|
| 1 | Demolishing reinforced cement concrete manually / by mechanical means including stacking of steel bars properly and disposal of unserviceable material with all lifts and upto 50 m lead etc. complete as per direction of the Engineer- in-charge. |
| 2 | Demolishing reinforced brick work manually/ by mechanical means including stacking of steel bars, bricks/ brick slump properly and disposal of unserviceable material with all lifts and upto 50m lead etc. complete as per direction of the Engineer-in-charge |
| 3 | Earth work in excavation by mechanical means (Hydraulicexcavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil |
| 4 | Supplying and filling in plinth, under floor, foundations etc. with sand (fine) from local quarry with all lifts including spreading in horizontal layers, watering, grading to required slope, ramming, consolidating and compacting each layer by using plate compactor or by any suitable method complete. |
| 5 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - -All work upto plinth level: 1:4:8 ( 1 Cement: 4 fine sand : 8 graded well burnt brick aggregate 40 mm nominal size) |
| 6 | First class brick work in foundation and plinth including cost of all materials as required complete: In cement mortar 1:4 ( 1 cement : 4 fine sand ) |
| 7 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level excluding the cost of centring, shuttering, finishing and reinforcement- 1:2:4 ( 1 Cement: 2 fine sand : 4 graded well burnt brick aggregate 20 mm nominal size) |
| 8 | Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more |
| 9 | Centering shuttering including struttings, propping etc. and removal of form work for: Lintels, beams, plinth beams, girders, bressumers and cantilevers with wooden plank |
| 10 | First class brick work in superstructure above plinth level & upto floor-five level including cost of all materials as required complete: In cement mortar 1:4 ( 1 cement : 4 fine sand ) |
| 11 | First class brick work in triangular, square and rectangular pillarsincluding cost of all materials as required complete: In cement mortar 1:4 ( 1 cement : 4 fine sand ). |
| 12 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer,including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes |
| 13 | ProvidingcorrugatedG.S.sheetroofingincludingvertical/curvedsurfacefixedwithpolymercoatedJorLhooks,boltsandnuts8mmdiameterwithbitumenandG.I.limpetwashersorwithG.I.limpetwashersfilledwithwhiteleadandincludingacoatofapprovedsteelprimerandtwocoatsofapprovedpaintonoverlappingofsheetscomplete(uptoanypitchinhorizontal/verticalorcurvedsurfaces)excludingthecostofpurlins,raftersandtrussesandincluding cutting to size and shape wherever required. 0.63mm thick with zinc coating not less than 275gm/m2 |
| 14 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering --All work upto plinth level: 1: 1½:3 (1Cement: 1½ fine sand: 3graded stone aggregate20 mm nominal size) |
| 15 | Dismantling old plaster or pointing, raking out joints ,cleaning and preparing the surface for re- plastering gore- pointing in cluding disposal of rubbishto the dumping ground with all lead sand lifts etc. complete as per direction of the Engineer-in-charge. |
| 16 | 15mm cement plaster on the rough side of single or half brick wall of mix: Cement mortar 1:4 (1 cement : 4 fine sand) includingNeat cement punning. |
| 17 | 12 mm cement plaster of mix |
| 18 | 15 mm cement plaster on the rough side of single or half brick wall of mix: Cement mortar 1:4 (1 cement : 4 fine sand) |
| 19 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. all complete. Fixed to openings /wooden frames with rawl plugsscrews etc. |
| 20 | Distempering with oil bound was hable distemper of approved brand and manufacture to given even shade [Payment shall be made after submission of Test Certificate issued by the Manufacturer]New work (two or more coats) over and including water thinkable priming coat with cement primer. |
| 21 | Finishing walls with textured exterior pain to required hade of approved brand and manufacture [Payment shall be made after submission of Test Certificate issued by the Manufacturer] : New work (two or more coats applied @ 3.28 litre/ 10 sqm) over and includingpriming coat of exterior primer applied @ 2.20 kg/10 sqm |
| 22 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade [Payment shall be made after submission of Test Certificate issued by the Manufacturer]: Two or more coats on new work. |
| 23 | Providing and fixing G.I. pipes of medim class as per IS:1239 with latest amendment complete with G.I. fittings and clamps, including cutting and making good the walls etc. complete as per CPWD specification and direction of the Engineer-in-charge. Internal work - Exposed on wall. i)25 mm dia. nominal bore |
| 24 | ii) 20 mm dia. nominal bore |
| 25 | Providing and fixing ball valve (brass) of approved quality High or low pressure, with plastic floats complete : i) 20 mm nominal bore |
