Construction Of Warehouse For The Storage Of Evms ( Cus And Bus ) And Vvpats In D . A . C . Jalandhar, Jalandhar-Punjab

TDR : 27957280

Tender Notice
BOQ

Expired

Jalandhar , Punjab

Tender Brief : Construction Of Warehouse For The Storage Of Evms ( Cus And Bus ) And Vvpats In D . A . C . Jalandhar

Document Fees
₹ 20000 /-

EMD
₹ 880600.0 /-

Tender Value
Refer document

Submission Date
31-05-2021

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !

Name of Work :- DNIT FOR CONSTRUCTION OF WAREHOUSE FOR THE STORAGE OF EVMs (CUs & BUs) AND VVPATs IN D.A.C. JALANDHAR
1	1	i) CIVIL WORKS:-	2
2	2	Dismantling of brick work in cement sand mortar / lime mortar including T&P scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material. & staking the serviceable material with all lifts & lead of 100 metre (By Mechanical Means)	3	192.18	Cum
3	3	Credit of Bricks bats	4	96.09	Cum
4	4	Credit of Bricks	5	23004	Each
5	5	Dismantling concrete or precast concrete.\ne) Reinforced Cement concrete (Slab)	6	177.29	Cum
6	6	Dismantling cement conglomerate floors (25mm\nto 50mm) thick including concrete base.	7	499.43	Sqm
7	7	Dismantling brick or flagged stone flooring\nwithout concrete base.	8	797.08	Sqm
8	8	Removing doors together with the dismantling of walls	9	14	Each
9	9	Removing windows together with the dismantling of walls	10	2	Each
10	10	Removing of Malba and disposal of material upto lead of 5 Km Avg	11	762	Cum
11	11	Earth work in excavation in foundations trenches etc. in all kinds of soil where Pick-Jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm, layers with compaction including disposal of all surplus soil as directed within lead of 30 metres.	12	439	Cum
12	12	Providing and applying Anti Termite Treatment using pre constructional chemical treatment measures as per IS - 6313 - 2001 ( Part 2 ) & using Chemical containg chloropyrifos systemic insecticide diluted to manufacturer's specifications (i) In foundation pits, by treating the bottom & sides upto height of 300mm by uniformly spraying solution @ 5 Litre / Sqm (ii) In the refill earth on both sides of all built up walls @ 7.5 Litre/Running meter ( width - 300 mm, depth- 450 mm ) (iii) Before laying the floor, by uniformly sprinkling the top surface of the consolidated earth within the outer perimeter @ 5 Litre solution per Sqm.	13	342.38	Litre
13	13	Cement concrete 1:6:12 with Stone agreegate 40mm gauge by mechanical means using concrete mixer volumetric type	14	17	Cum
14	14	Providing and laying cement concrete 1:4;8 with stone ballast with 20 mm gauge by mechanical means using concrete mixer volumetric type	15	0.38	Cum
15	15	Reinforced cement concrete M-25 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in foundation and plinth.	16	86.13	Cum
16	16	Reinforced cement concrete M-30 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in superstructure.\nGround Floor	17	179.77	Cum
17	17	First Floor	18	177.11	Cum
18	18	Extra rate for First Floor	19	177.11	Cum
19	19	Second Floor	20	165.51	Cum
20	20	Extra rate for Second Floor	21	165.51	Cum
21	21	Third Floor	22	167.01	Cum
22	22	Extra rate for Third Floor	23	167.01	Cum
23	23	Mumty	24	36.74	Cum
24	24	Extra rate for Mumty	25	36.74	Cum
25	25	Shuttering for faces of concrete foundations and foundation beam & plinth beam (vertical or battering)	26	129.2	Sqm
26	26	Centring and shuttering for columns (Square & rectuangular\n\nGround Floor	27	391.75	Sqm
27	27	First Floor	28	261.17	Sqm
28	28	Extra rate for First Floor	29	261.17	Sqm
29	29	Second Floor	30	261.17	Sqm
30	30	Extra rate for Second Floor	31	261.17	Sqm
31	31	Third Floor	32	261.17	Sqm
32	32	Extra rate for Third Floor	33	261.17	Sqm
33	33	Mumty	34	53.1	Sqm
34	34	Extra rate for Mumty	35	53.1	Sqm
35	35	Centring and shuttering for flat surfaces such as suspended floors, roofs,landing, chajjas etc.\nGround Floor	36	557.66	Sqm
36	36	First Floor	37	585.72	Sqm
37	37	Extra rate for First Floor	38	585.72	Sqm
38	38	Second Floor	39	522.55	Sqm
39	39	Extra rate for Second Floor	40	522.55	Sqm
40	40	Third Floor	41	540.4	Sqm
41	41	Extra rate for Third Floor	42	540.4	Sqm
42	42	Mumty	43	131.17	Sqm
43	43	Extra rate for Mumty	44	131.17	Sqm
44	44	Centring and shuttering for sides and soffits of beams, lintels\nGround Floor	45	356.63	Sqm
45	45	First Floor	46	377.39	Sqm
46	46	Extra rate for First Floor	47	377.39	Sqm
47	47	Second Floor	48	320.09	Sqm
48	48	Extra rate for Second Floor	49	320.09	Sqm
49	49	Third Floor	50	320.09	Sqm
50	50	Extra rate for Third Floor	51	320.09	Sqm
51	51	Mumty	52	24.41	Sqm
52	52	Extra rate for Mumty	53	24.41	Sqm
53	53	Centring and shuttering for faces of walls, partitions, retaining walls and the like (vertical or battering) including attached pillasters, buttersses etc when curved.\nGround Floor	54	154.6	Sqm
54	54	First Floor	55	154.87	Sqm
55	55	Extra rate for First Floor	56	154.87	Sqm
56	56	Second Floor	57	169.77	Sqm
57	57	Extra rate for Second Floor	58	169.77	Sqm
58	58	Third Floor	59	154.9	Sqm
59	59	Extra rate for Third Floor	60	154.9	Sqm
60	60	Mumty	61	136.44	Sqm
61	61	Extra rate for Mumty	62	136.44	Sqm
62	62	Centring & suttering for carbe.s, parapets, fascias and other similar items including edges.	63
63	63	Second Floor	64	304.38	Sqm
64	64	Extra rate for Second Floor	65	304.38	Sqm
65	65	Third Floor	66	304.38	Sqm
66	66	Extra rate for Third Floor	67	304.38	Sqm
67	67	Cold twisted deformed (Ribbed/ Tor Steel Bar/TMT) Bars Fe 500 grade as per IS 1786-2008, for R.C.C works, where not including in the complete rate of RCC including bending and placing in position complete \nFoundation	68	57.93	Qtl.
68	68	Extra rate for Steel Fe-415, Fe-500, Fe-550 (Integrated plant market)	69	57.93	Qtl.
69	69	Ground Floor	70	232.71	Qtl.
70	70	Extra rate for Steel Fe-415, Fe-500, Fe-550 (Integrated plant market)	71	232.71	Qtl.
71	71	First Floor	72	194.73	Qtl.
72	72	Extra rate for First Floor	73	194.73	Qtl.
73	73	Extra rate for Steel Fe-415, Fe-500, Fe-550 (Integrated plant market)	74	194.73	Qtl.
74	74	Second Floor	75	198.45	Qtl.
75	75	Extra rate for Second Floor	76	198.45	Qtl.
76	76	Extra rate for Steel Fe-415, Fe-500, Fe-550 (Integrated plant market)	77	198.45	Qtl.
77	77	Third Floor	78	200.17	Qtl.
78	78	Extra rate for Third Floor	79	200.17	Qtl.
79	79	Extra rate for Steel Fe-415, Fe-500, Fe-550 (Integrated plant market)	80	200.17	Qtl.
80	80	Mumty	81	43.68	Qtl.
81	81	Extra rate for Mumty	82	43.68	Qtl.
82	82	Extra rate for Steel Fe-415, Fe-500, Fe-550 (Integrated plant market)	83	43.68	Qtl.
83	83	First class burnt brick work laid in cement sand mortar 1:6 in foundation and plinth	84	91	Cum
84	84	20mm thick cement plaster damp proof course 1;3 with two coats of bitumen (Vertical)	85	23.61	Sqm
85	85	Damp proof course 2.5 cm thick of cement concrete 1:2:4 with two coats of bitumen 20/30 penetration @ 1.65 kg/sqm laid hot & sanded	86	29.54	Sqm
86	86	Providing and laying in super structure for first storey factory made with vibro-hydraulic compaction machine precast Hollow block of cement concrete setting in position with cement mortar 1:3 (1 cement:3 course sand ) including cost of hosting, centering and shuttering complete as per IS:2185 (Part-1): 2005.\nGround Floor	87	128.49	Cum
87	87	First Floor	88	164.3	Cum
88	88	Extra rate for First Floor	89	164.3	Cum
89	89	Second Floor	90	131.64	Cum
90	90	Extra rate for Second Floor	91	131.64	Cum
91	91	Third Floor	92	98.36	Cum
92	92	Extra rate for Third Floor	93	98.36	Cum
93	93	Mumty	94	53.08	Cum
94	94	Extra rate for Mumty	95	53.08	Cum
95	95	Providing and fixing stair case railing made out of M.S. square bars 20x20mm as vertical part 0.70 metre high fixed with M.S. base plate of 40x40x6mm and flat iron 40x6mm as hand rail complete in all respects as per PWD specifications.	96	56.28	Mtr
96	96	Providing, laying, fixing M.S. pipe Providing and fixing M.S Pipe size 50mmdia on stair railing	97	56.28	Mtr
97	97	115 mm thick brick wall with every fourth course reinforced with hoop iron laid in 1:4 cement sand mortar in super structure	98	15.85	Sqm
98	98	12.5 mm thick cement plaster 1:5 on walls	99	1458	Sqm
99	99	20 mm Thick cement plaster 1:5 on walls	100	1458	Sqm
100	100	12.5 mm thick cement plaster 1:4 on walls	101	3093	Sqm
101	101	20 mm Thick cement plaster 1:4 in two coats	102	3093	Sqm
102	102	Providing and fixing 110 mm dia . U.P.V.C Rain water pipe of 2.5 kgf./sqm as per IS:4985 including jointing during masonary complete as per specifications and to the entire satisfaction of Engineer-in- charge. (If fixed on wall face clamp to be paid separatly as per respective item)	103	378	Mtr
103	103	Providing and fixing 110 mm dia SWR U.P.V.C bend for Rain water pipe as per IS:14735 including jointing complete as per specifications and to the entire satisfaction of Engineer- in- charge.	104	20	Each
104	104	Providing and fixing 110 mm dia SWR U.P.V.C Coupling/Sockete for Rain water pipe as per IS:14735 including jointing complete as per specifications and to the entire satisfaction of Engineer- in- charge.	105	160	Each
105	105	Top khurra 0.6m x 0.6m for rain water pipe in 25mm thick cement concrete 1:2:4 over 50mm thick cement concrete 1:8:16.	106	20	Each
106	106	Bottom Khurra on ground 1.2m x 0.6m consisting of brick on-edge laid in cement mortar 1:3 over 75mm cement concrete 1:8:16 including 12.5mm thick cement plaster 1:3	107	20	Each
107	107	Providing and fixing in position gratings 150mm x 150mm for gully trap..	108	20	Each
108	108	Terracing consiting of tiles 22.86x11.43x3.83cm laid over 25 mm mud plaster 7.5 cm mud filling on another layer of 25mm mud plaster including two coats of bitumen laid hot at 1.65 Kg. /Sqm top of R.C.C. slab including grouting with cement sand mortar 1:4 and top surface to be left clean after\nwire brushing	109	572	Sqm
109	109	Water proofing treatment of Roof Slab with High performance cementitious two component product, consisting of a powder component and an acrylic polymer using two coats ( Dr Fixit Roofseal flex - Packaging Size: 12 .5 kg (7.5 kg powder + 5 kg polymer) / equivalent water proofing Solution ). The slurry thus formed by mixing the two, is to be applied on new roofs to forms a seamless, highly elastic, non-toxic waterproofing layer on the roof with a life expectancy of 7 years. The work shall be carried out all complete as per specification and the direction of the Engineer-in-charge.	110	572	Sqm
110	110	Cement concrete 1:2:4 gola 10cm x 10cm concave quadrant along junction of roofs with parapet wall finished smooth, where specially specified.	111	120	Mtr
111	111	Earth Filling Under Floors With Earth Brought From Outside Including Watering and Ramming Complete With Avg Lead of 8 Km	112	163	Cum
112	112	Earth filling under floors with surplus ordinary soil or soil containing gravel or kankar upto 40% excavated from foundation and taken only from outside the building plinth in 15 cm layers including ramming, watering and consolidating lead upto 30 metres	113	175	Cum
113	113	Base course of floor consisting of 100mm thick cement concrete 1:8:16 and 100mm sand filling using mechanical mixer for mixing of material	114	319	Sqm
114	114	Screed of 50 mm thick cement concrete 1: 8: 16 to be laid below the topping using mechanical mixer for mixing of material\nFirst Floor & 2nd Floor	115	1334	Sqm
115	115	3rd Floor	116	1334	Sqm
116	116	Kotah stone tile flooring 20 mm to 25 mm thick over 20 mm thick base of cement mortar 1: 4 (1 cement and 4 sand ) laid and jointed with neat cement slurry mixed with pigment to match the shade of stone including rubbing and polishing.\nGround Floor,	117	408	Sqm
117	117	First Floor	118	458	Sqm
118	118	Second Floor	119	458	Sqm
119	119	Third Floor	120	458	Sqm
120	120	For Mumty	121	46	Sqm
121	121	Kotah stone tile flooring 20 mm thick in skirting, riserof steps dado walls and pillers laid in 12.5mm thick cement Morter 1: 3 (1 cement and 3 sand ) laid and jointed with neat cement slurry mixed with pigment to match the shade of stone including rubbing and polishing.	122	61	Sqm
122	122	Kotah stone tile flooring 20 mm thick in skirting, riserof steps dado walls and pillers laid in 12.5mm thick cement Morter 1: 3 (1 cement and 3 sand ) laid and jointed with neat cement slurry mixed with pigment to match the shade of stone including rubbing and polishing.	123	74.84	Sqm
123	123	Cement concrete 1:3:6 with stone ballast mixing by mechanical means using concrete mixer volumetric type	124	3.47	Cum
124	124	Precast chequered tiles of 20 mm thickness in ordinary grey cement without chips of size and colour as required laid on 20 mm thick bed of cement mortar 1: 3 (1 cement 3 sand) with neat cement slurry between joinits and over the base for floors, treads of steps on landings.	125	680.85	Sqm
125	125	Extra labour for projected nosing of stair case of any shape and design.	126	71.65	Mtr
126	126	Wrought iron and mild steel ladders, framed grills, grating etc. with ends of bars rivetted or welded or forged, framed window guards, barred iron doors, stair case, iron railing including cost of bolts and nuts or screws or welding rod, complete fixed in position as per PWD specifications No. 18.4	127	7.25	Qtl.
127	127	Providing and laying Vitrified floor tiles 600 x 600mm size premium quality with water absorption less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on either 20mm thick cement mortar 1:4 ( 1 cement : 4 coarse sand) for new flooring or tile adhesive of approved make (water based) IS : 15477 marked using 5 kg. adhesive per sqm of tile area in average 3mm thickness over existing floor, including grouting the joints with white cement and matching pigments etc., complete . (Flooring) complete in all respect as per specifcation, drawing and to the entire satisfication of Engineer-In-Charge.(Flooring)	128	55.2	Sqm
128	128	Supplying and fixing rolling shutters, of approved make, made of 80mmx1.25mm, M.S. Laths, interlocked together through their entire length and jointed together, at the end, by end locks, mounted on specially designed pipe shaft, with brackets, side guides, 27.5cm long wire spring grade No. 2 and arrangement for inside and outside locking with push and pull operation complete, including top cover 0.80mm thick (payment is to be\nmade for the exact size of opening where rolling shutter is to be fixed)	129	20.76	Sqm
129	129	Providing and fixing ball bearing for push and pull type rolling shutters, from 9.20 to 12 sqm area	130	1	Each
130	130	Extra for providing mechanical device, chain and crank operation, for operating rolling shutter, exceeding 11.20 sqm in area, of the rolling shutter	131	1	Each
131	131	Providing and Fixing in position collapsible steel shutters, with vertical channels 20mmx10mmx2mm and braced with flat iron diagonals 20mmx5mm size with top and bottom rails of T iron 40mmx40mmx6mm with 38mm dia steel pulleys, complete with bolts, nuts, locking arrangements, stoppers, handles, etc. complete in all respects.	132	26.35	Sqm
132	132	Supplying Pressed steel sheet frames (chowkhat) consisting of 18gauge (1.25 mm thick steel sheet of the specified section, including iron lugs (hold fast) iron hinges conforming to PWD specification including bolts for fixing stops lock notch provision for receiving tower bolts and finished with 1 primer coat approved quality, fixed in position excluding the cost of cement concrete 1:3:6 for fillings in the frame and cement concrete 1:2:4 for lugs complete.\nc) Doors and windows frame of size 151mm x 60mm with 35 mm wide double rebate weighing 3.95 kg per meter.	133	365.88	Mtr
133	133	Factory manufactured flush door fixed in position iron hinges, etc (excluding the cost of any fittings other than specified above but including labour for fixing the same in position (Code : II Revision IS-2191 Part-I) 1973.\n(a) Commercial with elm or gurjan facing on both \ Sides with laminated core and lipped edges:-\niv) 35 mm thick	134	27.59	Sqm
134	134	Providing & fixing of Box type steel windows, made of various ERW section outer 60mm x 25mm, central mullion 60mm x 25mm, for shutter 50mm x 20mm having thickness of 1.25mm (18 gauge), shash bar MS Tee 25mm x 3mm where required joints mitered and electrically flashwelded, with iron fittings including necessary iron handles, hinged cleat, tower bolts, iron hold fast and pintle hinges complete (excluding glazing and wire gauge) and finished with ready mixed paint red lead non setting primer complete as per specification, Drawings and to the entire satisfaction of engineer-in-charge. (Note:- Glazing, wire gauge and grill will be paid as per respective items)	135	653.75	KG
135	135	Wire gauge fixed in steel windows, of standard rolled steel section with 3mm thick flat iron cover moulding of 12.5 mm width, fixed with machine screws, complete in all respects.	136	15.18	Sqm
136	136	Supplying and fixing glass panes with glazing clips and special metal sash putty of approved make.\nb) Glass panes 4mm or 10.75 kg / sqm\nexceeding 0.4 sqm of area	137	30.37	Sqm
137	137	Extra for providing & fixing Steel beading of approved shape steel tube beading size 12mm X 12mm, 18 gauge of approved shape and section with screw for fixing of glass panes instead of glazing clips and metal slash putty in steel doors , windows & Ventilators complete in all respect	138	199.25	Mtr
138	138	Providing & fixing factory made Solid PVC Chowkhat Door frame of the size 50mm x 47mm with a wall thickness of 5mm made out of extruded 5mm PVC foam sheet, mitre cut at 2 corners & joined with 2Nos of 150mm long brackets of 15 x 15mm M.S square tube. the two vertical doors profiles are to be reinforced with 19 x 19mm M.S square tube of 19 guage, the door framed shall be fixed to the wall using 65/100mm long M.S screws through the frame by using fasteners. a minimum of 4 nos of screws to be provided for each vertical member & minimum 2nos for horizontal member etc. as per manufacturer's specification,conforming to test criteria specified in IS:4020-1998, Drawings and to the entire satisfaction of engineer-in-charge.	139	24.39	Mtr
139	139	Providing & fixing 30mm thick Factory Made solid Panel PVC Door shutter\n(Pannel thickness 5mm) Consisting of frame made out of M.S tubes of 19 guage thickness and size of 19mm x 19mm for styles & 15mm x 15mm for top & bottom rails. M.S frame shall have a coat of steel primers of approved make & manufacture. M.S frame shall be covered with 5mm thick heat moulded PVC 'C' Channel of size 30 x 50mm forming styles, and 5mm thick, 75mm wide PVC sheets for top rail, lock rail & bottom rail on either side, and 10mm (5mm x 2) thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail. Panneling of 5mm thick PVC sheet to be fitted in the M.S Frame welded/Sealed to the styles & Rails with 30mm wide x 5mm thick PVC sheet beading on either side and joined together with solvent cement adhesive.an additional 5mm thick PVC strips of 20mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent cement adhesive etc. complete as per manufacturer's specification, conforming to test criteria specified in IS:4020-1998,Drawings and to the entire satisfaction of engineer-in-charge.	140	7.84	Sqm
140	140	Wire gauge Hollock wood door shutter without springs housed in chowkhat.	141	39.15	Sqm
141	141	Providing and fixing helical door spring 150mm (superior quality) including\nnecessary screws, complete \nb) Iron helical spring	142	1	Each
142	142	Providing and fixing hydraulic door closer ISI mark with necessary screw etc. complete\nc) I.S.I Designation No. III (size of door\n851mm to 1000mm)	143	14	Each
143	143	Providing & Fixing glass panes with nails and putty or wooden strip complete in all respect\nb) Glazing area above 0.09 Sqm\nii) 4MM THICK	144	2.93	Sqm
144	144	Cost of aluminum fittings complete for doors, windows such as tower bolts,\nhandles,Stoppers and screw etc. for these fittings (Excluding sliding bolt)\ni) For shutter area up to 0.50 sqm	145	75.59	Sqm
145	145	Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two or more coats to get required finish.	146	9102	Sqm
146	146	Distepering with Acrylic washable oil bound distemper (of approved manufacture) two or more coats over one priming coat to give an even shade	147	8097.19	Sqm
147	147	Finishing walls with acrylic smooth exterior paint of required shade with two or more coats applied @ 1.67 litre/10Sqm over and including base coat of water proofing Cement Paint applied @ 2.20 Kg/10 Sqm	148	6186	Sqm
148	148	Preparation of plywood surface for painting including sand papering the surface and applying filling with approved quality fillers consisting of white lead, linseed oil, Varnish, and Chalk Mitti including finishing the surface to required finish complete.	149	11.91	Sqm
149	149	Applying pink primer or aluminum priming coat on wood work including preparation of surface knotting and stopping etc	150	11.91	Sqm
150	150	Painting two or more coats with synthetic enamel paints in all shades on old wood work or metallic or plastered or concrete surface to give an even shade including rubbing down old paint.	151	230.817	Sqm
151	151	Cement Concrete 1:6:12 with 40mm gauge stone aggregate. mixing by mechanical means using concrete mixer volumetric type	152	64.76	Cum
152	152	Construction of unreinforced plain cement concrete pavement in M-30 mix design over a prepared sub base with cement contents 350kg per cum and coarse and fine aggregates conforming to IS:383 mixed with concrete mixer using weigh batcher, laid in position over 125 micron thick polythene sheet, compacted with needle vibrator, screed vibrator and plate vibrator, dewatering of free water with vaccum pump, finishing the surface with power floater, including provision of contraction and expansion joints as required, finishing to required lines and grades as per drawings and technical clause 1501 of MORD specifications	153	117.07	Cum
153	153	Construction of Plinth Protection	154
154	154	Earth work in excavation in foundations, trenches etc. in all kinds of soil where pick jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation	155	7.01	Cum
155	155	Cement concrete 1:6:12 with Stone agreegate 40mm gauge by mechanical means using concrete mixer volumetric type	156	2.71	Cum
156	156	First class burnt brick work laid in cement sand mortar 1:6 in foundation and plinth	157	13.01	Cum
157	157	Earth Filling	158	4.29	Cum
158	158	Base course of floor consisting of 100mm thick cement concrete 1:8:16 and 100mm sand filling using mechanical mixer for mixing of material	159	42.64	Sqm
159	159	Conglomerate floor 40 mm thick cement concrete topping 1:2:4	160	63.96	Sqm
160	160	12.5 mm thick cement plaster 1:5	161	32.98	Sqm
161	161	Construction of Boundary Wall	162
162	162	Earth work in excavation in foundations, trenches etc. in all kinds of soil where pick jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm. layers with compaction including disposal of all surplus soil as directed within a lead of 30 metres.	163	123.64	Cum
163	163	Cement concrete 1:6:12 with Stone agreegate 40mm gauge by mechanical means using concrete mixer volumetric type	164	15.03	Cum
164	164	First class burnt brick work laid in cement sand mortar 1:6 in foundation and plinth	165	39.37	Cum
165	165	Reinforced cement concrete M-25 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in foundation and plinth.	166	28.04	Cum
166	166	Reinforced cement concrete M-30 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in superstructure. (for Coulm)	167	3.7	Cum
167	167	Reinforced cement concrete M-30 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in superstructure. (for Beam)	168	10.17	Cum
168	168	Shuttering for faces of concrete foundations and foundation beam & plinth beam (vertical or battering)	169	42.06	Sqm
169	169	Centring and shuttering for columns (Square & rectuangular	170	29.59	Sqm
170	170	Centring and shuttering for flat surfaces such as suspended floors, roofs,landing, chajjas etc.\n	171	81.39	Sqm
171	171	Cold twisted deformed (Ribbed/ Tor Steel Bar/TMT) Bars Fe 500 grade as per IS 1786-2008, for R.C.C works, where not including in the complete rate of RCC including bending and placing in position complete	172	43.24	Qtl.
172	172	First class burnt brick work laid in cement sand mortar 1:6 in first story upto 4 meter above plingth level	173	62.95	Cum
173	173	Wrought iron and mild steel ladders, framed grills, grating etc. with ends of bars, riveted or welded or forged, framed window guards, barred iron doors, stair case, iron railing including cost of bolts and nuts or screws or welding rod, complete fixed in position.	174	16.92	Qtl.
174	174	Providing & Fixing of 10 gauge welded mesh of 25mm x 25mm size fixed on steel glazing with MS flat 20mm x 6mm beeding complete in all respect including painting two coats with Synthetic Enamel Paint and Priming Coat	175	215.71	Sqm
175	175	Iron grated doors, including pintle hinges and arrangements.	176	2.21	Qtl.
176	176	Applying priming coat with metal primer on new steel or iron work including preparation of surface.	177	94.01	Sqm
177	177	Painting two or more coats with synthetic enamel paints in all shades on old wood work or metallic or plastered or concrete surface to give an even shade including rubbing down old paint.	178	94.01	Sqm
178	178	12.5 mm thick cement plaster 1:4	179	264.77	Sqm
179	179	Finishing walls with acrylic smooth exterior paint of required shade with two or more coats applied @ 1.67 litre/10Sqm over and including base coat of water proofing Cement Paint applied @ 2.20 Kg/10 Sqm	180	264.77	Sqm
180	180	Providing and fixing concertina coil fencing with punched Tape Complete	181	213.75	Mtr
181	181	Cement Concrete 1:6:12 with 40mm gauge stone aggregate. mixing by mechanical means using concrete mixer volumetric type	182	34.21	Cum
182	182	Construction of unreinforced plain cement concrete pavement in M-30 mix design over a prepared sub base with cement contents 350kg per cum and coarse and fine aggregates conforming to IS:383 mixed with concrete mixer using weigh batcher, laid in position over 125 micron thick polythene sheet, compacted with needle vibrator, screed vibrator and plate vibrator, dewatering of free water with vaccum pump, finishing the surface with power floater, including provision of contraction and expansion joints as required, finishing to required lines and grades as per drawings and technical clause 1501 of MORD specifications	183	57	Cum
183	183	ii) PUBLIC HEALTH WORKS	184
184	184	Sub Head-1 Internal Sewerage System	185
185	185	Providing and fixing in position H.C.I. soil waste vent or antisyphonage pipes to I.S.I. specification (IS:1729) of approved make (to the approval of Engineer-in-charge ) including cutting, jointing, wastage, but excluding cost of lead jointing.	186
186	186	b) 100mm i/d H.C.I. pipe lines laid complete	187	30	Mtr
187	187	c) 75mm i/d H.C.I. pipe lines laid complete	188	45	Mtr
188	188	Providing and fixing in position H.C.I specials for soil waste vent or anti syphonage pipes to I.S.I specifications (IS:1729) of approved make (to the approval of Engineer-in-charge) including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining. \na) For 100mm i/d pipes	189
189	189	i) Heal Rest Bend	190	3	Each
190	190	vi )Cowls	191	5	Each
191	191	vii) Collars	192	5	Each
192	192	viii) T/Y junction with door	193	5	Each
193	193	b) For 75mm i/d pipes	194
194	194	HR Bend	195	5	Each
195	195	viii) Collars	196	5	Each
196	196	viii) Cowls	197	5	Each
197	197	viii) Bend Plains	198	5	Each
198	198	viii) T/Y junction with door	199	10	Each
199	199	Providing and fixing H.C.I. Floor traps conforming to I.S.I. Specification (IS:1729) of approved make (to the approval of Engineer-in-charge) of the self cleaning design with C.P. brass hinged grating with frame with or without vent arm and including cement concrete 1:2:4 under and around the floor trap where required upto floor level complete in all respects including cutting and making good the walls and floors,etc. minimum depth of water should be 150mm with a minimum seal 50mm.\na) With 75mm i/d outlet deep seal at Ground Floor	200	10	Each
200	200	Providing & Fixing in position M.S or heavy flat iron clamps made out of M.S flat iron not less than 5 mm of the approved design for fixing C.I. soil waste, vent or antisyhonage pipes to walls complete in all respects including cutting and making good the walls and floors etc. and painting.	201
201	201	a) M.S. Holder bats clamps for 100mm i/d HCI. pipes	202	5	Each
202	202	b) M.S. Holder bats clamps for 75mm i/d HCI . pipes	203	5	Each
203	203	Providing and fixing in position gully traps fixed in cement concrete 1:4:8 complete with Grating 150mm x 150mm, cover and frame clear opening 300mm x 300mm and out of side size 330mm x 330mm and chamber including cost of all bricks work in cement morter 1:5 cement concrete 1:2:4 in coping around cover and frame etc. as per standard design minimum depth of water should be 150 mm with a minimum seal 50mm.\na) 100mm internal Diametre S.W.gully trap with H.C.I. grating and cast iron cover weighing approximately 7.26 kg. and frame clear opening 300mm x 300mm and out of side size 330mm x 330mm	204	4	Each
204	204	Construction of brick masonry inspection chambers size as given below upto 0.60 m average depth in 1:5 cement sand mortar, lime concrete with 40 per cent lime mortar 2:3 in foundation, cement concrete 1:2:4 benching 12.50mm thick cement plaster 1:2 with a floating coat of 1mm thick of neat cement, R.C.C. 1:2:4 slabs 100mm thick cement concrete topping 50mm thick with 455mm x 455mm, 455mm x 610mm inside light duty C.I. inspection chamber cover and frame (Weight as per I.S.I specifications) painted with 3 coats of black bitumastic paint conforming to I.S.I complete as per standard design.\nb) 450mm x 600mm inside with 455mm x 610mm cover and frame light duty double seal	205	4	Each
205	205	Extra for every 0.30 m depth of inspection chamber.\nb) 450mm x 600mm inside	206	4	Each
206	206	Sub Head-2 Internal Water Supply System	207
207	207	Providing ,laying, jointing, fixing and testing ISI Marked G.I. Pipe (as per IS 1239) B-Class Premium make such as (Jindal Hisar) including cost of specials (such as tees, bends, sockets, elbows etc.) ,painting with anti corrosive bitumastic paint, testing, cutting, threading Inside building complete.	208
208	208	a) 15mm i/d	209	35	Mtr
209	209	b) 20mm i/d	210	65	Mtr
210	210	c) 25mm i/d	211	200	Mtr
211	211	Cutting chase in brick walls in cement or in floor for embedding G.I or CI pipes lines and making good the same to its original condition. \nSize 75mm x 75mm	212	300	Mtr
212	212	Cutting holes upto 23cm square through B.B. in cement walls or stone masonary wall in cement for pipes, and making good the same & finishing according to existing finish where required.	213
213	213	a) Through wall 11.43 cm thick	214	10	Each
214	214	b) Through wall 22.86 cm thick	215	10	Each
215	215	Providing, fixing and jointing G.I Union Couplings(of approved make with the approval EIC) as per IS 1879 in G.I. Pipe lines complete in all respect.	216
216	216	a) 15mm i/d G.I. Union	217	10	Each
217	217	b) 20mm i/d G.I. Union	218	10	Each
218	218	c) 25mm i/d G.I. Union	219	4	Each
219	219	Providing, fixing and jointing ISI Marked Gun-Metal peet valves (Heavy Pattern) as per IS 778 with hand wheels, on G.I. Pipe lines laid in the ground or inside buildings including all carriages complete.\n	220
220	220	c) 20mm i/d Gun Metal peet valve heavy pattern.	221	5	Each
221	221	c) 25mm i/d Gun Metal peet valve heavy pattern.	222	5	Each
222	222	Excavation by mechanical means(JCB or Hydraulic excavator) in trenches for pipe lines with straight or open cutting in streets or open area including trimming and dressing sides levelling of beds of trenches to correct grade, cutting joint holes, refilling consolidation,watering , including the cost of dewatering of rain water, diversion for traffic, night signals. providing & fixing caution boards, crossing over trenches for access to the houses, watching, fencing, etc. and removal of surplus soil out side/inside the town involving lead upto 15 meter complete in all respect.\nEarth work upto 1.5 m Depth for	223	40.5	Cum
223	223	Prov. & Fixing water Pump for Lifting water supply to terrace tanks 1.5 BHP capacity Complete in all respect.	224	1	Each
224	224	Sub Head - 3 Sanitary Installation	225
225	225	Providing and fixing in position Chinaware European type water closet P trap or S trap of approved make (to the approval of the Engineer in charge ) consisting of 10 ltr. PVC flushing cistern, PVC short bend 32mm dia including cost of seat cover complete in all respect and to the entire satisfaction of Engineer in charge.	226	3	Each
226	226	Providing and fixing jet spray with 2'-6\" long PVC pipe.With CP Brass nut	227	3	Each
227	227	Providing and fixing in position vitreous Chinaware white large flat back or angular lipped front urinal 610 mm high of approved make (to the approval of the Engineer-in-charge) (610 mm x 410 mm x 380mm) consisting of C.P. waste 32 mm dia and C.P. brass spreader, complete.	228	1	Each
228	228	Providing and fixing partition for different type of urinals.\nVitreous white chinaware partition size large partition 75x16.5x36.5 cm	229	1	Each
229	229	Providing and fixing in position vitreous chinaware white lavatory suites of approved make (to the approval of Engineer-in-charge) consisting of C.P. brass waste 32mm dia with one C.P. brass pillar tap complete in all respect.\nSize 49 cm dia (above counter round)	230	3	Each
230	230	Providing and fixing in position stainless steel sinks of approved make (to the approval of Engineer-in-charge) 1mm thick,grade-304 (18/8) with waste coupling complete in all respect.\na) Size 700mm x 555mm x 230mm (Net size excluding flat edge)	231	2	Each
231	231	Providing & fixing in position PVC flexible tube connection of approved make (to the approval of Engineer-in-charge ) complete in all respect. \n(a) PVC tube connection of size 15 mm x 375 mm with CP Brass nut	232	15	Each
232	232	Providing and fixing PVC waste pipe 32mm complete in all respect.	233	6	Each
233	233	Providing and fixing in position C.P. brass soap dish of approved make (to the approval of Engineer-in-charge ) fixed into wall with rawl plugs and C.P brass screws complete in all respect.	234	4	Each
234	234	Providing & Fixing in postion 15 mm i/d bib cock of approved make (to the approval of Engineer-in-charge )complete in all respect.	235
235	235	i) C.P. brass Bib cock long nose/ long body without flange	236	4	Each
236	236	ii) C.P. brass Bib cock without flange	237	3	Each
237	237	Providing and fixing in position paper holders of approved make (to the approval of Engineer-in-charge ) fixed in to wall with C.P brass screws complete in all respect.\n	238	3	Each
238	238	Providing & Fixing in postion stop cock / Angle valve of approved make (to the approval of Engineer-in-charge ) complete in all respect.	239
239	239	b) C.P.brass 15mm concealed stop cock with flange	240	3	Each
240	240	c) C.P.brass 15mm Angle valve without flange	241	17	Each
241	241	Providing & Fixing in position C.P. Brass flange of approved make (to the approval of Engineer-in-charge ) under various fixtures complete in all respect.	242	25	Each
242	242	Providing & Fixing in position C.P. Brass extension piece 25mm long to 50mm long of approved make (to the approval of Engineer-in-charge )with various fixtures complete in all respect.	243	25	Each
243	243	Providing & Fixing in position 5mm thick bevelled edge mirror of superior glass (of approved make) complete with 4mm thick hard board backing fixed in with rawl plugs 50mm, C.P. brass screws and washers and S/S Studs on top complete in all respect (as required by the Engineer-in- Charge) Size 600mmx450mm	244	3	Each
244	244	Providing and fixing in position vitreous Chinaware white channel of approved make (to the approval of Engineer-in-charge) of size 600 mmx100mm including laying and fixing in cement concrete 1:2:4 complete in all respect.	245	1	Each
245	245	Providing & placing in position on terrace (at all floor levels) HDPE water storage tanks of approved make (to the approval of Engineer -in-charge) with cover with suitable locking arrangement and making necessary holes for inlet, outlet and over flo pipes but without fittings and base support for tank. \nDouble Layer Tanks \n1000 ltr Capacity	246	2000	Litre
246	246	Providing and fixing in position automatic brass Ball Cock in tanks. Brass Ball Cock with rod and Plastic Ball \n25mm i/d	247	2	Each
247	247	Construction of Plateform complete as per specification & as desired by Enginer-in-charge	248	2	Each
248	248	Sub Head-4 Flooring and Wall Tile	249
249	249	Base course of floor consisting of 100mm thick cement concrete 1:8:16 with stone aggregate and 100mm sand filling (Using mechanical mixer for mixing of cement)	250	14.22	Sqm
250	250	Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : a) First layer of slurry of cement @ 0.488 kg /sqm mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours. b) Second layer of slurry of cement @ 0.242 kg/ sqm mixed with water proofing cement compound @ 0.126 kg/ sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.	251	14.22	Sqm
251	251	Providing and laying Rectified Porcelain floor tiles 400x400mm or more (thickness to be specified by the manufacturer) of premium quality conforming to IS:15622 of approved make in all colours laid on 20mm thick bed of Cement Mortar 1:4 (1 Cement : 4 Fine sand) for new flooring complete. Rectified tiles have finished edges allowing them to be placed closer together for a narrower grout joint as opposed to other tiles and are more expensive. Unlike typical factory-edged tile, rectified tile is cut to size after the firing process. This process creates a precise, 90 degree angle edge and, as a result, can be laid with a tighter grout joint than un rectified tile. It gives a smooth, sophisticated and continuous look to the floor. Using a rectified tile allows you to place the tiles much closer together using tighter joint spacing. This makes the grout less visible as there is actually less grout used. When a wide space is used between tiles, the grout becomes a distinct part of the design and if the grout does not blend well with the tiles it can create a less than professional looking finish. In addition, the grout can easily become soiled and discoloured over time and will detract from the look of the tile itself.	252	14.22	Sqm
252	252	Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 200 x 300 mm as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement: 4 fine sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.	253	62.89	Sqm
253	253	Sub Head- 5 Water cooler and Air Conditions	254
254	254	Supply & installation of self contained drinking water cooler with (Non CFC Refrigerant) energy efficient compressor of make USHA, Model No. SRA 60 120 G, cooling capacity Ltrs/hr. 60, storage type capacity 120 Ltrs. Stainless Steel Tank Including installation etc. Complete in all respect as approved and desired by the Engineer-in-charge at site. Make...USHA / Blue Star / Bajaj – or its equivalent.	255	1	Each
255	255	Supply & Erection of automatic voltage stabilizer for storage type water cooler, Wall mounted, Heavy duty, copper wounded with volt meter etc. along with 3 core cord of suitable length and 3 pin power shoe including erection, connection & testing etc. complete in all respect as approved and desired by the Engineer-in-charge at site. Make... V – Guard or its equivalent.	256	1	Each
256	256	Supply & installation of AQUA FLO DX UV Water purification system, capacity 60 ltr. Per hour, 100% chemical free, Dimension 210mm width x 140mm depth x 382mm height, in built voltage stabilizer, Hi Flo, Dual Cartridge including installation etc. Complete in all respect as approved and desired by the Engineer-in-charge at site. Make... EUREKA FORBES/ Kent / Aquasure – or its equivalent.	257	1	Each
257	257	Providing & Installing 5 Star split type wall mounted air conditioner capacity 2.0 tonne Carrier, Hitachi, Voltas, Blue star, Daikin make with 5.00 KVA voltage stablizer , MCB arrangement for installing OD units on terrace including inlet and outlet copper tubes with proper insulation drainage arrangement cable link between ID unit and OD unit. stands for OD unit and concealing of copper pipes and drainage pipe within the building and installing charges complete in all respects.	258	2	Each
258	258	Providing laying hard soft copper concealing of copper pipe of various dia as per requirment and wall thickness 0.8 mm insulated, 4mm electric wire sheathed 3 care double insulated / taping laying in chase cutting of wall and reparing the same within the building and installing charges complete in all respect.\nFor 2.0 tonne split AC	259	20	Mtr
259	259	Providing, laying, jointing, fixing and testing uPVC Pipe with G.I. specials as per ISI-4985, including cost of G.I. specials such as tees, bends, sockets, elbows etc. testing inside building complete.\nb) 25mm i/d	260	20	Mtr
260	260	Estate Sewer Network	261
261	261	Providing, laying intrenches to correct gradient and alignment and jointing of UPVC pipe having ISI specifications IS:15328-2003 class SN-8 marked marke supreme, Finolex, Kisan, Jain, Prince or equipm\lent good on them and laying the same in trenches to correct alignment and gradinets, cutting and jointing, testing for water tightness and making good the leakages and defect including cost of specials complete in all respects.\nc) 160 mm i/d pipes	262	120	Mtr
262	262	Excavation in trenches with straight or open cutting in streets lanes or in open area with 3D / JCB or excavator including manually dressing bed, triming side slopes for sewers manholes to full depths as shown in drawings, including shoring, dressing to correct sections and dewatering providing for diversion for traffic, protection of existing services i.e. telephone cables ,electric lines, water supply lines and gas lines etc. night signals, profiles, pegs, sight rails, boning rods, fixing and maintenance of caution boards, fencing, refilling trenches, watering, ramming and restoration of surface to original level and removal of surplus spoils from the site of works upto 15 metre complete in all respects. \nA) For depths not exceeding 3.0 metre B.G.L.\na) For all classes of soil except rocky	263	132.62	Cum
263	263	Providing & filling sand grading as per specifications or fire grade around the various of UPVC pipes in enternal work.\nFor covering Sewer Line Type I	264	15.06	Cum
264	264	Constructing brick masonry manhole in cement mortar 1:5 ( 1 cement : 5 coarse sand ) R.C.C. top slab 20cm thick using M-20 mix by using mixer and vibrator, TMT Fe500 @ 63.464 kg/per cum, foundation concrete 1:4:8 mix (1 cement: 4 coarse sand : 8 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement: 3 coarse sand) finished with floating coat of neat cement and making 40mm thick benching in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement, Orange coloured PVC steps including RCC cover with frame complete as per standard design complete in all respects.	265
265	265	a) Inside size 75x120 cm with depth 120 cm between bottom of top slab and invert ( with MH cover & frame Heavy duty)	266	3	Each
266	266	a) Inside size 90x150 cm with depth 120 cm between bottom of top slab and invert ( with MH cover & frame Heavy duty)	267	2	Each
267	267	Fire Fighting Arrangements	268
268	268	Excavation by mechanical means(JCB or Hydraulic excavator) in trenches for pipe lines with straight or open cutting in streets or open area including trimming and dressing sides levelling of beds of trenches to correct grade, cutting joint holes, refilling consolidation,watering , including the cost of dewatering of rain water, diversion for traffic, night signals. providing & fixing caution boards, crossing over trenches for access to the houses, watching, fencing, etc. and removal of surplus soil out side/inside the town involving lead upto 15 meter complete in all respect.\nEarth work upto 1.5 m Depth for	269	81	Cum
269	269	Providing, laying, fixing, testing and commissioning of 'C' Class heavy duty MS Pipe conforming to Indian Standard IS : 1239/3589 including fittings like tees, bends, sockets, elbows, flanges, tapers, nuts bolts, gaskets etc. in ground with anti corrosive treatment with wrapping coating tape (4mm pypkote tape) as per IS : 10221 including cost of primer etc. excluding cost of excavation and refilling complete in all resepcts.\nc) 100 mm internal diameter	270	200	Mtr
270	270	Supplying, Laying, Testing and Commissioning of ISI marked BUTTERFLY VALVE PN 1.6, with Gun metal seal duly ISI marked complete with rubber insertion, nuts, bolts and washers, matching flanges of required thickness, etc. complete as per specifications.\nc) 100mm dia	271	4	Each
271	271	Supplying, Installation, Testing and Commissioning of RRL FIRE hose Type A, IS:636, 63mm dia x 15m long with gunmetal male & female couplings (ISI marked) bound & riveted to hose pipes with copper rivets and copper wire as required.	272	8	Each
272	272	Supplying, Installation, Testing and Commissioning of First Aid-fire Hose reel with MS construction spray painted in post office red, confirming to IS 884 with upto date amendments, complete with rubber hose pipe (IS:444/1987) 20mm dia 30 meter long type-2, hose reel Drum with bracket as per IS:884, 20mm dia GM nozzle and 20mm dia GM gate valve as required complete with G.I pipe connention with main pipe complete in all respect.	273	4	Each
273	273	Supplying, Installation, Testing and Commissioning of weather proof cabinet for hose fabricated out of 1.6mm thickness M.S. sheet with front glass door having locking arrangement, suitable to accommodate all the necessary pipes, accessories, fittings etc including painting the metal portion with one coat of ready mixed primer paint and two coats of synthetic enamel paint of approved shade and quality, sign writing etc.\na) 900 mm wide x 600 mm high x 500 mm deep Size (for Yard Hydrant)	274	4	Each
274	274	Supplying, Installation, Testing and Commissioning of G.M Single headed hydrant valve with instantaneous Gun metal peet coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (TypeA) with blank Gunmetal Cap and chain including orifice plate made of 6mm th Stainless steel to keep the pressure not more than 3.5 per sqcm at any point complete in all respects.	275	4	Each
275	275	Supplying, Installation, Testing and Commissioning 63 mm dia gun-metal Branch Pipe (ISI marked) with 20mm (nominal internal dia) size Gun metal nozzle confirming to IS 903, suitable for instantaneous connection to interconnect hose pipe coupling as required.	276	4	Each
276	276	Providing and fixing S.S Pressure Gauge complete as required complete in all respect.\na) Dial diameter 150mm calibration 0-16 Kg	277	4	Each
277	277	Providing and fixing of FIRE EXTINGUISHER CO2 type as per IS:15683 complete with all accessories as per manufactures sepcification. ISI Mark Complete in all respect.\n4.5kg capacity	278	75	Each
278	278	Providing and fixing of FIRE EXTINGUISHER ABC powder type (Stored pressure) as per IS:15683 complete with all accessories as per manufactures sepcification. ISI Mark Complete in all respect.\n6kg Capacity	279	25	Each
279	279	Providing & Fixing of ABC type ceiling Modular Fire Extinguisher, Cap 10 Kg. complete in all respect. Make: Shoot Fire,Agni Guard,Padmini,Minmax.	280	105	Each
280	280	iii) ELECTRICAL WORKS	281
281	281	RECESSED PVC CONDUIT PIPE WIRING SYSTEM WITH MODULAR SWITCHES:-\nWiring in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100volts grade to be laid in heavy gauge PVC conduit pipe 20mm/ 25mm dia. (ISI Marked) recessed in wall etc., complete with powder coated/anodized concealed metal boxes (1.6mm thick with Brass lugs) required for suitable number of modules (Modular accessories) for having Step type electronic fan regulators (two module) 100watts, bell push, 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined/ universal Socket (shuttered), 6/10Amp. Switches, 16/20Amp. switches with indicator etc. and covered with Frame Plate etc., PVC connector (For Fan Box and Call Bell), Steel Hooks, Sheet metal fan box (1.6mm thick shape hexagonal), Circular junction Boxes (Four way PVC 1½\" deep for walls and CI 3\" deep for ceiling), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plug control point) and other petty material etc., including the cost of above material, cutting and filling up of chases (with finishing the surface):-\n	282
282	282	i)-b Wiring fan point (With fan box)	283	148	Each
283	283	ii) Wiring light point	284	264	Each
284	284	iii) Wiring call-bell point	285	1	Each
285	285	iv) Wiring 6Amp. wall socket point	286	6	Each
286	286	v) Wiring 6Amp. Plug control comprising wall socket point	287	14	Each
287	287	vi) Wiring 16/20Amp. power plug control point	288	14	Each
288	288	viii) Wiring light point with double control switches.	289	4	Each
289	289	RECESSED AIR CONDITIONER SUPPLY TERMINAL POINT (USED FOR HGW, PVC CONDUIT & HDPE PIPE WIRING SYSTEM WITH MODULAR ACCESSORIES):-\nWiring air conditioner supply terminal point recessed in wall etc., complete with powder coated/anodized concealed metal boxes required for suitable number of modules (Modular accessories) for having 25Amp. combined/ universal Socket (shuttered) and modular motor starter 25Amp. (2Module), covered with Frame Plate and other petty material etc. including the cost of above material, cutting and filling up of chases (with finishing the surface):-\nWiring AC supply terminal point having 1No. 25Amp. universal Socket (shuttered) erected at AC height and 1No. Motor starter 25Amp. erected at switchboard height.	290	2	Each
290	290	RECESSED COMPUTER SUPPLY TERMINAL POINTS (USED FOR HGW, PVC CONDUIT & HDPE PIPE WIRING SYSTEM WITH MODULAR ACCESSORIES):\nWiring Computer supply terminal points recessed in wall etc., complete with powder coated/anodized concealed metal boxes required for suitable number of modules (Modular accessories) for having 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined/ universal Socket (shuttered), 6/10/16/20Amp. Switches and blanking plate etc., and covered with Frame Plate and other petty material etc. including the cost of above material, cutting and filling up of chases (with finishing the surface):-\na) Wiring Computer terminal point having 3 Nos. 6Amp. 2/3 universal socket (shuttered), 1No. 16 Amp. switch with indicator and 1No. blanking plate (Modular accessories).	291	1	Each
291	291	Supply and erection of TV socket, Telephone socket and Networking socket points in powder coated/anodized concealed metal boxes recessed in wall required for suitable number of modules (Modular accessories) for having TV sockets, Telephone sockets RJ11 & Networking socket RJ45 (one module), covered with Frame Plate and other petty material etc., including the cost of above material, cutting and filling up of chases (with finishing the surface):-	292
292	292	b) Wiring Telephone socket point RJ11 (one module)	293	1	Each
293	293	c) Wiring Networking socket point RJ45 (one module)	294	1	Each
294	294	PVC INSULATED FR COPPER CONDUCTOR CABLES:\nSupply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:-	295
295	295	i) Overall size 1sq.mm (Un-sheathed)	296	260	Mtr
296	296	ii) Overall size 1.5sq.mm (Un-sheathed)	297	50	Mtr
297	297	iii) Overall size 2.5sq.mm (Un-sheathed)	298	550	Mtr
298	298	iv) Overall size 4sq.mm (Un-sheathed)	299	100	Mtr
299	299	v) Overall size 6sq.mm (Un-sheathed)	300	1200	Mtr
300	300	vi) Overall size 10sq.mm (Un-sheathed)	301	40	Mtr
301	301	XLPE INSULATED ARMOURED CABLES (LOOSE):\nSupply, laying and erection of aluminium conductor XLPE insulated PVC sheathed armoured and served cable 1100 volts grade as per IS 7098 (Part-1)1988 to be laid loose in the existing trench or pipe as per PWD General Specifications:-\nxxv) Overall size 70sq.mm (3½ Core) Armoured (Loose)	302	300	Mtr
302	302	XLPE INSULATED ARMOURED CABLES (ON SURFACE):\nSupply, laying and erection of aluminium conductor XLPE insulated PVC sheathed armoured and served cable 1100 volts grade as per IS:7098 (Part-1)1988 to be laid (On Surface) as per PWD General Specifications:-\nE-ii) Overall size 10sq.mm (2Core) Armoured (On-Surface)	303	200	Mtr
303	303	HEAVY GUAGE WELDED CONDUIT PIPES:-\nSupply & erection of Heavy guage welded conduit pipe (ISI marked) as per IS:9537:Part-II for wiring purposes including bends, junction boxes, Steel hooks, GI saddle clamps and other petty materials etc., where necessary including painting as per PWD General Specifications:-\nxi) Supply & erection of 19/20mm dia. M.S. conduit pipe (1.6mm thick), White painted suspension rod for ceiling fan.	304	147	Mtr
304	304	PVC, HDPE PIPES & PVC FLEXIBLE PIPES:\nSupply & erection of PVC Conduit Pipes (ISI marked) as per IS9537:Part-III & HDPE pipes (ISI marked) as per IS:4984:1995 for wiring purposes including bends, junction boxes, Steel hooks, M.S. saddle clamps and other petty materials etc., as per PWD General Specifications:-	305
305	305	vii) Heavy Gauge PVC Conduit Pipe 25mm dia. (Flushed)	306	350	Mtr
306	306	viii) Heavy Gauge PVC Conduit Pipe 32mm dia. (Flushed)	307	50	Mtr
307	307	ix) Heavy Gauge PVC Conduit Pipe 40mm dia. (Flushed)	308	220	Mtr
308	308	Supply and erection of PVC flexible pipe complete without compression glands, locking arrangement, check-nuts as required:-\nxxb) PVC Flexible Pipe 25mm dia.	309	50	Mtr
309	309	COPPER EARTHING (Upto 14 metre in Length):\nEarthing with electrolytic Copper Tape rivetted (with 5Nos. copper rivets)/Steel Nut & bolts (with 4Nos. 32mm long, 8mm thick with washer and double nut) to 30cm x 120cm x 2mm thick copper plate (made cylindrical) burried 10.50 metre (34.44 feet) below ground level in the hole of excavation having bore dia. 125mm and surrounded by salt & charcoal dust mixture (20 kg.) including fixing the Copper Tape recessed in wall and in floor etc., up to 14metre in Length (including bore Length). G.I. pipe 20mm dia. (A-class), 9metre long should be laid in the hole of excavation 1 feet below ground level and having GI Reducer 50mm x 20mm with PVC Cap (For pouring water) fixed on the top level of the pipe. 300mm x 300mm x 300mm deep haudi of First class bricks finished with 1:4 cement plaster and haudi covered with cast iron lid having size 300mm x 300mm (Heavy) around the hole of excavation:-\na) Earthing with 20mm x 3mm Copper Tape (upto 14Metre in Length)	310	2	Each
310	310	COPPER EARTHING STRIP (As Additional Length):\nFixing additional Length of earthing with Copper Tape (On Surface/Flushed) with petty material as required etc.:-\na) Additional Length 20mm x 3mm thick Copper Tape	311	20	Mtr
311	311	MINIATURE CIRCUIT BREAKERS:\nSupply and erection of Miniature Circuit Breaker MCB's for circuit protection against overload and short circuit current fault suitable for 240/ 415 volts 50cycles AC supply with breaking capacity of 10kA, Curve-C and low watt losses as per IS/IEC 60898-1, energy limitation class-3, true contact indication, label holder facility in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs:-	312
312	312	ii) MCB Single Pole 6-32amp. (10kA, Curve-C)	313	98	Each
313	313	vi) MCB Double Pole 6-32amp. (10kA, Curve-C)	314	3	Each
314	314	xii) MCB Triple Pole 50, 63amp. (10kA, Curve-C)	315	6	Each
315	315	xiv) MCB Four Pole 6-32amp. (10kA, Curve-C)	316	1	Each
316	316	xvi) MCB Four Pole 50, 63amp. (10kA, Curve-C)	317	8	Each
317	317	SHEET METAL DOUBLE DOOR DISTRIBUTION BOARD FOR MCB's/ RCBO's/ RCCB's:\nSupply and erection of sheet metal Double Door Distribution Boards IP 43- IK09 metal door (dust protected) as per IS 8623-1&3, IEC 61439-1&3 suitable for flush mounting with fully insulated copper busbars, shrouded neutral bars, earth bars, cement spill protector, color- coded interconnecting wire set, cable ties, blanking plates and circuit identifications label and of required no. of ways for mounting miniature circuit breakers/ RCBO's/ RCCB's in the distribution board (For SP&N distribution board with provision DP MCB's/ RCCB's/ RCBO's as incomer and SP MCB's as outgoings and for TP&N horizontal distribution board with provision TPN/ FP MCB's/ RCCB's/ RCBO's as incomer and SP MCB's as outgoings) as per PWD General specifications including connections with suitable size of thimbles and bonding to existing earth etc:-\n	318
318	318	i) SP&N Double Door Distribution Board 4 way each	319	1	Each
319	319	ii) SP&N Double Door Distribution Board 8 way each	320	1	Each
320	320	v) TP&N Horizontal Double Door Distribution Board 4 way each	321	8	Each
321	321	Supply and erection of sheet metal double door vertical distribution boards IP 43-IK09 metal door (dust protected) as per IS:8623-1&3, IEC 61439-1&3 suitable for flush mounting with fully insulated copper busbars for each phase, 2 Nos. shrouded neutral bars, 2Nos. earth bars, cement spill protector, color-coded interconnecting wire set, cable ties, blanking plates and circuit identifications label and of required no. of ways for mounting MCCB's as incomer and outgoings SP/TP miniature circuit breakers in the distribution board as per PWD General specifications including connections with suitable size of thimbles and bonding to existing earth etc.:-\nb) TP&N Double Door Vertical DB's 8 way each (With provision of FP MCCB upto 125amp.)	322	1	Each
322	322	ON LOAD CHANGEOVER SWITCH (With Sheet Enclosure):\nSupply and erection of On Load Change over Switch with advance neutral UNIT in sheet enclosure on the existing surface. (Confirms to IS 13947 (Part-3). complete with G.I. Bolts, Nuts etc. according to the size of holes in the body of the enclosure & Connections on both sides of switch with suitable size of thimbles as per PWD General Specifications:-\nii) On Load Change Over Switch Four Pole 100amp., 415volts (With Sheet Enclosure)	323	1	Each
323	323	MCCB's (MOULDED CASE CIRCUIT BREAKER):\nSupply and erection of Moulded Case Circuit Breaker (Panel mounting Cubical type) in the existing Cubical Panel (confirm to IEC:60947-2) having Ics=100% Icu, 100% neutral with spreader links and relevant PWD general specifications complete with G.I. Bolts, Nuts & Connection on both sides of MCCB with suitable size of thimbles etc:-\niii) MCCB Four Pole 125amp., 415volts, =25kA Fixed Magnetic and Adjustable Thermal Setting	324	2	Each
324	324	DOUBLE WALLED CORRUGATED (DWC) HDPE PIPES:\nSupply and erection of Double Walled Corrugated (DWC) HDPE pipe to be laid 1mtr. below ground level including excavation placing the pipe in position and back filling with excavated soil etc. of the required size:-\niii) Double Walled Corrugated HDPE Pipe 90/76mm (Outer/ Inner dia.)	325	300	Mtr
325	325	SHEET METAL CUBICAL PEDESTAL, TOWER STRUCTURES, HT & LT LINE ITEMS, MS CHANNELS, BRASS GLANDS, ALUMINIUM & COPPER THIMBLES: CUBICAL PEDESTAL:\ni) Supply and erection of Sheet metal cubical pedestal made from 50mmx50mmx6mm thick MS angle iron frame with 5 sides welded & covered with MS sheet 2mm thick & front side hinged with 4\" hinges & locking system with single/ double door openable placed on MS strip of size 12.5mm x 2.5mm thick welded with MS sheet, 4Nos. legs of 50mmx50mmx6mm thick MS angle iron each of 600mm long with MS sheet 100mmx100mmx6mm thick at the bottom end of the legs. Front door welded x-sectionally with MS flat 25mmx5mm. The front side with MS sheet each 75mm wide & a bend of 75mm width outwards & inwards on all sides with tappered top 200mm high and pedestal with 4 Nos. supporting members each of MS flat 50mmx6mm thick according to cubical size duly welded & complete pedestal to be painted with 1 coat of red oxide & 2 coats of paint & bonding to the existing earth. The Pedestal platform should be filled with 1:2:4 cement concrete mixture and erected 150mm high from the top of the cement concrete platform. The job is to be completed as approved by Engineer-in-charge:-\na) Cubical Size 900mm high, 600mm wide and 350mm deep with platform dimensions 700mm x 450mm x 450mm	326	1	Each
326	326	Supply and erection of LED batten 20watt LED (including LED driver) with High quality extruded aluminium with efficacy of LED fixture more than 100 lumens per watt and operating voltage between 140 to 270 volt, input AC frequency 50 Hz ± 1 % complete along with erection of the same with connections, testing etc. complete in all respects as approved and desired by the Engineer-in-charge at site.LED Fitting as per Specifications approved by Hon. Tech. Advisor to CM Punjab vide Letter no ATPB/20/GL Dated 30/11/2017. Make: Jaquar LGLZ01X020XC / Philips BN02IC LED20S PSU CW GR/ Havells ENDURALINEARNEOBS20WLED830SPCWH, Crompton:-LDL-20-CDL,WIPPRO:-LL20-221-XXX-65 ALI, C&S:- LTTB4F20WLED/W	327	32	Each
327	327	Supply and erection of LED batten 40watt LED (including LED driver) with High quality extruded aluminium with efficacy of LED fixture more than 100 lumens per watt and operating voltage between 140 to 270 volt, input AC frequency 50 Hz ± 1 % complete along with erection of the same with connections, testing etc. complete in all respects as approved and desired by the Engineer-in-charge at site.LED Fitting as per Specifications approved by Hon. Tech. Advisor to CM Punjab vide Letter no ATPB/20/GL Dated 30/11/2017. Make:- WIPRRO:- LL24-541-XXX-57-CD,BAJAJ Cat No. BCLAB40W ,JAQUAR CAT NO. LGLZ01X040XC, PHILLIPS Cat no:-BN108C LED 40 S PSU CDL WH , CROMPTON:-LDL-40-CDL,C&S:-LTTB4F40WLED /W,HAVELLS:- STOUTPLUS1200BS40WLED840SPCWH	328	227	Each
328	328	Supply and erection of Ceiling Fan 1200mm (FIVE STAR), 48\" with double ball bearing including flexible wire & petty material etc. for connections and testing . complete in all respects as appd. and desired by the Engineer in-charge at site. Makes:- Crompton Entrust 50-5 Star Opel White/ Havell's ES-50/ ANCHOR:-Panta Turbo Star code 13671WH / V-Guard Coolgate 5 Star 48, Halonix:- Zephyr(ISI With 5 Star Rating)	329	148	Each
329	329	Supply and erection of wall fan plastic body 400mm, 16\" including flexible wire & petty material etc. for connection connections, testing etc. complete in all respects as approved and desired by the Engineer-in-charge at site. Make:- Crompton WM 16\"(High Speed)/ Havells's D'Zire/ Anchor Wall HS.	330	1	Each
330	330	Supply and erection of plastic body 250mm, 10\" Ventialtion Fan including flexible wire & petty material etc. for connection connections, testing etc. complete in all respects as approved and desired by the Engineer-in-charge at site. Make:- Crompton Ventilus 10\"/ Havells's Ventil Air - DX White/ Anchor - Smart Air-10\".	331	5	Each
331	331	Supply and erection of 120W Flood light (Including LED Driver), Pressure Die Cast Aluminium With efficancy of LED Fixture more than 100 lumens per watt and operating voltage between 140 to 240V input ac Supply frequency 50Hz +-1% complete along with erection of the same with connection, testing etc. complete in all respects as approved and desired by the Engineer-in-charge at site Make:- Jaquar LFLDO2S0120XC, Philips BVP122LED 124CW HE AK55 FG XTFCLS4 / Crompton LFLN-120-CDL/60-M/ Havells JETAIRISFLS120WLEDASYMLTG/ WIPRO LF20-132-060-57-G2.	332	8	Each
332	332	D-2) Providing Instalation of Fire Alaram System	333
333	333	Supply & erection of 4 Zone Fire Alarm Panel Make Agni Suraksha/NATIONAL/Honeywell System sensor with following feature:- Operates on 230 V AC, 50 Hz AC supply, Battery backup with built in charger battery backup with built in charger, Fire / fault status in unambiguous colour LED indications,16 x 2 line dot matrix LCD display , Zone wise fire, open, short LED indications., External s/w to test each zone fire, open, short status manually., External s/w for reset, Silence, Lamp test., Zone isolation facility with loop voltage cut off., Mains on, System On, Charger on, visual indications. Battery Low& Common fire indications , Attachable with all types of fire detectors.. The panel should be wall mounted and suitable locking arrangement in red/gray color as per IS 2189- 1988 amended up to date and must confirm to various tech. Parameter.coplete in all respect as desired by Engineer in charge at site	334	1	Mtr
334	334	Supply & erection of Photoelectric Smoke Detector, low current draw, wide operating voltage, LED detector status indicator, Programmable sensitivity, automatic drift compensation Tested and approved to EN54-7:2000 complete in all respect as desired by the engineer in charge at site.Make- System Sensor/National	335	70	Each
335	335	Supply & erection of electrical hooter operational with DC 24 Volts, sounder output 80 db @ 1 meter and 2 core wiring complete in all respect as desired by the engineer in charge at site.Make- National/ Agni Suraksha/System Sensor	336	5	Each
336	336	Supply & erection of C.F.L./L.E.D. type Fire Exit Glow sign for the evacuation at the time of emergency having 220VAC/ 6VDC power supply complete in all respect as desired by the engineer in charge at site. Make- National/ Agni Suraksha	337	5	Each
337	337	Supply & erection of Glass break manual call point complete in all respect as desired by the engineer in charge at site. Make- National/ Agni	338	5	Each
338	338	PVC INSULATED FR COPPER CONDUCTOR CABLES:\nSupply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:-\nii) Overall size 1.5sq.mm (Un-sheathed)	339	1000	Mtr
339	339	HEAVY GAUGE WELDED CONDUIT PIPES:\nSupply & erection of Heavy guage welded conduit pipe (ISI marked) as per IS:9537:Part-II for wiring purposes including bends, junction boxes, Steel hooks, GI saddle clamps and other petty materials etc., where necessary including painting as per PWD General Specifications:-\nvii) HGW Conduit Pipe 25mm dia. (1.6mm thick) Flushed	340	400	Mtr
340	340	D-3) Supply, Erection, Testing and Successful Commissioning of Diesel Generating Set 50 K.W. / 62.5 KVA	341
341	341	Supply, Erection, Testing and Commissioning of 62.5 KVA / 50 KW LIQUID COOLED SILENT Diesel Generating set with silent canopy without AMF panel KOEL GREEN Make Diesel Engine Model 4R810TAG1 (CPCB NORMS COMPLIANCE) (CPCB-II) developing 83 BHP at 1500 rpm, water cooler Four cylinder, four stroke, electric start, conforming to BS 5514 with overload capacity of 10% for one hour in twelve hours duration. 62.5 KVA Synchronous Brushless alternator of KOEL Green Make suitable for continuous operation at 1500 RPM developing 415 volts at 0.8 p.f. (lag) suitable for 50 Hz, Three Phase, 4 wire system. The alternator shall be brushless type, self excited & self regulated. The alternator will be suitable for tropical climate and shall conform to IS: 4722. with electronic governer. Engine make: KOEL GREEN /Cummins/Greaves and Alternator Make: KOEL GREEN/ Stamford Crompton / Loray somer with sound proof accoustc enclosure , Echo Friendly ( CPCB-II norms approved). The Generator set should be installed on the RCC plinth of required size (Plinth cost included in the said rates) complete in all respects as approved and desired by the Engineer in charge at site	342	1	Job
342	342	XLPE INSULATED ARMOURED CABLES (LOOSE):\nSupply, laying and erection of aluminium conductor XLPE insulated PVC sheathed armoured and served cable 1100 volts grade as per IS 7098 (Part-1)1988 to be laid loose in the existing trench or pipe as per PWD General Specifications:-\nxxiv) Overall size 50sq.mm (3½ Core) Armoured (Loose)	343	70	Mtr
343	343	COPPER EARTHING (Upto 14 metre in Length):\nEarthing with electrolytic Copper Tape rivetted (with 5Nos. copper rivets)/Steel Nut & bolts (with 4Nos. 32mm long, 8mm thick with washer and double nut) to 30cm x 120cm x 2mm thick copper plate (made cylindrical) burried 10.50 metre (34.44 feet) below ground level in the hole of excavation having bore dia. 125mm and surrounded by salt & charcoal dust mixture (20 kg.) including fixing the Copper Tape recessed in wall and in floor etc., up to 14metre in Length (including bore Length). G.I. pipe 20mm dia. (A-class), 9metre long should be laid in the hole of excavation 1 feet below ground level and having GI Reducer 50mm x 20mm with PVC Cap (For pouring water) fixed on the top level of the pipe. 300mm x 300mm x 300mm deep haudi of First class bricks finished with 1:4 cement plaster and haudi covered with cast iron lid having size 300mm x 300mm (Heavy) around the hole of excavation:-\na) Earthing with 20mm x 3mm Copper Tape (upto 14Metre in Length) Copper Earthing strip Va Additional Length 20mmx3mm thick copper tape.	344	4	Each
344	344	DOUBLE WALLED CORRUGATED (DWC) HDPE PIPES:\nSupply and erection of Double Walled Corrugated (DWC) HDPE pipe to be laid 1mtr. below ground level including excavation placing the pipe in position and back filling with excavated soil etc. of the required size:-\n	345	10	Mtr
345	345	ii) Double Walled Corrugated HDPE Pipe 63/51mm (Outer/ Inner dia.)	346	60	Mtr
346	346	D-4) Providing Instalation of CCTV System	347
347	347	S/E OF IP DOME CAMERA 3MP Full HD1080 output IP technology True day / night DNR, Smart IR DNR, Smart IR Up to 20-30m IR distance IP66 weatherproof, PoE support, SD Card Storage, 6mm Fixed lens complete in all respect as desired by the engineer in charge at site. Make- MATRIX/CBC/HONEYWELL	348	16	Each
348	348	S / E OF IP BULLET CAMERA 3MP Full HD1080 output IP technology True day / night DNR, Smart IR DNR, Smart IR Up to 20-30m IR distance IP66 weatherproof, PoE support, SD Card Storage, 6mm Fixed lens complete in all respect as desired by the engineer in charge at site. Make- MATRIX/CBC/HONEYWELL	349	4	Each
349	349	S /E of 16 Channel IP INPUT NVR with H.265 & Four-stream video compression Support HD-IP cameras with adaptive access Full channel@1080P resolution real-time recording, HDMI and VGA output at up to 1920×1080P resolution, ONVIF, 2 Gigabit Ports, Playback at 1080P resolution up to 8-ch synchronous complete in all respect as desired by the engineer in charge at site. Make MATRIX/CBC/HONEYWELL	350	2	Each
350	350	S/E of CAT 6 UTP Networking Cable of 10/100/1000Mbps DCC in existing PVC conduit complete in all respect as desired by the engineer in charge at site. Make D-Link/Digi-Link/AMP	351	1000	Mtr
351	351	S/E of 4000GB Audio Video HDD for DVR recording and playback complete in all respect as desired by the engineer in charge at site. Make- Toshiba/ Seagate	352	2	Each
352	352	S/ E of 16 port PoE 180+watts Web Managed Gigabit 10/100 Mbps Smart Data Switch With 2 Combo 10/100/1000 MBPS Copper & SFP Port complete in all respect as desired by the engineer in charge at site. Make CISCO/Netgear/Extreme/JUNIPER	353	2	Each
353	353	S /E of 43” COMMERCIAL LED PANNEL with 2 HDMI Port, VGA Input, in built speaker, min. 50000 hours panel life, computer input, TV INPUT complete in all respect as desired by the engineer in charge at site. Make-Panasonic/LG/Samsung	354	1	Each
354	354	S /E of 6U Wall mount 19’’ Rack with glass door,lock & key facility 450mm-550mm depth with CPD, Cable Manager & Fan. Make: D-Link/Comrack/Netrack	355	1	Each
355	355	S /E of 12U Wall mount 19’’ Rack with glass door,lock & key facility 450mm-550mm depth with CPD, Cable Manager & Fan. Make: D-Link/Comrack/Netrack	356	1	Each
356	356	S /E of 2 meter long superior quality HDMI Cable complete in all respect as desired by the engineer in charge at site. Make Standard	357	1	Each
357	357	S / E of RJ-45 Male connector complete in all respect as desired by the engineer in charge at site. Make D-Link/Digi-Link/AMP	358	40	Each
358	358	S / E of 1KVA LIT sine wave UPS/ Power Plant with SMF batteries having 30 Minutes backup time. Make-APC/NUMERIC/BPE	359	1	Each
359	359	PVC, HDPE PIPES & PVC FLEXIBLE PIPES:\nSupply & erection of PVC Conduit Pipes (ISI marked) as per IS9537:Part-III & HDPE pipes (ISI marked) as per IS:4984:1995 for wiring purposes including bends, junction boxes, Steel hooks, M.S. saddle clamps and other petty materials etc., as per PWD General Specifications:-	360
360	360	Heavy Gauge PVC Conduit Pipe 25mm dia. (Flushed)	361	1000	Mtr
361	361	Heavy Gauge PVC Conduit Pipe 32mm dia. (Flushed)	362	20	Mtr
362	362	D-5) Supply, Erection, Testing and Successful Commissioning of Goods cum Passenger lift	363
363	363	Supply, Erection, Testing and Successful Commissioning of 1 No.Goods cum Passenger Elevator (Geared, with Machine Room) of capacity about 2000 KG as per specifications mentioned below: \nPRODUCT : 7-2T, DETAILS : 7-2T, CAPACITY (kgs) : About 2000 kgs, SPEED (mps) : 1 mps, RISE (m) : 13 m, STOPS : 4 Stops With (all opening on the same side) (G,1,2,3), POWER SUPPLY : 400/415 Volts (3 Phase AC), OPERATION : Full collective operation, CAR GROUP : One car (simplex), MACHINE : Geared (Located in Machine room above the shaft), TRACTION MEDIA : Steel Ropes, CAR ENCLOSURES : SS Panels, FALSE CEILING TYPE : CD-35 SS, FLOORING : Steel Chequered Plate, CAR DOOR FINISH : Stainless Steel #4(Hairline), LANDING DOORS FINISH : Stainless Steel #4(Hairline), HOISTWAY DIMENSIONS Required (W x D – mm) : 2700mm W x 2850 mm D approx.( required hoist way ), CAR DIMENSIONS (W x D x H - mm) : 1800 mm W x 2300 mm D x 2200 H approx., CAR & HOISTWAY DOOR TYPE : Telescopic (2SP) doors, DOOR OPENING (W x H - mm) : 1200 mm W x 2000 mm H, HALL FIXTURE FACE PLATE : Stainless Steel #4(Hairline), STANDARD FEATURES : Combined luminous Hall Buttons with Seven Segment Digital hall, Position Indicators at all floors, Car Operating Panels with Luminous, Buttons and digital Car position Indicators, Emergency Firemen’s, Service, Emergency Car Light Unit, Emergency Alarm Button, OPTIONS REQUIRED : Automatic Rescue Device , voice synthesizer, Intercom, (Make:- OTIS, Thyssen, Kone)	364	1	Each
364	364	XLPE INSULATED ARMOURED CABLES (LOOSE):\nSupply, laying and erection of aluminium conductor XLPE insulated PVC sheathed armoured and served cable 1100 volts grade as per IS 7098 (Part-1)1988 to be laid loose in the existing trench or pipe as per PWD General Specifications:-\nxxii) Overall size 25sq.mm (3½ Core) Armoured (Loose)	365	50	Mtr
365	365	COPPER EARTHING (Upto 14 metre in Length):\nEarthing with electrolytic Copper Tape rivetted (with 5Nos. copper rivets)/Steel Nut & bolts (with 4Nos. 32mm long, 8mm thick with washer and double nut) to 30cm x 120cm x 2mm thick copper plate (made cylindrical) burried 10.50 metre (34.44 feet) below ground level in the hole of excavation having bore dia. 125mm and surrounded by salt & charcoal dust mixture (20 kg.) including fixing the Copper Tape recessed in wall and in floor etc., up to 14metre in Length (including bore Length). G.I. pipe 20mm dia. (A-class), 9metre long should be laid in the hole of excavation 1 feet below ground level and having GI Reducer 50mm x 20mm with PVC Cap (For pouring water) fixed on the top level of the pipe. 300mm x 300mm x 300mm deep haudi of First class bricks finished with 1:4 cement plaster and haudi covered with cast iron lid having size 300mm x 300mm (Heavy) around the hole of excavation:-\na) Earthing with 20mm x 3mm Copper Tape (upto 14Metre in Length)	366	2	Each
366	366	COPPER EARTHING STRIP (As Additional Length):\nFixing additional Length of earthing with Copper Tape (On Surface/Flushed) with petty material as required etc.:-\na) Additional Length 20mm x 3mm thick Copper Tape	367	70	Mtr
367	367	DOUBLE WALLED CORRUGATED (DWC) HDPE PIPES:\nSupply and erection of Double Walled Corrugated (DWC) HDPE pipe to be laid 1mtr. below ground level including excavation placing the pipe in position and back filling with excavated soil etc. of the required size:-\nii) Double Walled Corrugated HDPE Pipe 63/51mm (Outer/ Inner dia.)	368	40	Mtr

Need a Bussiness Loan? Apply Now!
Buy Digital Signature
Bidding Support

Also Visit

Tenders

Punjab Tenders

Construction Tenders

Building Construction Tenders

Godown Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Construction Of Warehouse For The Storage Of Evms ( Cus And Bus ) And Vvpats In D . A . C . Jalandhar, Jalandhar-Punjab

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Construction Of Warehouse For The Storage Of Evms ( Cus And Bus ) And Vvpats In D . A . C . Jalandhar, Jalandhar-Punjab

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us