|
| 1 | ITEM NO 1 : Excavation for foundation in earth,soil of all types,sand gravel and soft murum,including removing the excavated material up to a distance of 50 m.beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming , watering including shoring and strutting etc. complete (lift upto 1.5 m ) By Mechanical Means ... (IN21-02, PgNo 197) |
| 2 | ITEM NO 2 : Excavation for foundation in hard murum including removing the excavated material upto distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering , preparing the bed for the foundation and nacessary back filling , ramming, watering including shoring and strutting etc. complete(lift upto 1.50 m ) By Mechanical Means ... (INo21-06, PgNo 197) |
| 3 | ITEM NO 3 :excavation for foundation in Hard rock by chiselling , wedging , line drilling etc. including trimming and levelling the bed, removing the excavated material upto a distance of 50 metresbeyond the building area stacking as directed, dewatering and back filling with available earth/murum watering,ramming etc. complete. (Lift upto 1.5m ). By Mechanical Means... (INo21-20, PgNo 199) |
| 4 | ITEM NO 4 :Providing and laying Castin situ/Ready mixcement concret in M-10 of trap/granite/quartzite/gneiss metal for foundation and bedding including bailing out water, Steel centering , formwork, laying/pumping compacting , roughening them if special finish is to be provided , finishing if required and curing complete. with fully automatic micro processor based PLC WITHOUT SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer ) etc. complete. With fine aggregate (Natural Sand /Crushed sand VSI Grade finely washed/Crushed Sand )Difference in Cost of Crush Sand : Natural Sand at 1575 - Crushed Sand at 700, i.e. 1575 - 700 =875 + Royalty inclusice of Surcharge 144.15 = Rs 1019.15 per CuMt. etc) ... (INo24-01 NS, PgNo 226) |
| 5 | ITEM NO 5 : Providing and laying in situ/Ready mix cement concrete M-20 of trap/granite/quartzite/gneiss metal for R.C.C .work in foundations like raft strip foundations graillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering formwork laying/pumpingcover blocks compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc complete with fully automatic micro processor based PLC WITHOUT SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand/ Crushed sand VSI Grade finely washed/Crushed Sand )Difference in Cost of Crush Sand : Natural Sand at 1575 - Crushed Sand at 700, i.e. 1575 - 700 =875 + Royalty inclusice of Surcharge 158.29 = Rs 1033.29 per CuMt. etc) ... (INo25-11 NS, PgNo 230) |
| 6 | ITEM NO 6 : Providing and laying Casr in situ/Ready mix cement concrete M-20 of trap/granite/quartzite/gneiss metal for R.C.C .columns as per detailed designs and drawing or as directed including centering, formwork ,cover blocks laying /pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete, (Excluding reinforcement and structural steel) with fully automatic micro processor based PLC WITHOUT SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer)etc. complete. With fine aggregate (Natural Sand/Crushed sand VSI Grade finely washed/Crushed Sand )Difference in Cost of Crush Sand : Natural Sand at 1575 - Crushed Sand at 700, i.e. 1575 - 700 =875 + Royalty inclusice of Surcharge 158.29 = Rs 1033.29 per CuMt. etc) ... (INo25-31 NS, PgNo 232) |
| 7 | ITEM NO 7 : Providing and laying Castin situ/Ready mix cement concrete M-20 of trap/granite/quartzite/gneiss metal for R.C.C beams and lintels as per detailed designs and drawing or as directed including steel centering, formwork ,cover blocks , laying/pumping , compactionand roughening the surfaces if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC WITHOUT SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natrual Sand/Crushed sand VSI Grade finely washed /Crushed Sand )Difference in Cost of Crush Sand : Natural Sand at 1575 - Crushed Sand at 700, i.e. 1575 - 700 =875 + Royalty inclusice of Surcharge 158.29 = Rs 1033.29 per CuMt. etc) ... (INo25-50 NS, PgNo 234) |
| 8 | ITEM NO 8 : Providing second class Burnt Brick masonry with conventional /I.S. type bricks in cement mortal 1:6in foundation and plinth of inner walls/in plinth external walls including bailing out water manully, striking joints on unexposed faces, raking out joints on exposed feces and watering etc. Complete... (INo 27-01, PgNo 254) |
| 9 | ITEM NO 9 :Filling in plinth and floors with approved excavated material in 15 cm. to 20 cm. layers including watering and compacting etc complete(INo21-36, Pg No 201) |
| 10 | ITEM NO 10 : Filling in plinth and floors with contractors material /brought from outside and approved by Engineer incharge in layers of 15 cm. to 20 cm. including watering and compaction etc compelte(INo21-37, Pg No 201) |
| 11 | ITEM NO 11 : Providing dry/trap/granite/quartizite/gneiss rubble stone soling 15 cm. to 20 cm. thick including hand packing and compacting etc complete (INo21-38, Page No 201) |
| 12 | ITEM NO 12 : Providing second class Burnt Brick masonry with conventional/I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking, out joints, watering and scaffolding etc. Complete…(INo27-05, PgNo 254) |
| 13 | ITEM NO 13 : Providing and fixing frame with/without ventilator of size as specified with Countrynon teak wood for doors and window including chamfering, rounding, rebating, iron holdfast of size 300mm x 40mm x 5mm with oil painting, etc. complete… (INo39-02, PaNo 313) |
| 14 | ITEM NO : 14: Providing and fixing green marble of 18 to 20 mm thick for door frame/dado/window boxing etc. On C.M. 1:6 including filling joints with polymer base filler nosing the sharp edges wherever necessary , curing, etc. complete…(INo33-48, PgNo280) |
| 15 | ITEM NO 15 : Providing and fixing solid core flush door shutter commercial in single leaf 32mm thick without ventilator commercial type of exterior grade as per detailed drawings with wrought iron hold fast, stainless steel fixtures and fastenings and handles on both sides and finishing with oil paintaing 3 coats complete... (INo39-10, PgNo 315) |
| 16 | ITEM NO 16 :Providing and fixing in position ( as per 1868/1982) Aluminium sliding window of three tracks with rectangula pipe 95 x 38.10 x 0.90 mm at weight 0.637 kg/rmt with window frame bottom track section 92 x 31.75 x 1.30 mm at weight 1.070 kg/Rmt. Top and side track section 92 x 31.75 x 1.30 mm at weight 0.933 kg/Rmt the shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt innter locking section 40 x 18 x 1.10 mm at weight 0.469 kg/Rmt and handle and top section 40 x 18 x 1.25 mm at weight 0.417 kg rmt. as per detailed drawings and as directed by enginner in charge with all necessary Aluminium sections fixtures and fasternings such as roller bearing in nylon casting and self locking catch fitted in vertical section of of shutter including 5 mm thick plain glass adn aluminiummosquito net shutter with stainless steeljail with all required screws and nuts etc complete with powder coating without box... (INo39-44, Pg No 324) |
| 17 | ITEM NO 17 : Providing and fixing in position powder coated alumunium louvered windows/ ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 x 38 mm x 1.22mm box type. 5mm thick sheet glass louvers, of approved quality etc. complete... (INo39-68 , PgNo 331) |
| 18 | ITEM NO 18 :Providing and fixing mild steel grill work for windows ventilators etc 15kg/sqm as per drawing including fixtures necessary welding and painting with one coat of anticorrosive paint and two coats of oil painting complete... (INo40-02, Pg No 338) |
| 19 | ITEM NO 19 :Prpviding and laying Castin situ/Ready mix cement concrete M-20 of trap/granite/quartzite/gneiss metal for R.C.C. slabs and landingsas per detailed designs and drawingincluding steel centering, formwork, cover blocks laying/pumping compaction finishing the formed surfaces with cement mortar 1:3 of sufficent minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete, ( Excluding reinforcement and structural steel ) with fully automatic micro processor based PLC WITHOUT SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. with fine aggregate (Natural Sand/ Crushed Sand VSI Grade finely washed/Crushed Sand )Difference in Cost of Crush Sand : Natural Sand at 1575 - Crushed Sand at 700, i.e. 1575 - 700 =875 + Royalty inclusice of Surcharge 158.29= Rs 1033.29 per CuMt. etc) ... (INo25-70 NS, PgNo 236) |
| 20 | ITEM NO 20 :Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/granite/quartzite/gneiss metal for R.C.C chajja as per detailed design and drawings including Steel centering, formwork, cover blocks compacting, curing, finishing and roughening the surface if special finish is to be provided and curing complete.(Excluding reinforcement and structural steel). with fully automatic micro processor based PLC WITHOUT SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand /Crushed sand VSI Grade finely washed/Crushed Sand )Difference in Cost of Crush Sand : Natural Sand at 1575 - Crushed Sand at 700, i.e. 1575 - 700 =875 + Royalty inclusice of Surcharge 158.29 = Rs 1033.29 per CuMt. etc) ... (INo26-05 NS, PgNo 239) |
| 21 | ITEM NO 21 : Providing and fixing in position TMT- FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footing ,foundations ,slabs, beams columns, canopies, staircase , newels, chajjas, lintels pardis ,copings, fins, arches etc. as per detailed designs ,drawings and schedules. including cutting , bending , hooking the bars, binding with wires or tack welding and supporting as required complete...(INo26-33 , PgNo 245) |
| 22 | ITEM NO 22 : Providing internal cement plaster 6 mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces in all position including scaffolding and curing etc complete... (INo32-01, PgNo268) |
| 23 | ITEM NO 23: Providing internal cement plaster 12 mm thick in single coat in cement mortar 1:5 without neeru finish to concrete or brick surfaces in all position including scaffolding and curing etc complete... (INo32-03, PgNo268) |
| 24 | ITEM NO 23 :Providing fine cement finish 1.5mm thick over green plaster surface including scaffolding curing etc. complete…(INo32-21, PgNo 269) |
| 25 | ITEM NO 25 :Providing neeru finish to plastered surfaces in all posotions including scaffolding and curing etc. complete ...(INo32-15, Pg No 269) |
| 26 | ITEM NO 26 : Providingrough cast cement plaster externally in two coats to concrete brick or stone masonry surfaces in all positions with base coat of 12 to 15 mm thick in C.M. 1:4 and rough cast treatment 12 mm thick in proportion 1:1 1/2:3 including scaffolding and fourteen days curing complete... (INo32-12, PaNo 269) |
| 27 | ITEM NO 27 :Providing and laying vitrified mirror /glossy finish tiles decorative type having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 (group Bla) of approved make,shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. Complete.A) Flooring... (INo33-40, PgNo 279) |
| 28 | ITEM NO 28 :Providing and laying vitrified mirror /glossy finish tileshaving size 590mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 (group Bla) of approved make,shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. Complete. b) Skirting ... (INo33-41, PgNo 279) |
| 29 | ITEM NO 29 : Providing and laying Antiskid Ceramic tiles of approved quality of size 30 cm x 30 cm and confirming to IS 15622-2006 (Group-BIIA) for antiskid flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with cement slurry cleaning curing etc. Complete...(INo33-67, PgNo 283) |
| 30 | ITEM NO 30 :Providing and laying ceramic tiles having size 30cm. X 30 cm. For dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/colour cement slurry cleaning curing etc. Complete...(INo33-25, PgNo277) |
| 31 | ITEM NO 31 :Providing and laying handcut polished Kotah Stone flooring 25mm to 30mm thick and 30cm wide in plain/diamond pattern on a bed of 1:6 C.M. including cement float, filling joints with neat cement slurry, curing, polishing and cleaning etc. complete...(INo33-07, PgNo 273) |
| 32 | ITEM NO 32 :providing and laying machine cut machine polished shahabad Stone slabs 20 to 25mm thick for treads and risers fo steps and staircases, with rounded nosing for the treads on a bed of 1:4 cement mortar including cement float, filling joints with neat cement slurry, curing , polishing and cleaning etc. complete... (INo33-18, PgNo 276) |
| 33 | ITEM NO 33 : Providing and laying chequered tiles of approved quality of size 30 cm x 30 cm for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with cement slurry cleaning curing etc. Complete…(INo33-66, PgNo 283) |
| 34 | ITEM NO 34 :Providing and preparing kitchen otta up to 75 cm width, made up from 30 mm thick and 75 cm high vertical support for kadppa at 1 m. c/c of 25 mm thick both side polished kadappa middle shelf and bottom of 20 mm thick one side polished kadappa with facia patti of 20 x 50 mm kadappa including all material labour cutting fixing with cement mortar and araldite curing polished and cleaning etc. complete...(INo33-38, PgNo 278) |
| 35 | ITEM NO 35 :Providing and laying telephone black /Amba White/Cadburybrown /Ruby red /Ocean Brown granite stone of 18 to 20 mm thick for door frame/dado/window boxing etc. On C.M. 1:6 including filling joints with polymer base filler nosing the sharp edges wherever necessary, curing,etc. complete...(INo33-68, PgNo 283) |
| 36 | ITEM NO 36: Providing and fixing white glazed earthenware Wash Hand Basin of 45cm x 30cm size including cold water pillar tap/cold and hot water pillar tap brackets, rubber plugs and brass chain, stop tap and necessary pipe connection including P.V.C. waste pipe and trap up to the outside face of the wall...(INo41-64, PgNo 348) |
| 37 | ITEM NO 37: Providing and fixing Orissa type white glazed earthenware 575mm water closer pan including S trap with earthenware foot rests, cast iron soil and vent pipe upto outside face of the wall 1:2:4 brick bat lime concrete bedding without flushing tank and its accessories etc. complete... (INo42-30, PgNo 355) |
| 38 | ITEMNO 38 :Providing and constructing Brick Masonry Inspection Chamber 60cm x 45cm x 90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W. pipes, Brick Masonry, plastering from inside and with frame fixed in cement concrete with R.C.C. Cover medium duty 140 kg with frame etc. complete...(INo42-12, PgNo 352) |
| 39 | ITEMNO 39:Providing and fixing 100mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends , tees, single junctions, slotted vent, clamps etc. complete… (INo42-52, PgNo358) |
| 40 | ITEM NO 40:Providing and fixing H.D.P. container Syntex or alike one piece moulded water tank made out of high density polythyler and built corrugated inclusive of delivery up to destination hoisting and fixing of accessories such as inlet, outlet overflow pipe inclusive of all tanks capacity between 200 to 1000 liters... (INo42-53, PgNo 358) |
| 41 | ITEM NO 41 : Providing and fixing on walls/ceiling/floor 15mm dia. CPVC pipe with necessary fitting ,remaking good the demolished portion etc. complete. Includign removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete... (INo42-55, PgNo 358) |
| 42 | ITEM NO 42 :Providing and fixing On walls/ceiling/floor 20mm dia. CPVC pipe with necessary fitting ,remarking good the demolished portion etc. complete. Includign removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete... (INo42-56, PgNo 358) |
| 43 | ITEM NO 43 : Providing and laying in trenches 20 mm dai. CPVC pipe including necessary excavation, fittings. Refilling trenches etc. complete. Including removing existing pipe line if necessary and conveying and sacking the same in PWD chowky or as directed etc. complete...(Ino42-62, PgNo 359) |
| 44 | ITEM NO 44 : Providing and fixing 10cm C.l. Nahani Trap including C.l. grating bend and piece ofC.l. pipe upto the outside face of the wall complete…(INo41-80, PgNo 350) |
| 45 | ITEM NO 45 : Providing and fixing 15 mm dia. Screw down bib/stop tap of brass including necessary socket union nut complete…(INo41-40, PgNo 345) |
| 46 | ITEM NO 46 : Providing and applying water proofing treatment using acrylic polymer modified cement based water proofing coating with fibre glass mesh mixing at the rate of powder to liquid (2:1) by weight covering 9 to 10 sqm/kg with two coat using Dr. Fixit or alike of chemicals for masonry and concrete surface by brush covering 7 years guarantee on Stam Papers etc. complete...(INo31-09, PgNo 264) |
| 47 | ITEM NO 47 : Providing and applying white-wash in two coats on old/new plastered or masonry surfaces and asbestos cement sheets including scaffolding and preparing the surface by brushing & brooming down etc. complete…(INo36-03, PgNo 290) |
| 48 | ITEM NO 48: Providing and applying two coats of water proof cement paint of approved manufacture and of approved colour to the plastered surfaces including scaffolding if necessary, cleaning and preparing the surface, watering for two days etc. complete...(INo35-13, PgNo 287) |
| 49 | ITEM NO 42: Providing and applying washable oil- bound distemper of approved colour and shade to old and new surfaces in two coats including scaffolding, preparing the surface. (excluding the primer coat.) etc. complete… (INo36-11, PgNo 291) |
| 50 | ITEM NO 50: Providingandfixingboarddisplayinginformation,suchas \"Name of work, Tender cost, Name of Contractor, Work completion and liability period etc\", having rectangular shape of 1.20m x 0.90m size made out 18gauge (1.25mm)thick mild steelsheetpaintedwithonecoatofZincchromatestoving primer andtwocoats ofenamelpaintonfrontside andgrey stoveenamelonbacksideandborder/messages/symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles ofsize 35mmx35mmx3mmdulypaintedincludingTwo M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m longpaintedwithalternateblackandwhitebandsof25cm widthincludingallfixturesetc.andfixingtheboardsin1:4:8 concreteblockofsize60cmx60cmx75cmincluding, excavation,refilling,transportation,andlabouretccomplete. Spec. No. As directed by Engineer in Charge ( INo6-36 , PgNo. 73) |
| 51 | ITEM NO 51: Royalty charges for HARD MURUM. Rate Inclusive of surcharge of 2% ( 141.34 + 2.82=144.16, Say 144.15) … (INo1-A, PgNo 1) |
| 52 | ITEM NO 41 : Royalty charges for RUBBLE. Rate Inclusive of surcharge of 2% ( 141.34 + 2.82=144.16, Say 144.15) … (INo1-G, PgNo 1) |
| 53 | ITEM NO 53 :Royalty Charges forNATURAL SAND . Rate Inclusive of surcharge of 2% ( 141.34+2.82=144.16, Say 144.15) … (INo1-l , PgNo 1) |
| 54 | ITEM NO 54 : BRICKS Water Absorption (Set of 5 Bricks ), Compressive Strength (Set of 5 Bricks), Efforescence (Set of 5 Bricks)…(INo13-VQC, PgNo 587) |
| 55 | ITEM NO : CONCRETE Compressive Strength OF C.C. Cube (Set of 3 Cubes)…. (INo19-VQC, PgNo 588) |
| 56 | ITEMNO 56: STEEL BAR TESTING Upto 16mm (set of 3 Bars)… (INo77-VQC , PgNo 591) |
| 57 | ITEM NO 57 : MORTOR Compressive Strength (Set of 3 Cubes)…(INo27-VQC, PgNo 588) |
