|
| 1 | Dismantling of plain or corrugated steel sheeting,any gauge, thickness, including similar pattern roof covering.complete all as specified and directed. |
| 2 | S&F 0.63 mm thick Galvanized, corrugated mild steel sheetingwith two corrugations side lap, fixed with L-type /J-typer or cranked hook bolts and washers, in roofs, etc with zinc coating 275 grade ,complete all as specified and directed. |
| 3 | S&F0.63mm thick plain galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with Zinc coating 275 Grade complete all as specified and directed. |
| 4 | S&F0.63mm thick plain galvanised, mild steel sheeting, in stepped flashing (measured as the minimum rectangle from which the pieces can be cut) complete with grade of zince coating 275. fixed with nail complete all as specified and directed. |
| 5 | Labour onlyfor refixing 0.63 mm thick Galvanized, corrugated mild steel sheetingwith two corrugations side lap, fixed with L-type , J-typer or cranked hook bolts and washers, in roofs, etc ,complete all as specified and directed. Note :NewL-type/J-typer or cranked hook bolts and washers required shall deemed to be includede in quoted rates |
| 6 | Labour onlyfor refixing0.63mm thick plain galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with Zinc coating 275 Grade complete all as specified and directed.Note :Note :Newstraight flashings (length and girth as fixed) hook bolts and washers required shall deemed to be includede in quoted rates |
| 7 | Labour onlyfor refixing 0.63mm thick plain galvanised, mild steel sheeting, in stepped flashing (measured as the minimum rectangle from which the pieces can be cut) complete with grade of zince coating 275. fixed with nail complete all as specified and directed.Note :Nails (length and girth as fixed)required shall deemed to be includede in quoted rates |
| 8 | M & L for Preparing new zinc (or galvanised) surfaces to recieve painting , by coating with mordant solution including washing and cleaning etc and applying two coat of synthetic enamel paint over a coat of red oxided zinc chorome primer complete all as specified and directed |
| 9 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 10 | S&F hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embedding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 410-0 or Fe 310-0, complete all as specified and directed. |
| 11 | Dismantling wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards / slabs / blankets any thickness including cover fillets.complete all as specified and directed. |
| 12 | M&L for 4mm thick plywood, grade BWR,type BB, fixed with nails to timber frame work complete all as specified and directed. |
| 13 | M&L for 4mm thick Veneered decorative plywood, grade -I (with BWR resin),type BB, fixed with nails to timber frame work complete all as specified and directed. |
| 14 | M&L for non asbestos fibrre cement building boards 4mm thick fixed/ inserted to GI frame work. complete all as specified and directed. |
| 15 | M&L GI frame work for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylone sleeves and screws at 450mm centre to centre / intermediate channel 0.9 mm thick having two equal flanges of 15mm each and web of 45 mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section ( not exc 1.2m length) of 0.55 mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre complete includinghangers 6 mm dia G I (upto 1200 mm length ) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3 mm size 60 mm long and expansion hold fasteners 12.5 mm dia 40 mm long complete all as specified and directed |
| 16 | M&L for preparation of new undecorated surfaces of wood/ceiling by brooming down and scraping where ever necessary and applying two oil emulsion distemper white or tinted all complete as specified and directed |
| 17 | M&L for preparation of new wooden surface of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer.complete all as specified and directed |
| 18 | Dismantling timber scantling 40 Sqcm and over in section, unframed work in any position complete all as specified and directed. |
| 19 | M&L for second class clean sawn hard-wood in scantling fixed. complete all as specified and directed. |
| 20 | M&L for preparation of new wooden surface of any description not otherwise described over 10 cm width or girth and applying two coats Creosote Oil.complete all as specified and directed |
| 21 | Demolition of brick , built in cement mortar including all quoins, pillars etc. and removal of rubbish out side MD land at the location decided by the Engineer-in-charge complete all as specified & directed. |
| 22 | M&L for old sizebrick work with sub class \"B\" built in CM (1 : 6) straight or curved on plan exc 6m mean radius on plan .complete all as specified and directed. |
| 23 | M&L for brick work with sub class \"B\" brick, straight or curved on plan exc 6m radius,built in cement mortar (1:4) complete all as specified and directed. |
| 24 | M&L for 40mm thick damp proof course to horizontal or vertical surfaces in cement concrete (1:2:4), type B-0 (using 12.mm graded aggregates)including necessary formwork ( using WPC paid seperately as supply only) |
| 25 | Taking down cementplaster on brick, concrete or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc and removal of rubbish out side MD land at the location decided by the Engineer-in-charge complete all as specified andas directed. |
| 26 | M& L for Rendering 15mm thick on fair faces ofbrick work or concrete surfacesin Cement Mortar (1:4) and even and smoothwithout using extra cement including mixing of water proofing compound wherever required .complete all as specified and directed. Note :WPC shall be measured & paid seprately. |
| 27 | Supply only internalwater proofing compound \"ISI\" markedcomplete all as specified and directed. |
| 28 | M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in Cement Mortar (1 : 6) and finishing even and smooth without using extra cement.complete all as specified and directed. |
| 29 | M&L forpreparation new plastered surfaces of walls and applying two coats of cement base paint over a coat of alkali resistant paint complete all as specified and directed. |
| 30 | M&L forpreparation new plastered surfaces of walls and applying two coats of Oil Bound Distemoer paint over a coat of primer complete all as specified and directed. |
| 31 | Demolition of cement concrete (unreinforced) in ground floors and pavings not exc 15 cm thickness (below or above ground level) and removal of debris out of MD land at the location decided by the Engineer-in-charge complete all as specified andas directed. |
| 32 | M & L for 75 mm thick cement concrete (1:3:6) type C-2,(using 40mmgraded stone aggregates) as in plinth protection finished fair and even with out using extra cement. complete all as specified and directed. |
| 33 | M&L for 25 mm thick Plain cement concrete type B-0, (1 : 2 : 4 )(using 12.5 mm graded stone aggregate) as in sub-base to receive floor finishes.complete all as specified and directed. |
| 34 | M&L for non-skidjoint free coloured ceramic tiles 7 to 8mm thickarea of each tile exceeding 0.06 Sqm but not exceeding 0.11 sqm, in floors etc set and jointed in neat cement slurry over and including15mm thick screed bed or bedding layer of cement mortar (1:6) complete all as specified and directed. |
| 35 | M&L for non-skidjoint free coloured ceramic tiles 7 to 8mm thickarea of each tile exceeding 0.11 Sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry over and including15mm thick screed bed or bedding layer of cement mortar (1:6),complete all as specified and directed. |
| 36 | M&L for non-skidjoint free coloured ceramic tiles 7 to 8mm thickarea of each tile exceeding 0.11 Sqm but not exceeding 0.18 sqm, in skirting etc set and jointed in neat cement slurry over and includingplastering 10mm thick on fair faces of brickwork or concrete surfaces in CM (1:4)complete all as specified and directed. |
| 37 | M&L glazed ceramiccoloured tiles in vertical surface 300x 200x 7mm set and jointed in neat cement slurry over and includingplastering 10mm thick on fair faces of brickwork or concrete surfaces in CM (1:4) complete all as specified and directed. |
| 38 | M & L for 50mm thick plain cement concrete (1:3:6) type B1 (using 20 mm graded crushed stone aggregate),as in sub-base to receive floor finishes. complete all as specified and directed. |
| 39 | M&L chequered cement concrete tile 20CM x 20CM x 19 to 20 mm thick with grey cement and pigment set, jointed and pointed in neat cement slurry over and including 15 mm thick screed bed or bedding layer of cement mortar (1:6), complete all as specified and directed. |
| 40 | Demolition of cement concrete (unreinforced) of any description and any position not otherwise specifically provided for and removal of debris out of MD land at the location decided by the Engineer-in-charge complete all as specified andas directed. |
| 41 | M&L for Cement concrete (1 : 3 : 6) type C2, (using 40mm graded stone aggregate)as in surface channels and drains, complete all as specified andas directed. |
| 42 | Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred / stopped ends etc complete all as specified andas directed. |
| 43 | S & Fin repairs 18/19 mm thick Prelaminated Particle Board ,exterior grade, prelaminated one side with decorative choice lamination & other side balancig white lamination, fixed with nailsfor pelmet boxes. complete all as specified and directed. |
| 44 | S&F harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc. complete all as specified anddirected. |
| 45 | M&L for preparation of old painted wooden surfaces exceeding 10 cm width or girth and applying two coat of synthetic enamel paint complete all as specified and directed. |
| 46 | M&L for preparation of oldpainted surfaces of steel and iron work of any description over 10 cm width or girth not otherwise described andapplying one coat of synthetic enamel paiintcomplete all as specified and directed. |
