|
| 1 | BUILDING WORKS |
| 2 | Demolition of brickwork built in cement mortar including all quoins, arches, pillars etc, all as specified and directed. |
| 3 | Material and labour for brickwork withsub class \"B\" bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6, all as specified and directed. |
| 4 | Material and labour for brickwork withsub class \"B\" bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:4, all as specified and directed. |
| 5 | Taking down cement plaster of any description on brick or stone walls, etc including racking out joints, hacking for key, scrubbing down with water etc, all as specified. |
| 6 | Material and labour for 15 mm thick rendering on fair faces of brick or concrete surfaces in cement mortar 1:6, finished even and smooth without using extra cement, all as specified. |
| 7 | Material and labour for 15 mm thick rendering on fair faces of brick or concrete surfaces in cement mortar 1:4, finished even and smooth without using extra cement, all as specified. |
| 8 | Material and labour for preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of 3mm thick wall care putty, all as specified. |
| 9 | Material and labour for preparation of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of primer, all as spicified. |
| 10 | Material and labour for complete removal of existing treatment from the old plastered, pointed/concrete wall surfaces and applying two coats of oil bound distemper over a coat of 3mm thick wall care putty, all as specified and directed. |
| 11 | Material and labour for complete removal of existing treatment from the old plastered, pointed/concrete wall surfaces and applying two coats of cement base paint, all as specified. |
| 12 | Taking down chowkats or frames including shutter (without taking off shutters from the frame) areaexc.1.50 Sqm n.exc 4 Sqm each, Complete all as specified and directed by Engineer-in-charge. |
| 13 | Taking down chowkats or frames including shutter (without taking off shutters from the frame) area n exc. 1.5 Sqm each , Complete all as specified and directed by Engineer-in-charge. |
| 14 | Material and labour for plain 2nd class soft wood solid straight chowkhat and frame,wrought framed rebate on the solid,rounded or chamfered,put together with glue pinned at joints all as specified and directed by Engineer-in-charge |
| 15 | Material and labour for pressed steel frames 105 mm x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plates complete including one shop coat of red oxide primer, providing mild steel 6 mm dia thresh old bar, thickness of sheet 1.25mm and filling hollow of frame with plain cement concrete Type C-0, 1:3:6 (using 12.5 mm graded crushed stone aggregate) complete, all as specified. |
| 16 | Material and labour for pressed steel frames 125 mm x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plates complete including one shop coat of red oxide primer, providing mild steel 6 mm dia thresh old bar and filling hollow of frame with plain cement concrete Type C-0, 1:3:6 (using 12.5 mm graded crushed stone aggregate) complete, all as specified. |
| 17 | Plain framed factory made, panelled shutter 35mm thick (two panel) with lock rail and panel of 9 mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I) kiln seasoned and chemically pressure treated |
| 18 | Material and labour for 30 mm thick, 2nd class hard wood,glazed & skeleton factory made shutters, open rebated and prepared to receive glass, gauze etc. (without sash-bars), edges of framing plain, chamfered or rounded fitted with cut and metred beads for securing glass etc., sizes of members of shutters as specified in SSR Part-I, Section-8, clause 8.24(a) complete all as specified and as directed by Engineer-in-Charge. |
| 19 | Material and labour for painting to new wood or wood basedsurfaces of any description not otherwise described over 10 cm in width or girth including preparation of surfaces, priming with pink primer (one coat) finished with two coats of synthetic enamel paint complete all as specified and as directed by Engineer-in-Charge. |
| 20 | Supply and fixing 300 mm aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy, complete all as specified and directed by Engineer-in-charge. |
| 21 | Supply and fixing Aluminium anodised, barrel tower bolts of extruded section and fixed 150 mm long, Complete all as specified and directed by Engineer-in-charge. |
| 22 | Supply and fixing 150 mm long extruded aluminium handles, cast type, anodised, Complete all as specified and directed by Engineer-in-charge. |
| 23 | Material and labour for Box Type Steel windows with tubular frame side hung shutters including projecting type hinges with steel handle, 100mm long and steel peg stay, complete with glazing and gauged panel and guard bars, dovetailed or welded including one coat of red oxide zinc chrome primer & PCC 1:3:6 type C1 using 20mm graded crushed stone aggregate for embedding of holdfast, complete all as specified & directed by Engr-in-Charge with ref to Drawing No CEUZ/TD/1269/2008. |
| 24 | Material and labour for box type steel ventilators with bottom hung or top hung shutters with glazing/gauged pannels with guard bars, including hinges, steel side arms or peg stays and locking arrangements,complete all as specified & directed by Engr-in-Charge. |
| 25 | Material and labour for framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe-290, Gde-E-165, all as specified. |
| 26 | Preparation of new steel and iron surfaces of any description, over 10 cm in width or girth, not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engineer-in-charge. |
| 27 | Galvanized mild steel wire-cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples, complete all as specified and directed by Engineer-in-charge. |
| 28 | Supply and fixing 3 mm thick sheet glass,ordinary quality and glazing with oil putty in squares n exc 0.5 sqm in each pane, complete all as specified and directed by Engineer-in-charge. |
| 29 | Supply and fixing Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing, Complete all as specified and directed by Engineer-in-charge. |
| 30 | Supply and fixing factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing, Complete all as specified and directed by Engineer-in-charge. |
| 31 | Supply and fixing 100mm long aluminium handles, cast type, anodised, complete all as specified. |
| 32 | Supply and fixing 100 mm long aluminium anodised, barrel tower bolts of extruded section and fixed, all as specified. |
| 33 | Supply and fixing 125 mm long butt hinges, medium weight, cold rolled mild steel, and fixed, Complete all as specified and directed by Engineer-in-charge. |
| 34 | Dismantling floor, hearth or wall tiling including cement mortar bedding (including backing), removing serviceable tiles to store and rubbish off the premises, all as specified. |
| 35 | Material and labour for Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, laid over including screed bed or bedding layer of mortar 15 mm thick for laying floor tiles in CM 1:4, complete all as specified and directed by Engineer-in-charge. |
| 36 | Material and labour for coloured glazed ceramic tiles in vertical surfaces 300x600x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match, over & including 10 mm thick screed bed or bedding layer in cement mortar (1:4) to receive wall tiles, complete all as specified. |
| 37 | Demolition of stone slabs and tiles of any description or thickness in floors etc laid, bedded and pointed in any mortar, all as specified. |
| 38 | Material and labour for machine cut kota stone slab flooring 20-25mm thick as in flooring/skirting over & including 20 mm thick screed bed in cement mortar 1:4, laid and jointed with grey cement slurry mixed wiith pigment to match the shade of the slab including rubbing and polishing, complete all as specified. |
| 39 | Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets, fillets etc, complete all as specified. |
| 40 | Supply and fixing anodised aluminium snap grid frame work for false ceiling size of grid 605x605mm including hangers 6 mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long, all as specified. |
| 41 | Material and labour for 12mm thick gypsum board 12mm thick in ceiling fixed with screw as per manufacturers instructions including applying two coats of oil bound distemper including taking down complete all as specified. |
| 42 | Supply and fixingin repair Curtain rods 25 dia with PVC coating on hollow MS steel rods fancy type with brackets, corner & fancy types fineals complete all as specified and directed. |
| 43 | Taking up or down 15mm bore steel tubing and connections, including cleaning for refixing or removal to store, all as specified and directed. |
| 44 | Supply and fixing 15 mm bore galvanized steel tubes, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors, all as specified and directed. |
| 45 | Taking up or down 20mm bore steel tubing and connections, including cleaning for refixing or removal to store, all as specified and directed. |
| 46 | Supply and fixing20 mm bore galvanized steel tubes, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors,all as specified and directed. |
| 47 | Material and labour forlagging to 20mm dia pipes, all arround with 25mm thick bonded mineral wool pre-formed \"snap on\" pipe sections of density 144 Kg/cum confirming to IS 9842, all as specified and directed. |
| 48 | Supply and fixing in repair EWC vitreous China wash down water closet pan (pedestal pattern) white, including seat cover complete all as specified and directed. |
| 49 | Material and labour forvitreous china squatting pan, orrisa pattern, of size 580x440mm, white with integral foot rest with P or S trap including provision of cement concrete bedding (excluding flushing cistern and flush pipe) but including, making connections and demolition of concrete/lime concrete bedding for taking out existing broken squat pan, complete all as specified and directed by Engineer-in-charge. |
| 50 | Supply and fixing CP Jet Spray of Standard size for EWC alongwith CP connection and all fittings as fixed, Complete all as specified and directed by Engineer-in-Charge. |
| 51 | Supply and fixing in repair 10 ltr capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and connection to pipes and incl 32mm dia pipe for low level cistern flush pipe, Complete all as specified and directed by Engineer-in-charge. |
| 52 | Supply and fixing in repair, Vitreous china urinal half stall type white (excluding flushing cistern, flush pipe and waste pipe) including providing and fixing plugs, bedding urinal against wall in CM 1:2, securing urinal to plugs with and incl 60 mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe Complete all as specified and directed by Engineer-in-charge. |
| 53 | Supply and fixing Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) Complete all as specified and directed by Engineer-in-charge. |
| 54 | Supply and fixing in repairs for 15 mm bore dia pipe, bib taps, cast copper alloy chromium plated, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed by Engineer-in-charge. |
| 55 | Supply and fixing in repairs for 15 mm bore dia pipe, stop valves, cast copper alloy, screwed dowon, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed by Engineer-in-charge. |
| 56 | Supply and fixing in repair Vitreous China wash hand basin, white, flat back, size 550X400mm including cutting for and pinning in ends of brackets (including supply and fixing of brackets) or errecting stand, 32/40 mm brass chromium plated waste fitting with long screwed shank and fly nut flanged end bedded in red led cement, chain and plug and porcelain stopper complete all as specified and directed by Engineer-in-charge. |
| 57 | Supply and fixing in repair for 15 mm bore dia pipe pillar taps,cast copper alloy fancy type, with capstan heads, chromium plated, screwed down high pressure, with or without lettered \"Hot\" or \"Cold\" with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and directed by Engineer-in-charge. |
| 58 | Supply and fixing in repairbrass chromium plated overhead pressure adjustable shower with revolving joints with shower arms 125mm long heavy casted body with all fittings complete all as specified and directed by Engineer-in-charge. |
| 59 | Supply and fixing in repair 600mmx450mm bevelled edge mirror 5mm thick of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers Complete all as specified and directed by Engineer-in-charge. |
| 60 | Supply and fixing in repair brass chromium plated tubular towel rail 20 mm dia \"D\" type 60 cm long between flanges complete all as specified and directed by Engineer-in-charge. |
| 61 | Supply and fixing 32mmbore Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed. Complete all as specified and directed by Engineer-in-charge. |
| 62 | Supply and fixing 300mm size mild steel ordinary rat tail rod pattern springs including roller and roller plate, ISI marked complete all as specified and as directed by Engineer-in-Charge. |
| 63 | Supply and fixing in repairs 50mm bore (sand cast),Cast iron soil waste and vent pipes, in any length with or without ears with cement joints, fixed to wallsComplete all as specified and directed by Engineer-in-charge. |
| 64 | Supply and fixing in repairs 100mm bore (sand cast),Cast iron soil waste and vent pipes, in any length with or without ears with cement joints, laid in trenches or in floorComplete all as specified and directed by Engineer-in-charge. |
| 65 | Supply and fixing in repairs 100mm bore (sand cast),Cast iron soil waste and vent pipes, in any length with or without ears with cement joints, fixed to wallsComplete all as specified and directed by Engineer-in-charge. |
| 66 | Supply and fixing in repairs 75mm bore (sand cast),Cast iron soil waste and vent pipes, in any length with or without ears with cement joints, laid in trenches or in floorComplete all as specified and directed by Engineer-in-charge. |
| 67 | Supply and fixing in repairs 75mm bore (sand cast),Cast iron soil waste and vent pipes, in any length with or without ears with cement joints, fixed to wallsComplete all as specified and directed by Engineer-in-charge. |
| 68 | Supply and fixing 100mm cast iron sanitary connection-short connection pipes of length upto 300mm,Complete all as specified and directed by Engr-in-charge. |
| 69 | Supply and fixing cast iron branch pieces, double (equal or un equal), ordinary or inverted (spigot or socket) or with parallel branches for 100mm bore fitted with oval access doors, complete all as specified and directed by Engr-in-charge. |
| 70 | Supply and fixing cast iron branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches for 100mm bore fitted with oval access doors, complete all as specified and directed by Engr-in-charge. |
| 71 | Supply and fixing cast iron bends (any radius), diminishing pieces or tapers (larger bore measured) for 100mm bore fitted with oval access doors complete all as specified and directed by Engr-in-charge. |
| 72 | Supply and fixing cast iron bends (any radius), diminishing pieces or tapers (larger bore measured) for 75mm bore fitted with oval access doors, complete all as specified and directed by Engr-in-charge. |
| 73 | Supply and fixing cast iron bends (any radius) with duck\"s foot or heel rest 100mm bore dia, complete all as specified and directed by Engr-in-charge. |
| 74 | Supply and fixing cast iron bends (any radius) with duck\"s foot or heel rest 75mm bore dia, complete all as specified and directed by Engr-in-charge. |
| 75 | Material and labour forcast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) 75mm bore complete all as specified and directed by Engr-in-charge. |
| 76 | Supply and fixing cast iron cowls for 50mm bore pipe, complete all as specified and directed by Engr-in-charge. |
| 77 | Material and labour for extra over cast iron pipe and fittings if lead joints is provided in lieu of cement joint 100mm bore pipe, complete all as specified and directed by Engr-in-Charge. |
| 78 | Material and labour for extra over cast iron pipe and fittings if lead joints is provided in lieu of cement joint 75mm bore pipe complete all as specified and directed by Engr-in-Charge. |
| 79 | Supply and fixing in repairs grating doom 100mm dia of CP brass (minimum weight 25gms), complete all as specified and directed by Engr-in-Charge. |
| 80 | Supply and fixing in repairs 15mm size PVC connections with brass nuts of length 600mm, complete all as specified and directed by Engr-in-Charge. |
| 81 | Supply and fixing in repairs CP stop valve/angle valve of 15mm bore, cast copper alloy screwed pressure with crutch of butterfly handle, screwed both ends for iron pipe for unions and fixed, all as specified. |
| 82 | Supply and fixingrotational moulded polyethylene water storage tanks of 500 litre capacity(cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including hoisting, connecting including dismantling existing tank and removing to store, complete all as specified and directed by Engr-in-Charge. |
| 83 | Material and labour forball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed of 20mm. |
| 84 | Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering, and removal of debries from site. |
| 85 | Dismantling timber scantlings in unframed work 40sqcm and over in section, in any position, all as specified. |
| 86 | Supply and fixing pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. |
| 87 | Supply and fixing pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour as in ridges, having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified, complete all as specified. |
| 88 | Material and labour for MS work as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. Fe-410- W (Gde- E-250) quality-B, all as specified. |
| 89 | Supply and fixing plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment using Fe-410-W (Gde-E-250) quality A, complete all as specified. |
| 90 | Supply and fixing mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm but n exc 10cm long & diametre 16 to 20mm, all as specified. |
| 91 | Material and labour for cement concrete type B-0 1:2:4 (using 12.5mm graded aggregates), as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed |
| 92 | Demolition of cement concrete (unreinforced) in ground floor and in paving n exc 15 cm thickness (below or above ground level), complete all as specified. |
| 93 | Material and labour for 75mm thick PCC 1:3:6, type C-2 (using 40mm graded aggregates), as in plinth protection, finished the surface even and smooth without using extra cement, all as specified. |
| 94 | Material and labour for PCC 1:3:6, type C2 (using 40mm graded aggregate) as in mass concrete, pedestal etc, all as specified. |
| 95 | Taking down existing damaged IWC/EWC alongwith complete PCC and lime concrete from sunken floor and providing new IWC and water proofing treatment to sunken floor as per following stages :- (i) 15mm thick plastering in CM (1:2) with WPCall aroundand base of sunken floor with proper slope.(ii) Applying a coat of 85/25 grade hot bitumen @ 0.7Kg/Sqm over a coat of bituminous primer @0.5Kg/Sqm and then pasting of polythene film, 150 micron, matural colour with cold cut back adhessive.(iii) Fixing of 25mm dia GI pipe (medium grade) spout of length 45 cm. (iv) Filling sunken portion with PCC (1:4:8) type D2 using 40 mm graded aggregate after tesing of water tightness. . |
| 96 | INTERNAL ELECTRIFICATION |
| 97 | Taking down copper/aluminium point wiring (light,fan,socket & power) complet incl fixtures and fittings such as switches,ceiling rose,pendent holdes,regulators,sockets,light fitting etc and making good disturbed surface of wall,floor etc complete as specified and directed. |
| 98 | Material and labour for point wiring with 1.5 sq mmcopper conductor FRLS(multistrand) PVC insulatedISI marked unseathed cable 1100 volt grade in and including concealed/surface , non metalic rigid pvc medium grade ISI marked conduit not less than 19 mm with all fittings& other accessories and also includingPVC insulated ISI marked unseathed FRLS cable 1100 volts grade of size 1.5 sq mm copper conductor as earth wire to common earth dolly including concealed in wall/ceiling,modular MS boxwith modular cover plate with frame suitable for modular switches, sockets, fan regulatoretc for the following :- Note - Colour code of cable Phase-Red Neutral- Black and Earth -Green) |
| 99 | (a) One light/fan point controlled by one way switch 6 amps 240 volts |
| 100 | (b) one 3 pin 6 Amps switch socket out let point on independent board. |
| 101 | (c) one 3 pin 6 Amps switch socket out let point on same board. |
| 102 | Material and labour for point wiring with 2.5 sq mmcopper conductor FRLS(multistrand) PVC insulatedISI marked unseathed cable 1100 volt grade in and including concealed/surface , non metalic rigid pvc medium grade ISI marked conduit not less than 19 mm with all fittings& other accessories and also includingPVC insulated ISI marked unseathed FRLS cable 1100 volts grade of size 1.5 sq mm copper conductor as earth wire to common earth dolly including concealed in wall/ceiling,modular MS box with modular cover plate with frame suitable for modular switches, sockets 16 Amps, 240 volts:- Note - Colour code of cable Phase-Red Neutral- Black and Earth -Green). |
| 103 | Supply and fixing modular one way switch 6 Amp 240 volt marked light/fan suitable for one modeletc complete as specified and directed.Make- Legrand/ Anchor/ Havells or equivalent approved be GE. |
| 104 | Supply and fixing modular 6 Amp 5 pin universal socket suitable for two model , 250 volts complete all as specified and directed by Engr-in-charge MakeLegrand/ Anchor/ Havells or equivalent approved by GE. |
| 105 | Supply and fixing modular switch one way 16 Amps 240 volts suitable for one model complete as specified and directed by Engr-in-charge Make-Legrand/ Anchor/ Havells or equivalent approved by GE. |
| 106 | Supply and fixing modular 6/16 Amp socket suitable for two model , 250 volts complete all as specified and directed by Engr-in-charge MakeLegrand/ Anchor/ Havells or equivalent approved by GE. |
| 107 | Supply and fixing modular step type two model fan regulator suitable for 120 watt 250 volts complete as specified and directed by Engr-in-charge Make-Legrand/ Anchor/ Havells or equivalent approved by GE. |
| 108 | Material and labour for ceiling rose with three terminal as per relevant IS complete as specified and directed.Make SSK/havells/legrand /Anchor. |
| 109 | Supply and fixing decorative Self ballasted LED Batten With Extruded Thermoplastic body with PC diffuser fitting with>120º wide Distribution 20 watt luminaire all as specified & approved by EIC.Make:- CG C&S ,Havells ,Crompton equivalent approved by GE |
| 110 | Supply and fixing decorative Self ballasted LED Batten With Extruded Thermoplastic body with PC diffuser fitting with>120º wide Distribution 10 watt luminaire all as specified & approved by EIC.Make:- CG C&S ,Havells ,Crompton equivalent approved by GE. |
| 111 | Supply and fixing Energy saving new generation 10 W LED IP 65 bulkhead luminair with opal diffuser with 10 LED lamp etc complete as specified and directed by Engr-in-charge Make:- CG C&S, Havells, Crompton or equivalent approved by GE. |
| 112 | Supply and fixing epoxy powder coated or polystrene insulated material sheet metal enclosure factory made (double door)4 way TPN (VTP) suitable for MCCB DB\"s 415 Voltswith 200 Amps rated busbar, neutral & earthing link bar, flush/surface mounting complete all as specified anddirected. |
| 113 | Supply and fixing epoxy powder coated or polystrene insulated material sheet metal enclosure factory made (double door)12 way SPN suitable for MCB DB\"s 240 Voltswith 200 Amps rated busbar, neutral & earthing link bar, flush/surface mounting complete all as specified anddirected. |
| 114 | Supply and fixing MCBsingle pole and neutral ISI marked `C\" seriesworking on 240 volts 50HZ AC supply for incomming & out going controlling system of capaicty63 Amps 10 KA breaking capacity etc, complete all as specified and directed by Engr-in-Charge. |
| 115 | Supply and fixing MCBsingle pole ISI marked ISI Marked `C\" series working on 240 Volts 50 HZ AC supply for incomming and out goingcontrolling cercuit of capacity 6-32 Amp breaking capacity 10 KA etc, complete all as specified and directed by Engr-in-Charge. |
| 116 | Supply and fixing MCBsingle pole ISI marked ISI Marked `C\" series working on 240 Volts 50 HZ AC supply for incomming and out goingcontrolling cercuit of capacity 63 Amp breaking capacity 10 KA etc, complete all as specified and directed by Engr-in-Charge. |
| 117 | Material and labour for MCCB4 pole 125 Amps 16 KA working on 415 Volts 50 HZ AC supply, complete all as specified and directed by Engr-in-Charge. |
| 118 | Material and labour for sub main wiring with two single core, PVC insulated,ISI marked, unsheathed, 1100 volts grade multistranded copper conductor FRLS cable drawn into and including suitable size non metalic pvc conduit (ISI marked) concealed/surface with all accessories and including one single core pvc insulated multistranded unsheathed 1100 volts grade copper conductor FRLS cable as earth wire of the following size as in repair complete all as directed andspecified. |
| 119 | (a ) 2x4.0 sqmm + 1x4.0 sqmm earth wire |
| 120 | (a ) 2x6.0 sqmm + 1x6.0 sqmm earth wire |
| 121 | Disconnecting and taking down serviceable exhaust fan any type, size & any capacity with all accessories from existing place with outany damage and refixing the same after oiling, greasing and painting with one coat of synthetic enamelled paint after preperation of surface as per specified and making full serviceable incl replacement of 3 core pvc insulated copper conductor cable from ceiling rose to fan and writing the MES Noetc complete as specified and directed. |
| 122 | Supply and fixing in repair heavy duty exhuast fan 300mm, 900 rpm turbo force model single phase incl all accessories as per manufacturer norms and unserviceable fan deposited in MES store yard etc complete as specified and directed.Make -havells/usha/ketan. |
| 123 | Supply and fixingceiling Fan complete with electronic type regulator and accessories 230V, 1200mm sweep BEE 5 star rated. Make : Crompton Greaves/Usha/Bajaj. |
| 124 | Disconnecting, taking down ceiling fan from existing place and refxing the same after replacement of rubber bush, canopy,capacitor 2.5 ,mfd, clipincl greasing/oiling incl painting one coat of synthetic elament paint after preperation of surface as per specified incl replacement of unserviceable suitable size 3 core copper cable from ceiling rose to connector of fan etc and writing the MES No complete as specified and directed. |
| 125 | Supply and fixing in repair sheet metal enclosure single pole and neutral with 2 pin earth metal plug and socket with one single pole MCB 20 A, 230 volts etc complete as specified and directed. |
| 126 | ROAD/PATH/CULVERT |
| 127 | Demolition of cement concrete (unreinforced) in ground floor and in paving n exc 15 cm thickness (below or above ground level), complete all as specified and directed by Engr-in-Charge. |
| 128 | Material and labour for 75 mm PCC 1:4:8 type D-2 (40mm graded agg) as in sub base, complete all as specified and directed by Engr-in-Charge. |
| 129 | Material and labour for brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM(1:6), complete all as specified and directed by Engr-in-Charge. |
| 130 | Material and labour for machine pressed rubber moulded precast concrete interlocking paver blocks any shape and size of any pattern conforming to IS 15658-2006 of 60mm thickness, M-35 Grade with grey cement and pigments, complete all as specified and directed by Engr-in-Charge. |
| 131 | Material and labour for cement concrete type B-0 1:2:4 (using 12.5mm graded aggregates), as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, ,kerb,bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed by Engr-in-Charge. |
| 132 | SEWAGE DISPOSAL |
| 133 | Excavation in trenches not exceeding 1.5 metres wide and not exc 1.5 metres deepin soft/loose soil and getting out, complete all as specified and directed by Engr-in-Charge. |
| 134 | Supply and fixing 150mm internal diasalt glazed stoneware drain pipes laid in trenches and jointed specified including testing, complete all as specified and directed by Engr-in-Charge. |
| 135 | Material and labour for cement concrete 1:3:6 type C-2, as in concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 150mm bore of pipes, complete all as specified and directed by Engr-in-Charge. |
| 136 | Material and labour for PCC 1:4:8 type D-2 (using 40mm graded stone aggregate), as in foundations, filling and mass concrete, complete all as specified and directed by Engr-in-Charge. |
| 137 | Material and labour for brick work with sub class \"B\" Bricks (using old size bricks) straight or curved on plan exc 6m mean radius, built in CM 1:4, complete all as specified and as directed. |
| 138 | Material and labour for 15mm thick cement plaster in cement mortar 1:4 on fair faces of brick work finished even and smooth without using extra cement, complete all as specified and directed by Engr-in-Charge. |
| 139 | Supply only integral water proofing compound all as specified. |
| 140 | Material and labour for cement concrete type B1, 1:2:4 (using 20mm graded aggregate), in lintels upto 1.5 m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded for chamfered angles and throating, all as directed. |
| 141 | Material and labour for extra for forming fair finished drain or channel 15cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc. |
| 142 | Returning filling in soft/loose soil including spreading, leveling watering and well ramming in layers not exc 25 cm thick all as specified. |
| 143 | Removal of excavated soils from site to in difence land a distance exceeding 250 meters but n exc 500mand depositing where directed at a level not exceeding 1.5 meters anove the starting point, all as specified. |
| 144 | Material and labour for pre-cast reinforced cement concrete (1:2:4), type B-1 (using 20mm graded crushed stone aggregates), as in cover slab for man holes, set in CM (1:4) etc includimg necessary form work, complete all as specified. |
| 145 | Material and labour for steel TMT bars, 6 to 8 mm dia, cut to length, bent tp shape required including cranking, bending spirally for hooping for columnm, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified. |
