Construction Of Auditorium At Sunabeda Municipality Construction Of Auditorium, Sunabeda-Odisha

TDR : 27438244

Tender Notice
BOQ

Expired

Sunabeda , Odisha

Tender Brief : Construction Of Auditorium At Sunabeda Municipality Construction Of Auditorium

Document Fees
₹ 10000 /-

EMD
₹ 216000.0 /-

Tender Value
Refer document

Submission Date
12-04-2021

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !

Name of Work: Const. of Auditorium at Sunabeda Municiaplity
1	1	Const. of Auditorium at Sunabeda Municiaplity	BI01010001010000000000000515BI0100001112
2	2	CIVIL WORKS (STRUCTURE)\n\nExcavation of foundation trenches in all kind soil including cost of all shuttering and shoring in all sides, dewatering the trenches, if required, dressing the sides and leveling the bed up to the required depth and width and depositing the excavated materials within initial lead and lift for re-use or as directed by the Engineer-in-charge including cost of all labour, all other machineries, pumps and T&P required for the work complete in all respect as per latest specification and direction of Engineer-in-Charge wtihin 50m initial lead and 1.5 m initial lift. Up to 1.5m depth	BI01010001010000000000000515BI0100001113	695.64	cum
3	4	After 1.5m depth	BI01010001010000000000000515BI0100001115	275.88	cum
4	5	Providing anti-termite treatment using best quality chemical approved by Central Insecticides Board, as directed by the manufacturer and spraying the mixture uniformly by sprayer as pre-constructional anti termite treatment and creating a chemical barrier under and around the column pits, wall trenches, basement excavation, top surface of plinth filling, junction of walls and floors along with external perimeter of the building, expansion joints, surrounding the pipes and conduits etc. complete at the rate as directed by the manufacturer 50% of the emulsion to be filled in center to center etc. the holes made in trenches at 150mm IS:6313/1981(Part-II) and as per the direction of the Engineer-in-charge including cost of all materials, labour, taxes, sundries, T&P etc. complete.( The payment shall be made on the basis of actual plinth area of the building at ground floor )	BI01010001010000000000000515BI0100001116	358.81	sqm
5	6	Supplying, & filling in foundation and plinth with good quality river sand including watering, ramming with cost, conveyance, royalties, taxes of all materials and cost of all labour with T&P, sundries required for the work etc., complete (Measurement will be taken on finished compacted section) as per specification and direction of Engineer-in-charge.		1077.97	cum
6	7	C.C (1:4:8) with 4cm size HG Crusher BROKEN metal including all cost, conveyance,royalty & taxes etc.comp.to work site as per specification approved by the department & direction of E.I.C.		131.43	cum
7	8	Brick work with Fly Ash bricks of size 25cmx12cmx8cm and crushing strength not less than 75 kg/cm2 in C.M.(1:4) in foundation and plinth including all charges		132.21	cum
8	9	Providing, lifting, hoisting and laying Reinforced Cement Concrete of M-20 grade in Column base, Column Footings, Raft Foundation,Stem of the Columns, beams, chaujja, fin, lintel, stair case, jali , shelves and slab etc as per approved designs and drawings having a minimum compressive strength ( in work test) 20N. / Square mm. in 15 cm. cubes at 28 days after mixing and test conducted in accordance with I.S. 456 and I.S. 516 using screened & washed sharp river sand for mortar and 10 mm. to 20 mm. size black hard crusher broken granite stone chips of approved quality from approved quarry, washed and cleaned to be mixed in concrete mixture with approved quality of cement including hoisting, lowering, laying and compacting concrete by using vibrators, watering and curing for 28 days including, centering and shuttering then after etc completeColoumn Footing		81.21	cum
9	11	Coloumn in Superstructure Up to 4.70m		56.82	cum
10	12	Coloumn in Superstructure after 4.70m		16.26	cum
11	13	Plinth Beam		32.63	cum
12	14	Lintel		5.76	cum
13	15	Roof Beam at 4.7m level		32.75	cum
14	16	Roof Beam after 4.7m level (Roof tie beam)		18.36	cum
15	17	Roof Beam after 4.7m level(truss tie beam)	BI01010001010000000000000515BI0100001121	3.53	cum
16	18	Roof Beam after 4.7m level(Gable End)		2.61	cum
17	19	Roof Slab		48.29	cum
18	20	Roof Slab (Staircase)		2.25	cum
19	21	Staircase		1.52	cum
20	22	Cutting, straightening coiled or bent up M.S. Rod or tor steel of SAIL/ TATA / RINL (VIZAG) make including bending, binding, welding and joining if necessary and tying the grills and placing in position as required for R.C.C. Work and for providing fan hooks as required, hoisting, lowering, laying including cost, conveyances, taxes of M.S. Rod or tor steel and binding wires of 18 to 20 gauge and labour required for the work for bending, binding and tying the grills in all floors (Linear measurement will be taken and quantity will be calculated basing on the standard weight of B.I.S. for M.S. Rods or tor steel only. Wastage if any, including weight of binding wire will not be considered for measurement) etc. complete as per specification & direction of Engineer-in-charge.Up to 4.7m from GL		310.57	qntl
21	24	After 4.7m from GL		73.96	qntl
22	25	Providing Fly Ash brick masonry work in Foundation & Plinth with fly ash bricks 25cm x12 cm x8 cm tolerance of ± 2% size bricks having crushing strength not less than 75 kg/cm2 with cement mortar 1 cement: 6 sands with all necessary projection, splay cutting, circular moulding, corbelling, etc., including cost of all materials, labour, conveyance, loading ,and unloadining, taxes, royalties, scaffolding, watering, curing, sundries, tools and plants, etc., as per the direction of the Engineer-in-charge.Up to 4.7m from GL		172.25	cum
23	27	After 4.7m from GL		78.59	cum
24	28	Providing 6mm thick cement plaster in cement mortar (1:4) to Ceiling of Roof Slab, Stairs, Chajjas, shelves, lofts, beam soffit & sides & other R.C.C. surfaces including deep close chipping, roughening, scrapping, cleaning the exposed R.C.C. surface finishing smooth, providing masonry drip course & grooves wherever necessary including watering, curing, scaffolding etc, complete with cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P, sundries required for the work, screening the sand etc. complete as per specification & direction of the Engineer-in-charge		405.18	sqm
25	29	Providing 12mm thick cement plaster in cement mortar (1:6) in all floors finished smooth to smooth surface of brick walls after racking out joints, scrapping & cleaning the surface & finishing the plaster surface smooth using wooden float only to proper plumbs & level and making necessary grooves, beads & drip course to give required ornamental finish as per drawing, watering, curing, scaffolding, screening sand etc. complete with cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P, sundries required for the work etc. complete as per specification & direction of Engineer-in-chargUp to 4.7m from GL		676.29	sqm
26	31	After 4.7m from GL		487.17	sqm
27	32	Providing 16mm thick cement plaster in cement mortar (1:6) in all floors finished smooth to smooth surface of brick walls after racking out joints, scrapping & cleaning the surface & finishing the plaster surface smooth using wooden float only to proper plumbs & level and making necessary grooves, beads & drip course to give required ornamental finish as per drawing, watering, curing, scaffolding, screening sand etc. complete with cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P, sundries required for the work etc. complete as per specification & direction of Engineer-in-chargUp to 4.7m from GL		712.28	sqm
28	34	After 4.7m from GL		272.8	sqm
29	35	Providing 20mm thick cement plaster in cement mortar (1:6) in all floors finished smooth to smooth surface of brick walls after racking out joints, scrapping & cleaning the surface & finishing the plaster surface smooth using wooden float only to proper plumbs & level and making necessary grooves, beads & drip course to give required ornamental finish as per drawing, watering, curing, scaffolding, screening sand etc. complete with cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P, sundries required for the work etc. complete as per specification & direction of Engineer-in-charge		99.95	sqm
30	36	Wall painting 2 coats with weather coat over a coat of primer to inside and out side smooth surface with all cost of labour, T&P material etc complete.Up to 4.7m from GL		423.63	sqm
31	38	After 4.7m		487.17	sqm
32	39	Wall painting 2 coats with plastic emulsion paint of approved shade over a coat of primer on new work to give an even shadewith all cost of labour, T&P material etc complete.Up to 4.7m from GL		1065.49	sqm
33	41	After 4.7m		272	sqm
34	42	Supplying, fitting and fixing of M.S grills gate, grill gates with top and bottom rails, steel windows, steel doors, steel frames for doors and windows, staircase and parapet railing ( as per I.S. specification and as per approved drawings ) in proper position in all floors and at all height including making holes to brick walls/ R.C.C structure/wood work etc. and making good to the damaged walls/ structures with cement concrete (1:2:4) with black hard crusher broken granite stone chips of 12mm to 20mm size ( 20mm size not to exceeds 25% ) including watering and curing etc. complete in all respect as directed by the Engineer in charge ( W.I. / M.S. windows grills, grill gates, collapsible gates with top and bottom rails, steel windows, steel doors, steel frames for doors and windows, staircase and parapet railings square bar along with required nos. of nails and screws and other required materials of approved quality and approved size shall be supplied by the contractor at his own cost.)		165.38	kg
35	43	Providing and fixing of Aluminium (powdered coated coloured) Sliding windows made up of Aluminium Section 151 - 154, 151 - 155, as windows frame section No. 151 - 155, 151 - 153 and 151 - 167 as shutter frame with 5 mm thick colourd glass as pannels fitted with rubber beading including locking arrangement, handles, side locking arrangement and partitioning the window opening with required number of mullions including all fittings, cost, taxes, royalty and conveyance of all materials and labour required for the work, T&P etc. complete in all respect as per latest specification and direction of the Engineer-in-Charge.		24.52	sqm
36	44	Supplying, fitting & fixing of Well dressed & seasoned Sal wood Choukaths of size 0’-5” x 0’-21/2” for doors & windows including fixing the same in proper position including mending size of grooves in choukaths fixing with necessary W.I. clamps in position with screws, painting to wall side face of choukath with 2coats of coaltaring finished smooth including cost of all labour, T&P, cost, conveyance, royalty & taxes of all materials required for the work etc. complete in all respect as per direction of Engineer-in-charge.		2.51	cum
37	45	Providing and fixing 38mm thick well seasoned Teak wood paneled shutter, made out of 38X100mm style, 38X150mm bottom rail, 38X225mm lock rail inserted with 25mm thick Teak pannels including fixing the same in proper position as per drawing and the direction of the Engineer-in-charge. The shutters shall be fixed with stainless steel hinges 3 no.s of 5\" size with stainles steel NF screws, locking arrangements with stainless steel 250 mm x 10 mm tower bolt on top & vertical side, brass 150mm long handles, Brass aldrop 250 mm along with necessary screws nettle fold mark, rubber stopper, PVC sand block fixed to door frames with Godrej interlocking system (6 lever pad lock) including cost of all materials, labour, T&P, cost of all hardware fittings required for the work etc. complete as per the specification and direction of the Engineer-in-charge		63.12	sqm
38	46	Painting two coats with approved synthetic enamel paints of Asian / Berger/Dulox make and of approved colour, shade to new Iron & wood work over a coat of red-oxide primer of Asian / Berger make including sand papering, polishing the surface, cost, conveyances, taxes of all materials and cost of all labour with T&P etc, complete as per specification & direction of Engineer-in-charge.		10.63	sqm
39	47	Supplying and laying floor tiles of approved make like Somany/ Johnson/ NITCO and shade in floors using premium quality 600mm X 600mm size and 8mm to 10mm thick tiles confirming to IS specifications having minimum breaking strength of 1400 Kg/Sqcm. Fixing tiles in floors treads or steps and landing on 25mm thick bed of cement mortar 1:1 (1cement : 1sand) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing completset including cost of all labour, materials, taxes, transportation, loading, unloading, royalties, sundries, watering and curing, T&P etc. complete as per design and as directed by the Engineer-in-charge. Vitrified tile		269.14	sqm
40	49	Ceramic Tile		38.56	sqmt
41	50	Granite 0.40 sqm. (20mm thick)		96.61	sqm
42	51	Vinyl Flooring\nWorld class vinyl flooring\nSpecification:\nThickness-6.5mm\nSlip resistance-DIN 51130 (R9)\n Sound absorption-ISO140-8,LW-18db\nChemical resistance		316.57	sqm
43	52	Providing and Fixing tiles in dados skirting and risers of steps on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shade of the tiles including rubbing and polishing completeVitrified tile		41.7	sqm
44	53	Ceramic Tile		109.61	sqm
45	54	Supplyiing , fitting and fixing of stainless steel of 304 grade hand raling using 50mm dia of 2mm thisck circular pipe with balu strade of size 32mm x 32mm x2mm @ 0.90mtr c/c and stainless sqquire pipe brasing of size 32mm x 32mm x2mm in 3 rows in stare case as per approval degine and specificarion boofing pollising etc with cost conveyance taxes of all materails labour tand p etc requierd for the complete in all respect .		7.8	rmt
46	55	Supply and laying m30 grade heavy duty factory made hydraucally pressed and mechanically compacted free cast inter locking paver 60 mm thick approve shape preparation of sub base with 50 mm sand and levelling ,laying of interlocking paver block with sand binding and final compaction with plate vibrator finishing the surface including cutting the block with its edges and fixing kerb stone along both side of the pathway all complete as per specification and direction of Engineer-in-charge		1044.94	sqm
47	56	CIVIL WORKS (BOUNDARYWALL)\n\nExcavation of foundation trenches in all kind soil including cost of all shuttering and shoring in all sides, dewatering the trenches, if required, dressing the sides and leveling the bed up to the required depth and width and depositing the excavated materials within initial lead and lift for re-use or as directed by the Engineer-in-charge including cost of all labour, all other machineries, pumps and T&P required for the work complete in all respect as per latest specification and direction of Engineer-in-Charge wtihin 50m initial lead and 1.5 m initial lift.		106.01	cum
48	57	Supplying and filling with sand well watered and rammed in layers not exceeding 23 cm in depth with all lead and lift including cost, conveyance,loading,unloading,royalities and taxes of all materials cost of all labour sundries T&P required for the work etc complete in all respect as directed by the engineer in charge\n(Measurement will be taken on finished compacted section only.)		17.13	cum
49	58	C.C (1:4:8) with 4cm size HG Crusher BROKEN metal including all cost, conveyance,royalty & taxes etc.comp.to work site as per specification approved by the department & direction of E.I.C.		11.42	cum
50	59	Providing, lifting, hoisting and laying Reinforced Cement Concrete of M-20 grade in Column base, Column Footings, Raft Foundation,Stem of the Columns, beams, chaujja, fin, lintel, stair case, jali , shelves and slab etc as per approved designs and drawings having a minimum compressive strength ( in work test) 20N. / Square mm. in 15 cm. cubes at 28 days after mixing and test conducted in accordance with I.S. 456 and I.S. 516 using screened & washed sharp river sand for mortar and 10 mm. to 20 mm. size black hard crusher broken granite stone chips of approved quality from approved quarry, washed and cleaned to be mixed in concrete mixture with approved quality of cement including hoisting, lowering, laying and compacting concrete by using vibrators, watering and curing for 28 days including, centering and shuttering then after dismantling and removing the debrises away from the work site and finishing the exposed surface smooth providing grooves or beads wherever necessary including cost, conveyance, loading, unloading, royalties and taxes of all materials , cost of all labours, scaffolding, sundries, T&P required for the work etc. complete in all respect but the excluding cost & conveyance of M.S. rods or Tor Steel and Binding wires and labour charges for straightening, cutting, bending etc. of M.S. rods or Tor steel and binding wires and tying the grills and placing in proper position as directed by the Engineer-in-charge.Footing		10.8	cum
51	61	Tie beam		9.76	cum
52	62	Column		4.84	cum
53	63	Cutting,Straightening coiled or bent up M.S plain HYSD/TMT reinforcement bars welding or jointing if necessary bending,binding,tying the grills as required for R.C.C works,providing fan hooks where necessary and hoisting, lowering and placing in proper position according to approved designs and drawings including cost, conveyance,loading, unloading & taxes of M.S plain/HYSD/TMT reinforcement bars and binding wires of 18 to 20 gaugo required for the work and cost of all labour, sundries, T&P and scaffolding complete in all respect as directed by the Engineer in charge (payment will be made according to the actual weight of M.S plain/HYSD/TMT reinforcement bars consumed in the work only.		31.49	qntl
54	64	Providing Fly Ash brick masonry work in Foundation & Plinth with fly ash bricks 25cm x12 cm x8 cm tolerance of ± 2% size bricks having crushing strength not less than 75 kg/cm2 with cement mortar 1 cement: 6 sands with all necessary projection, splay cutting, circular moulding, corbelling, etc., including cost of all materials, labour, conveyance, loading ,and unloadining, taxes, royalties, scaffolding, watering, curing, sundries, tools and plants, etc., as per the direction of the Engineer-in-charge.		51.79	cum
55	65	Providing Fly Ash brick masonry work in Super Structure with fly ash bricks 25cm x12 cm x8 cm tolerance of ± 2% size bricks having crushing strength not less than 75 kg/cm2 with cement mortar 1 cement: 6 sands with all necessary projection, splay cutting, circular moulding, corbelling, etc., including cost of all materials, labour, conveyance, loading ,and unloadining, taxes, royalties, scaffolding, watering, curing, sundries, tools and plants, etc., as per the direction of the Engineer-in-charge.		47.48	cum
56	66	Providing 12 mm. thick cement plaster in all floors at all height with cement mortar of mix (1:6) with cement and screened & washed sharp sand for mortar and finished smooth to the rough surface of the brick masonry wall after racking out joints (along with providing grooves wherever necessary) including watering and curing rounding of corner etc. complete with cost, conveyance, loading, unloading, royalties and taxes of all materials, cost all labour, I & P, sundries and scaffolding required for the work etc as directed by the Engineer in charge.		516.54	sqm
57	67	Wall painting 2 coats with weather coat over a coat of primer to inside and out side smooth surface with all cost of labour, T&P material etc complete.		516.54	sqm
58	68	Supplying, fitting and fixing of M.S grills, grill gates with top and bottom rails, steel windows, steel doors, steel frames for doors and windows, staircase and parapet railing ( as per I.S. specification and as per approved drawings ) in proper position in all floors and at all height including making holes to brick walls/ R.C.C structure/wood work etc. and making good to the damaged walls/ structures with cement concrete (1:2:4) with black hard crusher broken granite stone chips of 12mm to 20mm size ( 20mm size not to exceeds 25% ) including watering and curing etc. complete in all respect as directed by the Engineer in charge ( W.I. / M.S. windows grills, grill gates, collapsible gates with top and bottom rails, steel windows, steel doors, steel frames for doors and windows, staircase and parapet railings square bar along with required nos. of nails and screws and other required materials of approved quality and approved size shall be supplied by the contractor at his own cost.)		885.6	kg
59	69	TRUSS WORK\nSupplying, Manufacturing, fabricating & assembling of frame structure at stage area with circular/square hollow steel tube section of TATA STRUCTURE shall conform to CHS-IS-1161 & SHS?RHS of IS 4923 grade for shed component viz. column, truss, purlin etc as per approved drawing including two coat of primer & two coat of enamel painting.		12940.4	kg
60	70	Pre painted Galvanum roofing sheet of .50mm th Az70/300mpa paint Rmp Ganga make or similar with fixing screws .		500.71	sqm
61	71	Painting of truss with one coat of redoxide and two coat of enamel paint of approve make.		12940.4	kg
62	72	BOREWELL\nLabour for drilling a perfectly vertical bore holes of specified diameter for a specified depth below ground level through hard and boulder formation by means for Fast Drilling Sophisticated Rigs as required to suit the site condtion as per the direction of Engineer-in charge including deployment of rig with its accessories,T&P and consumables etc. for a finished bore suitable for lowering of 125 x 100 mm nominal dia PVC or GI casing pipes fitted with sockets and with or without well screens as per necessity for the soft and hard formations drilled by combination drilling method. Drilling 200mm bore from 0 mtr.		30	mm
63	74	Drilling 150mm bore from 30 mtr to 100 mtr		70	mtr
64	75	Labour for lowering the following sizes of PVC or GI pipes with or without strainers as per necessity and fitted and fixed up in perfectly vertical position including cutting and threading the pipes as may be necessary and supplying all jointing materials, extra sockets (GI or PVC heavy quality) , tools and plant etc. complete and keeping the top of the casing pipe threaded including plugging the tube wells to prevent entry of foreign materials from above.Lowering of 200 mm dia PVC casing pipes from 0 mtr to 30 mtr		30	mtr
65	77	Lowering of 150 mm dia PVC casing pipes from 30 mtr to 100 mtr		15	mtr
66	78	Cleaning and developing the tube well with supply of comperssor worked till clear and adequate discharge is obtained from the tube well incuding supply and use of all necessary equipments and labour as per the direction of Engineer-in-charge.		1	each
67	79	Supply of 200mm PVC pipes as per ASTM-1785/89 schedule-80. The cost of pipes will be paid as per EPM rate contract including taxes and transportation.\nORISSA PH-SR-2017, ASTM-D-1785/2004, P-11, Sl.No-15.B.VIII		35	mtr
68	80	Supply testing and commissoning of 1HP, 3Phase Vertical submerssible Pump set including all taxes, conveyance etc. complete as direction of Engineer-in-charge.		1	each
69	81	Panel board, cable and switch		1	each
70	82	Supplying all labour , materials T & P for laying of following dia mtrs. Of HDPE (50mm) 2\" pipe lines including cutting welding to required length jointing etc. including earth work excavation in pipe line trenches and refilling etc. all complete as per specufication and direction of EIC.\nORISSA PH-SR-2017, ASTM-D-1785, P-11, Sl.No-15,c,i\n\n50mm dia HDPE pipe		35	mtr
71	83	Suoolying all labour materials T&P for fitting fixing of following MS/CI fittings as per specification and direction of EIC.\nORISSA PH-SCHEDULE OF RATE-2017, P-15, Sl.No-127,vi\n\n50mm dia sluice Valve		2	each
72	84	100 USER SEPTIC TANK\n\nEarth work in excavation of foundation trenches in all kinds of soil including moorum, stony earth and earth mixed with boulders except sheet rock and boulders required depth and depositing the excavated materials away from the work site with all leads and lifts including shoring shuttering & dewatering (if required) with cost of labour hire & running charges of water pumps sundries & T & P required for the work complete as directed by the Engineer in charge.1st Depth of 1.50Mtr		29.81	cum
73	86	2nd Depth of 1.50Mtr		29.81	cum
74	87	3rd Depth of 0.23Mtr		4.47	cum
75	88	Dry brick khoa well watered and rammed etc. complete.		19.88	sqm
76	89	Providing & laying Plain Cement concrete (PCC ) of proportion (1:3:6) in foundation and floors using 4cm (1½”) size clean hard black crusher broken granite stone metal of approved quality and from approved quarry including hoisting, lowering and laying concrete in layers not exceeding 15 cm. (6”) thick to the required level ramming, watering, curing etc. complete including cost, conveyance, royalties and taxes of all materials with all labour, cess and T&P required for the work etc. complete in all respect.		3.54	cum
77	90	Providing Fly Ash brick masonry work in Foundation & Plinth with fly ash bricks 25cm x12 cm x8 cm tolerance of ± 2% size bricks having crushing strength not less than 75 kg/cm2 with cement mortar 1 cement: 6 sands with all necessary projection, splay cutting, circular moulding, corbelling, etc., including cost of all materials, labour, conveyance, loading ,and unloadining, taxes, royalties, scaffolding, watering, curing, sundries, tools and plants, etc., as per the direction of the Engineer-in-charge.		27.98	cum
78	91	Providing 12 mm. thick cement plaster in all floors at all height with cement mortar of mix (1:6) with cement and screened & washed sharp sand for mortar and finished smooth to the rough surface of the brick masonry wall after racking out joints (along with providing grooves wherever necessary) including watering and curing rounding of corner etc. complete with cost, conveyance, loading, unloading, royalties and taxes of all materials, cost all labour, I & P, sundries and scaffolding required for the work etc as directed by the Engineer in charge.		69.15	sqm
79	92	Cement Punning including cost of all materials, labour, conveyance, loading ,and unloadining, taxes, royalties, scaffolding, watering, curing, sundries, tools and plants, etc., as per the direction of the Engineer-in-charge.		63.84	sqm
80	93	Flush pointing to stone masonry in cement mortar 1:3 including racking out joints 5mm deep, cleaning, pressing cement mortar finishing and curing including cost of materials, labour, scaffolding with initial lead and lift upto 10m etc. complete as per the direction of Engineer-in-charge.		52.87	sqm
81	94	RCC Cover slab in (1:2:4) using 12mm HGCB chips. Etc. complete.		1.68	cum
82	95	Supplying fitting & placing uncoated HYSD reinforcement including cutting, bendind,binding & placing the steel rods as per drawing & technical specification with cost of binding wire 18 to 20 gauge		1.34	cum
83	96	Filling foundation/ around the chamber and spreading low laying area with excavated earth.		21.36	cum
84	97	SOAKPIT\n\nEarth work in excavation of foundation trenches in all kinds of soil including moorum, stony earth and earth mixed with boulders except sheet rock and boulders required depth and depositing the excavated materials away from the work site with all leads and lifts including shoring shuttering & dewatering (if required) with cost of labour hire & running charges of water pumps sundries & T & P required for the work complete as directed by the Engineer in charge.		29.18	cum
85	98	Supplying and filling plinth with coarse sand well watered and rammed in layers not exceeding 23 cm in depth with all lead and lift including cost, conveyance,loading,unloading,royalities and taxes of all materials cost of all labour sundries T&P required for the work etc complete in all respect as directed by the engineer in charge (Measurement will be taken on finished compacted section only.)		6.54	cum
86	99	Providing Fly Ash brick masonry work in Foundation & Plinth with fly ash bricks 25cm x12 cm x8 cm tolerance of ± 2% size bricks having crushing strength not less than 75 kg/cm2 with cement mortar 1 cement: 6 sands with all necessary projection, splay cutting, circular moulding, corbelling, etc., including cost of all materials, labour, conveyance, loading ,and unloadining, taxes, royalties, scaffolding, watering, curing, sundries, tools and plants, etc., as per the direction of the Engineer-in-charge.		7.23	cum
87	100	RCC Cover slab in (1:2:4) using 12mm HGCB chips. Etc. complete.		1.14	sqm
88	101	Supplying fitting & placing uncoated HYSD reinforcement including cutting, bendind,binding & placing the steel rods as per drawing & technical specification with cost of binding wire 18 to 20 gauge		1.14	cum
89	102	Dry brick khoa well watered and rammed etc. complete.		5.95	sqm
90	103	INTERNAL PH\n\nSupplying, Fittings & Fixing at all heights with all labour, T&P as per specification, the GI pipes confirming to relevent IS specification of medium series (TATA / Jindal) of following sizes with necessary GI fittings such as bends,elbows,Tees,reducers, sockets,longscrews,unions,short -piece,nipples,caps,plugs with clamps,hooks to the walls/floor etc.complete in all respect as per the direction of the Engineer- in -charge 80 mm dia GI pipe (at Terrace).		52.4	mtr
91	105	65mm dia GI pipe.		43	mtr
92	106	50 mm dia GI pipe (Riser pipe)		12	mtr
93	107	25 mm dia GI pipe (concealed)		8	mtr
94	108	Supplying, Fittings & Fixing in floors and at all heights the CPVC pipes of following sizes with necessary fittings to the walls including concealing the pipes with cutting grooves to the brick & concrete walls and making good to the grooves/damages after laying and fixing the pipes, with C.M. (1:4) etc. complete in all respect as pe rthe direction of the Engineer in charge. (Concealed)15 mm dia CPVC Pipe		12.6	mtr
95	110	20 mm dia CPVC .Pipe		38	mtr
96	111	Supplying, Fittings & Fixing with all labour, T&P as per specification, the following Brass / CP(Jaquar) /G.M. fittings at appropriate locations along the pipe lines at all floors and at all heights of approved make confirming to relevent IS specification. etc.complete in all respect as per direction of the Engineer in charge.15 mm dia C.P.2 way Bib Cock (Short body)		21	each
97	113	15 mm dia CP Bib cock ( Long Body)		2	each
98	114	15 mm dia CP Angle stop cock		31	each
99	115	15 mm dia Conc. Stop cock.		2	each
100	116	15 mm dia C.P. Pillar cock		10	each
101	117	15 mm dia C.P. Shower with arm		3	each
102	118	600 mm long CP Towel rail		3	each
103	119	CP Soap holder		9	each
104	120	100 mm dia CP Grating		8	each
105	121	15 mm dia C.P. Towel Ring		9	each
106	122	15 mm dia C.P. hot &Cold Mixture with provision of telephonic shower.		3	each
107	123	600 mm long C.P. Glass shelf with C.P frame		5	each
108	124	32 mm dia C.P. waste		10	each
109	125	Telephonic shower(Health faucet)		9	each
110	126	80mm dia GM FW valve		5	each
111	127	65mm dia GM FW valve		4	each
112	128	50mm dia GM FW valve		3	each
113	129	25mm dia GM FW valve		5	each
114	130	Supplying, Fittings & Fixing with all labour, T&P as per specification, the following flexible PVC connection pipes and waste pipe making connection with pillar cock, cistern. Wash hand basin at all height and all floors with all jointing materials etc. complete as per direction of the Engineer -in- charge. 450-600 mm long 15mm dia PVC connection pipe450-600 mm long 15mm dia PVC connection pip		13	each
115	132	32 mm dia flexible PVC waste pipe. Each of 1 mtr each		10	each
116	133	Supplying, Fittings & Fixing of 10 Ltr. Capacity low level P.V.C cistern white colour, (Parryware-Slimline) to wall at all floors and at all height with all accessories etc. complete in all respect as per direction of the Engineer -in- charge.		9	each
117	134	Supplying, Fittings & Fixing of following sizes of porcelain wash hand basin confirming to relevant IS specification of Nycer/ Cera/ Parryware make to the brick / concrete wall etc. complete as per direction of the Engineer in charge.\n\nStandard ( 550x400mm) size basin		10	each
118	135	Supplying , fitting and fixing the standard size of European pattern porcelain wash down water closet confirming to relevant IS specification of Nycer/ Cera / Parryware make having 'S' or 'P' trap etc with all required materials, labour T&P etc. complete as per direction of the Engineer in charge.		9	each
119	136	Supplying ,fitting and fixing with all labour and T & P 4mm thick bevelled edge sheet glass mirror of relevant IS specification to the brick concrete wall with full sheet hard board and CP down shaped screw on wooden /PVC plug etc. complete as per direction of the Engineer in charge.		10	each
120	137	Supplying ,fitting and fixing of 40 mm dia PVC pipe and fittings with jointing materials to drain out waste water from basin / sink etc complete as per direction of the Engineer in charge.		14	mtr
121	138	Supplying all labour T & P etc for cutting holes in brick masonry wall/ RCC work for passing of GI Pipes of 15 mm to 50 mm dia and making good to the damages with C.M. (1:4) as per direction of the Engineer in charge.		22	each
122	139	Supplying, fitting & fixing of ISI marked PVC,CLASS-B(SWR) pipes with all materials, labour & T&P on concrete / Brick walls and grounds with nails, bobbins and wooden plugs as required including , scaffolding with proper plumbing fittings for exposed pipes complete in all respect as per direction of the Engineer in charge.110mm dia PVC pipes		24	mtr
123	140	75mm dia PVC pipes(Anti siphon pipe)		15	mtr
124	141	Supplying, fitting & fixing of following size of UPVC,CLASS-B(SWR) fittings of ISI marked to UPVC pipes (on concrete / Brick walls and grounds) with all materials labour T&P including cutting of the walls, with supply of nails, bobbins and wooden plugs as required including scaffolding etc. complete in all respect as per direction of the Engineer in charge.110 mm dia Single Junction with door		7	each
125	142	110 mm dia double Junction with door		4	each
126	143	110 mm dia Door Bend		14	each
127	144	110 mm dia Heel Rest Bend		9	each
128	145	110 mm dia 'P' Trap		17	each
129	146	110 mm dia Off set		6	each
130	147	110 mm dia plain bend		14	each
131	148	110 mm dia Cowl		6	each
132	149	110x75 mm dia T junction		9	each
133	150	75 mm dia Single Junction with door		12	each
134	151	75 mm dia Single Junction without door		12	each
135	152	75 mm dia Cowl		7	each
136	153	Supplying all materials T&P and constructing M.H. chamber of size 910mmx910mmx910mm with CC (1:3:6) using 40mm size hard granite metal (CB) on bed, fly ash brick work on CM (1:6) mouldings and shapings inside and benching with CC (1:2:4) using 12mm size hand granite chips, 12mm thick CP(1:6) with punning inside face , cement flusing in (1:3) to outside face, R.C.C cover slab in (1:2:4) using 12mm size h.g. chips with RCC MH cover and earth work excavation in ordinary soil and refilling the cavity around the chamber including curing, conveyance all materials to work site, royalty taxes etc. complete as per P.H. Diagram, specification and direction of EIC.		6	each
137	154	PVC sintex water storage tank of capacity 1000ltr		3	each
138	155	PVC sintex water storage tank of capacity 1000ltr		3	each
139	156	ELECTRIFICATION\n\nWiring to Light, Exhaust Fan, Call Bell and Ceiling Fan with 1.5 mm2 PVC insulated 1100 volt grade multi-stranded Copper Conductor Wire for Phase, Neutral And Earth Continuity Conductor and loop earth to fitting and fixture run inside 2mm thick PVC Conduit Pipe recessed in Wall/ Column/ Ceiling of the Building including supply of materials such as Clip-In Modular type Switches, Sockets, Modular PVC Switch Boxes, Cover, FR PVC Wire, Ceiling Rose, Angle / Batten Holder, Junction Box etc. complete with making good the damages caused as required and as per Direction of Engineer-In-Charge. Single Light Point controlled by One 6 Amp. Switch / First Light Point of Group Control.		80	each
140	157	Subsequent Light Point.		25	each
141	158	Ceiling Fan Point with supply and fixing of Ceiling Fan Hook made of 10 mm Steel Round Bar. (Space shall be provided for installation of Electronics type Stepped Fan Regulator).6 Amp. Plug with 6 Amp. Switch on Same Board.		9	each
142	159	6 Amp. Plug with 6 Amp. Switch on Separate Board.		20	each
143	160	6 Amp. Plug with 6 Amp. Switch on Separate Board.		2	each
144	161	2x6 Amp. Plug on Separate Board.		1	each
145	162	Exhaust Fan Point.		5	each
146	163	Supply, delivery, installation & testing of following Plug Boards including inter- connections and making good the damages caused complete as required and as per Direction of Engineer-In-Charge. 6 / 16 Amp. Plug Boards consisting of a 16 Amp. Clip-in type Modular Switch with Indicator and a 6/16 Amp. Clip-in type Modular shuttered Plug Socket fixed on Metallic Concealed Box.		5	each
147	164	Supply, delivery, installation & testing of 20 Amp. Metal Clad 3 Pin Plug Socket having Phase, Neutral and Scraping Earth with Plug Top and 20 Amp. SP MCB including Metalic enclosure complete with making connections, making good the damages caused as required and as per Direction of Engineer-In-Charge.		12	each
148	165	Wiring for Circuits and Submain with following number & sizes of PVC insulated 1100 Volt Grade Multistranded Copper Conductor Wire run inside 2 mm thick PVC Conduit Pipe Recessed in Ceiling / Column / Walls of Building including supply of all materials such as wires, PVC Conduit, Junction Box & Pull Box etc. complete with making good the damages caused as required and as per Direction of Engineer-In-Charge. 2 Nos. Single Core 2.5 mm2 Copper Wire for Phase and Neutral and 1 No. Single Core 1.5 mm2 Copper Wire for Earth Continuity Conductor as per SLD.		500	mtr
149	166	2 Nos. Single Core 4.0 mm2 Copper Wire for Phase and Neutral and 1 No. Single Core 2.5 mm2 Copper Wire for Earth Continuity Conductor as per SLD.		300	mtr
150	167	2 Nos. Single Core 6.0 mm2 Copper Wire for Phase and Neutral and 1 No. Single Core 4.0 mm2 Copper Wire for Earth Continuity Conductor as per SLD.		250	mtrs
151	168	4 Nos. Single Core 6.0 mm2 Copper Wire for Phase and Neutral and 2 Nos. Single Core 4.0 mm2 Copper Wire for Earth Continuity Conductor as per SLD.		250	each
152	169	4 Nos. Single Core 10.0 mm2 Copper Wire for Phase and Neutral and 2 Nos. Single Core 6.0 mm2 Copper Wire for Earth Continuity Conductor as per SLD.		200	mtr
153	170	Supply, delivery, installation and testing of Telephone Outlet Boards containing a Clip-in type Modular Telephone Socket with Top fixed on GI concealed Modular Switch Board including Connections & making good the damages caused complete as required and as per Direction of Engineer-In-Charge.		3	each
154	171	Wiring to Telephone Socket Outlet from Junction Box with 0.5 mm2 Twin Pair Copper Conductor Telephone Wire run inside prelaid PVC Conduit complete including termination, testing etc complete as required and as per Direction of Engineer-In-Charge.		90	each
155	172	Supply, delivery, installation, testing & commissioning of Indoor Wall mounted type Telephone Distribution Box having following number of Junctions made out of 1.6 mm thick CR sheet steel duly premiered & painted with enamel paint having hinged front door, testing facility having provision for cable / conduit entry complete as per Direction of Engineer-In-Charge. \nJunction box suitable for 20 Pair Telephone Cable Termination.\n		2	each
156	173	Supply, delivery, installation and testing of TV Antenna Outlet Boards containing a Modular type TV Antenna Socket fixed on Modular Concealed Box including connections and making good the damages caused complete as required and as per Direction of Engineer-In-Charge.		2	each
157	174	Supply, delivery, installation and testing of TV Antenna Wires RG6 in PVC Pipe and making good the damages caused complete as required and as per Direction of Engineer-In-Charge.		60	each
158	175	Supply, delivery and laying of following sizes of 2 mm Wall thickness rigid PVC Conduit Concealed in Wall/ Column/ Roof Slab of the Building or mounted on surface along with other accessories and 18 SWG GI Fish Wire complete for Telephone / TV / Circuit or Sub main wiring as required & as per Direction of Engineer-In-Charge. 20 mm dia.		80	mtr
159	176	25 mm dia.		50	mtr
160	177	DISTRIBUTION BOARDS:\n\nSupply, delivery, installation, testing & commissioning of L.T. Indoor Wall mounted Double Door type Distribution Boards of Original Factory made enclosures of the same Brand as the MCB conforming to the relevant ISS and as per special conditions of contract making good the damages caused complete as per the Direction of Engineer-In-Charge. Light Distribution Board: (4 Way TPN DB Mettalic double door): Company made Metal Door type with IP-43 Degree of Protection.\nIncoming: 1 No. 25 Amp. 2p MCI.\n\nOutgoing : 12 Nos. 10 Amp SP MCB 10 KA as per Requirement.		1	each
161	178	Power Distribution Board: (6 Way TPN DB Mettalic double door): Company made Metal Door type with IP-43 Degree of Protection.\n\nIncoming: 1 No. 100 Amp. 4p MCI.\nOutgoing : 9 Nos. 32 Amp DP MCB 10 KA as per Requirement.\n		2	set
162	179	FLOOR Power Distribution Board: (4 Way TPN DB Mettalic double door): Company made Metal Door type with IP-43 Degree of Protection.\nIncoming: 1 No. 100 Amp. 4p MCI.\nOutgoing : 3 Nos. 63 Amp 4P MCB 10 KA as per Requirement.\n		1	set
163	180	FLOOR Light Distribution Board: (4 Way TPN DB Mettalic double door): Company made Metal Door type with IP-43 Degree of Protection.\n\nIncoming: 1 No. 40 Amp. 4p MCI.\nOutgoing : 3 Nos. 32 Amp 2P MCB 10 KA as per Requirement.\n		1	set
164	181	Coridoor Distribution Board: (4 Way SPN DB Mettalic double door): Company made Metal Door type with IP-43 Degree of Protection.\n\nIncoming: 1 No. 25 Amp. 2p MCB 10KA.\nOutgoing : 2 Nos. 10 Amp SP MCB 10 KA as per Requirement.\n		7	set
165	182	Common Distribution Board: (6 Way SPN DB Mettalic double door): Company made Metal Door type with IP-43 Degree of Protection.\nIncoming: 1 No. 25 Amp. 2p MCB 10KA.\nOutgoing : 4 Nos. 6-16 Amp SP MCB 10 KA as per Requirement.\n		1	set
166	183	Junction Board- (D.G ): Indoor Sheet Metal Box with hinged door with thumb screw containing 12 Way 63 Amp. Connector.		2	set
167	184	FITTINGS & FIXTURES:\n\nSupply, delivery, installation and testing of following types of Fluorescent Tube Fixtures Directly on Wall / Ceiling of Building with all accessories such as Electronics Ballast, Lamps, Stove Enameled Box, Perplex Sheet Cover etc. complete assembly and making connection from the suitable point outlet as per the Direction of Engineer-In-Charge. (For Common Service Areas).1 X 28 Watt T-5 Fluorescent Tube fixtures similar to Philips Catalogue No. - TWG 207 1 X TL5-28W HF or Equivalent.		44	each
168	185	Angle Holder with 15 Watt CFL (Angle Holders - 6 Nos. and Bed Lights - 18 Nos.)		5	each
169	186	Bulkhead with 15 Watt CFL.		2	each
170	187	12W Round LED.		47	each
171	188	Metal Helid.		6	each
172	189	Supply, delivery, installation and testing of following Sweeps of High Speed Energy Efficient A.C. Ceiling Fan complete with Fan Blades, Down Rod, Canopies & Capacitor etc. including supply of Sundry Materials, making connection from the suitable point outlet but excluding cost of Fan Regulator complete as required and as per the Direction of Engineer-In-Charge. \n1200 mm Sweep Ceiling Fan.		9	each
173	190	Supply, delivery, installation & testing of Electronic type Stepped Fan Regulator fixed on Existing Sheet Metal Switch Board including interconnections and making good the damages caused complete as required and as per Direction of Engineer-In-Charge.		9	each
174	191	Supply, delivery, installation & testing of following Sweep & Speed Exhaust Fan on Existing Sheet Metal Switch Board including loop connections and making good the damages caused complete as required and as per direction of Engineer-in-charge.300 mm Sweep, 900 RPM.		5	each
175	192	Wall Fan		12	each
176	193	EARTHING:\n\nSupply of materials and installation of Pipe Earth Electrode made out of 50 mm dia class B G.I. Pipe of 3.0 meter long with arrangements for Fitting/ Termination of G.I. Flat / Wire with G. I. Nut Bolts and Washers including cost of Burnt Wood Charcoal, Salt, Foreign Soil, Water Pouring arrangements Brick Masonry enclosure on top with removable RCC Cover complete with labour for excavation of Pit in all kinds of Soil and Rock as required and as per Direction of Engineer-In-Charge.		4	each
177	194	Supply of materials and laying Underground / Floor / Wall including making end termination and testing of 8 SWG G.I. Wire for Loop Earthing of Equipment’s, Switch Boards & Panels as required complete as per Direction of Engineer-In-Charge.		120	mtr
178	195	Supply of materials and laying on Ceiling/ Column/ Wall or Buried Under Ground including saddling & making connection at both ends and testing with following size of Hot Dip Galvanized Iron Flats for Earth Termination and Earth Interconnection, making good the damages caused as required complete as per Direction of Engineer-In-Charge. 25 mm x 6 mm as Earthing Conductor.		120	mtr
179	196	25 mm x 5 mm GI Strip as Earthing Lead.		120	mtr
180	197	Lightning Protection System.\n\nSupply, Delivery, Installation, testing & commissioning of Early Steamer Emrission (ESE) Lightning Protection Airterminal Coupling with NFC-17-102 Standard (RP-45 mtrs.) including Air terminal Lighting Strike Counter Maintenance free Earthing - 2 Nos., 25 X 3 mm GI Flat etc.		1	each
181	198	MAIN PANEL BOARD:\n\nSupplying, Installing, Testing and Energizing MS Cubical type Panel Board made of 2 mm thick CRCA Sheet with Hinged Door duly Fabricated with required MS Angle and Channels of adequate size, duly treated and Powder Coated (shall have Hinged Door at the Front and Detachable Plates at Back if requirement and at Top / Bottom for Cable / Wire Entry / Exit as per the Direction of Engineer-In-Charge and approved GA Drawing with following provisions.With Incoming: 150 Amp. TPN SFU with HRC Fuse - 1 No., RYB Indicator - 1 Set, 150 amp. Eelctrolytic Copper Bus Bar - 4 Nos., PVC Heat Shrunk Sleeves coating, 200 /5 Amp. CT- 3 Nos., Digital Multifunctioning Meter-1 No. \nOutgoing:\n1Nos 63A C.O. Switch, 2Nos 63A 4P MCCB 20KA , 2Nos 125A 4P MCCB 36KA.		1	set
182	199	Common DG Panel.\n\nWith Incoming: 63 Amp. TPN SFU with HRC Fuse - 1 No., RYB Indicator - 1 Set, 100 amp. Eelctrolytic Copper Bus Bar - 4 Nos., PVC Heat Shrunk Sleeves coating.\nOutgoing:\n2Nos 40A 4P MCB 10KA , 1Nos 32A 2P MCB 10KA.		1	set
183	200	Meter Panel Panel.\n\nWith Incoming: 63 Amp. TPN SFU with HRC Fuse - 1 No., RYB Indicator - 1 Set, 100 amp. Eelctrolytic Copper Bus Bar - 4 Nos., PVC Heat Shrunk Sleeves coating.3Nos 100/5A CT, And 1Nos Digital Multi Meter.\nOutgoing:\n9Nos 32A 2P MCB 10KA , 9Nos 3Ph Digital Meter.		1	set
184	201	Supplying and laying of XLPE Aluminum Armmored UG Cable in Existing Trenches / all with Proper Saddling.70 mm2. 3.5 Core Cable (from Feeder Pillar to Main Panel Board).		60	mtr
185	202	16 mm2 4 Core Cable with 2 Nos. No. 8 Copper Wire (from Common Panel to Lift DB.		80	mtr
186	203	6 mm2 4 Core Cable with 2 Nos. No. 12 Copper Wire (from Common Panel to LDB for DG Supply.		50	mtr
187	204	25 mm2 4 Core Cable (from Main Panel Board to Common Main Panel Board).		80	mtr
188	205	End Conenction of above Cable. 0 mm2. 3.5 Core Cable End Connection.		4	set
189	206	16 mm2 4 Core Cable End Connection.		4	set
190	207	6 mm2 4 Core Cable End Connection.		10	set
191	208	35 mm2 4 Core Cable End Connection.		4	set
192	209	Supplying of following MaterialsFirst Aid Box.		2	set
193	210	Shock Treatment Chart (Odia / Hindi & English).		2	set
194	211	12 mm thick Rubber Mat.		12	sqm
195	212	ABS type Fire Extinguisher of 4.5 Kg.		4	set
196	213	Danger Board.		4	set
197	214	DG SET\n\nSupply of 62.5 KVA Silent type auto start and auto run Diesel Generating Set three Phase 415 V, 50 Hz, 1500 rpm Diesel engine with starter and water /liquid cooled along with control panel , fuel tank capacity of 150 - 200 liters, batteries with AMF control panel, compiling latest CPCV norms for exhust emission, etc. complete accessories as per specification as directected by the Engineer - in - Charge		1	each
198	215	Installation of each D.G set & AMF Panel Including supplying and fitting of required power cables, 4 nos. earthings with chamber and cover, copper flat(300mmx3mm), diesel@100ltr/unit, Including CC foundation as per the design (approved by the engineer in charge), including inspection fees and inspection by the competent authority in the govt.		1	each
199	216	Supplying and laying of 3 1/2 core, 120 sq mm or 150 Sq mm round multicore armoured cable of aluminium conductor,P.V.C insulated, inner sheath of P.V.C tape,then Galvanised strip rounded wire/strips armoured, P.V.C sheathed overall of 650/1100 volt grade conforming to Indian Standard specification: as amended upto date, duly fixed on the wall surface /in the Electrical Duct (all cost of the duct included) with the help of steel bars and saddles or clamps etc.from one point to another to connect DG set to the electrical control panel or any other required location inside project area etc. complete as directected by the Engineer - in - Charge		70	mtr
200	217	FIRE PUMP ROOM, HYDRANT & SPRINKLER SYSTEM EQUIPMENT\n\nSITC of Electrical Motor Driven Terrace Pump of Monobloc type capable to deliver 948 LPM at 36 Mtr head, 12.5 HP,3 Phase, 2 Pole, Make-Kirloskar, Model-KDS-1348, with CI Impeller & gland packing. SucX Del: 80X65\n\n(RATE INCLUDING SUPPLY AND INSTALLTION)		1	ecah
201	218	Supplying, installing, testing and commissioning of M.S. Pipes medium grade Jindal conforming to IS 1239 up to 150 mm and confirming to IS 3589,medium grade 200 mm dia, with painting, suitable type of supports, anchor fasteners, bolts nuts ( Galvanised), clamps, \"U\" bolt, malleable specials such as Reducers,Tees, elbows, flanges. Including cutting, Welding, fixing in / on walls, ceiling by using suitable supports etc, The quoted rate shall also include for chasing / chipping walls, making bore holes in walls / floor..(RATE INCLUDING SUPPLY AND INSTALLTION)100mm nominal dia		92	rmt
202	219	80mm nominal dia		4	rmt
203	220	40mm nominal dia		40	rmt
204	221	Supplying, installing, testing and commissioning of C.I. Non-return valves as per IS:5312( PN 16) swing check type with required flanges, nuts, bolts and gaskets etc. complete.(RATE INCLUDING SUPPLY AND INSTALLTION)\n\n100 mm nominal dia		1	each
205	222	Supplying, Installing, testing and commissioning CI butterfly valves as per BS 5155 ( PN 16) slim seal standared lever operated type with required flanges, nuts, bolts etc. complete..(RATE INCLUDING SUPPLY AND INSTALLTION)\n\n 100mm nominal dia		5	each
206	223	Supplying, installing, testing and commissioning of Gun metal/Brass forged chrome finished Ball valves with fittings of screwed end type.(RATE INCLUDING SUPPLY AND INSTALLTION)15mm dia		1	each
207	224	25mm dia.		5	each
208	225	Supply and installation of Pressure switches of suitable range for pumpsets with all Fittings like unions / colors / reducers etc.(RATE INCLUDING SUPPLY AND INSTALLTION)		1	set
209	226	Supply and installation of Pressure gauges of suitable range for pumpsets with all Fittings like unions / colors / reducers etc.		1	set
210	227	Supplying and fixing approved make 25mm dia. With automatic air release valve with unions etc. complete.(RATE INCLUDING SUPPLY AND INSTALLTION)		1	each
211	228	Supply, installation, testing and commissioning of Single headed hydrant valve as per IS 5290, made of SS with 63 mm dia instantaneous outletof 80 mm dia fanged inelt ,Blank caps , chain and hand wheels etc complete.Make-Newage(RATE INCLUDING SUPPLY AND INSTALLTION)		4	each
212	229	Supply, installation, testing and commissioning of 2 lengths of 15 M long, 63mm dia RRL hose with instataneuos couplings and Hoses shall be stored in side the hose cabinet.Make-Newage(RATE INCLUDING SUPPLY AND INSTALLTION)		8	each
213	230	Supply, installation, testing and commissioning of SS short branch pipe with nozzle.Make-Newage(RATE INCLUDING SUPPLY AND INSTALLTION)		4	each
214	231	Supply, installation, testing and commissioning of Hose reel drum of swinging type with 19mm dia Rubber braided hose of 30M. length with Gate valve ( upstream) and Shut off nozzle, complete.Make-Newage(RATE INCLUDING SUPPLY AND INSTALLTION)		4	each
215	232	Supply, installation, testing and commissioning of Hose box (30\"x24\"x10\") fabricated out of MS sheet with Glass glazed doors & Locking arrangements. The hose box capable of storing two Nos. of Fire Hoses & one branch pipe. Local Make(RATE INCLUDING SUPPLY AND INSTALLTION)		4	each
216	233	Supplying, installing and commissioning of fire brigade inlet inlet connection of 2 way . Make-Newage		1	each
217	234	Supplying, installing, testing and commissioning of Structural Steels (Angle: 25 X 25 mm & 40 X 40 mm, Channel: 50 x 100 x 50 mm, etc.)(RATE INCLUDING SUPPLY AND INSTALLTION)		50	kg
218	235	FIRE DETECTION & ALARM SYSTEM\n\n\nAddressable 2 loop FACP (Fire Control Panel) (Make-Honeywell/Bosch/Agni)(for commercial complex)(RATE INCLUDING SUPPLY AND INSTALLTION)		1	each
219	236	Supply of addressable multi sensor Smoke Detector. (Make-Honeywell/Bosch/Agni)(RATE INCLUDING SUPPLY AND INSTALLTION)		55	each
220	237	Beam detector(RATE INCLUDING SUPPLY AND INSTALLTION)		1	each
221	238	Supply of Addressable Manual Call Point. (Make-Honeywell/Bosch/Agni)(RATE INCLUDING SUPPLY AND INSTALLTION)		2	each
222	239	Supply of Hooter for addressable panel. (Make-Honeywell/Bosch/Agni)(RATE INCLUDING SUPPLY AND INSTALLTION)		2	each
223	240	2x1.5 sq mm flexible cable and accessories like, pvc conduit,clamp,screw etc.(RATE INCLUDING SUPPLY AND INSTALLTION)		500	mtr
224	241	PORTABLE FIRE EXTINGUISHERS Make-Cease Fire OR Securezone-warranted by Ceasefire\n\n\nSupplying & installing of ABC Powder (MAP-50) 6 Kg capacity Fire Extinguisher ,Stored Pressure Type with IS 15683 certification. squeezegrip operation,discharge range-2 mtr,A rating-3A, B rating-89B,can-mig welded,Epoxy polyster powder coated,confirming to BIS-15683, Warranty 3 yrs.(RATE INCLUDING SUPPLY AND INSTALLTION)		14	each
225	242	Water Type 9 ltr capacity(RATE INCLUDING SUPPLY AND INSTALLTION)		4	each
226	243	Foam Type Fire Extinguisher(RATE INCLUDING SUPPLY AND INSTALLTION)		1	each
227	244	Co2 Type Fire Extinguisher-4.5 kg capacity(RATE INCLUDING SUPPLY AND INSTALLTION)		4	each
228	245	Fire Bucket with stand (one stand for three buckets)(RATE INCLUDING SUPPLY AND INSTALLTION)		5	each
229	246	SAFETY SIGNAGE(RATE INCLUDING SUPPLY AND INSTALLTION)		15	each
230	247	CEILING HALL - 1\n(ANUTONE/THERMOFRIZ/OTHER REPUTED MAKE OF MAGNESIA BOARD PLAIN CEILING )\n\n\n\nSupply and Installation of Anutone/thermofriz/other reputed make of false ceiling 10 mm thick Tufbloc magnesium oxide HDFR boards of size 1200 x 2400 mm having Density-1000 kg/mt cube, with STC- 34 – 50, weight - 8.5 kg /sq mt, Fire Class - 1&P & Thermal Heat Resistance - 0.11792 W/mK Climate ( degree Centigrade , RH - 50,95 , Green VoC , RC% - Low & 30 Water resistant with wet expansion less than -0.02% from ambient to saturation, Moisture Movement - 0.02% from Anutone / Win Win / Magnum are to be fixed with Philips head screw is fixed by using concealed ceiling system. The concealed ceiling system shall include GI Wall channel(WC 25) having thickness 0.45 mm, length 3600 mm, unequal flanges of 15 & 20 mm and web of 22 mm should be fixed along the perimeters of the wall with nylon sleeves and suitable fasteners at every 300 mm centers. Then suspend Main channels(MC 45) having thickness 0.9 mm, length 3600 mm, equal flanges of 15 mm and web 45mm from the soffit at every 1200 mm centers with Suspender angle(SA 25) having thickness 0.45 mm, unequal flanges of 25 & 10 mm. GI Cross channel(CC 25) having thickness 0.45 mm, length 3600 mm, knurled web 35mm, depth of 25 mm and equal flanges 9.5 mm is fastened to the Main channel in the direction perpendicular to the Main Channel at every 600mm centers. Now the jointing & finishing of the same will be done by using Anutone jointing kit consist of powder mixed with water and apply the same with flat flap on the boards joints to finish the surface of the boards so as to look flush. Apply Anutone synthetic poly fiber PF 5 x 50 acoustic wool of 50 kg density to be kept on the top of the ceiling by laying on the framework. Test certificate of the use products shall be submitted after procurement of materials.		92	sqm
231	248	CEILING HALL - 2\n(CEILING WITH GRID SQUARE EDGE ANUTONE/THERMOFRIZ/OTHER REPUTED MAKE OF TILES 10 /20 PIXEL)\n\nSupply and Installation of Anutone/thermofriz/other reputed make of 12.5 mm gypsum perforated square edge 10/20 ( 10 mm square perforated 20 mm pitch TOA - 15 % ) gypsum tiles having the technical parameters are as follows : Core - GFR gypsum, Fire – Class A & P, Acoustics – NRC 0.80,Climate (degree C RH) – 50, 90, Light reflectance 80 %,Green (RC %) – 25, Hygiene (VoC, Clean room) – Low , having pixel size 10X10 mm square perforated at 20 mm center tile of size 595 x 595 x 12.5 mm having density 700 Kgs/ m3, weight - 8 kg/m2 which will be suspended from main ceiling by using 0.4 mm wire thick and the help of T 24 channels whose thickness will be for main T - 24 x 38 x 0.3 x 3600 , cross T - 24 x 25 x 0.3 x 1200 mm , Cross T - 24 x 25 x 0.3 x 600 mm & wall angel of size - 24 x 24 x 0.4 x 3000 mm precoated metal . The grid system of 600 x 600 mm module shall be maintained for laying.Now gypsum square edge tiles of size 595 x 595 x 12.5 mm thick shall be placed into the grid size of 600 x 600 mm. Ensure arrow marks behind gypsum pixel square panels are oriented in one direction to achieve uniform looks.Test certificate of the use products shall be submitted after procurement of materials.		138	sqmt
232	249	WALL PANELING WITH WOODEN ANUTONE/THERMOFRIZ/OTHER REPUTED MAKE OF SLAT HDF PLANK \n\n\n\nSupply & installation of wall paneling of Anutone/thermofriz/other reputed make of slats surco high density fiberboard made out of pure pinewood particles , Fire Resistance - Pink in colour core with 5 test Fire Resistance BS 476 part 5 , BS 476 part 6 , BS 476 part 7 ISO 1182 ASTM E662 Smoke Density - Melamine laminated finish, perforated wooden grooved HDF slats L16-2 (2 mm grooves @ 8 mm centers),tongue-groove edge for a seamless look of lineal dimension size 128 mm x 2440 mm x 16 mm thick having density 700 Kg /m3, weight -9 Kgs/m2 with back fleecs from soundtex Germany nonwoven acoustic to be pasted on slats surco is to be installed by using GI strut system. The technical parameters are as follows Core Variants - Fiberboard, Climate (OC RH) – 50, 70 Light reflectance – 75%,Green (RC %) – 25, Hygiene (VoC, Clean room) – Low, Class 1,Strength, Load capacity (Kg) - Anti sag, Ball-Impact. The concealed wall paneling system shall include GI Wall channel (WC25) having thickness 0.45mm, length 3600mm, unequal flanges of 15 & 20mm and web of 25mm should be fixed along the perimeters of the wall with nylon sleeves and suitable fasteners at every 300mm centers. Then fixed Main channels (MC45) having thickness 0.9mm, length 3600mm, equal flanges of 15mm and web 45mm from the side wall & fixed at every 1200mm centers with GI cross channel(CC25) having thickness 0.45mm, length 3600mm, knurled web 35mm, depth of 25mm and equal flanges 9.5mm is fastened to the Main channel in the direction perpendicular to the Main Channel at every 600mm centers. The framework will maintain 50 / 75 mm gap from the walls. Now clad the wooden slats surco on the CC 18 with the help of center & edge clips to get better locking of slats. The tongue & groove are to be properly aligned to get flush look . Synth poly fiber Anutone PF 5 x 50 wool of 500 gsm to be filled between the horizontal & vertical studs as in filler with the help of wire / stick 7 adhesive. Test certificate of the use products shall be submitted after procurement of materials		62	sqmt
233	250	WALL PANELING ANUTONE STRETCH FABRIC HUSH/NRC\n\n\nSupply and installation of Anutone/thermofriz/other reputed make of Stretchable acoustical fabric HUSH / NRC fabric system by using FR Grade NRC fabric of size 1700 mm width, shall be stretched by using wooden base 10 mm thick rigid vinyl stretch tracks half wrap/ full wrap 15 mm FS15 & mid seam 15 mm FS 15, 15 mm pinewood magnesia bonded Strand board, Synthetic poly fiber 5x50 infill with requisite accessories & tools. Pinewood wood based wool fiber having 15 mm thick square edge is first installed on the wall along the marking lines with metal fasteners inserted at 300 mm centers FS 15 tracks to be installed on wooden base after applying stick S7 adhesive on both surfaces for a true & continuous secure grip, & heavy - duty fasteners at 150 mm centers on both sides of stretch tracks. Pinewood wool panels having square edge Magnesite bonded pinewood fibers panels of size 600 x 1200 x15 mm having density 400 Kg /m3 , weight 4 kg which is fixed to GI Channel CC25 on walls placed at 600 mm centers vertically / Horizontally with suitable fasteners with MC 45 at 1200 c/c & WC 25 is for supporting the main frame. . Anutone Synthetic poly fiber PF 5 x 50 mm thick adhered on strand tracks by following the fabric thread line or pattern. The fabric NRC is stretched & tucked into the stretch tracks & secure into the locking jaws so that it will be smooth, free of wrinkles with the tucking tools. Note - minimum 50 mm additional fabric is required for tucking hence maximum module wall fabric width would be 1600 mm The technical parameters of the system are core - pinewood fibre & polyfiber Fire - 1 Acoustic - NRC 0.85 Climate OCRH - 49, 90 Termite resistance - yes , light reflectance - colour dependant , Green RC % - 25 , Hygiene ( Voc , Clean room ) - Low , Class 1. Test certificate will be submitted after procurement of materials.		188	sqm
234	251	WALL PANELING WITH COLOUR ANUTONE /THERMOFRIZ/OTHER REPUTED MAKE OFPINE WOOD WOOL PANEL (STRAND) \n\n\nSupply and installation of Anutone/thermofriz/other reputed make of 20 mm thick pinewood wool magnesia bonded colour tiles / panels from selected colours ( ref colour chart ) square edge having fibers panels of size 600 X 1200 / 2400 x 20 mm having density 400 kg/m3,weight 8 kg/m 2 installed by using GI strut system. The GI strut work includes Ceiling channel (CC 50) having thickness 0.45 mm, length 3600 mm, knurled web 50, depth 50 mm and equal flanges of 13 mm is fastened to Wall positioned horizontally in a regular manner at 600 mm centers . Then panels to be fixed on the cross channels CC 50 with suitable fastener . Fasteners to be countersunk & painted finished with suitable colours . Panels shall be back lined with acoustical infill of anutone Synthetic poly fiber PF 10 x 10 mm thick adhered to the wall using stick 7 adhesive . Technical Parameters of the panels are : Core Variants -pinewood fiber, Fire - Class 1 & P , Acoustic - NRC 0.95 , Climate (OC RH ) - 50,90 , termite resistance - Yes , light reflectance - color dependent , Green - (RC%) - 10 , Hygiene (Vo C,Clean room) - Low , Strength - Load capacity (Kg ) - ball impact Test certificate will be submitted after procurement of materials. Test certificate of the use products shall be submitted after procurement of materials.		85	sqmt
235	252	CEILING IN GRID ANUTONE/THERMOFRIZ/OTHER REPUTED MAKE OF STRAND TILES COLOUR \n\n\n\nSupply and Installation of Anutone/thermofriz/other reputed make of strand wood wool fiber colour tiles square edge Magnesia bonded pinewood fibre/ dust core ceiling tiles of size 595x595x15mm having density 600 kgs/m3, weight 9-12 kg/m2 which is suspended by using 0.35mm thick and 24 mm wide pre coated metal skelet trelis T 24 HD powder coated grid system.The technical parameters are as follows : Core - Pinewood particle, Fire – Class 1 & P, Acoustics – NRC upto 0.9, Climate (OC RH) – 50, 90, Termite resistance ,Light reflectance – Low light reflective,Green (RC %) – 25,Hygiene (VoC, Clean room) – Low, Class 3, Strength, Load capacity (Kg) - Antisag, Ball-Impact. The T24 HD Grid system of 600 x 600 mm module shall include wall angle (WA 24x 20 x 3000 mm) , 0.43mm thick fixed along the periphery of walls with the help of nylon sleeves and suitable fasteners at 300mm centers. Then suspend the Main T 24 x 32 x 3600 x0.35 mm from the soffit with the help of soffit cleat and wire rod along with leveling spring clip at 1200mm c/c. Cross T 24x 32x1200 x0.35mm is then interlocked into the pre-cut slots in the Main T 24 at 600mm centers in the direction perpendicular to the Main T24. Finally, Cross T24 (24 x 32 x 600 mm ) are then interlocked into the pre cut slots in the 1200mm Cross T24 at 1200mm centers and in direction parallel to the Main T24. Wood wool square edge of size 595 x 595 x 15 mm thick shall be placed into the grid size of 600 x 600 mm. Apply synthetic poly fiber PF 5x25 acoustic wool of 50 kg density to be kept on the top of the wooden ceiling by laying on the framework.Test certificate will be submitted after procurement of materials.		74	sqmt
236	253	The Total value of Schedule1	BI01010001010000000000000515BI0100001128	1	Nos
237	254	The Total value of Schedule4	BI01010001010000000000000515BI0100001129	1	Nos

Need a Bussiness Loan? Apply Now!
Buy Digital Signature
Bidding Support

Also Visit

Tenders

Odisha Tenders

Construction Tenders

Building Construction Tenders

Auditorium Construction Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Construction Of Auditorium At Sunabeda Municipality Construction Of Auditorium, Sunabeda-Odisha

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Construction Of Auditorium At Sunabeda Municipality Construction Of Auditorium, Sunabeda-Odisha

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us