|
| 1 | Earth work in excavation by manual/mechanical meansin foundation trenches or drains (not exceeding 1.5M in width as well as 10Sqm on plan/over areas (exceeding 30 cm and upto 1.5 m in depth,1.5 m in width as well as 10 sqm on plan ) including dressing of sides ramming of bottoms lift up to 1.5M including getting out the excavated soil and disposal of surplus excavated soil within a lead of 5km from site /edge cutting or as directed by EIC. disposed earth to be leveled and neatly dressed in all kinds of soil including pumping out water caused by springs,tidal or river seepage,broken water means or drains and the like complete during execution of work. |
| 2 | Re-filling of available excavated earth in foundations and under floors including watering, and compacting |
| 3 | Providing and Laying Stone soling Hand packed incl. compacting by hand compactors and incl. carriage of all materials |
| 4 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering. All work up to plinth level 1:4:8 (1Cement: 4 coarse sand: 8 grade stone aggregate 40mm nominal size) (crushed) |
| 5 | Reinforced cement concrete work in walls (any thickness),including attached pilasters,buttresses,plinth and string courses,fillets,columns,pillars,piers,abutments,postssuspended floors,beams,foundation etc upto floor five level excluding cost of centring,shuttering,finishing and reinforcement in 1:1.5:3 (1 cement:1.5 cooarse sand:3 gradedcrushed stoneaggregate 20 mm nominal size) |
| 6 | Reinforcement for RCC works including straightening, cutting, bending placing in position and binding all complete. Thermo Mechanically Treatedbars. including all carriages . |
| 7 | Providing and laying in position cement concrete of specified grade excluding C/o centering and shuttering all work upto plinth level in 1:3:6 (1 cement : 3 coarse sand : 6 stone agg. using 20mm nominal size)including curing complete . |
| 8 | Centreing, Shuttering using Kitply laminated shuttering boards and removal of same for |
| 9 | Foundation, Footings, bases of columns etc |
| 10 | Lintels, Beams Plinth beams etc |
| 11 | Column, Pillers, piers etc |
| 12 | Suspended Floors, roofs Landings etc |
| 13 | Stairs Except Landings |
| 14 | Circular Columns |
| 15 | Brick work using75 A bricks in (1:6) mix mortar incl finising of joints and mainaining groves of 10mm thick, incl extra upto F-3rd level and cost of all carriages |
| 16 | Providing wood work in frames of doors, windows, clesrestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately) imported Kail wood including all carriages.. |
| 17 | Providing and fixing of 40X5mm flat iron hold fast 40 cm long including fixing to frame with 10mm dia bolts, nuts and wooden plugs and embeddings in cement concrete block 30X10X15 cm 1:3:6 mix ( 1 Cement : 3 Coarse sand :6 graded stone aggregate 20 mm nominal size) including all carriages and cost of materials involved. |
| 18 | Providing and Fixing 150mm dia PVC pipes embeded in concrete, complete |
| 19 | Providind and fixing 35 mm thickpanelled or panelled and glazed shutters for doors,windows and clerestory windows including ISI marked M.S prepared butt hinges bright finished of required size with necessary screws excluding panellingwhich will be paid separetelybut including glazing ,all complete including carriages as per direction of engineer-in-charge First class kail wood |
| 20 | Providing and fixing 35 m thick wire guaze shutters using galavanised M.S wire guaze of average width for aperture 1.4 mm in both direction with wire of dia 0.63 mm for doors,windows and clerestory windows with ISI marked M.S pressed bright finished butt hinges with b necessary screws of required size including carriages complete First class kail wood . |
| 21 | Providing and Fixing 12mm thick Laminated Board of specified shadeand finished with Kail wood beadings complete (laminated on both sides) |
| 22 | Providing and Fixing 3.5 mm thick float Glass panes including fixing with kail wood beadingof First Class Kail wood, chamfered and finished as specified |
| 23 | 12 mmcement plasterof mix 1:6 (1 cement:6 coarse sand) includingcuring complete. |
| 24 | Providing and Applying 6 mm thick cement Plaster on ceilings in (1:3) nominal mix |
| 25 | Structural Steel work welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat all complete and all carriages involved. |
| 26 | Providingcolour coated(HI rib)G. S. sheet roofing fixed with GIself screwswith pvc caps of matching colour design and pattern as per directions of Engineer-in -chargebolts and nuts excluding the cost of purlins,rafters and trusses with0.50mm thick including carriages all complete. |
| 27 | Providing and fixing 0.50mm thick plain GI sheets of specified colour and brand in ridges / hips etc of width 600mm |
| 28 | Providing and fixing 0.50mm thick GI plain sheets of specified colour and brand in valleys etc of width 900mm |
| 29 | Providing & Fixing 32mm thick and 250mm wide Eaves Boarding in 2nd class Kail wood fixed with nuts / bolts complete |
| 30 | Providing and Fixing Steel Soffits using 25mm ISA and 1mm thick m.s. steel sheets incl applying one coat of red oxide primer |
| 31 | Marble stone flooring with 16 mm (average) thick marble stone (sample of marble shall be approved by engineer-in-charge) over 20 mm (average) thick base of cement mortar 1:4(1 cement:4 coarse sand ) laid and jointed withcement slurry includingrubbing and polishing complete including all carriages.Raj Nagar plain marble or similar marble |
| 32 | Providing and Fixing Marble stone in Dedo/risers of approved specified marble |
| 33 | Cement concrete flooring 1:2:4 ( 1cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. Complete. 50 mm thick with 20mm nominal size stone aggregate(Crushed) |
| 34 | Providing and Fixing Vitrified ceramic tiles of size 600mm x 600mm of thickness not less that 8mm finished with non-skid finish on (1:3) mix and finishing with white cement mixed with matching pigments. |
| 35 | Providing and applying white cement basedputty (Birla or equivalent )of 2mm thickness over plastered surface to prepare the surface even and smooth including all carriages complete |
| 36 | Distempering with oil bound washable distemper ofapproved brand and manufacture to give an even shade.New work (two or more coats) over and inluding priming coat with cement primer including all carriages. |
| 37 | Finishing walls with Exterior / Excel paint of required shade New work (two or more coats) |
| 38 | Applying priming coat with ready mixed pink or grey primer of approved brand and manufacture on woodwork (hard and soft wood) |
| 39 | Painting two or more coatswith ready mixed synthetic enamel paint ofapproved brand and manufacture in all shades to give an even shade on wood / Steel work |
| 40 | Providing & Fixing hardware fittings of Anodized Alumunium of specified brand |
| 41 | Handles 100mm |
| 42 | Tower Bolts 150mmx 10 mm |
| 43 | Window Hooks |
| 44 | Handles 150mm |
| 45 | Tower Bolts 200mm x10 mm |
| 46 | Aldrops (with Link Lock) |
| 47 | Providing and fixing ceramic glazed Digital walltiles 300*300 mm(thickmness to be specified by the manufacturers not less than 6 mm ) of 1st quality conformingto IS:13755 of NITCO,ORIENT,SOMANY,KAJARIA,or equivalent make in all colours,such as White,Ivory,Grey,Fume red,Brown sizelaid on 20 mmthick bed of Cement Mortar 1:4 (1 cement:4 coarse sand) and jointed with white cement andmatching pigment etc complete including all carriages. |
| 48 | Providing and Fixing PPR pipeslines of approved quality and brand in walls including cost of cutting of chases and filling in the same with (1:3) mix mortar incl cost of all fittings tee/elbows/unions/ sockets etc wherever required of following nominal sizes |
| 49 | 25mm dia |
| 50 | 20mm dia |
| 51 | 15mm dia |
| 52 | Providing and Fixing PVC Waste lines of approved quality and brand in slabs/beams/walls including cost of cutting of chases and filling in the same with (1:3) mix mortar incl cost of all fittings tee/bends/collars etc wherever required of following sizes: |
| 53 | 75mm dia |
| 54 | 100mm dia |
| 55 | Providing and fixing PVC P-Traps including connecting with WC\"s of reqired size complete incl cost of all accessories, washers etc |
| 56 | Providing and fixing PVC Floor Trap 0f 75 mm dia including jointing with 75mm dia waste pipes incl cost of all accessories, washers etc |
| 57 | Providing and fixing white vitreous china pedestal typewater closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever) conforming to IS:7231, with all fittings and fixing, complete including cutting and making good the walls and floors wherever requied W.C. pan with ISI marked white plastic solid seat and lid (Hindustan or equivalent) |
| 58 | Providing and Fixing Ceramic Wash basin of specified size including Pedestal and CP waste and C.P brass pillar tapswith PVC Waste pipe all assesories complete |
| 59 | Providing and fixing of CP fixtures of Jaguar /Hindware /Cera / Essel/Parko or equivalent make including jointing testing and making good to surfaceas directed by the site Engineer including all carriages. |
| 60 | 15mmdia Stop Cocks |
| 61 | Angle Valves |
| 62 | CP Health fucet |
| 63 | Providing and fixing 450mm long PVC Connections incl cost of washers conplete |
| 64 | Providing and fixing of 35 ltr water heater gyser (Venus/Recold/Jaguar or equivalent make including nuts and bolts and necessary fittings including all carriages complete job. |
| 65 | Constructing brick masonry manholes of size 450 mm X 450 mm\" in cement mortar1:4 ( 1 cement : 4 coarse sand) , foundation concrete 1:4:8 mix ( 1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size) inside plastering 12 mm thick with cement mortar 1:3 ( 1 cement: 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finsihed with a floating coat of neat cement complete as per standard design including PVC frame with cover complete job including all carriages and costs. |
| 66 | Providing and placing on terrrace (at all floor levels) polyethene water storage tank ISI:12701 marked indicating the BIS License No with cover and suitable locking arrangement and making necessary holes for inlet,outlet and overflow pipes but without fittings and base support for tank(Sintex,Electroplat,Star,Lotus or equivalent having valid ISI license) including all carriages. |
| 67 | Dry Stone Masonary using quarry stones laid dry in foundations incl boanding etc |
| 68 | Providing & Laying of PVC Conduits of approved quality before laying RCC Slab 25mm dia |
| 69 | Providing & Laying of PVC Conduits of approved quality before laying RCC Slab 20mm dia |
| 70 | Providing & Fixing CI junction fan box of approved quality to be fixed before laying RCC Slab |
| 71 | Providing & Fixing CI junction box of approved quality to be fixed before laying RCC Slab |
| 72 | Providing and fixing tiled False Ceiling of specified materials of size 595x595mm in true horizontal level suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 gms/sqm both side inclusive ) consisting of main “T” runner with suitably spaced joints to get required length and of size 24x38mm made from 0.30mm thick (minimum) sheet spaced at 1200 mm center to center and cross “T” of size 24x25 mm made of 0.30mm thick (minimum) sheet, 1200mm long spaced between main “T” at 600mm center to center to form a grid of 1200 x 600mm and secondary cross “T” of length 600mm and size 24x25 mmmade of 0.30mm thick (minimum) sheet to be interlocked at middle of the 1200x600mm panel to form grids of 600x600mm and wall angle of size 24x24x0.30mm and laying false ceiling tiles of approved texture in the grid including, wherever, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main “T”runners to be suspended from ceiling using GI slotted cleats of size27x37x25x1.6mm fixed to ceiling with 12.5mm dia and 50mm long dash fasteners, 4mm GI adjustable rods with galvanized butterfly level clips ofsize 85x30x0.8 mm spaced at 1200mm center to center along size85x30x0.8 mm spaced at 1200mm center to center along main T, bottomexposed width of 24mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge fully perforated Gypsum Board tile . Work complete in all respect as per the drawing to the satisfaction of Engineer in-charge. 12.5 mm thick tapered edge gypsm moisture resistant board |
| 73 | Providing wood work in frames of false ceiling, partitions etc sawn and fixed in position using Budloo wood |
| 74 | Providing & Fixing 50mm (compressed) thick rockwool panels for aquastic measures, covered with white cloth |
| 75 | Providing & Fixing 10mm thick Plywood in partition wall ceilings etc. |
| 76 | Providing & Fixing Wall paper of approved degign, shade and manufacture. |
| 77 | Providing & Fixing 15mm thick Rubber Wood Panels 125mm wide on walls with a gap of 6mm between each panel, including finishing with two or more coats of wooden polish |
| 78 | Supplying and Installation of Auditorium Chairs with Auto Trip up Mechanism with Push back features of size (89 cm height, 60cm width and 70 cm Depth Specifications as per Annexure I |
| 79 | Providing and Fixing of scroll carpet with pile fibre composition of 100% olefil, yarn type - BCF of pile weight 750 gm / Sqmm, total pile weight 1750 gm/Sqmm, pile height (2.5-4.8-5.5)mm. Total thickness 7mm having primary backing woven polypropelene that meets VOC emission of ASTM D5116-97, flamability ASTM D-2859/FF1-70/16 CFR 1630. Reacttion to fire ENISO 9239-1: 2002, static propensity AATCC-134-1996, colour fastness specification meeting ISO 105A03, B-02, E-01, Soiling propensity co-effecient meeting ISO 11378 over 6 to 8 mm foam fixed with SR solution |
| 80 | Carriage of materials |
| 81 | Sand & Stone Agg for 10 KM |
| 82 | Stones for an avg lead of 10 KMs |
| 83 | Bricks for a lead of 15 KMs |
| 84 | ELECTRIC PART |
| 85 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI boxetc. as required. Make:- Anchor/Indoasian/havells |
| 86 | Supply and fixing of 5 inch dia Fan Box / concealed box with round sheet cover for covering the base and bottom and dual painted with red oxideMake:- Anchor/Indoasian/havells 0r equivalent |
| 87 | Providing Installation testing and commissioning ofCeiling Fans of approved brands with connections etc as requiredMake:- Anchor/Indoasian/havells 0r equivalent |
| 88 | Supply & Fixing of additional Fan rodsMake:- Anchor/Indoasian/havells 0r equivalent |
| 89 | Supplying and fixing two module Stepped type electronic Fan Regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. Make:- Anchor/Indoasian/havells 0r equivalent |
| 90 | Supply,installation,testing and commissioning of Ceiling LED Panel type 15 watt day milky fitting with connections as required ( Make:- Anchor/Indoasian/havells 0r equivalent |
| 91 | Supply & installation, of Conciel Box for LED Panelas required Make:- Anchor/havells/CG or equiv. |
| 92 | Supplying and fixing of1x18 watt LED fiiting 4 feet long wall /surface mounted including connections etc as required Make:- Anchor/ CG /havells 0r equivalent |
| 93 | Supplying and fixing of 24x24 inch 36W slim LED Panel lights including AuditoriumMake:- Anchor/Indoasian/havells 0r equivalent |
| 94 | Supply & Installation of Exhaust Fans With Stylish Plastic Exhaust 150 mm in the existing opening including connections,testing commissioning etc as required(L Make:- Anchor/ luminous/havells 0r equivalent |
| 95 | Supply & Installation of WallFansincluding connections,testing commissioning etc as required( Make:- Anchor/ CG /havells or equivalent |
| 96 | Providing and fixing Single Bracketmirror Light decorative type surface mounted and complete with 9 watt LED Bulb.(Make:- Anchor/Indoasian/havells 0r equivalent |
| 97 | Providing ,installation,testing and Commissioning of 50 watt LED Flood light with connection etc as requiredMake:- Anchor/ luminous or equi |
| 98 | Supply & drawing 2 pair0.5 sqmm FR PVC Insulated annealed copper conductor,unarmoured Telephone cable in the existing surface/recessed steel/ PVC Conduit as requiredMake:- Anchor/Indoasian/havells 0r equivalent |
| 99 | Supplying and fixing of Telephone Socket outlet modular Switch/ Socket on the existing Modular Plate and switch box including connections but excluding modular plateas requiredMake:- Anchor/ CG /havells 0r equivalent |
| 100 | supply and fixing of modular D-link Computer socket on modular zinc passivated box of 2 module (Make:D-Link) |
| 101 | Providing & Laying D-Link Cat-6 Computer wire in existing Conduit Make:D-Link |
| 102 | Supply and fixing ofCeiling rose on the existing junction box/wooden box including connections as required Make:- Anchor/Indoasian/havells 0r equivalent |
| 103 | Supply and fixing Modular Blanking Plate on the existing modular plate and switch box excluding modular plateas required Make:- Anchor/Indoasian/havells 0r equivalent |
| 104 | Supply and fixing Indicator on the existing modular plate and switch box excludingas requiredMake:- Anchor/Indoasian/havells |
| 105 | Supply ,instalation,fabrication and commissioning of Low voltage Sub Main Panel on 415 volts 3 phase 50 htzs of 2mm thick CRCA / Sheet of powder size 3X4 rft . a)Providing and fixing od 300 amp TPN A1.Bus bar with required nos of thimbles etc b)250 amp 4 pole MCCB with breaking capacity c)125 amp 4 pole change over switchd)63 amp SPN (10 nos) e)VSS meter/switch f) ASS meter/ switch g)CTs 200/5 amp rating Make:- Anchor/Indoasian/havells 0r equivalent |
| 106 | Supply & Fixing of following size of medium class PVC Conduits along with accessories in surface / recess including cutting the wall and making good the same as required in case of recessed conduits Make:- Anchor/ CG /havells |
| 107 | 25 mm |
| 108 | 40 mm |
| 109 | Supplying and fixingof following way horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) Make:- Anchor/Indoasian/havells |
| 110 | 8 way (4 + 24) double door |
| 111 | Supply & Fixingfollowing sizeTPN |
| 112 | 63 amps TPNMake:- Anchor/Indoasian/Schneider |
| 113 | Supply & Fixingfollowing size SPN(LMR)Make:- Anchor/Indoasian/havells |
| 114 | SPN 63 amps |
| 115 | 40 ampsSPN Make:- Anchor/Indoasian/havells |
| 116 | Supplying and fixing of 5 amps to 32 amps rating 240/415 volts \"C\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required of Approved Brand.Make:- Anchor/Indoasian/havells 0r equivalent |
| 117 | Wiring for circuit/ submain wiring along with earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. Make Havells or equivalent |
| 118 | 2x1.5 sq. mm + 1 x 1.5 sqmm |
| 119 | 2 x 2.5 Sqmm + 1 x 2.5 sqmm |
| 120 | 2 x 4 Sqmm + 1 x 4 sqmm |
| 121 | 2 x 6 Sqmm + 1 x 6 sqmmearth wire |
| 122 | 4 x 16Sqmm + 2 x 6 sqmmearth wire |
| 123 | Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc.& Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections for HEATING pointsetc. as required. |
| 124 | 6 Module (200mmX75mm) |
| 125 | 6 pin 15/16 A socket outlet&15/16 A switch |
| 126 | 5 pin 5/6 A socket outlet & 5/6 A switch |
| 127 | Supplying and fixing suitable size 8 module GI Box with modular plate & cover infront including providing 3 Nos 6 Amp modularsocket Controlled by 16 Amp Switch including connections etc. as reqd. Make:- Anchor/Indoasian/havells |
| 128 | Supplying and fixing following 5 pin 5/6 A modularswitch /socket on the existing modular plate & swichbox including connections etc. as reqd. Make:- Crabtree/Roma/havells |
| 129 | Supplying and fixing suitable size GI Box with modular plate & cover infront including providing 3 pin 5/6 A modularswitch /socketincluding connections etc. as reqd. Make:- Anchor/Indoasian/havells 0r equivalent |
| 130 | Providing and fixing of2 way AC Box with MCB mounting and connections etc as required.Make:- Anchor/ CG /havells |
| 131 | Supply & fixing testing & commissioning of 2 Ton Hot & cold ACInverter Series,3 Star including Copper pipe wherever required Make:- Voltasor equivalent |
| 132 | Supply & fixing testing & commissioning of wall mountedcopper stabilizerfor AC Make:- Voltas or equivalent |
| 133 | Supply & Installation of Exhaust Fans With Metal Exhaust 300 mm(12\") in the existing opening including connections,testing commissioning etc as requiredMake:- Anchor/ luminous/havells 0r equivalent |
| 134 | Providing & fixing of25mm X 5mm Copper strip on surface or in recess for connections etc as required\Make:- Anchor/Indoasian/havells 0r equivalent |
| 135 | Supplyinglaying & making outdoorand indoor connections including aluminium lugs etc and other jointing materials for 3.5X 95 sqmm LT Power Cable ,Almunium Conductor, ARMOURED Make:- Gloister//havells/CG |
| 136 | Earthing with copper earth plate 600mm X 600mm X 3mm thick including accessories and providing massonary enclosure with cover plate having locking arrangemets and watering pipe of 2.7 mtr long etc with Charcoal / coke salt as requiredMake:- Anchor/Indoasian/havells 0r equivalent |
