Construction Of Primary Health Centre At Tilsara, Charisharief By Way Of Executing Balance Items.- Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres for All kinds of soil 2 Providing and laying of stone soling 75mm nominal size in trenches hand packed all inclusive leads, lifts, loading, unloading, head load, ramming/dressing and carriage of materials from approved nearest sources to site of work complete. 3 P/L, in position cement concrete of specified grade including curing but excluding the cost of centering & shuttering. All work up to plinth level in 1:4:8 (1cement: 4 coarse, sand: 8 graded stone aggregate of 40 mm Nominal size 4 Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete, 50 mm thick with 20mm nominal size stone aggregate 5 Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in Cement mortar 1:6 ( 1 cement : 6 coarse sand) 6 Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level 7 12 mm thick plaster in 1:4 mix (1 cement : 4 fine sand) 8 Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level using 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) 9 Centering and shuttering including strutting, propping etc and removal of formwork for 10 Suspended floors, roofs, landings, balconies and access platforms 11 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level, Thermo-Mechanically Treated bars of grade Fe-500D or more 12 Dry Random Rubble Masonry with hard stone in foundationand plinth with bond stone 13 Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes channels, plates etc. including welding ,grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts completeincluding fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). 14 Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6mm, with 40mm dia, steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer 15 Providing and fixing 300x40 mm (nominal size plained eaves boarding of 2nd class Kail wood 16 P/F of 12 mm thick imported wood panelling for soffits/ceilings including underneath framework of budloo wood and scaffolding with two or more coats of paint over wood primer, complete job 17 P/F PVC pipes and fittings of Prince or other approved make (Type B) including cost of labour, cutting the walls/floor, laying to proper gradient and fixing in position, all carriages involved, complete job 18 75 mm dia pipe 19 75 mm door bend 20 75 mm Tee Bend 21 75 mm Plain Bend 22 75 mm Collar 23 100 mm dia Pipe 24 100 mm Door Bend 25 100 mm Plain bend 26 100 mm Collar 27 P/F GI Pipe fittings of approved quality like Surya or any other make (Type C) including all necessary fiitings/ fixtures and making walls good and even complete. All carriages involved, complete job 28 15 mm dia pipe 29 20 mm dia pipe 30 25 mm dia pipe 31 20 mm Ball valve 32 25 mm Ball valve 33 20 mm Tanky Nipple 34 25 mm Tanky Nipple 35 Providing & Fixing of CP fittings of approved make like Jacquar, Essel, Hindware, Cera etc including cost of fixing material. Labour, carriage etc, complete job (15 mm nominal bore/dia) 36 Angle Valve 37 PVC connection (18 to 24) 38 Steel cover tube type connection (18 to 24) 39 PVC waste pipe flexible 40 PVC urinal waste pipe 41 CP Soap Case 42 CP Grating 43 CP waste pipes 44 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour, 600 mm long towel rail with total length of 645 mm, 78 mm wide and effective height of 88 mm, weighing not less than 190 gms, complete job 45 Providing and fixing 15 mm nominal bore C.P. brass long body bib cock of approved quality like Jacquar, Hindware etc, all carriages involved, complete job 46 P/F of mirror of superior quality of size 600 mm x 450 mm including all fittings and carriage, complete job 47 Providing and fixing white vitreous china wash basin of size 550 mm x 440 mm with pedestal type (Cera, Hindware) including cutting and making good the walls with all carriages involved, complete job 48 Providing & Fixing of Stainless Steel Sink including fittings and brackets of size 450 mm x 600 mm, complete job 49 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I. clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required, One urinal basin with 5 liter white P.V.C automatic flushingcistern. 50 Providing, Installing and Testing of hot water Geyser, 50 Lts capacity of approved make like Venus, Racold etc including cost of all fittings and fixtures, complete job 51 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required with W.C. pan with ISI marked white solid plastic seat and lid. 52 Providing & fixing of Electric water lift pump, 02 HP of standard quality like Crompton Greaves, Havells etc including cost of all fittings and fixtures with carriage, complete job 53 Construction of Man Hole chamber in brick masonry in 1:6 mortar of size 750 mm x 750 mm x 600 mm deep with 12 mm thick plaster in 1:4 mix including and providing and fixing of PVC cover of required size, complete job 54 P/F of 450 mm x 450 mm PVC Man Hole covers including removal of old damaged ones, all fittings and fixtures involved, complete job 55 Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked of Sintex or like make, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank 56 Engagement of plumbers and helpers for making connections of PPR pipes with existing system as directed by the Engineer in charge of site 57 Plumber 58 Helper 59 Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth and curing complete 60 Providing and Fixing of 2.5 mm thick glass panes with necessary screws, nails, beedings etc, complete job 61 P/F of Chequerred precast cement concrete tiles 22mm thick in footpath and courtyard, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing, cleaning and curing complete, on 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 coarse sand), dark shade using ordinary cemnet 62 Carriage of materials from source to site of work including loading unloading complete. 63 Aggregates for an average lead of 30 Km 64 Sand for an average lead of 30 Km
