|
| 1 | PART-\"A\" FENCING WORK |
| 2 | Earth work in excavation in foundation trenches or drains including dressing of sides and ramming of bottoms, lift up to 1.5 Mtr. including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. All kinds of soil. |
| 3 | Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size). |
| 4 | Random Rubble stone masonry for foundation and plinth in Cement Sand mortar above 30CM thick wall in: Cement Mortar 1:6 ( 1-Cement : 6-Sand). |
| 5 | Centering and Shuttering with plywood or steel sheets including strutting, propping bracing both ways and removal of formwork for foundation in basements rafts, footings, straps beams, bases of columns etc. up to plinth level. |
| 6 | Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. M20 grade Nominal Mix (with graded stone aggregate 20mm nominal size). |
| 7 | Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor three level. Thermo-mechanically Treated bars (Conforming of relevent IS code) |
| 8 | Brick masonry in foundation and plinth with bricks of class designation 75 in : Cement mortar 1 : 4 (1 cement : 4 coarse sand) |
| 9 | Plaster on new surface on walls in cement sand mortar 1:4 including raking of joints etc. complete fine finish 20 mm thick |
| 10 | Providing and fixing steel gate, grating and grills made of angles, tees, square bars, flats,or black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide |
| 11 | Providing stone veneer facing in cement mortar 1:4 including cement pointing 1:3 in white cement with admixture of pigment matching the stone shade, upto one storey height above plinth level, in: Red Karauli sand stone rough dressed 25 to 35mm thick. |
| 12 | Extra over item No. 6.6.1 for fine grinded stone used instead of rough dressed. |
| 13 | Painting with enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work |
| 14 | Finishing wall with water proofing cement paint of approved brand and manufacture and or required shade to give an even shade including all scaffolding : New work (Three or more coats) |
| 15 | Supplying, hoisting and fixing in position overhead sign with a corrosion resistant 2mm thick aluminium alloy sheet with heigh intensity grade retro-reflective sheeting of encapsulated lens exclusive lettering, border and signs type with vertical and lateral clearance installed over a designed support system of aluminium alloy or galvonised steel trestles and trusses of sections and type as per structual design requirements and approved plans. As per MoRTH specifications : Clause 801 & 802. Truss and vertical support |
| 16 | Supplying, hoisting and fixing in position overhead sign with a corrosion resistant 2mm thick aluminium alloy sheet with heigh intensity grade retro-reflective sheeting of encapsulated lens exclusive lettering, border and signs type with vertical and lateral clearance installed over a designed support system of aluminium alloy or galvonised steel trestles and trusses of sections and type as per structual design requirements and approved plans. As per MoRTH specifications : Clause 801 & 802. Aluminium alloy plate fixed with heigh intensity grade sheeting. |
| 17 | PART-\"B\" RENOVATION AND REPAIR WORK TOURISM REST HOUSE |
| 18 | Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. M10 grade Nominal Mix (with graded stone aggregate 20mm nominal size). |
| 19 | Polished Blue Kota Stone flooring skirting, laid over 20mm thick base of C.M. 1:4 and jointed with grey cement slurry to match the shade of the slab including rubbing and polishing complete : For area of each slab from 2001 to 5000 Sq.Cm (a) 25mm thick slab. |
| 20 | Plaster on new surface on walls in cement sand mortar 1:4 including raking of joints etc. complete fine finish 20 mm thick |
| 21 | Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meter lead. |
| 22 | Applying Birla / JK white cement based putty over cement plaster surface for making even surface. |
| 23 | Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade : Two or more coats on new work including preparation of base with primer, putty, lippy complete in all respect. |
| 24 | Providing and fixing 1st quality standard white, grey, ivory, fume red brown, light green, light blue and other light shades glazed tiles confirming to IS : 13753 & IS :15622 of size 200mm x 300mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (excluding the cost of cement plaster on walls and pillar). |
| 25 | Providing and fixing 1st quality MAT finished ceremic tile size 300x300mm confirmingto IS : 13755 and IS : 15622 colour such as white, grey, ivory, fume red brown, light green, light blue and other light shades in floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (including the cost of cement mortar bed 1:4). |
| 26 | Providing and fixing factory made polyvinyl chloride (PVC) Door frame of the size 50x47mm with a wall thickness of 5mm made out of extruded 5mm, made out of extruded 5mm PVC foam sheet, mitre cut at two corners and jointing with 2 nos. of 150mm long brackets of 15x15mm M.S. Square tube. The two vertical door profiles are to be reinforced with 19x19mm M.S. square tube of 19gauge, EPDM rubber gasket weather seal to be providing through out the frame shall be fixed to the wall using 65/100mm long M.S. Screws through the frame by using PVC fasterners. A minimum of 4 nos. of screws to be provided for each vertical member and minimum 2 nos. for horizontal member etc. complete as per manufacture specifications and direction of Engineer- in-charge. |
| 27 | Providing and 30mm thick factory made Solid Panel PVC Door Shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and sizes of 19mm for styles & 15mm x 15mm for top and bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture M.S. frame shall be covered with 5mm thick heat moulded \"Rajshri\" PVC \"C\" Channel of size 30x50mm forming styles and 5mm thick, 75mm wide PVC sheets for top rail, lock rail and bottom rail on either side & 10mm (5mmx2) thick, 20mm wide cross sheets as gap insert for top rail & bottom rail. Panelling of 5mm thick PVC sheet to be fitted in the M.S. framewelded / sealed to the stiles & rail with 30mm wide x 5mm thick PVC sheet beading on either side the jointed together with solvent cement adhesive. An additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of the \"C\" Channel using PVC solvent cement adhesive etc. complete as per direction of Engineer-in-charge, manufacture\"s specification & drawing (For W.C. & Bathroom shutters).including all door fittings such as Hinges, L-drop, Handles, Locking bolts etc. as per approved of Engineer-in-charge |
| 28 | Providing and fixing external grade board solid core single leaf flush door shutters ISI 2202-67 marked using Phenol formal dehyderesin in glue both sides with approved steel fittings complete as per annexure \"A\" : 30 mm thickDecorative teak veneer both side |
| 29 | P & F Indian type white glazed vitreous china 1st quality W.C. orissa pan (IS :2556 Mark) with 100 mm vitreous china P or S trap including cutting and making good the wall and floor: Size 580x440mm. |
| 30 | P & F WVC wash basin (1st quality, I.S. : 2556 Mark) of approved make with C.I. brackets duly painted, 1 No. 15 mm C.P. Pillar cock (IS : 8934 Mark) & 32 mm C.P. brass waste coupling of approved make, 25 mm G.I. waste pipe complete including cutting & making good the wall.: Size 630 mm x 500 mm dia for counter top |
| 31 | P & F Grating of approved quality/make: Stainless Steel Sheet size 125mm dia. Heavy Quality of approved make |
| 32 | P & F G.I. pipes (Internal work) with G.I. fittings (IS:1239 Mark) & MS clamps including cutting and making good the walls and floors : Exposed on wall 15mm dia nominal bore |
| 33 | 25mm dia nominal bore |
| 34 | P & F GI pipes (External works) with GI fittings (IS:1239 Mark) including trenching & refilling earth etc. 15mm dia nominal bore |
| 35 | 25mm dia nominal bore |
| 36 | P & F Bib Cock (IS:8931 Mark) Superior quality of approved make : CP Brass bib cock, 15mm nominal bore. |
| 37 | P & F lst quality WVC Urinal (IS:2556 mark) with 25mm dia G.I. waste pipe, dome waste couplings, concealed iron brackets or screws etc complete. Flat Back (large) or half stall size 610x400x80mm. |
| 38 | P & F Flush Cock / Flush Valve (IS : 9758 Mark) For WC of approved quality make.concealed 25mm nominal bore. |
| 39 | P & F W.V.C. (IS: 2556 Mark) Squatting Urinal of standard make complete. Including cutting & making good the floor: Size 450x350mm |
| 40 | P & F PVC storage Tank (IS : 12701 marked indicating the BIS license No.), of approved make with cover, 25mm dia 1M long G.I. over flow pipe & 25 cm. long wash out pipe with plug & socket, including making connection etc. complete of approved design : 1000 litres capacity. |
| 41 | P & F rigid pvc pipe (IS:4985 mark) class II/ (4 kg./cm2) approved quality / make including joining the pipe with solvent cement rubber ring and lubricant 110mm dia |
| 42 | Painting with enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work |
| 43 | Providing batta (gola) 75mm x 75mm in cement concrete (1 : 2 : 4) including finishing with cement mortar 1 : 3 as per standard design. |
| 44 | Finishing with 25mm thick cement plaster on roofs in cement sand mortar 1 : 4 mix including water proofing compound @ 2% of cement used, with neat cement, finishing, curing etc. complete in all respect including making of 300 mm x 300 mm square. |
| 45 | Grading for roof water proofing treatment with : Cementconcrete1:2 :4(1cement:2coarsesand:4gradedstoneaggregate20mmnominalsize) with water proof compound as per manufacture\"s specification. |
| 46 | Brick masonry in foundation and plinth with bricks of class designation 75 in :Cement mortar 1 : 6 (1 cement : 6 coarse sand) |
| 47 | PART-\"C\" WATER HUT |
| 48 | Earth work in excavation in foundation trenches or drains including dressing of sides and ramming of bottoms, lift up to 1.5 Mtr. including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. All kinds of soil. |
| 49 | Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. M10 grade Nominal Mix (with graded stone aggregate 40 mm nominal size). |
| 50 | Anti-termite treatment of existing floor and wall using Imidacloprid 30.5% EC non repellent, odorless, low dose, environimentally safe Termiticide with rapid action non corrosive stain free manufactured by Bayer or equivalent company by injecting the emulsion as specified by the manufacturer and plugging with cement mortar 1:2 ( 1 cement : 2 coarse sand) in the whole floor area. The pesticide emulsion of imidacloprid 30.5% EC mixed with water in the ration of 1:474 will be pumped by a motorized spray pump specified manner. The net floor and wall area treated will be measured for payment. |
| 51 | Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. M25 grade Design Mix |
| 52 | Providing and laying cement concrete including curing, compaction etc. complete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets etc up to floor three level excluding the cost of centering and shuttering. M25 grade Design Mix |
| 53 | Centering and Shuttering with plywood or steel sheets including strutting, propping bracing both ways and removal of formwork for foundation in basements rafts, footings, straps beams, bases of columns etc. up to plinth level. |
| 54 | Centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with wooden members and removal of formwork for upto floor three level for : Suspended floors, roofs landings staircases, balconies, girders, cantilevers, bands, coping bed plates, anchor blocks, sills, chhajjas, lintel, beam etc. |
| 55 | Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor three level. Thermo-mechanically Treated bars (Conforming of relevent IS code) |
| 56 | Providing and fixing clamps of required size shape for anchoring stone wall lining (veneer) to the backing or securing adjacent stone in stone wall lining (veneer) in cement mortar 1:2 including making the necessary chases made of : Gun metal (casted). |
| 57 | Filling available excavated earth (excluding rock) in trenches, plinth side of foundation etc. in layers not exceeding 20 cm. in depth, consolidating each deposited layer by ramming and watering including lead up to 50 meter and with all lift. |
| 58 | Brick masonry in foundation and plinth with bricks of class designation 75 in : Cement mortar 1 : 6 (1 cement : 6 coarse sand) |
| 59 | Brick work in plain arches in super structure upto third storey in cement mortar 1 : 3 including centering and shuttering complete span upto 6 Mtr. with Brick of class designation 75. |
| 60 | 6 mm thick cement plaster to ceiling of mix1:3 (1cement : 3-fine sand) |
| 61 | Plaster on new surface on walls in cement sand mortar 1:4 including raking of joints etc. complete fine finish 20 mm thick |
| 62 | Providing stone veneer facing in cement mortar 1:4 including cement pointing 1:3 in white cement with admixture of pigment matching the stone shade, upto one storey height above plinth level, in: Red Karauli sand stone rough dressed 25 to 35mm thick. |
| 63 | Providing and fixingstone \"Pillars\" (Stambha) on pillers of Sabha Mandap/ Antral/ Praeshmandapa etc.fine dressed as per existing matching stone/ approved quarry with plain moulding work as per temple architecture complete with all scaffolding and shuttering work, all lead and lift in proper order and sequence etc.as per direction of Engineer Incharge. |
| 64 | Rough chisel dressed stone flooring over 20mm (Av.) thick base in CM 1:6 including pointing with cement mortar 1:2 (1 cement : 2 stone dust) with and admixture of pigment to match the shade of stone with joint thickness upto 15mm: 35mm thick red sand stone. |
| 65 | P & F Vitrified Porcelain Polished tiles ( Naveen/ Euro make , size 600 mm x 600 mm and thickness 10mm) on floor, skirting and steps etc. laid with tile admixture (Roff Pidilite or equivalent) including filling of joints by water proofing tile grout (Fevimate, Roofie, Untile or equivalent) specially for adhesive with graded granuals, polymer and stable pigment fine finished including cleaning of joints etc. complete as per direction of Engineer Incharge. Conforming to IS 15622 of approved make in all colour and shade, |
| 66 | Marble stone flooring table rubbed, 18 mm thick over 20mm (Av.) thick base of CM 1:4 (1 cement : 4 coarse sand) jointing with white cement mortar 1:2 (1 white cement : 2 marble dust) with pigment to match the shade of the marble slab including grinding, rubbing and polishing complete. Upto 800 Cm2 Tiles |
| 67 | Providing and fixing steel gate, grating and grills made of angles, tees, square bars, flats,or black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide |
| 68 | Painting with enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work |
| 69 | Distempering with dry distemper of approved brand and shade (two or more coats) and of required shade on new work, over and including, priming coat of whiting to given and even shade including all scaffolding. |
| 70 | Plumbing work |
| 71 | P & F Grating of approved quality/make: Stainless Steel Sheet size 125mm dia. Heavy Quality of approved make |
| 72 | P & F G.I. pipes (Internal work) with G.I. fittings (IS:1239 Mark) & MS clamps including cutting and making good the walls and floors : Exposed on wall 15mm dia nominal bore |
| 73 | 25mm dia nominal bore |
| 74 | P & F GI pipes (External works) with GI fittings (IS:1239 Mark) including trenching & refilling earth etc. 15mm dia nominal bore |
| 75 | 25mm dia nominal bore |
| 76 | P & F Bib Cock (IS:8931 Mark) Superior quality of approved make : CP Brass bib cock, 15mm nominal bore. |
| 77 | P & F PVC storage Tank (IS : 12701 marked indicating the BIS license No.), of approved make with cover, 25mm dia 1M long G.I. over flow pipe & 25 cm. long wash out pipe with plug & socket, including making connection etc. complete of approved design : 1000 litres capacity. |
| 78 | P & F rigid pvc pipe (IS:4985 mark) class II/ (4 kg./cm2) approved quality / make including joining the pipe with solvent cement rubber ring and lubricant 110mm dia |
| 79 | Construction of Tube-well upto 100 Meter depth and above in all type of rocks by DTH system and over burden, to accommodate casing pipe of following sizes in all types of soils and over burden including lowering of casing pipes, but excluding cost of casingpipes as per IS : 2800 (Part I & II) 1979 specifications. The work would be completed after obtaining sand free water. The tube well should have a throughout bore as per nominal dia of casing pipe: 100 mm dia Nominal bore. |
| 80 | Supply of ERW M.S. black casing pipe ISI marked (IS:4270/1992) of grade Fe410 of following sizes at site of work. 150mm |
| 81 | 2 Nos. of water hut |
