Construction Of Building Near Leb Control Room In Manali Refinery Of Cpcl , Earth Work In Excavationinall Types Of Soil , Includingsoft Or Hard Murrum, But Excluding Soft And Hard Rock, Using Mechanical Means ( Hydraulic Excavators ) / Manually For Depth Upto 1.5M, Including Cutting And Dressing Of Sides In Slopes, Levelling, Grading And Ramming Of Bottoms, And Stacking Of Excavated Material Within A Lead Of 100M, Including Providing Temporary Supports To Existing Facilities Viz., Service Lineslikewater Pipes, Electric Under Ground Cablesetc. All Complete As Per The Specifications And Directions Of Engineer-In-Charge. , Same As Item No: 10 Above, But For Depth Beyond 1.5M And Upto 3.0M. , Backfilling After Execution Of The Work To The Proper Grade And Level With Selected Approved Available Excavated Soil Fromsoil Heaps Within A Lead Of 100M, Including Re-Excavating The Deposited Soil Excavated Earlier, Breaking Clods, Laying At All Depths And Heights In Layers Of Thickness Not Exceeding 150 Mm, Watering, Rolling And Ramming By Manual Methods / Mechanical Compactors, Dressing, Trimming Etc. In Foundations, Plinths, Etc.All Complete As Per Directions Of Engineer-In-Charge. , Excavating Trial Pits Manually Of Required Size & Depth Upto 3M At Locations As Specified With Necessary Shoring, Dewatering & Backfillingas Required, Etc. Complete As Per Specifications And As Directed By Engineer In Charge. , Transporting & Disposing The Surplus Earth & Debris Including Shrubs And Vegetations From Construction Area ( Beyond The Initial Lead Of 100M ) Todesignated Areas Within The Refinery Premises Up To A Lead Of 3Kmincluding Re-Excavating The Deposited Soil Excavated Earlier, Transportation, Loading, Unloading, Laying At All Depths & Heights, Stacking, Levelling And Dressing Both Areas ( Viz., From Where The Earth Is Transported And Where It Is Deposited ) To Required Levels And Slopes Complete With All Lifts As Directedby Engineer In Charge. ( Note: If Measured By Stacks 30%Voids Will Be Deducted. ) , Transporting & Disposing The Surplus Earth & Debris Including Shrubs And Vegetations From Construction Area ( Beyond The Initial Lead Of 100M ) To The Designated Area Outside The Refinery Premises Up To A Lead Of 7Km ( Vaikkadu Village ) Including Re-Excavating The Deposited Soil Excavated Earlier, Transportation, Loading, Unloading, Laying At All Depths & Heights, Stacking, Levelling And Dressing Both Areas ( Viz., From Where The Earth Is Transported And Where It Is Deposited ) To Required Levels And Slopes Complete With All Lifts As Directedby Engineer In Charge. ( Note: If Measured By Stacks 30%Voids Will Be Deducted. ) , Supplying And Filling M Sand Of Specified Quality Underfootings, Pedestal Etc. For All Depthsincluding The Cost Of Sand, Labour Charges, Tools And Tackles, Royalties, Transportation To Site For All Leads And Lifts, Including Loading, Unloading, Spreading In Layersnot Exceeding 150 Mm, Watering, Ramming, Compacting With Mechanical Compactors And / Or Other Equipment To Specified Levelall Complete As Perspecifications And Directions Of Engineer-In-Charge. , Supplying And Filling Approved Quarry Dust Of Specified Quality Under Floors, Plinths, Etc. For All Depthsincluding The Cost Of Quarry Dust, Labour Charges, Tools And Tackles, Royalties, Transportation To Site For All Leads And Lifts, Including Loading, Unloading, Spreading In Layer Not Exceeding 150 Mm, Watering, Ramming, Compacting With Mechanical Compactors To Specified Levelall Complete As Perspecifications And Directions Of Engineer-In-Charge. , Providing And Laying In Position Plain Cement Concrete ( Pcc ) 1:4:8 With 40Mm & Down Size Graded Aggregate For Levelling Course / Fill Under Footings, Pedestal Etc., For All Depthsincluding All Tools And Tackles, Labour And Material Charges, Curing, Compacting, In Any Shape, Level, Thickness, Position And Finishing The Surface Smooth / Rough Etc., Complete As Directed By Engineer-In-Charge. , Providing&Laying Dry Rubble Soling ( Hard Core ) With 20 To 40 Mm Size Metal, Under Foundations / Ground Floor Slab ( Grade Slab ) Etc., Including Filling Recesses By Grit, Stone Chips & Approved Murrum, Watering, Dressing, Compacting With Mechanical Compactors Etc., Complete As Per Drawings, Specifications And As Per Thedirections Of Engineer-In-Charge. , Providing, Mixing And Laying In Position Rcc M35 With 20Mm And Down Graded Coarse Aggregates As Per Is 456:2000 With A Minimum Cement Content Of 400Kg / Cu.M.Using 53 Grade Ordinary Portland Cement In Sub-Structure For All Depths Upto Ffl Level Including Cost Of Admixtures If Used, Labour Charges, Tools And Tackles, Providing Pockets, Openings, Recesses, Chamfering Etc., Wherever Required, Vibrating, Tamping, Curing And Rendering If Required To Give A Smooth & Even Surface And Providing Neat Cement Wash Etc., ( Excluding The Cost Ofreinforcement And Shuttering ) , Etc. All Complete As Specified And Directed By Engineer-In-Charge. , Providing, Mixing Andlaying In Position Rccm30 With 20Mm And Down Graded Coarse Aggregates As Per Is 456:2000 With A Minimum Cement Content Of 330Kg / Cu.M. Using 53 Grade Ordinary Portland Cement In Super-Structure For All Heightsabove Ffl Level Including Cost Of Admixtures, Labour Charges, Tools And Tackles, Providing Pockets, Openings, Recesses, Chamfering, Wherever Requried, Vibrating, Tamping, Curing And Rendering If Required To Give A Smooth & Even Surface, Providing Neat Cement Wash, Etc. ( Excluding The Cost Of Reinforcement, Shuttering ) , Etc. All Complete As Specified, And Directed By Engineer-In-Charge. , Providing And Fixing Straight / Inclinedcentering And Shuttering In Sub Structure For All Depths Upto Ffl Levelincluding Strutting, Bracing, Propping Etc. Keeping The Same In Position During Concreting And De-Shuttering & Removal Of The Same After Specified Period As Per Specifications.Keeping Necessary Provision For Inserts, Projecting Dowels, Or Any Other Fixture Etc. All Complete And As Specified And Directed Byengineer-In-Charge Complete With All Tools And Tackles, Materials, Labour Charges, Consumables Etc. ( Form Work Shall Be Supplied By The Contractor And Shall Remain The Property Of The Contractor ) , Providing And Fixingstraight / Inclined Centering And Shuttering In Super Structure At All Heights Above Ffl Level Including Strutting, Bracing, Propping Etc. Keeping The Same In Position During Concreting, De-Shuttering & Removal Of The Same After Specified Period As Per Specifications Etc., Keeping Necessary Provision For Inserts, Projecting Dowels, Or Any Other Fixture Etc. All Complete And As Specified And Directed Byengineer-In-Charge Complete With All Tools And Tackles, Materials, Labour Charges, Consumables Etc. ( Form Work Shall Be Supplied By The Contractor And Shall Remain The Property Of The Contractor ) , Supplying, Fabricating And Placing In Position High Strength Deformed Steel Bar Reinforcement Of Grade Fe500 For Rcc Work, Straightening, Cleaning, Decoiling, Cutting, Bending To Required Shapes And Lengths As Per Details, Binding With Contractors Own 16 Standard Wire Gauge ( Swg ) Black Soft Annealed Binding Wire At Every Intersection, Supplying And Placing With Proper Cover Blocks, Supports, Overlaps, Chairs, Spacers, Lifting Hooks Etc For All Heights & Depths Etc. All Complete As Directed By Engineer-In-Charge. , Providing And Laying Brick Masonry In Sub Structureup To Ffl Level Using Cement Mortar 1:5 ( 1 Cement:5 Coarse Sand ) For Alldepthsincluding The Cost Of Materials, Labour, Tools And Tackles, Scaffolding / Staging, Sampling And Testing, Soaking Of Bricks, Cutting And Laying Of Bricks, Providing Recesses, Making Openings Of Any Shape And Size, Embedding The Fittings, Curing, Etc. All Complete As Per Specifications, And As Directed By Engineer-In-Charge. , Providing And Laying Brick Masonry In Super Structureabove Ffl Level Using Cement Mortar 1:5 ( 1 Cement:5 Coarse Sand ) For Allheightsincluding The Cost Of Materials, Labour, Tools And Tackles, Scaffolding / Staging, Sampling And Testing, Soaking Of Bricks, Cutting And Laying Of Bricks, Providing Recesses, Making Openings Of Any Shape And Size, Embedding The Fittings, Curing, Etc. All Complete As Per Specifications, And As Directed By Engineer-In-Charge. , Providing And Laying Half Brick Masonry In Cement Mortar 1 : 4 ( 1 Cement : 4Coarse Sand ) For All Depths And Heightsincluding Cost Of Materials, Cement, Labour, Scaffolding, Sampling, Testing, Supplying And Placing 2 No. 8 Mm Dia. Diarebars At Every Fourth Course, Sealing The Gap Between Masonry And Soffit Of The Beam / Slab, Embedding The Fittings And Fixtures, Curing, Etc. All Complete As Per Specifications, And As Directed By Engineer-In-Charge. Note:- The Cost Of Reinforcement Shall Be Paid Seperately Under Relevant Items. , Providing 15Mm Thick Cement Plasterin Cement Mortar 1:4 ( 1Cement:4 Fine Sand By Volume ) Onbrick Masonry / Concrete Surfaces Including Preparation Of Base, Cleaning, Chipping, Scaffolding, Finishing, Curingincludingmouldings And Providing Grooves In Plaster, Bands, Mouldings Etc. As Specifiedfor All Depths And Heights Including Labour Charges, Tools And Tackles, Material Costs Etc. As Per Specifications And Asdirected By The Engineer-In-Charge. , Providing 12Mm Thick Cement Plasterin Cement Mortar 1:4 ( 1Cement:4 Fine Sand By Volume ) Onbrickmasonry, Concrete Surfacesincluding Preparation Of Base, Cleaning, Chipping, Scaffolding If Required, Finishing, Curingincludingmouldings And Providing Grooves In Plaster, Bands, Mouldings Etc. As Specifiedfor All Depths And Heights Including Labour Charges, Tools And Tackles, Material Costs Etc. As Per Specifications And Asdirected By The Engineer-In-Charge. , Providing 6Mm Thick Cement Plaster In Cement Mortar 1:3 ( 1Cement:3 Fine Sand By Volume ) On Roof Ceilings, Concretesurfaces Including Preparation Of Base, Cleaning, Chipping, Packing Of Electrical Works, Scaffolding, Finishing, Curing Etc.For All Heights Complete With All Labour Charges, Material Costs, Tools And Tackles Etc.As Per Specifications And As Directed By The Engineer-In-Charge. , Providingandapplying Two Coats Of Interior Emulsion With Wall Putty Of Approved Make Of Any Shades / Coloursover One Coat Of Primer Asper The Specifications Includingnecessaryscaffolding And Surface Preparation Consisting Of Application Of Plaster Of Paris Punning Over Entire Surface, Filling All Holes And Depressions With White Cement, Applying A Coat Of Primer, Two Or More Coats Of Oil Based Putty ( As Per Manufacturers Recommendations ) Sand Paperingetc. In Walls And Roof Ceiling, Complete As Per Specification And As Directed By Engineer-In-Charge. , Providing And Applying Textured Interior Wall Painting System Of Two Or More Coats Of Asian Or Approved Equivalent Brand Of Required Shade And Finish And Including Necessary Priming Coat Of Approved Brand Of The Same, Sealer Coat, Finish Coat With Glossy Or Matt Finish Including Necessaryscaffolding And Surface Preparation, Sand Papering, Filling All Holes And Depressions, Cracks With Putty, Etc. All Complete As Per Specifications And Directions Of Engineer-In-Charge. , Providing And Applyingweather Proof Textured Exterior Paint On Rcc / Brick Walls / Plastered Surface Etc. Of Asian , Nerolac, Berger Or Any Other Equivalent Approved Make, One Coat Of Primer Andtwo Or More Coats ( To Give A Smooth And Even Shade ) Of Anti-Fungal, Water Proof, Anti Flakingweather Proof Paintof Approved Quality And Shade Etc. Asper The Specifications Includingnecessaryscaffolding, Cleaning And Surface Preparation, Preparation Consisting Of Application Of Plaster Of Paris Punning Over Entire Surface, Filling All Holes And Depressions With Plaster Of Paris, Applying A Coat Of Primer, Two Or More Coats Of Oil / Water Based Putty ( As Per Manufacturers Recommendations ) Sand Papering Etc., All Complete As Per Specification And As Directed By Engineer-In-Charge. , Providing And Applying Textured Granular Type Wall Coating Of Bakelitehylam Ltd. Or Approved Equivalent, Consisting Of Twin Pack Fine Gradesilica Granules / Dry Flakes Made Of Special Grade Of China Clay / Granite Type Flakes Of Heritage Or Equivalent In Approved Shade And Texture;Mixed In-Situ With 100% Acrylic Polymer Bonding Agent; Applied Overplastered Surfaces; The Granules / Flakes Etc., Bonding Material, Mixing, Method Of Application, Surface Preparation Etc. All Shall Be As Per Manufacturers Recommendations And Specifications All Complete As Directed By Engineer In Charge. , Providing & Fixing Ofpremium Quality Vinyl Laminate Of 2Mm Thickness As Wall Panelling Of Required Texture, Pattern And Type Inbrick Walls And Gypboard Partition Walls .This Includes Making Necessary Surface Preparations, Edge Protections, Making The Laying Surface Smooth, Dry And Undulation Free, Supplying And Applying Fevicol - Sr998 Fw Adhesive, Supply And Fixing Ofskirting Materials If Necessary, Material Cost, Tools And Tackles, Specialised Labour Charges Etc. All Complete As Directed By Engineer In Charge. , Supplying, Transporting, Storing, Fabricating & Erecting In Position Bolted And / Or Weldedstructural Steel Works Like Angles, Channels, Beams, Plates, Square / Round Bars, Pipes, Tubesfor Ladders At All Heights & Levels And Locations Including All Builtup Sections / Compound Sectionsmade Out Of Rolled Sections And / Or Plates / Bent Plates For Curb Edging Etc., Cutting To Required Size, Straightening / Bending If Required, Edge Preparation, Cleaning, Scrapping & Welding, Preheating, Finishing Edges By Grinding, Fixing In Line And Level, Including Preparing The Surface For Painting, Surface Cleaning, Wire Brushing, Removal Of Mill Scale, Dust, Rust, Oil Or Grease Etc Complete Along With Providing Paint System As Follows: ( A ) Applying Inorganic Zinc Silicate Coat 75 Micron Dft ( B ) Two Coats Of Epoxy Primer Paint 75 Micron Dft Each ( C ) Two Coats Of Anti Rust Epoxy Top Coat Paint 100 Micron Dft Each As Per Manufacturers Specifications And As Directed By Engineer-In-Charge. Note:-One Coat Of Zinc Silicate And One Coat Of Epoxy Primer Shall Be Applied On Structural Steel Surfaces After Grit Blast Cleaning In Workshop Prior To Erection As Per Specifications And As Directed By Engineer-In-Charge. Supply Of All Materials In Contractors Scope. , Providing And Laying Of Premium Quality Glazed Vitrified Tiles Of Size 800X800of Kajariaor Approved Equivalent, Decorative Type Of Tiles, Approved Make With Bed Of 20Mm Thick Cement Mortar 1:3 In Line And Level Including Cleaning The Finished Surfaces With Oxalic Acid Including Skirting Out The Joints, Flush Pointing Of Joints Of Tiles With Cement Paste / Grout Mixed With Colour Pigments Matching The Shade Of Tiles, 4Skirting All Around As Per Drawing , Along With Material Costs, Tools And Tackles, Labour Charges Etc.As Per Specifications, Standards And Instructions Of Engineer-In-Charge As Per Drawing. , Providing And Laying Of Premium Quality Antiskid Ceramic Tiles Of Size 300X300 Ofapproved Make Floor Matt Finished Colour, Nonslip, Decorative Type Of Tiles, Approved Make With Bed Of 20Mm Thick Cement Mortar 1:3 In Line And Level Including Cleaning The Finished Surfaces With Oxalic Acid Including Skirting Out The Joints, Flush Pointing Of Joints Of Tiles With Cement Paste / Grout Mixed With Colour Pigments Matching The Shade Of Tiles, With Material Costs, Tools And Tackles, Labour Charges Etc.As Per Specifications, Standards And Instructions Of Engineer-In-Charge. , Providingand Laying Coloured Glazed Ceramic Tiles For Wall / Dado ( Grade I Quality ) , Ofapproved Make & Shade Including 20 Mm Thick Cementbedding C.M. 1:3, Pvc Beading With Matching Colour, Pointing And Finishing Exposed Joints With White Cement / Matching Colour Pigment, Etc., Including Cleaning The Finished Surface, All Complete With Material Costs, Tools And Tackles, Stagings Labour Charges As Perspecifications And As Directed By Engineer-In-Charge. , Providing And Fixing Tiled False Ceiling- Celotex Pin Mineral Fiber Ceilings- Of Size 595X595mm In True Horizontal Level Suspended On Interlockingsaint-Gobaingyproc Matrix 32 Metal Grid Of Hot Dip Galvanised Steel Section ( Galvanised At 120 Gms / Sq.M Both Sides Inclusive ) Consisiting Of3600mm Longmain T Runner Size 24X32mm And 0.30Mm Thick 1200Mm Long Cross T Of Size 24X25 Mm And 0.30 Mm Thick -600Mm Secondary Cross T Of Size 24X25mm And 0.30Mm Thick Andppgi Wall Angle Of Size 24X24 Mm And 0.4 Mm Thick. Bottom Exposed Capping Ofwidth 24 Mm Of All T - Sections Shall Be Of 0.25 Mm Thick Ppgi. Wall Angle Is Fixed Along The Perimeters Of The Celing To Walls, Partitions Or Columns Etc With Rawl Plugs And Wooden Screws At 300 Mm Centers. Main T Runners Are Then Suspended From Ceiling Using Gi Slottedcleats Of Size 27 X 37 X 25 X 1.6 Mm Fixed To Ceiling With 12 Mm Dia And 38Mm Long Dash Fasteners, 4Mm Gi Adjustable Rods With Galvanized Butterly Level Clips Of Size 85 X 30 X 0.8 Mm Spaced At Max 1200Mm C / C Along Main T And Not More Than 150Mm From Spliced Joints.The Last Hanger At The End Of Each Main Runner Should Not Be Greater Than 600Mm From The Adjacent Wall.Then 1200Mm Long Cross T Is Interlocked Between The Main T At 600Mm C / C To Form A Grid Of 1200X600mm And Then Secondary Cross T Of Length 600Mm Is Then Interlocked At The Middle Of The 1200X600mm Grid To Form Grid Of 600X600mm.Cross Tees At The Ends Having Length More Than 600Mm Are To Be Supported Independently .Finally The Tiles Are Placed In This Grid.The Work Is To Be Executed All Complete At All Elevations Including Material Costs, Labour, Tools And Tackles As Directed By Engineer-In-Charge. , Providing And Fixing Suspended Saint-Gobain 12.5Mm Gypboard Plain Panel Ceiling Including Gypsteel Ultraperimeter Channelis Fixed Along The Perimeter Of Existing Wall / Partition With The Help Of Hilti Hps - 1 ( 6X40 ) Impact Anchor, At 600Mm Centres.Gypsteel Ultra Ceiling Anglewith Soffit Cleat And Or Gyproc Rawl Plug-8X45mm Creating 1220Mm X 1220Mm Grid.Gypsteel Ultra Intermediate Channelis Fixed To The Gypsteel Ultra Ceiiing Angle With M6 X 12Mm Hex Bolt & Hex Nut Arrangement Or With 2 Nos Of 4.2X13 Gyproc Metal Screw. The Gypsteel Ultra Ceiling Sectionis Then Fixed To The Gypsteel Ultra Intermediate Channelwith The Help Of Gyproc Connecting Clipand In Direction Perpendicular To The Intermediate Channel At 457Mm C / C. Single Layer Of 12.5Mm Tapered Edge Gypboard Plain ( Conforming To Is 2095 Part 1 : 2011 ) Is Then Screw Fixed To Ceiling Section With 25Mm Drywall Screwsat230mm Centres.Finally Square And Tapered Edges Of The Boards Are To Be Jointed And Finished So As To Have A Flush Look Which Includes Filling And Finishing With Jointing Compound & Joint Paper Tape.The Work Is To Be Executed All Complete At All Different Elevations Including Material Costs, Labour, Tools And Tackles As Directed By Engineer-In-Charge. , Providing And Fixing In Positionupvc Doors Both Single Leaf / Double Leaf White In Colour Comprising Of Glass Panel Minimum 5Mm Thick And Upvc Panels Of Minimum 15Mm Thickness ( Doors May Be Either Partly Glazed Partly Paneled Or Fully Panelled ) With Upvc Stiles, Rails, Frame And Accessories Holdfasts, Hinges, Pull Handles On Both Sides, Locking Arrangement As Per Requirementincluding Labour Charges, Material Cost, Tools And Tackles All Complete As Per Specifications & As Directed By Engineer-In-Charge. , Providing And Fixing In Position Two Track Two Panel Sliding Upvc Windows ( With Clear 5Mm Thick Glass ) , White In Colour Including All Fixtures, Fastenings, Sliding System, Sliding Handle With Flush Lock, Epdm Gaskets, Wool Pile Etc., Making Recesses In Brick / Concrete Surfaces And Making Good The Same After Fixing All Complete As Per Directions Of Engineer-In-Charge. , Providing And Fixing Bright Finished Brass 100Mm Mortice Latch And Lock Isi Marked With Four Levers And A Pair Of Polished Stainless Steel Decorative Handles ( Size Of Handles To Match The Door Size ) With Necessary Screws Etc. Complete ( Best Make Of Approved Quality ) As Specified By Engineer-In-Charge. , Providing And Fixing Solid Sheet Vinyl Wall Paper Of Minimum 150Gsm , Embossed With Textured Effect Pasted To Wall Using Flake Adhesive To Be Fixed On To The Walls / Partitions Neatly With Out Shrinkage And Bubbles And Should Have Seamless Joints. The Design , Shade And Colourshall Be As Directed By Engineer In Charge. , Providing And Fixing Drywall Partition Of Gypwall Quite - 97Mm Thick ( With 50Mm Glass Wool Insulation ) Gypsteel Ultraacoustud Partition Including Single Layer Of Tapered Edge 12.5Mm Thickgyproc Sound Blocfixed To Either Side With Gyproc Drywall Screws Of 25Mm At 300Mm C / C And 150Mm C / C At Periphery Of Wall To Either Side Of 70Mmgypsteel Ultraacoustud ( 0.5Mm Thick Having One Flange Of 41 Mm And Another Flange Of 44Mmmade Of Gi Steel ) . Studs Are Placed At 600Mm Centre To Centre In 72Mm Gypsteel Ultrafloor And Ceiling Channel ( 0.5Mm Thick Having Equal Flanges Of 32Mm Made Of Gi Steel ) . Floor And Ceilingchannel Are Anchored To The Floor & Ceiling Slab Using Suitable Anchor Fasteners At 600Mm Etc In Zigzag Manner.12.5Mm Thick Gyproc Sound Bloc Board Strip Of 94Mm Width Is Placed Between Ceiling Channel And Ceiling Slab. Stud And Floor Channel Are Crimped Together By Using Crimping Tool. A 70Mm Gypsteel Ultrafloor Channel ( 0.5Mm Thick Having Two Flanges Of 32Mm Each ) Is To Be Fixed Using Gyproc Metal To Metal Flat Head Screws At The Horizontal Joints Of The Boards. 50Mm Glass Wool Slab Of Density 20Kg / M3 Has To Be Provided In The Framework. The Boards Are To Be Fixed Vertically To The Framework With Joints Staggered To Avoid Leakage Through Joints. Finally Square And Tapered Edges Of The Boards Are To Be Jointed And Finished So As To Have A Flush Look Which Includes , Filling And Finishing With Gyproc Jointing Compound, Gyproc Joint Paper Tape. The Junction Of The Partition With Masonry & All Penetration Through The Partition Has To Be Treated With Fire And Acoustic Sealant. The Work Is To Be Executed As Per Specifications Including Material Costs, Labour, Tools And Tackles As Directed By Engineer-In-Charge. , Providing And Fixing Isi Marked, Overall 30Mm Thickblock Board Flush Door Shutters Of Kutty Or Approved Equivalent Decorative Type, Consisting Of Solid Core Block Board Bonded With Phenol Formaldehyde Synthetic Resin And Faced On One Side With Decorative1mm Thick Laminate And Another Side With Water Proof Laminate Of Archidply Or Approved Equivalentincluding Providing And Fixingt Type Second Class Teakwood Perimeter Beading Fixed By Means Of Approved Quality Neoprene Based Adhesive And Nailing @ 300Mm Max., Providing And Fixing 125Mm Long Stainless Steel Butt Hinges [ For Each Shutter ( Vertical Spacing Not Exceeding 600Mm ) Including Providing Wooden Filler / Sealer, Stainless Steel Lock With Status Indicator, Teak Wood Lipping, Aluminium Butt Hinges, 3Mm Thick Anodised ( Anodic Coating Not Less Than15 Microns ) Aluminium Kicking Plate Fixed With Screws For Entire Door Width On Either Side Of Door For A Height Of 600Mm, Fixing With Door Frame, Door Bush, Finishing Etc . All Complete As Directed By Engineer-In-Charge. , Providing And Fixingsecond Class Teak Wooden Framesfor Doors, Windows, Ventilators, Cupboards Etc. For All Heights Including All Labours, Tools, Tackles, Cutting, Shaping, Jointing, Applying A Coat Of Bituminous Paint On Concealed Surface, Wood Primer On Exposed Surface, Fixing In Masonry / Rcc By Means Of 300Mm X 25Mm X 6Mm Thick M.S. Hold Fasts Screwed To Frame @ 600Mm Max Vertically And Grouted With 1:2:4Concrete By Volume In Min. 350Mm X 100Mmx100mm Sized Hole Made In Masonry / 96Mm Long, 12Mm Dia M.S. Dash Fastner, Painting With Two Coats Of Approved Shade And Make ( Ici Or Equivalent ) Synthetic Enamel Paint Over Appoved Quality Primer Coat, Finishing Etc. All Complete As Dirercted By Engineer-In-Charge. , Providing & Laying To Required Slope Cement Concrete Screed Of Mix 1:1.5:3 ( 1 Cement : 1.5 Coarse Sand: 3 Coarse Aggregates 12.5Mm And Down Graded Aggregates ) Using 53 Grade Opc Inroof Terrace Etc. Laid To Required Slope And Thickness & Inclusive Of Curing / Pond Curing, Brooming With Wire Brush, Finishingetc.All Labours, Tools And Tackles Complete As Per Drawing, Specification & As Directed By Engineer In Charge. , Providing And Laying Water Proofing Membrane To Roof Of Atactic Poly Propylene ( App ) With Non-Woven Polyster Reinforcement Having Thin Poly Ethylene Foil Of Approved Quality Inculding Cleaning, Crack Filling, Rendering And Necessary Fixing Arrangements As Per Manufacturers Specifications, Rate Shall Include Supplying & Sprinkling Pea-Sized Gravel Or Grit Devoid Fine Sand Over Member Complete As Per Drawing, Specifications And As Directed By Engineer-In-Charge. ( The Thickness Of Atactic Poly Propylene ( App ) Membrane To Be Considered As 4.0Mm ) , Providing & Fixing White Glazed Earthernware Indian Pan Type Water Closetof Parry Ware Or Approved Equivalent With Integral Footrest, Includingall Fittings, P Or S Traps, Cutting Walls, Floors Making Good Of Same, Finishing, Soldered Joints, Making Inlet / Outlet Connection, Providing Min. 150 Mm Thick Sand Cushion, Finishing, Etc.All Complete As Directed By Engineer-In-Charge. , Providing And Fixing 18Mm Thick Machine Cut, Mirror Polished, Premoulded And Pre-Polished Machine Cut Granite For Platformsof Approved Qualityfor Wash Basin / Vanity Counters, Pantry Etc.Of Required Size Of Approved Shade, Colour, And Texture Laid 20Mm Thick Base Cement Mortar 1:4 ( 1 Cement:4 M Sand ) With Joints Treated With White Cement, Mixed With Matching Pigment, Epoxy Touch Ups, Including Machine Polishing To Edge To Give High Gloss Finish, Providing Machine Cut Opening For Fixing Wash Basin, Rubbing, Curing, Moulding & Nosing Etc. Complete At All Levels As Directed By Engineer-In-Charge. , Providing & Fixing White Wall Hungeuropean Water Closet ( Ewc-Rimless Type ) With Concealed Cistern ( Concealed Cistern With Full Frame & Chrome Finish Push Plates All Complete ) Of Parry Ware Or Approved Equivalent Make Including All Fittings, Slim Line Health Faucet With Hose & Hook, Other Standard Accessories, All Fittings And Fixturesincluding Cutting Walls, Floors Making Good Of Same, Making Inlet / Outlet Connection, Finishing, Etc.All Complete As Per The Directions Ofengineer-In-Charge. , Providing And Fixing White Glazed Earthern Warehalf Stallurinal ( Sensor With Manual Angle Valve Arrangement ) Of Parryware-Whiz Or Approvedequivalent Including Fixing Concealed Ac / Dc Sensor With Stainless Steel Finish Of Parryware Cyclops Or Approved Equivalent, Includingcp Urinal Push Angle Valve, Cp Brass Spreader With 32 Mm Dia Pvc Pipe, Tee, Distribution Pipe, Brackets Etc. Making Inlet & Outlet Connections Fixing With Cp Brass Screws, Finishing, Etc. All Complete As Directed By Engineer-In-Charge. , Providingandfixingin Position White Glazed Earthern Ware Vitreous China Below Counter Wash Basin Ofparryware-Luna Or Approved Equivalent With One C.P Brass Single Lever Pillar Cock With Aerator Tap Of Parryware-Spark Or Approved Equivalent, One No Ofcp Angle Valve With Wall Flange, C.P. Brass Waste, Pvc Drain Pipewith Heavy Bottle Trap Of Parry Ware Or Approved Equivalent Make, C.I. Brackets And All Accessories Complete Including Cutting Walls, Floors And Making Good The Same, Painting All Exposed Metallic Surfaceswith 2 Coats Of Approved Shade And Quality Synthetic Enamel Paint Over An Approved Quality Priming Coat Of Red Oxide Zinc Chromate Making All Connections, Fixing, Finishing, Etc. All Complete As Per Specifications And As Directed By Engineer-In-Charge. , Providing And Fixingmirror Of Superior Glass Of Parryware Or Approved Equivalent Complete With Cp Brass Screws, Fastners And Washers Complete As Directed By Engineer-In-Charge. , Providing And Fixing600 Mm Long Cp Rodtowel Rail Of Parry Ware Make Or Approved Equivalent Complete With Brackets Fixed To Wooden Cleats With Cp Brass Screws With Concealed Fitting Arrangement Of Approved Quality And Colour All Complete As Specified By Engineer-In-Charge. , Providing And Fixing In Position Approved Quality Liquid Soap Dispenser Ofeuronicsor Approved Equivalent Make, Of Standard Size With Snap Fittings, Including Drilling Holes, Fixing With Cp Screws All Complete As Directed By Engineer-In-Charge. , Providing And Fixing C.P. Brass Shower Rose 100Mm Diameter With 15 To 20Mm Inlet Of Parryware Or Equivalent Approved Including 230Mm Shower Arm, Making Inlet And Outlet Connections, Etc. Completeas Directed By Engineer-In-Charge. , Providing And Fixing Of Cp Brass Twin Robe Hook Of Parryware / Approved Equivalent Including Fixing The Coat Hook Including Drilling Holes On Plastered / Tiled Wall And Doors Fixing The Coat Hook With Cp Screws Including All Fittings & Fixtures, Labour Tools And Tackles, Making The Good The Same, All Completeas Directed By Engineer-In-Charge. , Providingandfixing In Position White Glazed Earthern Ware Vitreous Chinadivisional Plate Partition For Urinals Of Size 350X675x130mmparryware-Magnum Or Approved Equivalentplacedbetweenurinalsanchoring And Fixing The Divisional Plate With Fastners / M.S. Channelssuitably Embedded In Wall With Grouting, Painting All Exposed Metallic Surfaces With Two Coats Of Approved Shade And Quality Synthetic Enamel Paint Over An Approved Quality Priming Of Red Oxide Zinc Chromate, Making Good Of All Damaged Work, Finishing Etc., All Complete As Per Specification And As Directed By Engineer-In-Charge. , Providing And Fixing15 Mm Nominal Outer Dia. & Sdr11 Chlorinated Poly Vinyl Chloride ( Cpvc ) Pipes ( Exposed On Wall ) , Of Approved Equivalent Make Having Thermal Stability For Hot & Cold Water Supply Including All Cpvc Plain & Brass Threaded Fittings & Accessories Including Fixing The Pipe With Clamps At 1M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent And Testing Of Joints Complete As Per Directions Of Engineer-In-Charge. , Same As Sl. No:-530 Above, But For 20Mm Nominal Outer Dia. Pipes , Same As Sl. No:-530 Above, But For 50Mm Nominal Outer Dia. Pipes , Providing And Fixing 80Mm Dia. Nominal Boreunplasticised Rigidpvc ( Upvc Pipe ) - Sch. 40 Water Line Pipes On Wall Face Conforming To Is: 13592 Type A Including Jointing With Seal Ring Conforming To Is: 5382 Leaving 10Mm Gap For Thermal Expansion ( Single Socketed Pipes ) With Necessary Fittings / Accessories Etc.All Complete As Per Specifications And As Directed By Engineer-In-Charge. , Same As Sl. No. 560 Above, But For 100Mm Dia. Nominal Bore Pipes. , Same As Sl. No. 560 Above, But For 150Mm Dia. Nominal Bore Pipes. , Providing And Fixing 150 Mm Dia. Rigid Pvc Rain Water Pipeswith Ms Holder Clamps Including Fixing / Embedding Into Masonry / Concrete, Providing Connections Like Shoes, Vents, Specials, Bends Etc. Fixing In Perfect Plumb Etc. All Complete Including Jointing With Bonding Solution Of Approved Quality And Make With Pressure Rating Of 4 Kg / Sq.Cm Including Clamps, Connections, Etc. Complete As Per Specifications And As Directed By Engineer-In-Charge. , Providing And Fixing100 Mm Dia.Rigidpvc Pipes With Pressure Rating Of 4 Kg / Sq.Cm Of Approved Brand Including All Fixtures As Vent Pipe For Septic Tank, Machine Welded, Rubber Ring Jointsusing Approved Lubricant, Making Hole In The Slaband Restoring The Same To The Original Condition Including Provision Of Cowl In The Septic Tank Vent Pipe Etc. Complete As Per Specifications And Directions Of Engineer-In-Charge. , Providing And Fixing Two Way Bibcock Single Lever Range With Flange Of Parryware Or Equivalent Approved 15Mm Nominal Bore Cp Including Fixingand Connections, Etc. Completeas Directed By Engineer-In-Charge. , Providing And Fixing Parryware Or Equivalent Approved 15Mm Nominal Bore Brass Bibcock Including Breaking Walls And Making Good The Same, Inlet And Outlet Connections, Etc. Completeas Directed By Engineer-In-Charge. , Providing And Fixing Parryware Or Equivalent Approved 15Mm Nominal Borebrass Angle Valve Including Breaking Walls And Making Good The Same, Inlet And Outlet Connections, Etc. Completeas Directed By Engineer-In-Charge. , Providing And Fixing 50 Mm Nominal Bore Gun Metal Gate Valve ( Lever Type ) Lever Of Approved Quality Including All Fittings Etc. Complete As Directed By Engineer-In-Charge. , Supplying And Laying Custom ( Prefabricated ) Pvc Floor Sumps / Floor Traps Fabricated Out Of 110Mm Dia. 6 Kg / Cm2 Class Pvc Pipes With Inlet And Outlets From 40Mm Upto 75Mm, Including Providing Water Seal, Fixing To A Perfect Level, Laying Cement Concrete In 1:3:6 Mix Cp / Pvc Colour Grating With Frame At 4Mm Below Finished Floor Level Making Holes In Masonry Or Concrete Cutting Surfaces Conveying All Dismantled Portions And Clearing The Site, Making Leak Proof Joint And Testing, Etc. Complete And As Directed By Engineer-In-Charge. , Providing And Fixing Coloured 10 Litre P.V.C Low Level Flushing Cistern With Manually Controlled Device ( Handle Lever ) Deluxe Dual Flushofparryware Or Approved Equivalent Make With All Fittings And Fixtures Complete As Directed By Engineer-In-Charge. , Providing And Fixingaluminium Extruded Section Body Tubular Type Universal Hydraulic Door Closerof Approved Make With Double Speed Adjustment With Necessaryaccessories And Screws With All Labour Charges, Tools & Tackles Etc. All Completeas Directed By Engineer-In-Charge. , Providing, Hoisting And Fixing In Position Rcc Precast Elementswithreinforced Cement Concrete Grade 1:1.5:3 ( 1 Cement: 1.5 Coarse Sand: 3 Graded Stone Aggregate ( 20Mm & Down Size ) Withopc 53 Grade Cementfor Cable Trench, Storm Water Drain And Septic Tank Cover Slabs For All Leads, Levels, Shapes And Thickness Including All Moulds, Shuttering And Centering, Vibrating, Tamping, Curing, Chamfering, Providing Lifting Hooks, Levelling, Aligning And Fixing / Laying In Position, All Complete ( Excluding Cost Of Reinforcement ) And As Directed By Engineer-In-Charge. All Material Including Cementto Be Supplied By The Contractor. , Supply And Installation Of Cylindrical Triple Layer White Virgin Plastic Storage Tank Of Capacity 1000 Litres Of Sintex Or Approved Equivalent Onground Floor Roof With Lid And Making Necessary Cutout / Holes For Inlet, Outlet And Overflow Pipes, Necessary Connections And Sealing All Joints Properly, All Complete. Including, Fixing, Transportation To Work Site All Complete As Per Drawings And Directions Of Engineer-In-Charge. , Demolishing Reinforced Cement Concrete ( Taking All Necessary Safety Precautions ) Manually / By Mechanical Means For All Depths And Heights Below And Above Plinth Level Including Supply Of All Tools & Tackles Labours, Necessary Scaffolding, Propping, Underpinning, Cleaning And Including, Cutting, Straightening, Scrapping Of Rebars And Disposal Of Unserviceable Material Within The Refinery Premises Upto A Lead Of 3Kmas Directed By The Engineer-In-Charge. , Demolishing Plain Cement Concrete ( Taking All Necessary Safety Precautions ) Manually / By Mechanical Means For All Depths And Heights Belowand Above Plinth Level Including Supply Of All Tools And Tackles, Necessary Scaffolding, Propping, Underpinning, Cleaning And Disposal Of Unserviceable Material At Designated Places Within The Refinery Premises Upto A Lead Of 3Km As Directed By The Engineer-In-Charge. , Supply Of Unskilled Labourto Carry Out Petty Works Not Assessable For Measurements / Minor Repair Works, On Day-To-Day Basis. The Rates Shall Include Esi, Pf, Payroll Cost And Allowances, Fringe Benefits, Overhead Supervision, Profits Andhand Tools Etc. All Complete As Directed By Engineer In Charge.
