|
| 1 | Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings.Complete all as specified and as directed by Engineer-in-charge. |
| 2 | S&Fpre-painted galvalumealuminium zink coatingGIbased corrugatedsteel sheet0.50 mmthick of an colour havingtensilestenghtof 550 MPAas in roof covering /cladding to wall, fixed with self tappingscrews .Complete all as specified and as directed by Engineer-in-charge. |
| 3 | Dismanting timber scantling under 40 Sqcmin secionIn fillests, rails , posts, refters and purlins etc in any position inframed work or unframed work.Complete all as specified and as directed by Engineer-in-charge. |
| 4 | M&L 2nd CL HW plain fillets square, rectangular in section clean sawnn sectional area exe 13 sqcm & n.exe 25 sqcm fixed with nails including one coat of black oil.Complete all as specified and as directed by Engineer-in-charge. |
| 5 | Taking down chowkats or frames not exc 1.5sqm each with shutters( without taking off shutters from the frame ) including dismantling of df bed blocks for hold fasts. |
| 6 | Taking down chowkats or frames exc 1.5sqm and not exc 4.0 sqm each with shutters ( without taking off shutters from the frame ) including dismantling of PCC bed blocks for hold fasts. |
| 7 | Taking down of shuttersof any description exc 1.00 Sqm and n.exc 2.00 sqm each |
| 8 | Supplied and fixed factory made Pressed steel frames of size 125 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc.Complete all as specified and as directed by Engineer-in-charge. |
| 9 | Supplied and fixed factory made Pressed steel frames of size 105 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc.Complete all as specified and as directed by Engineer-in-charge. |
| 10 | Material and labour for providing Plain Cement Concrete (1:3:6) type C1 using 20mm graded aggregate as in bed block or hold fast and filling of chowkhat.All as specified and directed. |
| 11 | Supply and fix, 30 mm thick, flush shutters, solid core construction, with particle board core andply wood face panels commercial type on both sides all as specified and directed |
| 12 | Supply and fix 30mm thicksecond class hard wood glazed and skeleton, open rebated and prepared to receive glass/ wire cloth, gauze exc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc.The sizes of members of shutters as per IS-1003 (Part-2), kiln seasonable and chemically pressure treated and fitted to chowkhats complete all as specified and directed. (Note : Glass / wire cloth wil be measured and paid separately). |
| 13 | S&F solid PVC door frame of size 50mm X 47mm, made out of 5mm plain colour PVC sheet reinfoced with M.S. square tube, supply and fixing in opening as per specification. |
| 14 | S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top and bottom rails,M.S. frame shall be covered with heat moulded plain colour PVC \"C\" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail,lock rail& bottom rail on either side & as gap insert for top rail & bottom rail,panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading , and joined together with solvent cement,supply and fixing at site as per specifications. |
| 15 | Taking down existing aluminium shutter of area exc 1.0 Sqm but not exc 2.00 Sqm and refixing the same in the same openingafter reparing and make functional including replacement of fitting and fixture for proper functioning as required all as specified and as directed. |
| 16 | S&F Anodised aluminium frame (three track/two rack) for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. Complete all as specified and as directed by Engineer-in-charge. |
| 17 | S&F Anodised aluminium door, window and ventilator shutters, sliding type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws,4mm plain glass/ 4 mm thick frosted glass as required and stainless steel wirmesh 0.36mm nominal dia of wire and average width of aperture 1.40mmetcComplete all as specified and as directed by Engineer-in-charge. |
| 18 | S&F 100mm size type B-21 Butt hinges extruded aluminium alloy with galvanised MS sheet hinges pin anodised.Complete all as specified and as directed by Engineer-in-charge. |
| 19 | S&F 75mm size type C-21 Butt hinges extruded aluminium alloy with galvanised MS sheet hinges pin anodised.Complete all as specified and as directed by Engineer-in-charge. |
| 20 | S&F extruded aluminium alloy handels fabricated type, anodised, 150mm long.Complete all as specified and as directed by Engineer-in-charge. |
| 21 | S&F extruded aluminium alloy handels fabricated type, anodised, 100mm long.Complete all as specified and as directed by Engineer-in-charge. |
| 22 | S&F Aluminium anodised sliding door bolts of size 300mm long, with hasp & staple ( bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extreded sections or cast aluminium alloy.Complete all as specified and as directed by Engineer-in-charge. |
| 23 | S&F Aluminium anodised barrel tower bolts of extruded section 200 mm long and fixed with screws. |
| 24 | S&F Aluminium anodised barrel tower bolts of extruded section 150 mm long and fixed with screws. |
| 25 | S&F Stainless steel wire cloth.0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed withstainless steel wire staples |
| 26 | S&F in repairs Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples |
| 27 | Demolition of cement concrete (un-reinforced) in ground floors and paving not exceeding 15cm thick above or below ground level all as directed. |
| 28 | M&L 75 mm thick PCC 1: 3:6 type C2 using 20mm graded agg finishing even and smooth using extra cement as in plinth protections/path and laid fair in alternate bays n including filler joints with sealing compound grade \"A\" complete all as specifed and as directed. |
| 29 | Demolition of reinforced cement conc of any description and in any position |
| 30 | M&Lfor RCC type B11:2:4 (20 mm graded agg)as slab supported on wall , beams columns in floor, roofs landing and the like |
| 31 | S&F mild steel TMT bar 8 to 10mm dia and over cut to length ben to shape reqd etc complete |
| 32 | Use & Waste of Fromwork to sides and soffits of floor or roof slab, girders ,lintels shevles inclusidng support and hangs |
| 33 | Demolition of brick work/stone masonry, built in cement mortar including all quoins, arches, pillars etc butexcluding ashlars facings, dressed stone work and pre-cast concrete articles all as directed. |
| 34 | Material and labour for old size burnt clay sub class B bricks, straight or curved on plan exc 6 m mean radius built in cement mortar ( 1:6) having compressive strenght notless than 75 kg/Sq cm all as specified and directed. |
| 35 | Material and labour forold size burnt clay sub class B bricks, straight or curved on plan exc 6 m mean radius built in cement mortar ( 1:6) having compressive strenght notless than 75 kg/Sq cm all as specified and directed. |
| 36 | Dismantling wrought iron or mild steel work or any description as in door, gates, etc and similar works complete all as directed |
| 37 | Supply and fixmild steelguard bars to window frame with necessary drilling holes etc including taking out old guard bars from old chowkats all as specified and directed. |
| 38 | Taking down cement plaster, of any description on brick or stone walls, etc including racking out joints, hacking for key, scrubbing down with water all as directed. |
| 39 | Material and labour for 15 mm thick rendering in cement mortar (1:4) on fair face of brick or concrete surface finished even and fair without using extra cement .Complete all as specified and as directed by Engineer-in-charge. |
| 40 | Material and labour for 10 mm thick rendering in cement mortar (1:6) on fair face of brick or concrete surface finished even and fair without using extra cement.Complete all as specified and as directed by Engineer-in-charge. |
| 41 | M&L for 5 mm thick rendering in cement mortar 1:3 on concrete surfaces as on ceiling and finished fair and even without using extra cement. complete all as specified and directed. |
| 42 | Supply only integral water proofing compound all as specified.. |
| 43 | Material and labour for applying three coats of white wash on walls including preparation of new or previously untreated surfaces all as specified and directed. |
| 44 | M&LApplying two coats of Oil bound distemper to newly plastered/previously untreated wall over a coat of 1 mm layer wall care putty over a coat of primer including preparation of newly platsered wallall as specefied and directed. |
| 45 | M&L preparation of newely plaseter surfaces andappplying two coats of weather coat(Apex) over two primer coats of damp shealth tonew plastered walls as per manufacturer and apllied by approved applicatorcomplete all as specified and directed. |
| 46 | M&L complete removal of existing treatment and appplying two coats of weather coat(Apex) over two primer coats of damp shealth toold plastered walls as per manufacturer instrcution including properly fillings the cracksand apllied by approved applicatorcomplete all as specified and directed. |
| 47 | M&L for preparation of new plastered or unplastered surfaces of ceiling and applying three coats of white wash as in ceiling complete all as specified and directed. |
| 48 | M&LApplying two coats of Oil bound distemper to wall over a coat of 1 mm layer wall care putty over a coat of primer including complete removal of existing treatment all as specefied and directed. |
| 49 | M&L for one coat of white wash on old wall surfaces of walls and cornicesincluding preparation of old plastered or un plastered of surafce of wall by brooming down or steel wire brushing ,srcaping down smoke soot ,moulds ,moss and efflorescent salts and trading oil and greasy spot all as specified and directed |
| 50 | Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing, removing rubbish off the complete all as specified and directed. |
| 51 | M&L Non - skid coloured Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bedin CM 1:6.Complete all as specified and as directed by Engineer-in-charge. |
| 52 | M&L Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:6.Complete all as specified and as directed by Engineer-in-charge. |
| 53 | M&L Coloured Glazed ceramic tiles 450 x 300 mm x 6 to 7mm thick, in skirting /dado etc set and jointed in neat cement slurry and pointed in white or coloured cement to matchover 10mm screeding in Cement mortar 1:4. . |
| 54 | M/L Granite (of any type) tiles 18-20 mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stoneincluding grinding, polishing and moulding of edges and corner. completeover 15mm thick screed bed in CM 1:4 over cooking platform.Complete all as specified and as directed by Engineer-in-charge. |
| 55 | M&L 18 to 20 mm thick Granite (of any type) tiles machine cut, in skirting/ dado laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding, polishing and moulding of edges and corner. completeover 10mm thick rendering in CM 1:4.Complete all as specified and as directed by Engineer-in-charge. |
| 56 | M&L for Machine cut kota stone slab flooring 20-25mm thick over 20mm thk cement screed base in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing.Complete all as specified and as directed by Engineer-in-charge. |
| 57 | M&L for Machine cut kota stone slab 20-25mm thick in riser of steps, skirting, dado over 10mm thk cement screed base in CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing .Complete all as specified and as directed by Engineer-in-charge. |
| 58 | Taking up or down 15 mm bore old steel tubing and connections, including disconnection of fittings from tubing including cleaning for re-fixing or removal from site complete all as specified and directed. |
| 59 | All as per item No 58 here in before but 20 mm bore. |
| 60 | S&F of 15 mm bore tubes medium grade galvanised with and incl all GI fitting (such as bends, elbows, Tees, connectors, short pieces,back nuts, unions, caps and plug etc ) and fixed complete to wall and ceilingor laid in/on floor complete all as specified and directed, |
| 61 | All as per item No 60 here in before but 20 mm bore. |
| 62 | Supply only 15 mm bore pillar tap,fancy type cast copper alloy, with capstan head, chromium plated, screwed down high pressure, with or without letter Hot or Cold with long screwed shanuls and fly nuts, screwed for iron pipe or for brass ferrule all as specified and directed. |
| 63 | Supply and fix,as in repair, 15 mm bore bib taps, cast copper alloy,cromium plated, fancy type, with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule all as specified and directed. |
| 64 | Supply and fix,as in repair, 15 mm bore medi series florentine bib cock with extended lever handle, cast copper alloy,cromium plated, fancy type, , screwed down, screwed for iron pipe or for brass ferrule all as specified and directed. Product code: FLR-CHR-5043N (Jaguar) |
| 65 | Supply and fix, as in repair, stop valve/angle cock, cast copper alloy, fancy type, chromium plated with long shank and cup (concealed type) screwed down high pressure, with crutch or butterfly handles for 15 mm bore pipe or for unions all as specified and directed. |
| 66 | S&F waste coupling CP 32 mm dia for glazed ware basins etc with fly nuts flanged etc complete all as specified and directed. |
| 67 | S&F CP 40mmdia waste coupling for stainless steel sink with inlet and out let screwed for pipe or connections including packing, union and cap etc complete all as specified and directed. |
| 68 | S&F 32 mm dia PTMT 610 mm long waste pipe suitable for WHBcomplete all as specified and directed. |
| 69 | S&F 40 mm dia PVC 610 mm long waste pipe suitable for Sinkcomplete all as specified and directed. |
| 70 | Material and labour, as in repair for 75 mm dia of outlet PVC(SWR)floor trap, plain with granting including jointing with solvent cement all as specified and directed |
| 71 | Supply & Fix as in repair 20 mm dia CP curtain rod (colour coated) with two Nos of socket (decorative type) complete for doors/window opening all as specified and directed |
| 72 | Taking down existing damaged water closet alongwith complete PCC and lime concrete from sunken floor and providing new EWC / IWC and water proofing treatment to sunken floor as per following stage :- (i) 15mm thick plastering in CM (1:2) with WPC at all around and base of sunken floor with proper slope. (ii) Applying a coat of 85/25 gde hot bitumen @ 0.7Kg/Sqm over a coat of bituminous primer @0.5Kg/Sqm and then pasteing of polythene film, 150 micron, natural colour with cold cut back adhessive.(iii) Providing lime concrete and cement concrete to fill up the sunken floor (PCC 1:4:8) after testing of water tightness. |
| 73 | Material and labour for preparation of new and previously un-treated wood and wood base surfaces of any description, not otherwise described over 10cmwidth or girth and applying two coats of synthetic enamel paint over one coat of pink primer all as specified and directed. |
| 74 | Material and labour for preparation of new and previously un-treated steel surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer all as specified and directed. |
| 75 | M&L for applying for preparation of old painted surfaces of wood and woodbasesurfaces of any description , not otherwise described over 10 cm width or girth and applying one coat ofsynthetic enamel paint all as specefied and directed. |
| 76 | M&L for applying for preparation of old painted surfaces of old painted steel surfaces and iron surfaces of any description ,over 10cm width or girth incl and applying one coat ofsynthetic enamel paint all as specefied and directed. |
| 77 | Supply and fix, as in repairs, sheet glass self assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with cromium plated bracket guard and railing 60cm long all as specified and directed. |
| 78 | Supply and fix, as in repairs, vitreous china squatting pan of Orrisa pattern size 580mm x 440 mm, white, with integral foot rests (excluding flushing cistern and flush pipe) including connection making good to floor all as specified and directed. |
| 79 | Supply and fix, as in repair,vitreous china wash basin, white,flat back size 580 x 450 mm, excluding taps, waste chain, plug and porcelain stopper but including brackets, cutting for and pinning in ends of bracket or erecting stand complete all as specified and directed. |
| 80 | Supply and fix, as in repair, 10 ltrs capacity PVC valve less syphonic action type, low level flushing cistern, white, with inlet, ball valve float and handle including brackets & flush pipe of polyethylene of low or high density or PVC 32 mm dia complete all as specified and directed. |
| 81 | Supply and fix as in repair, 600 mm x 450 mm beveled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commerical plywood and fixed to wooden plugs with chromium plated brass screws and cup washers all as specified and directed. |
| 82 | Supply and fix, as in repair, sinks with drainage board made out of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortor to dwarf wall or including fixing cantiriver lever brackets and connecting union to pipe overall size 915mmX460mm and bowl size 410mmX330mmX160mm all as specified and directed. Make - Nirali /Anjali/Prayag. |
| 83 | Supply and fix,as in repair,15 mm dia 600 mm long connection pipe with two PVC PTMT nuts at each ends with rubber washer complete all as specified and directed. |
| 84 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) |
| 85 | Supply and fix, 110mm bore PVC (SWR)pipe single socketed with rubber ring joints fixed to walls all as specified and directed. |
| 86 | All as per item No 85 here-in-before but 75 mm bore. |
| 87 | Supply and fix, PVC (SWR) bends/tee (any radius) for 110 mm bore PVC pipesall as specified and directed. |
| 88 | All as per item No 87 here in before but75 mm bore. |
| 89 | Supply and fix, PVC cowls 110 mm bore all as specified and directed. |
| 90 | Demolition of old damaged existing water proofing compound on RCC roof of any description and specification andcleaning the surface thoroughly including taking down of water tank of any capacity with connections etc and refixing the same in position including replacement of any damaged items.All as specified and directed |
| 91 | M & L 15mm thick in cement mortar (1:4) on existing roof surface true to level after applying cement slurry @3Kg/Sqm and appliedcoat of bituminious primer of graded 85/25 @1.2 Kg/Sqm .Complete all as specified and as directed by Engineer-in-charge. |
| 92 | Supply and laying 3mm thick APP based Polymeric membrane of approved manufacture with weight not less than 3.60 Kg per Sqm reinforced with non-woven polyster febric weight not less than 150gms per Sqm.The overlap shall be not less than 100mm on transverse direction and 75mm on longitudinal direction and sealing overlaps and Applying evenly one coat of aluminium paint @ 0.10 liter per square metre over the APP based polymeric membrane complete all as specified and as directed. |
| 93 | M&L Roof tiles, Mangalore pattern, interlocking at side joints, laid dry.Complete all as specified and as directed by Engineer-in-charge. |
| 94 | S&F in repairof pre-laminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work thickness of 12 mm complete all as specified and directed. |
| 95 | Material & Labour in repairs 19/20 mm thick Block boards, grade 2 quality, interior grade, laminated sheet with decorative face, veneer on one face, commercial type fixed with screws to timber frame work complete all as specified and directed. |
| 96 | Supply and fix, as in repair, Overhead Shower 125 mm dia Round Shape Single Flow (Brass Chromium Plated) with Rubit Cleaning Syste, including fixing to steel pipe or union of 15mm bore all as specified and direcetd. |
| 97 | Supply & Fix as in repairs Kitchen plate rack made of stainless steel sheet 1mm thick of overall size 900mm X 850mm X 250mm with three shelf complete all as specified and directed. Make :-Bluestar/prayag/Nirali |
| 98 | Supply & Fixin repairs floor door stopper of brass body and tongues with hard drawn steel spring, overall length cover plate 150mm complete all as specified and directed |
| 99 | S&F 300mm ordinary mild steel ordinary type springs including roller and roller plate Complete all as specified and as directed by Engineer-in-charge. |
| 100 | S&F 100 mm Hasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screwscomplete all as specified and directed. |
| 101 | S&F in repairLiquid soap container of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 105gms) complete all as specified and directed. |
| 102 | S&F in repairs bathroom mirror cabinet size of 450 x 350 mm with all necessary fittings complete all as specified and directed. Make- Prayag(Cat no.557) |
| 103 | S&F in repairCP Towel Ring fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms) complete all as specified and directed. |
| 104 | S&F in repairbrass choromium platedtowel rail 600 mm long complete all as specified and directed. |
| 105 | S & F In repairs Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty all as specififed and directed |
| 106 | DismantlingWall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets all as directed. |
| 107 | S&Ffalse ceiling with powder coated exposed G.I. grid suspension system Everest E-Grid T-2430 or equivalent load carrying capacity with mid span deflection not exceeding 1/360 span with hanger spacing of 1200 mm c/c) consisting of Main Runner (3600 mm long, 0.25 mm thick, 38mm height) Cross Tee (1200mm/600mm long, 0.25 mm thick, 27 mm height) and Wall Angle (3000 mm long, 0.4 mm thick, 22 mm height). The Wall Angle shall be fixed on PVC Dash Fasteners on the perimeter of the wall by steel screws with distance 300 mm c/c. The Main Runners to be placed @ 1200mm, The Cross Tee 1200mm will be inserted in the pre-cut slots of Main Runner at a regular interval of 600 mm to form a modular grid of 1200mm x 600mm. Additional Cross Tees of 600 mm shall be placed perpendicular to the Cross Tee 1200 mm long to finally form a grid of 600mm x 600mm. Grid of module size 600mm x 600mm shall be supported by 6 mm dia G.I. wire from purlins/soffit. 4 mm thick High Pressure Steam Cured Everest Non Asbestos Fibre Cement Designer Ceiling Board or equivalent quality having Density>1200 Kg/m3, size 595mm x 595mm, confirming IS 14862 & Type B Category III of ISO 8336, tested as per AS-1530 part 3 & BS-476 Part 4,5,6,7&8, should be placed in the Grid module to form a False Ceiling. |
| 108 | S& F in repairs of 4mm thick E Board decorative type in false in any type of frame work all as sepcified and drected |
| 109 | M&L for Auto glass sensor door operator(SS channel length as required as per site requirement, DC brushless motor, SMPS Power supply 130-1300V AC wide input, Micro controller , Belt ,Stopper and other accessories, Foot sensorx 1pc + Exit switch x 1 no. , Glass door hanging clamps x 4 nos etc with photo beam sensor (to avoid collision) 4 eyes / 2 pair / 1 set with sealed door of aluminium frame, injected with poly foam covered with stainless steel sheet # 304 grade all as directed by Engr in charge. |
| 110 | Taking down carefully unserviceable point wiring (light,fans,socket etc) complete and making good disturbed surface of wall/floor etc complete all as specified. |
| 111 | Taking down DB/main switch of any size and making good disturbed surface of wall/floor complete all as specified. |
| 112 | Taking down sub main wiring of any size complete and making good disturbed surface of walls/floors etc complete as specified. |
| 113 | Taking down fans sealing cable ends dismantling blades and removing fan, greasing and servicing and painting of fan any sweep with applying one coat of synthetic enamel paint (Ceiling Fan -White Paint and Exhaust fan - GrayPaint ) by spray machine including preparation of old painted surfaces with filling of cavity by filler with and including writting of MES No. of fan in capital letters with black synthetic enamel paint of height not less than 20mm on fan body in approved pattern snd refixing the same complete all as specified and directed. |
| 114 | M & L for concealed point wiring for one light with 1.5 sqmm cable PVC insulated copper conductor multi stranded as per IS-694 FRLS cable controlled by one way switch, drawn through rigid non metallic concealed conduit with all accessories incl 1.5 sqmm multi strand copper conductor cable (green colour) PVC insulated andunsheathed for earth continuity connected to common earth dolly and sunken cast pressed steel terminal box fixed flush to wallof not less than 1.6 mm thick for mounting of fittings such as switch, socket and speed regulator with 3 mm thick Laminated bakelite sheet (Hylem\") cover of approved colour for fixing switches all as specified and directed. |
| 115 | All as per Ser item No.114 above but for one fan point |
| 116 | All as per Ser item No.114 above but for one bell point |
| 117 | All as per Ser item No.114 above but for 5 amps socketon same board with other switches |
| 118 | All as per Ser item No.114 above but for 5 amps socket on independent board. |
| 119 | All as per Ser item No.114 above but with 2.5 sqmm cables for 15 amps switch socket combination outlet on independent board complete all as specified and directed. |
| 120 | All as per item No 114 above but for One light point controlled by two 2 - wayswitches , with cables 1.5 sq. mm size |
| 121 | M & Lfor point wiring for one light /fan point with 1.5 sqmm cable PVC insulated copper conductor multi stranded as per IS-694 FRLS cable controlled by one way switch, drawn through PVC casing capping with all accessories incl PVC sunken boxes of approved size for fixing switches, sockets etc and 1.5 sqmm multi strand copper conductor cable (green colour) PVC insulated andunsheathed for earth continuity complete all as specified and directed. |
| 122 | Supply and fix switch 5 amps switch flush type one way single polecomplete all as specified and directed. |
| 123 | M&L for Bell, AC, 230 volts, single pole complete all as specified and directed |
| 124 | M&L Bell push, flush type, 5 amp complete all as specified and directed |
| 125 | Supply and fix switch socket combination outlet flush type, 5 Pin, 5 amps. |
| 126 | Supply and fix Socket outlet 2 in 1, 5 Pin, 5/6 Amps |
| 127 | Supply and fix switch socket combination outlet universal type 5 pin 5/16 amps |
| 128 | Supply and fix ceiling rose surface backelite 65x50 mm having 3 terminals. |
| 129 | S & F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. as reqd. all as specified and directed |
| 130 | S & F 2 Way switch, 5A complete all as specified and directed. |
| 131 | Supply and fix Circuit/Sub Main Wiring with 2x4.0 Sqmm PVC insulated, FRLS, copper cable 1100 volts grade stranded copper conductor cable drawn through concealed conduit with all fittings and accessories including 2.5 Sqmm stranded PVC unsheathed copper cable for earth continuity connected to common earth dolly. |
| 132 | Supply and Fixing wall mounted LED batten, polycarbonate housing & integrated electronic driver. LED light fittings flicker free, instant start with uniform light distribution 10 W/9W2 ft indoor decorative with 2 Core copper wire from ceiling rose to light fitting complete all as directed. Make Havells/Philips/Havells/CG |
| 133 | Supply and Fixing wall mounted LED batten, polycarbonate housing & integrated electronic driver. LED light fittings flicker free, instant start with uniform light distribution 20W / 18W, 4 ft indoor decorative with 2 Core copper wire from ceiling rose to light fitting complete all as directed. Make-Havells/Philips/Havells/CG |
| 134 | Supply, fixing, installation and commissioning ofSurface/Ceiling mounted LED Shadowless light fitting, Intensity 1,30,000 + 1,30,000 Lux, Spool dia meter 100-150 m, Depth illumination 10-15 cm, Colour temp 4300-5200 K, Colour rendering Index 95 Ra, Focusing-Adjustable, Number of LED 48+48 with HD lense, Diameter of light 650 mm, Power consumption- 50+50 watts, Special function - remote operated, with Battery backup of not less than one and half an hour. Make: Philips/Siemens/Steris India |
| 135 | S & F MCB DB Single pole and neutral 8 waydouble door with 200 amps rated bus bar complete concealed in wall all as directed. |
| 136 | S & F MCCB 4 Pole 415V Fixed type 25-100A with breaking capicity 16 KA complete all as specified and directed. Make : &T/Standard/Havells |
| 137 | S & FTP&N Vertical double door Loadline DBs are fitted with Bus Bars, Neutral Links, Blanking Plates (without MCCB), concealed in wall, complete all as specified and directed. Make-Havells/ L&T/C&S/legrand/hager. |
| 138 | S&F MCB SPN 32 Amp, \"B\" Series, 10KA braking capacity230/240 volt ACas specified and directed. Make: Havells/Legrand/L&T/Merlin Gerin/Standard |
| 139 | S & F MCB SP 40 Amps 240 volts having\"C\" Series complete. Make: Havells/Legrand/L&T/Merlin Gerin/Standard |
| 140 | S & F MCB SP 6 to 32 Amps 240 volts having\"B\" Series complete. Make: Havells/Legrand/L&T/Merlin Gerin/Standard |
| 141 | Supply and fix Energy saving and environmental friendly long life LED street light 35 Watt made up of pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover having IP65 protection and Impact resistance of IK07 with 10KV Built-in Surge Protection Device including GI Pipe 40 mm dia bracket 1.2 mtr in length bent to shape of 120 degree with MS bracket 2 Nos, washers, nuts, bolts etc. |
| 142 | Taking down Water heater storage type 25 ltrs with all connecting accessories and refixing the same and making good disturbed surface area complete all as directed |
| 143 | M/Lfor Earthing complete with galvanized steel earth plate electrode 60 x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5 meter below normal ground level connected to GI earth lead wire 4 mm dia by means of bolts nuts, check nut and washers of GIand GI tubing 15mm bore, light grade for earth lead protection up to main earth test point and includingconcrete pit in PCC (1:3:6) typeC 1 pre cast RCC (1:2:4) type B1 cover slab 450 x 450 x 50 mm with one handle for lifting made out of 8 mm dia MS bar, wire mash, 20 mm bore GI tubing(L. G.) for watering ,charcoal or coal and salt in alternate layers including excavation earth work complete all as specified and directed Electrical plate no 3 of SSR Part-I.Note 1:-The contract sum shall be arrieved at after deducting amount of schedule of credit from the total quated amount.Note 2-Contractor\"s supervisor and main worker would wear shirt/T-shirt of colour sky blue/brown/yellow preferable embosed with contractor\"s firm name while carriying out any activities in defence area for better check of security purpose. |
