switch board as directed by the deptt.Short poit up to 3.00 mtr. Length |
| 136 | Medium point up to 6.00 mtr. Length |
| 137 | Long point up to 10.00 mtr. Length |
| 138 | Extra Long point up to 15.00 mtr. Length |
| 139 | Wiring of sub-main with insulated (ISI or approved )HFFFR Copper conductor Cacle single core in reccessed conduit, 2.0 mm thick with earth continuity as directed by the deptt.2 x 2.5 sq. mm + 1 x 2.5 sq mm with 19mm dia 2.0 mm tick rigid PVC pipe. |
| 140 | 2 x 4 sq. mm + 1 x 2.5 sq mm with 19mm dia 2.0 mm tick rigid PVC pipe. |
| 141 | 2 x 6 sq. mm + 1 x 2.5 sq mm with 25mm dia 2.0 mm tick rigid PVC pipe. |
| 142 | 2 x 6 sq. mm + 1 x 2.5 sq mm with 32mm dia 2.0 mm tick rigid PVC pipe. |
| 143 | 2 x 10 sq. mm + 1 x 2.5 sq mm with 38mm dia 2.0 mm tick rigid PVC pipe. |
| 144 | Supplying with fitting and fixing 100 watt electronic modullar fan speed controller including making necessary connection as per direction of deptt. |
| 145 | Suppying including installation of socket outlet 6/16 Amps 3/5 pin combine shuttered complete as per diretion of dept. |
| 146 | Supplying including installation of socket outlet 6 Amps 3 pin combine shuttered complete as per direction of deptt. |
| 147 | Supplying with fitting ixing 16 Amps one way modular clip in switch in recessed system with lector/indicator including making necesssary connection complete as per direction of deptt. |
| 148 | Supplying with fitting fixing 6 amp one way modular clip in switch in recessed system including making necessaryconnection complete as per direction of deptt. |
| 149 | Supplying including and fixing of metal boxes in recessed system complete as per direction of deptt.1-3 module flush type |
| 150 | 4-5 module flush type |
| 151 | 6-8 module flush type |
| 152 | 10 module flush type |
| 153 | 16 module flush type |
| 154 | Supplying including and fixing of logic front plate of suitable colour as per direction of deptt.1 Module |
| 155 | 2 Module |
| 156 | 3 Module |
| 157 | 4 Module |
| 158 | 5 Module |
| 159 | 8 Module |
| 160 | 10 Module |
| 161 | 16 Module |
| 162 | MCB, MCCB, RCCB AND PANEL BOARD WORK Supplying with fitting and fixing industrial Plug & socket in surface mounting SPN sheet steel powder painted MCB DB oncorporated with MCB DINrail, neutral link Earth bar of the following rating of DP MCB complete with making necessary connection etc. as specified and directed by the deptt.20A capacity (ABB, SCHEIDER mg, LEGRAND, hAGER make) |
| 163 | Supplying with fitting and fixing sheet steel, phosphatised powder painted dust & Vermin proof double door IP-43 surface mounting SPN MCB DB incorporated with basbar, Neutral link, Earth bar and din rail etc fitted on wall with grounting nuts & bolts as required complete with making necessary connection etc. as specified and directed by the deptt.ABB, Schneider MG, legrnd, Hager make)12 way SPN doublr door. |
| 164 | Supplying with fitting and fixing sheet steel, phosphatised powder painted dust & Vermin proof double door IP-43 double door surface mountinghorizontal TPN MCB DB incorporated with basbar, Neutral link, Earth bar and din rail etc fitted on wall with grounting nuts & bolts as required complete with making necessary connection etc. as specified and directed by the deptt.ABB, Schneider MG, legrnd, Hager make)4 way TPN(8+12) double door. |
| 165 | Supplying with fitting and fixing single pole 10 KA 240/415V 50HZ MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt.C Series (Scheider MG, legrand, Hegrand make)6 to 32A |
| 166 | Supplying with fitting and fixing 30/100/300mA sensityvity 240/415V 50 Hz DPRCCB of the following capacity complete with msking necessary connection as approved, specified and directed by the deptt. 100/300mA sensityvity DP RCCB( ABB, Schneider MG, legrnd, Hager make)40A |
| 167 | Supplying with fitting fixing plug and socket D.B.\"s common for lexic MCB and load Kontakt/load stop with the followingFlush mounting distributors board with metal plug and socket 25 Amps load Kontakt MCB - 1 No |
| 168 | U.G.POWER CABLE LAID THROUGH GROUND Supply and laying of following size PVC/XLPE insulated nd PVC shethed 11 KV gd aluminium conductor LT armoured U.G cable laid in ground/partialy in air (10.0% of cable length) including excavation of cable trench upto depth of 75cm, refilling, protective brick covering, sand cushioning etc. complete handling of surplus spoil debries et. to proper place as specified and directed by the deptt.50.00 sq mm 3½ Core U.G. Cable |
| 169 | 300.00 sq mm 3½ Core U.G. Cable |
| 170 | Supply and laying of following size PVC/XLPE insulated nd PVC shethed 11 KV gd aluminium conductor LT armoured U.G cable laid in ground/partialy in air (10.0% of cable length) including excavation of cable trench upto depth of 75cm, refilling, protective brick covering, sand cushioning etc. complete handling of surplus spoil debries et. to proper place as specified and directed by the deptt.4.00 sq mm core U.G. Cable |
| 171 | 6.00 sq mm core U.G. Cable |
| 172 | U.G. POWER CABLE LAID THROUGH GI PIPESupply and laying of following size PVC/XLPE insulated nd PVC shethed 11 KV gd aluminium conductor LT armoured U.G cable laid in ground/partialy in air (10.0% of cable length) including excavation of cable trench upto depth of 75cm, refilling, protective brick covering, sand cushioning etc. complete handling of surplus spoil debries et. to proper place as specified and directed by the deptt.6.00 sq mm 3 Core U.G. Cable in 32mm dia medium quality G.I. Pipe |
| 173 | 300.00 sq mm 3½Core U.G. Cable in 100mm dia medium quality G.I. Pipe |
| 174 | EARTHINGSupply, installation & testing of G.I. earth station with perforated 40 mm dia and 4.50 Meter long heavy duty G.I. pipe with necessary 40mm dia. G.I. fittings such as Socket, Tee, elbow, nipple and 50 mm x 40mm G.I. reducing socket for funnel including locking arrangement 300 mm x 300 mm x 6mm hinged cover C.I. earth plate complete with digging of earth pit, construction of brick chamber and plastering of both inner and outer surafce of wall as specified and directed by the deptt. |
| 175 | Suppply, installation and testing of Copper Plate earth station with 600mm x 600mm x 3mm copper earth plate with necessary40 mm diaG.I. pipe with necessary 40mm dia. G.I. fittings such as Socket, Tee, elbow, nipple and 50 mm x 40mm G.I. reducing socket for funnel including locking arrangement 300 mm x 300 mm x 6mm hinged cover C.I. earth plate complete with digging of earth pit, construction of brick chamber and plastering of both inner and outer surafce of wall as specified and directed by the deptt |
| 176 | Extra for using salt (5K and Charcoal( 64 K in pipe earth station pit to provide low impedance ground in location of high soil resistivity as and when required and specified by the deptt. |
| 177 | Extra for using salt (5K and Charcoal( 96 K in G.I./Copper plateearth station pit to provide low impedance ground in location of high soil resistivity as and when required and specified by the deptt. |
| 178 | Supplying and laying of 25 x 5mm size G.I. strips drawn on surface from earth electrode to electrical switch gears, machineries etc. complete with supply G.I. nuts & bolts, screws etc including riveting, soldeiring & making necessary connection as approved, specified and directed by the deptt. |
| 179 | Supplying & laying of 6 SWG G.I. earth from Earth electrode (below G.L.) to electrical switch gears or electrical machineries including making necessary connection as approved, specified and directed by the deptt. |
| 180 | Supplying & laying of 8 SWG G.I. earth from Earth electrode (below G.L.) to electrical switch gears or electrical machineries including making necessary connection as approved, specified and directed by the deptt. |
| 181 | Supply, fitting and fixing of lighting Fiial Arrestor made of 25 mm dia 300 mm long solid copper tube having 85mm diasingle prong at top and 3 mm thick base plate at bottom complete with fitting & fixing with brass nuts & bolts on roof , RCC slab, top of column etc. specified and directed by the deptt. |
| 182 | LUMINARIES AND FANSSupplying with fitting, fixing of the following Clean room luminaries of CFL eigther surface mounting or recessed mounted as specified and directed by the deptt. Complete with all accessories such as bullest, lamp, starter etc.FBS 650 3 x PL-L 36 W EBP ROP GT Philips make CLARIA suitable for 3 x 36 PL-L lamps available in bottom opening options and also with toughened glass (IP 65 from front) clear ascylic versions(IP 54 from front) or equivalent (Equivalent will be selected by the deptt considering the mother items rate) WIPRO/JAQUAR make |
| 183 | Supplying, installation, testing and commision of the following indoor CFL/Fluroscent luminaries complete with all accessories such as ballast, starter etc. directly on wall/ ceiling including connection cable as approved by the Deptt.) with 1.5 sq mm P.V.C. insulated S.C. copper conductor as required and as directed by the deptt.Striplite luminaries complete with VPIT copper ballast/Electronic ballast and decorative end cap and 1 x 36/40 watt fluroscent tube.(Crompton Greaves make) Model-DG1114LDBCROMGOLD / DSG1114LDBN CROMGOLD NEW/ DSG1314EBCGGOLD / DSG 1414EB PLANET GOLD with super saver / Super Brite Lamp. Or equivalent ( Equivalent will be selected by the deptt. considering the mother items rate) PHILIPS/ WIPRO/ BAJAJ/ Havells/ HPL/ SOLAR/ JAQUAR make. [FL] |
| 184 | Supplying with fitting fixing of T5 luminaries complete with all accessories such as ballast, starter etc. directly on wall/ ceiling including connection cable, as approved by the Deptt.) with 1.5 sq mm P.V.C. insulated S.C. Copper conductor as required and as directed by the deptt.BATTEN LIGHT, ADRENO V 28 W TWG 207 with 1 x 28 W T-5 Fluroscent tube.(Philips make or equivalent) [TL] |
| 185 | SWF 331/MWF331, 1 x SON/PHITP 400W Phillips Make Integral floodlight luminarie with die cast Aluminium housing & toughened glass cover (IP-65) or equivalent (Equivalent will be selected by the deptt considering the mother items rate) Havells/ WIPRO/Bajaj/Crompton/HPL/SOLAR/JAQUAR make. |
| 186 | Supplying, installation, testing and commissioning of the ollowing CFL/Fluroscent luminries complete with all accessories such as ballast, starter etcl in the ceiling including supplying ball and socket arrangement suspension down rod of 19mm dia H.G conduit of required length max 0.75 cm including making necessary connection with 1.5 sq mm PVC insulted single core copper conductor as reqd. and as directed by the deptt.ii)Box type luminaries with copper ballast, arcylic cover & 1x40 watt. Fluroscent tube, (Philips make, model- TCS19/136LPF) [TL] |
| 187 | Supplying, installation, testing and commissioning of the following indoor decorative recessed type mirror ooptics luminaries complete with all accessories such as ballast, starter etcl in the false ceiling type amstrong/ Gypsum or similar ceiling mounting with necessary support/arrangeent including making necessary connection with 1.5 sq mm PVC insulated single core copper conductor as reuired and as directed by the deptt.ii) Decorative surfce mounting CFL luminaries with 1x9/11 watt. CFL lamp,FBS 185/109 (Philips make) [ML] |
| 188 | Supplying including fitting and ixing of the following luminaries complete with all accessories and making necessary connection with .5 sq mm PVC insulated S.C. copper conductor as reqd. and as directed by the deptt.ii) Recessed doenlighter with gear box and 1x70 watt. Metal Hallide lamp. (Philips make, model-MBS050/70) [CLM] |
| 189 | ii) Intigral Flood light luminaries complete with 1 x 150 watt MH lamp. (Philips make, model- MWF230-AK/150 (Asym) [FDL] |
| 190 | Supplying including fitting fixing of following star rated A.C. Ceiling fan complete with all accessories like down rod, canopy etc. of following sweeps with making necessary connection cable, as approved by the deptt [Without regulator] .(ORIENT PSPO make/ Usha make/ CROMPTON make/Havells/ATC/ V gaurd make)Energy efficient 5 star 1200 mm sweep. ORIENT PSPO/ Usha /CROMPTON/Havells/ATC or equivalent make.[F] |
| 191 | Supplying including fitting fixing of following A.C. wall fan in thewall of following sweeps with making necessary connection as approved by the deptt.) as reqd. complete and as directed by the deptt.(ORIENT PSPO make/ Usha make/ CROMPTON make/Havells or equivalent make)Striker high speed, 400 mm sweep usha make)/ Wind flow with plastic blade 400 mmsweep cromptonmake.) [WF] |
| 192 | Supplying including fitting fixing of ceiling fan Regulator including connection etc. complete as required complete and as directed by the deptt.Electronic Step Type. |
| 193 | MOTOR AND PUMPSET Supplying including installation, connection as approved by the Deptt. Testing and commissioning of CENTRIFUGAL MONOBLOCK PUMP SET complete as directed and specified by the deptt.3 HP single Phase Centrifugal monoblock pump set (Crompton Greaves / Aquatic/ CRI/ V- Guard make) 2900 rpm with DOL Starter (Crompton Greaves/ Control & Switch Gear/ BCH / L&T/ Sienemns make) |
| 194 | LED DOWNLIGHTERSupplying, installation, testing and commissioning of the following indoor decorative recessed type mirror ooptics luminaries complete with all accessories such as ballast, starter etcl in the false ceiling type amstrong/ Gypsum or similar ceiling mountinRecessed Smart Spot Downlight/Wall light, Model BBG360 1 xLXML-10-/WW SI or equivlent Model Philips make [CL] |
| 195 | Supplying, installation, testing and commissioning of the ollowing LED luminries complete with all accessories such as driver etc. directly on wll/ceiling including connection with 1.5 sq mm PVC insulated S.C copper conductor as required and as directed by the deptt.LED lamp indoor application, ooperating voltage 90V-250V, 12V DC ii. Model GN11J-3, LED Lamp with backup-Mails input, with 12V, 5Ah sealed maintenance free battery. (Make Philips/Bajaj/Schneider/Havells) |
| 196 | Supplying, installation, testing and commission of the following indoor decorative recessed typed mirror optics luminaries complete with all accessories such as ballast, starter etc. In the false ceiling type Armstrong/Gypsum or similar ceiling mountingFBH022 C 2xPLC/4P18W EB GR 2xPLC/4P18W240 V Philips Make Latina: Recessed square downlights with frosted glass inclusive of enclosed electronic control gear box. Die cast aluiium front plate including 2x 18 watt PLC CFL Lamp. [CFL] |
| 197 | NON-SCHEDULED ITEMSMain LOW Tension PanelSupplying and installation of metal enclosed floor mounted front operated front operated cubical type switch gear panel suitable for indoor installation conforming to IS:8623 (Part I & II). Pnel should be made of sheet steel and thickness not less than 2mm and structural steel having light section . The panel shall be completely dust tight vermin proof and shall be painted with anti-corrosive and anti condensation type two coats of primer and two coats of paint . All wiring shall be PVC insulated PVC shethered of 1100 volt grade of reqd. size. The panel should have provision of entry of cable at the bottom and also provision of out going feeders from the bottom of the panel. The panel shall incorporated busbar system of high quality electrolytic copper with uniform cross section. The panel shall consist of the following items (viz. multi function digital voltmeter, ammeter, CT, including lamps, selector switch etc.) connected as per drawing and shall be flush mounted on the front of the panelIncomer= a) 400 A 4P MCCB, 36 KA- 1 No., b) Bus-bars: 760 Amps TPN electrolytic copper bus bar of uniform cross-section- 1 set (50x10mm)Outgoing= c) 250 A 4P MCCB 36 KA- 1No, d) 63A 4P MCCB, 25 KA- 1 No., e) 40A 4P MCB -3 Nos., f) 32A 4P MCB-6 nos., g) 40A DP MCB-3 Nos., h) 25A DP MCB -5 Nos., i) Selector Switch-4 Nos., j) Digitl Multi function Meter, Ammeter, Voltmeter, PF meter- 1 No., k) CT 400/5Amps- 1No., l) Switch Fuse Unit-3 Nos. |
| 198 | Supplying with itting and fixing GLS spot light of make Decon Cat No.. 0199 Model G-hd (L) or equivalent with 1 Nos, 60W GLS lamp including making necessary connection etc. as specified and directed by the deptt. [BKS] |
| 199 | Supplying with fitting and fixing CFL recessed downlighter with patterened soeacular finish reflctor and semi enlosed gear box assembly, suitable for horizontal and with integrl turbo louver of mke Philips Cat No. FBH 150M 2xPL-C/4P 18W T HF 2 xPL-C/4P 18W or equivalent with 2 nos. 18W4P PL lamp including making necessary connection etc. as dpecified and directed by the deptt. [CLC] |
| 200 | Supplying with fitting and fixing recessed type LED skirting light with Extruded aluminium housing compraise of 1W Blue/White/Warm white LEDs mounted on MCPCB, invalute faceted reflector , SS clips for mounting supplied with seprate driver of make Bajaj Cat No. BGST 01 01 WW or equivalent with drivers etc. as required complete including making necessary connection etc. as specified and directed by the deptt. . [SKL] |
| 201 | Decorative Die Cast luminium Bollard with UV STBALIZED Polycarbonate diffuser Light with CFL Lamp including supplying of suitable mounting sstem duly paintedreputed make WIPRO Cat No. FBP 32118 1 x 18W CFL (TC-D) with 1 No. of 18W CFL lamp or equivalent Model. |
| 202 | Supplying with fitting and fixing pendent type luminrie with totally enclosed Anodised highbay Aluminium reflector of make bajaj Cat No. 162049 or equivalent with 1 No. 250W GLSLamp including making necessary connection with all accessories and making necessary arrangement for suspension with claim link etc. as speified and directed by the deptt. [SGL] |
| 203 | Supply & instalation of LT cable route marker with inscription, bolted/welded to 35cm x 35cm x 6mm iron, 60 cm long of following sizes150 mm dia CI marker |
| 204 | Supplying with fitting nd fixing sheet steel cable junction box of size 40 cm x 20cm x 15cm made of 16 SWG thick MS sheet with provision for hinge door and pannel locking arrangement complete oainted with 2 coats of metal primer and 2 coats of enameled gloss paint of approved brand and manufacture to give an even shape including cleaning surface to remove of all dirt, dust and other foreign matter, the box is to be fitted on the bottom section of pole with minimum 165 mm dia 25mm x5mm size flat iron pole clamp complete with mking necessary connection as directed consisting of the ollowing electrical items.12mm x 2mm x 15mm long 2 strip coper Bus-Bar- 1 set6-32 Amp \"L\" series DP MCB- 1 No.6 Amp \"L\" Series SP MCB as outgoing - 2 Nos. |
| 205 | Supplying fitting and fixing including making necessary connections of modular time switches of make Legrand Model Microex QT11 Cat No. 0037 40 or equivalent in existing distribution boards as require complete. |
| 206 | Supplying and installing following size of perforated pre-painted M.S. cable trays with perfration not mre tha 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required.300 mm width x 50 mm depth x 1.6 mm thickness |
| 207 | 450 mm width x 50 mm depth x 2.0 mm thickness |
| 208 | Supply, installation testing and commissioning of KVA UPS system Three phase input and Three phase output with 30 min battery backup using sealed maintenance free SMF Batteries and making necessary connections as required complete and directed |
| 209 | Supply, Fitting Fixing of Sock Treatement Chart |
| 210 | Supply, Installing antistic rubber mat suitable for 1.1 KV Volatge grade |
| 211 | Kramer(or equivalent as approved by the deptt.) Supplying, installation, testing, programming and commissioning of Audio and video equipment, 3x1:2 Computer Graphics video & Stereo Audio Switcher |
| 212 | Crown (or equivelant as approved by the Deptt.) Supplying installation, testing, programming and commisioning of Audio equipment, 8 Channel Power Amplifier, 125 W per channel @ 8ohms |
| 213 | JBL (or equivalent as approved by the deptt.) Supplying installation, testing, programming and commissioning of Audio equipment, Dual 15\" Two-way system in a Trapezodial enclosure; 2 x 2265H Differential Drive LF; 2452H 4\" (Diaphragm) HF on 70° x 50° Horn; Passiv or Bi Amplified Operation |
| 214 | JBL (or equivalent as approved by the deptt.) Supplying, installation, testing, programming and commissioning of Audio equipment, High Output Indoor/Outdoor Monitor Speaker. 150W Pink Noise, 300W Program power, 92 dB sensityvity. 70V/100V Taps at 110W, 55W &28W (and 14W at 70plus 8 ohm Thru. 110° x 80° Coverage with Rotatable Horn. Built in invisible Installation System plus Ten M6 Suspension Points. Kevlar Cone Woofer and Titanium Compression Driver. Includes Sonic guard(tm) Overload Protection. Includes MTC-PC2 Sealed-Entrance Panel Cover. |
| 215 | Supplying with fitting and fixing voltage stabalizer of the followiing speecification complete includingmaking necessary connection as approved, specified and directedby the Deptt. (SKYLAND/Vee-Dee/V-Guard/VERTEX/INDO/VENUS make)10.0 KVA Automatic Input 120-280 V Output 200-240 V |
| 216 | Supplying and installation of metal enclosed wall/floor mounted front operated cubical type switch gear panel suitable for indoor installation conforming to IS: 8623(Part I & II). The panel should be made of sheet steel and thickness not less than 2mm and structural steel having leght section. The panel shall be completely dust tight and vermin proof and shall be painted with with anti corrosive and anti condensation type two coats of primer and two coats of paint. All wiring shall be PVC insulated and PVC shethed of 1100 volt grade of required size. The panel should have provision of entry of cable at the boottom and also provision for out going feeders from the bottom of the panel. The bas bar shall be of high quality copper of uniform cross secton. The panel shall consist of the following items.(viz voltmeter, ammeter, CT, indicating lamps, selector switch etc.) connected as per per drawing and shall beflush mounted on the front of the panel.Incomer 160 A, 4P, MCCB, 25 KA- 2 Nos.160 A, 4P, on-load Changeover switch - 1 Nos. Digital Ammeter - 2 Nos.Digital Voltmeter - 2 Nos.CT 160/5 - 1 Nos.CT 160/5 - 1 Nos. Switch Fuse Unit- 6 Nos. Selector Switch - 4 Nos.Indicating lamp - 2 sets.Bus bars: 320 A TPN electrolytic Copper Bus Bar of uniform cross-section (40mm x 5mm) - 1 setOutgoing40A 4P MCB - 4 Nos. 40A DP MCB - 9 Nos.32A DP MCB - 3 Nos.40A, 4P, MCCB, 25 KA - 1 Nos. |
| 217 | 22 trSupply, installation, testing & commissioning of Air cooled Floor mountain Packaged type Air conditioner suitable for refrigerant R22/R407C with indoor unit consisting of hermatically sealed imported power efficient Scroll compressor and evaporator coil, blower fan, motor, air filter. The condenser shall consist of condensing copil and, fan and motor. The control shall be of microprocesor bases with following safety inbuild : HP/LP cut-out, SPPR(potection against single phasing and reverse polarity) In built-thermal /temperature protection. Microprocessor controller is provided with following features: Auto switch on or off of compressor memory back upto settings Auto restart after power failure Runtime equalisation of the compressors Built-in-time delay to protect compressor fault diagostics to facilities speedy correction the cost of the machine will also include 20Ghard drawn copper refrigerant piping properly saddles using wall spacers CPVC condenstate drain piping including U trap properly saddled, Fire Retardant Canvas Cloth Duct, electrical connection as approved by the department between IDU & ODU using ISI marked cables in 2mm thick/heavy rigid PVC IS:9537 Part-III conduit properly saddled, Nitrogen pressure testing of refrigerant circuit, Refrigerant gas charging ensuring optimum performanc, etc. complete in all respact. Approved make Bluestar, Voltas, Carrier, Hitachi, Daikin, Mitsubishi |
| 218 | Low side work (low side related to installation of ductable/packaged type air conditioners including the following work): GI Ducting as per approved drawing. The ducting will be made as per IS655. Only Tata and sail galvanised plain sheets will be used, Duct acoustic lining inside the first 4-5 meters of the duct using 10mm open cell nitrile acoustic insulation sheet of Arm cell Microbar or equiv. Duct thermal insulation on the entire duct lebgth using 12mm thick o class nitrile insulation(when the duct is passing through unconditioned area ) Wherever the duct is passing through unconditioned space, it will be insulated with 2 layers of 12mm thick O class nitrile insulation and then finally covered with Fibreglass Mat and 2 coats of UV paint be applied as finishing. All air thermals will be provided with alum. Collar dampers & aluminium powder coated grills and diffusers. |
| 219 | Supplying fitting, connection and fixing as approved by the deptt. 1/2 inch & 3/4 inch copper piping with insulation along with connection (as approved by the deptt.) Cable including testing and commissioning as direscted by the deptt. |
| 220 | Supplying including installation, testing and commissioning of Air//Water Cooled Diesel Generator set coupled to suitable alternator of 220/415 V, AC, 1/3 Phase 0.8 p.f. mounted on a 1) M.S. fabricated base frame,2) M.S. fuel tank of required capacity,3) Residual Silencer,4) AMF Control Panel,5) Suitable batteries with lead,5) First fill of lube oil,6) Acoustic Enclosure complete with all accessories as specified and directed by the deptt conforming to IS comprising the Technical Specification as per manufacturer.(RANGE FROM 5 KVA TO 625 KV. Kirlosker Green/bliss, Leyland, Volvo Penta, Perkinson, Mahindra, Greaves, Escort engine and Kirlosker, Stamford, Leroy somer or equivalent alternator.10-1-2070x820x1540-850kg -A/C |
| 221 | Supplying including installation, testing and commissioning of Air//Water Cooled Diesel Generator set coupled to suitable alternator of 220/415 V, AC, 1/3 Phase 0.8 p.f. mounted on a 1) M.S. fabricated base frame,2) M.S. fuel tank of required capacity,3) Residual Silencer,4) AMF Control Panel,5) Suitable batteries with lead,5) First fill of lube oil,6) Acoustic Enclosure complete with all accessories as specified and directed by the deptt conforming to IS comprising the Technical Specification as per manufacturer.(RANGE FROM 5 KVA TO 625 KV. Kirlosker Green/bliss, Leyland, Volvo Penta, Perkinson, Mahindra, Greaves, Escort engine and Kirlosker, Stamford, Leroy somer or equivalent alternator.10-1-2070x820x1540-850kg -A/C |
| 222 | Providing,Fixing, testing &Commissioning of Single Headed Gun Metal ISI Marked oblique pattern Hydrant Landing Valve with 80 mm dia, flanged inlet & 63 mm dia instantaneous type female outlet complete with cap and chain, twist release lug and all accessories as per IS:5290-19833 (Type-\"A\") and specifications complete as reequired . (MAKE:ESSEL/WINCO/NEWAGE) |
| 223 | Providing controlled percolating (C.P.) hose ISI Marked (IS:8423) 63 mm dia X 15 M long complete with instantaneous type Gun Metal 63 mm dia ISI Marked male & female couplings (IS:903) bound & riveted to hose pipes with copper rivets and copper wire complete as required.(MAKE: NIRMAL RUBBER/NEWAGE) |
| 224 | Providing & Fixing of Gun Metal fire Brigade Connection (inlet collection head) consisting of 63mm instantaneous type male coupling with built in check valves and 150 mm dia flanged outlet complete with bolts, nuts and rubber insertions as per IS:904-1983 complete as reqd.MAKE: ESSEL/WINCO/NEWAGEa) 02 way |
| 225 | Providing & fixing of Gun Metal fire Brigade suction hose coupling (draw out connection) with nut for female coupling as per IS:902-1974 complete with 150 mm dia GI suction pipe and foot valve (to be connected to static Tank) complete as reqd.(Make: Self Fabricated) |
| 226 | Providing,Fixing,Testing & Commissioning of Mild Steel Black Pipe(IS:1239part-I) Heavy class including cutting, screwing, welding etc. and providing all fittings viz forged steel screwed fitting upto 50mm dia and bolt welded above 50mm dia flanges, bends, tees, reducers, elbow, clamps, hangers etc including cutting holes and chases in brick or RCC walls/ slabs and making good the same to the approval of Engineer-in-charge/ consultant complete including painting with one coat of primer and two or more coats of synthetic enamel paint of approved make and shade including steel work complete as required.(Make:TATA/JINDAL/NEZONE)c)100 mm dia |
| 227 | Supply,installation,testing & commissioning of 150 mm dia installation control valve assembly comprising of vertical wet alarm valve, hydraulic alarm motor & gong, 15 mm dia Test Valve, 50 mm dia , Drain Valve and all necessary trimming connections including 02 nos. pressure gauge as per manufacturers catalogue complete as reqd.(UL/FM/LPC Listed/Approved)(Make : HD FIRE ) |
| 228 | FIRE EXTINGUISHERSupply, Installation, Fixing of DRY CHEMICAL POWDER Fire Extinguisher confirming to IS: 2171 with ISI mark and CO2 cartridge will be confirming to IS: 4947 with ISI mark, Powder will be confirming to IS: 4308 with ISI Mark (5 KG) BRAND : FIRESTOP / FIREND / FIRE SHIELD |
| 229 | Supply, Installation, Fixing of MECHANICAL FOAM (AFFF) Fire Extinguisher confirming to IS: 10204 with ISI Mark and CO2 Cartridge will be confirming to IS: 4947 with ISI mark, (AFFF) will be confirming to IS: 4989 with ISI Mark.(9 LTRS) BRAND : FIRESTOP / FIREND / FIRE SHIELD |
| 230 | Supply, Installation, Fixing of CARBON DIOXIDE Fire Extinguisher confirming to IS: 2878 with ISI Mark.(4.5 LITERS) BRAND: FIRESTOP / FIREND / FIRESHIELD |
| 231 | FIRE EXTINGUISHER REFILLING & SERVICINGRefilling & Servicing of ABC Type 05 Kg Capacity Fire Extinguisher with ISI Mark refill etc. complete |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
