|
| 1 | Demolition of cement concrete infloors n.exc 15 cm thick in ground floor (below or ground level) and in any position all as specified |
| 2 | M&L for 40 mm thick PCC 1:2:4 type B1 (using 20 mm graded granite stone aggregate) in floorings including finishing the surface even and smooth using extra cement all as specified |
| 3 | S&F glass dividing strips, 3mm thick 38mm width and inserted in position to confirm to design. |
| 4 | Plain Cement Concrete 75 mm thick Type C2 1:3:6 (using 40 mm graded granite stone aggregate) in plinth protection and path finishing surface even and smooth with out using extra cement. |
| 5 | Demolition of AC pipes 100mm dia |
| 6 | S&F PVC (SWR) pipes single sockted 110mm dia in any length with rubber ring joints fixed to walls |
| 7 | -Ditto- all as per Item above but 75mm dia |
| 8 | S&F PVC (SWR) bends any radius, with access door110mm dia. |
| 9 | S&F PVC (SWR) junction single, (single T) equal or unequal with access door110mm dia. |
| 10 | S&F PVC (SWR) bends any radius, with access door75mm dia. |
| 11 | S&F PVC (SWR) floor trap, 75mm dia outlet, plain with grating incl jointing with solvent cement. |
| 12 | Dismantling plain or corrugated steel sheeting of any thickness as in roof covering |
| 13 | S&F 0.63 mm thick galvanised corrugated MS sheeting with two corrugationside lap fixed with L type, J type or cranked hooks bolts in roofs,wall etc with gde of zinc coating 275 |
| 14 | S&Fplain galvanised MS steel sheeting0.80 mm thick in ridgesh,valley gutters ,hips ,etc with gde of zinc coating 275 |
| 15 | M&L for preparing new galvanised surfaces to receive painting, by coating mordant solution incl washing and cleaning etc, and applying two coats of synthetic enamel paint to steel surfaces over a coat of red oxide primer over 10cm girth or width. |
| 16 | Dismantling floor, hearth or wall tiling including cement mortar bedding including backing coat, removing serviceable tilesand rubbish off the premises. |
| 17 | Material and labour for 10mm thick rendering in cement mortor(1:4) on brick or concrete wallsurfaces as backing coat for ceramic tiles. |
| 18 | Material and labour for Glazed ceramic colouredtilles in vertical surface 300 x 200 x 7 mm thick set and jointed in neat cement slurry and pointed in white or coloure cement to match |
| 19 | Material and labour for 15mm thick screed bed in cement mortar (1:6) for laying floor finish all as specified and directed |
| 20 | M&L 7 to 8mm thick( area of each tileexc. 0.11 sqm but not exc. 0.18 sqm) non skid coloured ceramic tiles in floor etc. set and jointed in neat cement slurry and pointed in whitecement to match the shade. |
| 21 | .M&L 7 to 8mm thick( area of each tileexc. 0.06 sqm but not exc. 0.11 sqm) non skid White ceramic tiles in floor etc. set and jointed in neat cement slurry and pointed in whitecement to match the shade. |
| 22 | Taking down cement plaster on brick, concrete block wall/ceiling or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc. |
| 23 | Material and labour for 10mm thick rendering in cement mortar (1:6) on brick or concrete surfaces finished even & smooth W/O using extra cement. |
| 24 | Preparing newly plastered surfaces of walls and applying three coats of white wash. |
| 25 | Taking down Chowkats or frames not exceeding 1.5 Sq. M each (Without taking off shutters from the frames) |
| 26 | Taking down Chowkats or frames exceeding 1.5 Sq. M but not exceeding 4 Sq. M each (Without taking off shutters from the frame) |
| 27 | Supply and fix 30 mm thick 2nd class hardwood plain framed paneled shutters (any numbers of panels) with panel of timber flat on both sides (feather edged) complete including fitted to chowkats |
| 28 | Supply and fix 30 mm thick 2nd class hardwood glazed and skeleton shutters open rebated and prepared to receive glass, gauge etc. (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securingglass etc. size of members of shuttersas specified SSR Part-I, section 8, clause 8.20(b) |
| 29 | Supply and fix flush shutters, 30mm thick solid core construction, with block board core and plywood face panels, commercial type on both sides |
| 30 | Supply and fix 2nd class hard wood plain solid straight chowkats and frame wrought framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed. |
| 31 | S&F Mild steel flat iron 30 x 6mm as in hold fasts,clamps,wall ties ,bands, straps supports or stays for rain water etc. |
| 32 | S&F MS window guard bars, window frames etc articles confirming to Fe 410-0 or Fe 310-0. |
| 33 | S&F PVC coated 25mm dia mild steel curtain rod of medium weight and fixing brackets, curtain ring @ 7 nos/Rm and decorative end supports etc complete all as directed” |
| 34 | Material and labour for preparation of new surface of wood and wood based materials over 10 Cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer |
| 35 | Supply and fix 100mm long MS butt hinge medium weight cold rolled. |
| 36 | Supply and fix 75mm long MS butt hinge medium weight cold rolled. |
| 37 | Supply and fix aluminium anodized barrel tower bolt 150mm long extruded section. |
| 38 | Supply and fix aluminium anodized barrel tower bolt 125mm long extruded section. |
| 39 | Supply and fix 150mm size aluminium anodized handle fabricated type |
| 40 | Supply and fix300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy. |
| 41 | Hacking out old broken glass (any thickness, size, quality or description) from metal or woodenframes. |
| 42 | S&F 4mm thick sheet glass ordinary quality and glazing with oil putty or wooden beading in squares not exceeding 0.5 Sq. M in each pane. |
| 43 | S&F 4mm thick frosted glass, ordinary quality and glazing with oil putty in squares n.exc 0.5 sqm in each pane. |
| 44 | S&F in repairs stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of apperture 1.40 mm and fixed with tinned tacks or galvanised wire staples. |
| 45 | S&F Gun metal 20mm bore globe or gate valves, with irn wheel head, screwed both ends for iron pipe and fixed. |
| 46 | -ditto-as item abovebut 15 mm bore |
| 47 | S&F in repair 15 mm bore stop valves,cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe orfor nions and fixed |
| 48 | S&F in repair15mm bore CP pillar cock, with capsten head, chromium plated screwed down high pressure with or without lettered HOT or COLD with long screwed shanks and fly nuts screwed for iron pipes. |
| 49 | S&F inrepair bib cock brass 15mm borecast coper alloy withcrutch or butterfly handle, screwed down, screwed for iron pipe repairs. |
| 50 | S & F repairs Vitreous China squatting pan, \"Orissa\" pattern, size 580 x440 mm white, with integral foot rest (excluding flusing cistern and flush pipe) |
| 51 | S&F in repair vitreous china wash down water closet pan (pedestal pattern), white |
| 52 | S & F in repairs 10 litres PVC, valve less, Syphonic action type, Flushing cistern low level, white with inlet ball valve float chain and pull and bracketscomplete. |
| 53 | S&F in repairvitreous china wash hand basin white flat back of size 550mmx400mm including pipe chain and plug,CI bracketscomplete all as specified and directed(Make: Hindware/Parry) |
| 54 | S&F repair LDPE pipes of pressure rating 6kgf/sq.cm 40mm bore |
| 55 | S&F avitreous china urinal bowl flat back, size of 465 x 355n x 265 mm white (minimum), with grating and union for discharge pipe, fixed in repair . |
| 56 | S&F swivel shower of PTMT any colour for fixing with 15mm pipe (Minimum weight 40 gms ) |
| 57 | S & F in Towel rail 450mm long of PTMT fixed with and including chromium plated brass screws and wooden / plastic cleats |
| 58 | S&F in repair waste coupling PTMT 40mm(half or full threaded) min weight 60gms |
| 59 | S & F PVC connecting pipe 450 mm long |
| 60 | S&F in repairs 600mm x450mm bevelled edge mirror of selected quality glass, mounted on 6 mm thick AC building board fixed to wooden plugs with chromium plated brass screws and cup washers all as specified and directed |
| 61 | Taking up or down 15 mm bore steel tubing and connections. |
| 62 | Taking up or down 20 mm bore steel tubing and connections. |
| 63 | S & F 15 mm bore Galvanized Steel tubes, medium grade with all fittings forwater supply pipes fixed to walls orlaid in trenches . |
| 64 | S & F in repair 20 mm bore Galvanized Steel tubes, medium grade with all fittings forwater supply pipes fixed to walls orlaid in trenches complete all as specified and directed by Eng-in-charge. |
| 65 | Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing |
| 66 | Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm widthtuck inside with solvent cement for stiles and plain colour PVC sheets for top rail,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of lain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheetbeading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. |
| 67 | S&F in repair 15 mm bore PVC bip tap standard of PTMT any colour screwed, for iron pipe and fixed. (Minimum weight 15 mm=90 gms/20 mm-125 gms |
| 68 | Grating doon 125 mm dia with/without waste hole of PTMT (Minimum weight 40 gms) |
| 69 | Demolition of precast block walling built in cement mortor |
| 70 | M&L PCC 1:3:6 type C1 as in block masonry with solid blocks exc 10 cm in width and set in CM 1:4. |
| 71 | M&L rendering 15 mm thick on block masonry in CM 1:6 |
| 72 | Preparing surfaces of walls and applying one coat of white wash. |
| 73 | M& L Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing typescomplete all as specifird and directed. |
| 74 | Supply andfixin repair chromium plated brass Bib cock suitable for 15mm bore GI tubing complete all as specified and directed by Eng-in-charge. |
| 75 | Supply and fixing 32mm dia PVC (flexible) waste pipe for wash hand basin complete in repairs. |
| 76 | Dismantling wall and ceiling boards (Hard board) incl cover fillets. |
| 77 | Fixing only 6 mm thick ply wood, grade BWR, type BB, fixed with nails to timber frame work on wall surfaces. |
| 78 | M&L 6mm thick plywood grade BWR type BB fixed with nails to timber frame work as in wall cladding. |
| 79 | All as per item abovebut 4 mm fixed in Ceiling -ditto- |
| 80 | M&L for applying two coats of synthetic enamel paint to new plywood surface exc. 10 cm in width or girth over a coat of pink primer toall as specified and directed |
| 81 | M&L 2nd class hard wood Plain fillets square, ractangle or triangular in section, clean sawn secured with nailsexc 6 sqcm n exc 13sqcmas in forking piece all as specified |
| 82 | Dismantling of boarding of any description fixed in any position with nails. |
| 83 | S&F 50mm thick second class hardwood boarding, clean sawn, fixed with nails. |
| 84 | S&F PVC tank cover suitable for up to 2000 ltrs capacity PVC overhead tank complete all as specified. |
| 85 | S&F in repairs 15 mm bore brass float valve, high pressure with polythene float & fly nut complete, screwed for GI pipe of various sizes(as applicable) includingnecessary GI fittings ,completeall as specified and directed. |
| 86 | -ditto-as item abovebut 20 mm bore |
| 87 | Dismantling of water tanks exc 500 ltrs & n. exc1000 ltrs capacity and removing to store. |
| 88 | Dismantling of water tanks exc 1000 ltrs & n. exc 2000 ltrs capacity and removing to store. |
| 89 | Fix only PVC water storage tanks of 500 ltrs capacity rotational moulded (multi layered cylindrical vertical with closed top) hoisted and fixed in position all as specified |
| 90 | Fixing only PVC water storage tanks of 1000 ltrs capacity rotational moulded (multi layered cylindrical vertical with closed top) hoisted and fixed in position all as specified in(Make : Sintex/Polycon /Poly Tap ) |
| 91 | Fixing only PVC water storage tanks of 2000 ltrs capacity rotational moulded (multi layered cylindrical vertical with closed top) hoisted and fixed in position all as specified in(Make : Sintex/Polycon /Poly Tap ) |
| 92 | Fixing only vitreous china wash hand basin white flat back of size 550mmx400mm including pipe chain and plug,CI bracketscomplete all as specified and directed |
| 93 | Fixing only Vitreous China squatting pan, \"Orissa\" pattern, size 580 x440 mm white, with integral foot rest (excluding flusing cistern and flush pipe) |
| 94 | Fixing only vitreous china wash down water closet pan (pedestal pattern), white |
| 95 | Fixing only 10 litres PVC, valve less, Syphonic action type, Flushing cistern low level, white with inlet ball valve float chain and pull and bracketscomplete. |
