|
| 1 | Dismantling ofexisting Plaster including disposal of refuse as directed by Engineer-in-charge with in a distance of 60 meter (200 feet) |
| 2 | 12 mm thick plaster with one part cement and four parts of approved coarse sand including supply of all materials, labour and T&P etc, required for proper completion of work including making of groove in plaster surface. |
| 3 | 12 mm thick plaster in ceiling with one part cement and three parts of approved coarse sand including supply of all materials, labour and T&P etc, required for proper completion of work including making of groove in plaster surface. |
| 4 | Cement concrete with 20mm gauge stone grit, coarse sand and cement in propoortion 4:2:1 including supply of all materials, labour and T&P etc, required for proper completion of work. |
| 5 | Scrapping old white or colour wash including disposal of refuse as directed by Engineer-in-charge with in a distance of 60 meter (200 feet). |
| 6 | Providing & applying of wall putty in two coats on old surface to make plaster surface smooth with approved quality meterial of Berger/J.K./Birla or similar make including supply of all materials, labour and T&P etc, required for proper completion of work. |
| 7 | Finishingwall with two coat of water proof proof cement paint Weather coat of approved quality on proviously old treated surface with this paint to give an even shade including supply of all materials, labour and T&P etc, required for proper completion of work. |
| 8 | Distempring two coat with oil bound distemper of approved brand andManufacture and required shade of un-decorated wall surface with an even shade over and including a primer coat with cement primer of approved brand and Manufacture such as of British, Shalimar, Ashian paint afterthourouly brushing the surface free from dirt & other foreign material and also including preparing the surface even and sand prepared smooth including supply of all materials, labour and T&P etc, required for proper completion of work. |
| 9 | Painting or varnishing or polishing with french spirit polish on old wood work with one coat of ready mixed priming coat after removing old polich/paint and two coats of approved superior quality french spirit polish including supply all materials, labour and T&P etc, required for proper completion of the work. |
| 10 | Painting or varnishing on iron work or wood work with one coat of ready mixed priming paint and two coats of approved superior quality (British, Asian of equivalent make) read mixed synthetic enamel paint including supply all materials, labour and T & P etc, required for proper completion of the work. Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade One or more coats on old work. |
| 11 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes confoming to IS:13592 Type A, including jointing with seal ring conforming to IS:5382, leaving 10 mm gap for thermal expansion, (i) single socketed pipes of 110 mm diameter including supply of all materials, labour and T&Petc, required for proper completion of the work. |
| 12 | Two coat painting of roof or over brick work or where ever required with bitumen @ 0.85 kg. per sqm in each coat including supply of all materials, labour and T&Petc, required for proper completion of the work. |
| 13 | Mild steel or ironwork in heavy sizes such as trusses; built up gates, door, frames, record racks, roof work, gates etc, wrought to required form including drilling holes. Rivetting or welding where necessary and also including supply of all materials, labour and T&Petc, required for proper completion of the work. |
| 14 | Providing and laying Ceramic glazed floor tiles of size 300x300mm (thickness to be specified by the manufacturer) ofIst Quality conforming to IS:15622 of approved make in colours such as white, Ivory, Grey, Fume Red Brown, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand),Jointing with grey cementslurry @ 3.3 kg./sqm. including pointing the joints with white cementand matching pigment etc. including supply of all materials, labour and T&Petc, required for proper completion of the work. |
| 15 | Providing and fixing of 20 mm nominal outer dia Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain& brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing.This includes jointing of pipes& fittings with one step CPVC Solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in charge, Concealed work,including cutting chases and making good the walls, including supply of all materials, labour and T&Petc, required for proper completion of the work. |
| 16 | Providing and fixing of 25 mm nominal outer dia Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain& brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing.This includes jointing of pipes& fittings with one step CPVC Solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in charge, Concealed work,including cutting chases and making good the walls. |
| 17 | Providing and fixing water closet squatting pan (Indian type WC pan) of size 580x440 mm with intregal type, 10 litre low level white PVC flushing Cistern with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required, including supply of all materials, labour and T&Petc, required for proper completion of the work. |
| 18 | Providing and fixing white vetreous china pedestal type water closet (European type) wc pan with ISI marked white solid plastic seat and lid, 10 litre low level white vitreous china flushing Cisterm & CP brass flush bend with fitting & CI Brackets, 40 mm flush bend, overflow arrangement with specials of standand make and mosquito proof coupling of approved municipal design complete including painting of fittings and brackets, cutting and making good the walls and floors wherever required, including supply of all materials, labour and T&Petc, required for proper completion of the work. |
| 19 | Providing & fixing white vitreous china wash hand basin including making all connections but excluding the cost of fittings: Flat back wash basin of 630x450 mm including supply of all materials, labour and T&Petc, required for proper completion of the work. |
| 20 | Providing & fixing P.V.C. waste pipe for sink or wash basin including PVC waste fittings complete. 40 mm dia ( semi rigid pipe) including supply of all materials, labour and T&Petc, required for proper completion of the work. |
| 21 | Providing & fixing CP brass long nose bib cock of approved quality comfirming to IS standard and weighingnot less than 810gms. 15mm nominal bore, including supply of all materials, labour and T&Petc, required for proper completion of the work. |
| 22 | Providing & fixing CP brass angle valve for basin mixer and geyser points of approved quality comfirming to IS ; 8931. 15mm nominal bore, including supply of all materials, labour and T&Petc, required for proper completion of the work. |
| 23 | Providing & fixing uplasticised PVC conection pipe with brass unions 15mmnominal bore & 45cm length including supply of all materials, labour and T&Petc, required for proper completion of the work. |
| 24 | Providing and fixing lst quality ceramic glazed wall tiles conforming to IS:15622 thickness to be specified by the manufacturerof aproved make, in all colours, shades except burgundy, bottlegreen black of any size as approved by Engineer-in-Charge in skirting, risers of of stepsand dados, over 12 mmthick bed of cementmorter 1:3 (cement :3 coarse sand and jointing with grey cement slurry 3.3 kg per sqm. including pointing in white cement mixed with pigment of matching shade complete including supply of all materials, labour and T&Petc, required for proper completion of the work. |
| 25 | Providing and fixingdouble scaffolding system (cup lock type ) on the exterior side upto seven story height made with 40 mm dia M.S.tube1.5 m centre to centre, horizontal & vertical tubes. Joining with cup & lock system with M.S. tubes, M.S. tube challies, M.Sclamps and M.S staircase system in the scaffolding for working platform etc. and maintaining it in a serviccable condition for the required duration as approved and removing it there after the scaffolding system shall be diffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineer-in- charge . The elevational area of the scaffolding shall be measured for payment purpose. The payment will be made once irrespective of duration of scaffolding. |
| 26 | Providing & fixing P.V.C. low level flushingcistern with manually controlled devise (handle lever ) comfirming to IS: 7231, with all fittings and fixtures complete 10litre capacity-coloured, including supply of all materials, labour and T&Petc, required for proper completion of the work. |
| 27 | Providing and fixing white vitreouschina flat back or wall corner type lipped front urinal basin of 430x260x350 mm or340x410x265 mm sizes respectively including supply of all materials, labour and T&Petc, required for proper completion of the work. |
| 28 | Making khurras 45x45cm with average minimum thickness of 5cm cement concrete 1:2:4 over PVC sheet in 1mx1mx400micron, finished with 12mm cement plaster 1:3 and a coat of neat cement, rounding the edges and making and finishing the outlet complete including supply of all materials, labour and T&Petc, required for proper completion of the work. |
| 29 | Providing gola 75x75mm in cement concrete 1:2:4 including finishing with cement mortar 1:3 as per standard design including supply of all materials, labour and T&Petc, required for proper completion of the work. |
| 30 | Supply and fixing of anonized aluminium door & window having 2mm thick aluminium section inculding coating and average coating of 20 micron fully glazed made of aluminium door tube size 83.5x44.65mm as vertical member and 1140x44.45mm size tube in bottom and horizontal member door chaukhat should be of aluminium tubular vertical with two openable shutter the rate will include cost of material fixture 4mm glass handles locks screw necessary bending and excluding cost of floor spring if required for proper completion of the work as per direction of engineer in charge, including supply of all materials, labour and T&Petc, required for proper completion of the work. |
| 31 | Providing & placing of 500 Ltr. Capacity polyethylene tank approved quality on terrace polyethylene water storage tank of approved brand and manufacture with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank, including supply of all materials, labour and T&Petc, required for proper completion of the work. |
