Irrigation Department has published Dtpc-Additional Facilities For Prakrithi Gramam , Ezhattumugham - 2Nd Phase Ernakulam District . Dtpc-Additional Facilities For Prakrithi Gramam , Ezhattumugham 2Nd Phase- .. Submission Date for this Tender is 17-02-2021. Civil Work Tenders in Ezhattumugham Kerala. Bidders can get complete Tender details and download the document.
Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
1 | 08-Feb-2021 | Drawing | Other | 15-02-2021 |
2 | 15-Feb-2021 | Date extension | Date | 17-02-2021 |
Work Name:DTPC-Additional facilities for Prakrithi Gramam , Ezhattumugham - 2nd Phase- Ernakulam district. | |||||
---|---|---|---|---|---|
Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
1 | 1 | Entrance Area - Ramp to Transformer Area | BI01010001010000000000000515BI0100001113 | ||
2 | 1.01 | 2.7.1 : Earth work in excavation by mechanical means (Hydraulic excavator )/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.Ordinary rock | BI01010001010000000000000515BI0100001114 | 12.075 | cum |
3 | 1.02 | 7.1.1 : Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up to plinth level with:Cement mortar 1:6 (1 cement : 6 coarse sand) | BI01010001010000000000000515BI0100001115 | 59.025 | cum |
4 | 1.03 | 50.2.25.1 : Filling with contractor's own earth ( excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m as per direction of site Engineer-in-charge | BI01010001010000000000000515BI0100001116 | 61.758 | cum |
5 | 1.04 | 2.25 : Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m. | BI01010001010000000000000515BI0100001117 | 7.242 | cum |
6 | 1.05 | 16.68 : Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M - 30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. | BI01010001010000000000000515BI0100001118 | 60 | sqm |
7 | 1.06 | 13.33.1 : Pointing on stone work with cement mortar 1:3 ( 1 cement : 3 fine sand):Flush/ Ruled pointing | BI01010001010000000000000515BI0100001119 | 67.5 | sqm |
8 | 1.07 | 13.48.2 : Finishing with Deluxe Multi surface paint system for interiors and exteriors using primer as per manufacturers specifications:Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.75 ltr/10 sqm of approved brand and manufacture | BI01010001010000000000000515BI0100001120 | 67.5 | sqm |
9 | 2 | Protection Wall Around Transformer | BI01010001010000000000000515BI0100001121 | ||
10 | 2.01 | 2.7.1 : Earth work in excavation by mechanical means (Hydraulic excavator )/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.Ordinary rock | BI01010001010000000000000515BI0100001122 | 1.08 | cum |
11 | 2.02 | 4.1.4 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 )1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size) | BI01010001010000000000000515BI0100001123 | 1.08 | cum |
12 | 2.03 | 16.19 : Supplying at site Angle iron post & strut of required size including bottom to be split and bent at right angle in opposite direction for 10 cm length and drilling holes upto 10 mm dia. etc. complete. | BI01010001010000000000000515BI0100001124 | 14.4 | kilogram |
13 | 2.04 | 16.70.2 : Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts , bolts and washers as required complete as per the direction of Engineer-in- charge.Made of G.I wire of dia 4 mm. PVC coated to achieve outer dia. not less than 5 mm in required colour and shade | BI01010001010000000000000515BI0100001125 | 24 | sqm |
14 | 3 | Compound Wall | BI01010001010000000000000515BI0100001126 | ||
15 | 3.01 | 14.1.2 : Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground within 50 meters lead:Cement mortar 1:4 ( 1 cement: 4 coarse sand) | BI01010001010000000000000515BI0100001127 | 92.488 | sqm |
16 | 3.02 | 13.45.1 : Finishing walls with textured exterior pint of required shade:New work (Two or more coats applied @ 3.28 ltr/ 10 sqm ) over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm | BI01010001010000000000000515BI0100001128 | 747.922 | sqm |
17 | 4 | Walkway Floor Tiling At Children's Play Area | BI01010001010000000000000515BI0100001129 | ||
18 | 4.01 | 15.23.1 : Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.For thickness of tiles 10 mm to 25 mm | BI01010001010000000000000515BI0100001130 | 15.525 | sqm |
19 | 4.02 | 15.2.1 : Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in-Charge.Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) | BI01010001010000000000000515BI0100001131 | 2.484 | cum |
20 | 4.03 | 4.1.4 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 )1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size) | BI01010001010000000000000515BI0100001132 | 2.76 | cum |
21 | 4.04 | 11.20.1 : Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete on 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 coarse sand).Light shade pigment using white cement | BI01010001010000000000000515BI0100001133 | 27.6 | sqm |
22 | 5 | Repair and additional works to existing toilet block & Extension for Toilet Block | BI01010001010000000000000515BI0100001134 | ||
23 | 5.01 | 15.7.4 : Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.In cement mortar | BI01010001010000000000000515BI0100001135 | 4.059 | cum |
24 | 5.02 | 15.12.1 : Dismantling doors, windows and clerestory windows (steel or wood ) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead:Of area 3 sq. metres and below | BI01010001010000000000000515BI0100001136 | 1 | each |
25 | 5.03 | 14.1.2 : Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground within 50 meters lead:Cement mortar 1:4 ( 1 cement: 4 coarse sand) | BI01010001010000000000000515BI0100001137 | 3.213 | sqm |
26 | 5.04 | 15.28.1 : Dismantling roofing including ridges, hips, velleys and gutters etc., and stacking the material within 50 metres lead of :G.S. Sheet | BI01010001010000000000000515BI0100001138 | 68.721 | sqm |
27 | 5.05 | 15.18 : Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates,boltd, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead. | BI01010001010000000000000515BI0100001139 | 75 | kg |
28 | 5.06 | 50.10.1 : Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | BI01010001010000000000000515BI0100001140 | 744.977 | kg |
29 | 5.07 | od41057/2020_2021/P2 : Roofing with shingles on cement base board 12 mm thick including mystique, water proofing material bitumen membrane, ridges,starter etc of approced brand and manufacture (Scaffs or equivalent) including providing Hip and range, valley gutter etc.,including fixing cement board and shingles as per approved practice etc. as per site requirements and directed by the Engineer in charge | BI01010001010000000000000515BI0100001141 | 68.721 | sqm |
30 | 5.08 | 2.7.1 : Earth work in excavation by mechanical means (Hydraulic excavator )/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.Ordinary rock | BI01010001010000000000000515BI0100001142 | 6.149 | cum |
31 | 5.09 | 4.1.4 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 )1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size) | BI01010001010000000000000515BI0100001143 | 0.968 | cum |
32 | 5.1 | 7.1.1 : Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up to plinth level with:Cement mortar 1:6 (1 cement : 6 coarse sand) | BI01010001010000000000000515BI0100001144 | 8.058 | cum |
33 | 5.11 | 50.2.25.1 : Filling with contractor's own earth ( excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m as per direction of site Engineer-in-charge | BI01010001010000000000000515BI0100001145 | 2.668 | cum |
34 | 5.12 | 2.25 : Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m. | BI01010001010000000000000515BI0100001146 | 4.01 | cum |
35 | 5.13 | 4.1.6 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:3:6 ( 1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) | BI01010001010000000000000515BI0100001147 | 0.78 | cum |
36 | 5.14 | 50.6.1.1 : Solid block masonry using pre cast solid blocks ( factory made) of size 40x20x20cm or nearest available size confirming to IS 2185 part 1 of 1979 for foundation and plinth with thickness 20 cm and above in: CM 1:6 ( 1 cement : 6 coarse sand) etc complete | BI01010001010000000000000515BI0100001148 | 8.001 | cum |
37 | 5.15 | 5.9.5 : Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers | BI01010001010000000000000515BI0100001149 | 3.963 | sqm |
38 | 5.16 | 5.9.3 : Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform | BI01010001010000000000000515BI0100001150 | 29.92 | sqm |
39 | 5.17 | 5.3 : Reinforced cement concrete work in beams, suspended floors, roofs, having slope up to 15<sup>0</sup> landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement, with1:1.5:3 (1 cement : 1.5 coarse sand (Zone III) : 3 graded stone aggregate 20 mm nominal size). | BI01010001010000000000000515BI0100001151 | 3.218 | cum |
40 | 5.18 | 5.22.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more | BI01010001010000000000000515BI0100001152 | 280.665 | kilogram |
41 | 5.19 | 5.30 : Add for plaster drip course / groove in plastered surface or moulding to R.C.C. projections. | BI01010001010000000000000515BI0100001153 | 33.52 | metre |
42 | 5.2 | 8.2.2.2 : Providing and fixing 18 mm thick gang saw cut, mirror, polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 ( 1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Area of slab over 0.50 sqm | BI01010001010000000000000515BI0100001154 | 1.632 | sqm |
43 | 5.21 | 8.3.2 : Providing edge moulding to 18 mm thick marble stone counters, vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer -in-Charge.Granite work | BI01010001010000000000000515BI0100001155 | 2.7 | metre |
44 | 5.22 | 9.141 : Providing and fixing PVC Door Frame of size 50x47 mm with a wall thickness of 5 mm (±0.2mm), made out of single piece extruded PVC profile, with mitred cut joints and with 2 nos of PVC bracket of size 190 mm x 100 mm long arms of cross section size 35 x 15 mm & self driven self taping screws, the vertical door profiles to be reinforced with 40x20 mm M.S. rectangular tube of 0.8 mm, including providing EPDM rubber gasket weather seal throughout the frame, including jointing 5 mm PVC frame strip with PVC solvent cement on the back of the profile. The door frame to be fixed to the wall using 8x100 mm long anchor fasteners complete, all as per manufacturer's specification and direction of Engineer-in--charge. | BI01010001010000000000000515BI0100001156 | 33.6 | metre |
45 | 5.23 | 9.142.2 : 35 mm thick factory made Solid panel PVC Door shutter, made out of single piece extruded solid PVC ( ±0.2 mm) thick, having styles & rails (except lock rail ) of size 95 mmx 35 mm x 5 mm, out of which 75 mm shall be flat and 20 mm shall be tapered (on both side), having one side thickness of 15 mm integrally extruded on the hinges side of the profile for better screw holding power, including reinforcing with MS tube of size 40 mm x 20 mm x 1 mm, joints of styles & rails to be mitered cut & joint with the help of PVC solvent cement, self driven self tapping screws & M.S. rectangular pipes bracket of size 190 mm x 100 mm of cross section size 35 mm x 17 mm s 1 mm at each corner. Single piece extruded 5 mm thick solid PVC Lock rail of size 115 mm x 35 mm x 35 mm, out of which 95 mm to be flat and 20 mm to be tapered at both ends, having 15 mm solid core in middle of rail section integrally extruded, fixing the styles & rails with the help of solvent and self driven self tapping screws of 125 mm x 11 mm, including providing 5 mm Single piece solid PVC extruded sheet inserted in the door as panel, all complete as per manufacturer's specification and direction of Engineer-in-charge.Decorative finish (wood grained finish) | BI01010001010000000000000515BI0100001157 | 8.82 | sqm |
46 | 5.24 | 21.1.1.2 : Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron) | BI01010001010000000000000515BI0100001158 | 6.195 | kg |
47 | 5.25 | 21.1.2.3 : For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micorn) | BI01010001010000000000000515BI0100001159 | 5.25 | kg |
48 | 5.26 | 21.3.1 : Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness | BI01010001010000000000000515BI0100001160 | 1.35 | sqm |
49 | 5.27 | 9.48.1 : Providing and fixing M.S. Grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to steel windows by welding | BI01010001010000000000000515BI0100001161 | 27 | kg |
50 | 5.28 | 11.41.2 : Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600 x 600 mm. | BI01010001010000000000000515BI0100001162 | 11.846 | sqm |
51 | 5.29 | 11.36 : Providing and fixing I st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer -in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. | BI01010001010000000000000515BI0100001163 | 32.208 | sqm |
52 | 5.3 | 50.13.1 : 9 mm cement plastering of mix : 1:3 (1 cement : 3 fine sand ) including all cost of materials, labour charges etc complete | BI01010001010000000000000515BI0100001164 | 13.535 | sqm |
53 | 5.31 | 13.4.1 : 12 mm cement plaster of mix:1:4 ( 1 cement : 4 coarse sand) | BI01010001010000000000000515BI0100001165 | 84.98 | sqm |
54 | 5.32 | od38381/2020_2021/P2 : Granite stone work (machine cut edges) for wall lining etc. upto 10 metre height , backing filled with a grout of average 12 mm thick cement mortar 1:3 ( 1 cement: 3 coarse sand) including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade using stone boulder 50 mm to 200 mm as per site requirements & directed by the Engineer in charge. | BI01010001010000000000000515BI0100001166 | 36.356 | sqm |
55 | 5.33 | 13.43.1 : Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer | BI01010001010000000000000515BI0100001167 | 13.535 | sqm |
56 | 5.34 | 13.48.2 : Finishing with Deluxe Multi surface paint system for interiors and exteriors using primer as per manufacturers specifications:Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.75 ltr/10 sqm of approved brand and manufacture | BI01010001010000000000000515BI0100001168 | 89.075 | sqm |
57 | 5.35 | od38517/2020_2021/P2 : Providing wall mounted cubicle system with compact laminate 12 mm with single colour HPL board for toilet with over all height of 2105 mm (including bottom gap of 150 mm ) with standard section accessories such as aluminium U channel powder coated, aluminium door stoper channel , H sections, top rail with wall bracket , S.S hook(304), S.S privacy thump occupancy indicator, excess door knob, S.S hinges with cover, rubber door topper lining, excess screws, PVC wall plugs etc. complete as per drawing as per site requirements & directed by the Engineer in charge. | BI01010001010000000000000515BI0100001169 | 8 | each |
58 | 5.36 | od38634/2020_2021/P2 : Providing Wall mounted cubicle system with compact laminate 12 mm with single colour HPL board for urinal partition of size 450 mm(width) and 1195 mm (height) stainless steel (304 L) with standard section accessories complete as per drawing and as per site requirements & directed by the Engineer in charge | BI01010001010000000000000515BI0100001170 | 6 | each |
59 | 5.37 | od38382/2020_2021/P2 : Providing and fixing floor mounted , white vitreous china single piece, water closet of approved brand/make, shape, size and pattern ( cat No: S 1012135 of CERA make or equivalent) including integrated white vitreous china cistern, all fittings and fixtures with seat cover (Cat No: B 1520118 of CERA make or equivalent) cistern fittings nuts , bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per site requirements and per directions of Engineer in charge | BI01010001010000000000000515BI0100001171 | 7 | each |
60 | 5.38 | od38383/2020_2021/P2 : Providing and fixing white vitreous china wash basin size 460 x 350 mm (Cat No: S 2040139 of CERA make or equivalent) with chime half pedestal (Cat No: S 2090128 of CERA make or equivalent) with a chrome plated brass clinical single lever basin mixer(Cat No: F 9030451 of CERA make or equivalent) with C. P. Brass waste 32mm and C.I. bracket for wash basin and sinks complete in all respect as per site requirements and directions of Engineer in charge | BI01010001010000000000000515BI0100001172 | 5 | each |
61 | 5.39 | od38640/2020_2021/P2 : Supplying and installation of hand dryer with corrosion proof, eco friendly material like dolphy brand or equivalent , two waves ,automatic in all respect as per site requirements and directions of Engineer in charge | BI01010001010000000000000515BI0100001173 | 3 | each |
62 | 5.4 | 17.72 : Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms | BI01010001010000000000000515BI0100001174 | 10 | each |
63 | 5.41 | 17.31 : Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. | BI01010001010000000000000515BI0100001175 | 5 | each |
64 | 5.42 | 17.32.4 : Providing and fixing mirror of superior glass ( of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :Rectangular shape 1500x450 mm | BI01010001010000000000000515BI0100001176 | 3 | each |
65 | 5.43 | 17.71 : Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms | BI01010001010000000000000515BI0100001177 | 13 | each |
66 | 5.44 | 18.49.1 : Providing and fixing C.P brass bib cock of approved quality conforming to IS: 8931.15 mm nominal bore | BI01010001010000000000000515BI0100001178 | 20 | each |
67 | 5.45 | 17.70.1 : Providing and fixing PTMT Bottle Trap for Wash basin and sink.Bottle trap 31 mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the center of the waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less than 260 gms | BI01010001010000000000000515BI0100001179 | 6 | each |
68 | 5.46 | 17.34.1 : Providing and fixing toilet paper holder:C.P. brass | BI01010001010000000000000515BI0100001180 | 8 | no |
69 | 5.47 | 50.17.1.2 : Supplying and fixing CP Towel rod 45cm or nearest available length including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge. | BI01010001010000000000000515BI0100001181 | 15 | no |
70 | 5.48 | 18.7.1 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge. Internal work - Exposed on wall15 mm nominal outer dia pipes | BI01010001010000000000000515BI0100001182 | 15 | metre |
71 | 5.49 | 18.7.2 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge. Internal work - Exposed on wall20 mm nominal outer dia pipes | BI01010001010000000000000515BI0100001183 | 15 | metre |
72 | 5.5 | 18.7.4 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge. Internal work - Exposed on wall32 mm nominal outer dia pipes | BI01010001010000000000000515BI0100001184 | 15 | metre |
73 | 5.51 | 18.7.6 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge. Internal work - Exposed on wall50 mm nominal outer dia pipes | BI01010001010000000000000515BI0100001185 | 15 | metre |
74 | 5.52 | 50.18.7.2.2 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge 20 mm dia 10 Kgf/cm2- Internal work - Exposed on wall | BI01010001010000000000000515BI0100001186 | 30 | metre |
75 | 5.53 | 50.18.7.5.1 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 40 mm dia 10 Kgf/cm2- Internal work- exposed on wall | BI01010001010000000000000515BI0100001187 | 50 | metre |
76 | 5.54 | 50.18.8.6.1 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 50 mm pipe 10 kgf/cm2 | BI01010001010000000000000515BI0100001188 | 30 | metre |
77 | 5.55 | 50.18.9.9.1 : Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of Joints complete as per direction of engineer in charge.110 mm dia 6Kgf/cm2 | BI01010001010000000000000515BI0100001189 | 50 | metre |
78 | 5.56 | 50.18.9.16.2 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 50 mm dia 6Kgf/cm2 - External work - Exposed on wall | BI01010001010000000000000515BI0100001190 | 50 | metre |
79 | 5.57 | 50.18.9.19.1 : Providing and fixing PVC pipes including fixing the pipe with clamps/ clips/ at 1.00 m spacing . This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 110 mm dia 6 Kgf/cm2 - External work- Exposed on wall | BI01010001010000000000000515BI0100001191 | 50 | metre |
80 | 5.58 | 50.18.9.17.1 : Providing and fixing PVC pipes including fixing the pipe with clamps/ clip at 1.00 m spacing . This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 63 mm dia 6 Kgf/cm2 - External work - Exposed on wall | BI01010001010000000000000515BI0100001192 | 50 | metre |
81 | 5.59 | 50.18.9.20.2 : Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement -63 dia 45 degree Elbow | BI01010001010000000000000515BI0100001193 | 5 | no |
82 | 5.6 | 50.18.9.20.4 : Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 63 mm dia Bend | BI01010001010000000000000515BI0100001194 | 5 | no |
83 | 5.61 | 50.18.9.20.10 : Providing and fixing PVC moulded fittings/accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 63x50 mm dia Reducer | BI01010001010000000000000515BI0100001195 | 5 | no |
84 | 5.62 | 50.18.9.22.4 : Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement- 110 mm dia Bend | BI01010001010000000000000515BI0100001196 | 5 | no |
85 | 5.63 | 50.18.9.22.8 : Providing and fixing PVC moulded fittings /accessories for Rigid PVC pipes, including jointing with PVC solvent cement -110 mm dia Vent cowl | BI01010001010000000000000515BI0100001197 | 2 | no |
86 | 5.64 | 50.18.9.22.10 : Providing and fixing PVC moulded fittings/accessories for Rigid PVC pipes, including jointing with PVC solvent cement -110 mm dia End Cap | BI01010001010000000000000515BI0100001198 | 5 | no |
87 | 5.65 | 50.18.9.20.6 : Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement -63x63x63 mm dia Door Tee | BI01010001010000000000000515BI0100001199 | 5 | no |
88 | 5.66 | 17.80 : Providing and fixing white vitreous china battery based infrared sensor operated urinal of approx.size 610x390x370 mm having pre & post flushing with water ( 250 ml & 500 ml consumption), having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of Engineer - in-charge. | BI01010001010000000000000515BI0100001200 | 6 | each |
89 | 5.67 | 50.17.1.5 : Supplying and fixing CP Health Faucet superior quality ( Jagur or equvalent make ) including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge. | BI01010001010000000000000515BI0100001201 | 7 | no |
90 | 6 | Gent's Changing room near DA toilet block area | BI01010001010000000000000515BI0100001202 | ||
91 | 6.01 | 2.7.1 : Earth work in excavation by mechanical means (Hydraulic excavator )/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.Ordinary rock | BI01010001010000000000000515BI0100001203 | 9.098 | cum |
92 | 6.02 | 4.1.4 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 )1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size) | BI01010001010000000000000515BI0100001204 | 1.011 | cum |
93 | 6.03 | 7.1.1 : Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up to plinth level with:Cement mortar 1:6 (1 cement : 6 coarse sand) | BI01010001010000000000000515BI0100001205 | 6.704 | cum |
94 | 6.04 | 2.25 : Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m. | BI01010001010000000000000515BI0100001206 | 5.911 | cum |
95 | 6.05 | 4.1.6 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:3:6 ( 1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) | BI01010001010000000000000515BI0100001207 | 0.928 | cum |
96 | 6.06 | 50.6.1.1 : Solid block masonry using pre cast solid blocks ( factory made) of size 40x20x20cm or nearest available size confirming to IS 2185 part 1 of 1979 for foundation and plinth with thickness 20 cm and above in: CM 1:6 ( 1 cement : 6 coarse sand) etc complete | BI01010001010000000000000515BI0100001208 | 5.53 | cum |
97 | 6.07 | 5.9.5 : Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers | BI01010001010000000000000515BI0100001209 | 6.792 | sqm |
98 | 6.08 | 5.9.3 : Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform | BI01010001010000000000000515BI0100001210 | 22.845 | sqm |
99 | 6.09 | 5.3 : Reinforced cement concrete work in beams, suspended floors, roofs, having slope up to 15<sup>0</sup> landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement, with1:1.5:3 (1 cement : 1.5 coarse sand (Zone III) : 3 graded stone aggregate 20 mm nominal size). | BI01010001010000000000000515BI0100001211 | 2.992 | cum |
100 | 6.1 | 5.22.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more | BI01010001010000000000000515BI0100001212 | 249.105 | kilogram |
101 | 6.11 | 5.30 : Add for plaster drip course / groove in plastered surface or moulding to R.C.C. projections. | BI01010001010000000000000515BI0100001213 | 15 | metre |
102 | 6.12 | 21.1.1.2 : Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron) | BI01010001010000000000000515BI0100001214 | 4.956 | kg |
103 | 6.13 | 21.1.2.3 : For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micorn) | BI01010001010000000000000515BI0100001215 | 4.2 | kg |
104 | 6.14 | 21.3.1 : Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness | BI01010001010000000000000515BI0100001216 | 1.08 | sqm |
105 | 6.15 | 9.48.1 : Providing and fixing M.S. Grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to steel windows by welding | BI01010001010000000000000515BI0100001217 | 21.6 | kg |
106 | 6.16 | 11.41.2 : Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600 x 600 mm. | BI01010001010000000000000515BI0100001218 | 11.559 | sqm |
107 | 6.17 | 11.36 : Providing and fixing I st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer -in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. | BI01010001010000000000000515BI0100001219 | 34.77 | sqm |
108 | 6.18 | 50.13.1 : 9 mm cement plastering of mix : 1:3 (1 cement : 3 fine sand ) including all cost of materials, labour charges etc complete | BI01010001010000000000000515BI0100001220 | 47.635 | sqm |
109 | 6.19 | 13.4.1 : 12 mm cement plaster of mix:1:4 ( 1 cement : 4 coarse sand) | BI01010001010000000000000515BI0100001221 | 69.96 | sqm |
110 | 6.2 | od38381/2020_2021/P2 : Granite stone work (machine cut edges) for wall lining etc. upto 10 metre height , backing filled with a grout of average 12 mm thick cement mortar 1:3 ( 1 cement: 3 coarse sand) including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade using stone boulder 50 mm to 200 mm as site persite requirements & directed by the Engineer in charge. | BI01010001010000000000000515BI0100001222 | 29.445 | sqm |
111 | 6.21 | 13.43.1 : Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer | BI01010001010000000000000515BI0100001223 | 47.635 | sqm |
112 | 6.22 | 13.48.2 : Finishing with Deluxe Multi surface paint system for interiors and exteriors using primer as per manufacturers specifications:Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.75 ltr/10 sqm of approved brand and manufacture | BI01010001010000000000000515BI0100001224 | 47.635 | sqm |
113 | 6.23 | od38517/2020_2021/P2 : Providing wall mounted cubicle system with compact laminate 12 mm with single colour HPL board for toilet with over all height of 2105 mm (including bottom gap of 150 mm ) with standard section accessories such as aluminium U channel powder coated, aluminium door stoper channel , H sections, top rail with wall bracket , S.S hook(304), S.S privacy thump occupancy indicator, excess door knob, S.S hinges with cover, rubber door topper lining, excess screws, PVC wall plugs etc. complete as per drawingas and as per site requirements & directed by the Engineer in charge. | BI01010001010000000000000515BI0100001225 | 3 | each |
114 | 6.24 | 17.72 : Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms | BI01010001010000000000000515BI0100001226 | 6 | each |
115 | 6.25 | 17.31 : Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. | BI01010001010000000000000515BI0100001227 | 3 | each |
116 | 6.26 | 17.32.4 : Providing and fixing mirror of superior glass ( of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :Rectangular shape 1500x450 mm | BI01010001010000000000000515BI0100001228 | 3 | each |
117 | 7 | Protection wall on river bank | BI01010001010000000000000515BI0100001229 | ||
118 | 7.01 | 2.7.1 : Earth work in excavation by mechanical means (Hydraulic excavator )/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.Ordinary rock | BI01010001010000000000000515BI0100001230 | 3.645 | cum |
119 | 7.02 | 4.1.4 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 )1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size) | BI01010001010000000000000515BI0100001231 | 3.645 | cum |
120 | 7.03 | 16.19 : Supplying at site Angle iron post & strut of required size including bottom to be split and bent at right angle in opposite direction for 10 cm length and drilling holes upto 10 mm dia. etc. complete. | BI01010001010000000000000515BI0100001232 | 40.5 | kilogram |
121 | 7.04 | 16.70.2 : Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts , bolts and washers as required complete as per the direction of Engineer-in- charge.Made of G.I wire of dia 4 mm. PVC coated to achieve outer dia. not less than 5 mm in required colour and shade | BI01010001010000000000000515BI0100001233 | 78 | sqm |
122 | 7.05 | 16.69 : Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature jointed with cement mortar 1:3 ( 1 cement : 3 coarse sand) , including making joints with or without grooves ( thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge ( length of finished kerb edging shall be measured for payment ). ( Precast C.C. kerb stone shall be approved by Engineer-in-Charge) | BI01010001010000000000000515BI0100001234 | 5.2 | cum |
123 | 8 | Walk way floor tiling at river bank | BI01010001010000000000000515BI0100001235 | ||
124 | 8.01 | 15.24 : Demolishing dry brick pitching in floors, drains etc. including stacking serviceable material and disposal of unserviceable material with in 50 metes lead: | BI01010001010000000000000515BI0100001236 | 17.6 | cum |
125 | 8.02 | 2.6.1 : Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.All kinds of soil | BI01010001010000000000000515BI0100001237 | 108 | cum |
126 | 8.03 | 16.92 : Providing and fixing 10x10x7.50 cm Granite stone block hand cut and chisel dressed on top, for paving in floors, drains etc. laid over 20mm thick base mortar 1:4 (1 cement : 4 coarse sand) with joints 10 mm wide filled with same mortar including ruled pointing etc. complete as per direction of engineer-in-charge | BI01010001010000000000000515BI0100001238 | 540 | sqm |
127 | 9 | Eco shop | BI01010001010000000000000515BI0100001239 | ||
128 | 9.01 | 2.7.1 : Earth work in excavation by mechanical means (Hydraulic excavator )/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.Ordinary rock | BI01010001010000000000000515BI0100001240 | 1.914 | cum |
129 | 9.02 | 4.1.4 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 )1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size) | BI01010001010000000000000515BI0100001241 | 0.766 | cum |
130 | 9.03 | 7.1.1 : Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up to plinth level with:Cement mortar 1:6 (1 cement : 6 coarse sand) | BI01010001010000000000000515BI0100001242 | 2.819 | cum |
131 | 9.04 | 50.2.25.1 : Filling with contractor's own earth ( excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m as per direction of site Engineer-in-charge | BI01010001010000000000000515BI0100001243 | 1.535 | cum |
132 | 9.05 | 2.25 : Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m. | BI01010001010000000000000515BI0100001244 | 1.386 | cum |
133 | 9.06 | 4.1.6 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:3:6 ( 1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) | BI01010001010000000000000515BI0100001245 | 0.787 | cum |
134 | 9.07 | 50.6.1.1 : Solid block masonry using pre cast solid blocks ( factory made) of size 40x20x20cm or nearest available size confirming to IS 2185 part 1 of 1979 for foundation and plinth with thickness 20 cm and above in: CM 1:6 ( 1 cement : 6 coarse sand) etc complete | BI01010001010000000000000515BI0100001246 | 2.667 | cum |
135 | 9.08 | 50.10.1 : Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | BI01010001010000000000000515BI0100001247 | 621.578 | kg |
136 | 9.09 | od38380/2020_2021/P2 : Roofing with shingles in cement base board 12 mm thick including mystique, water proofing material bitumen membrane, ridges,starter of approced brand and manufacture (Scaffs or equivalent) including providing Hip and range, valley gutter etc.,including fixing cement board and shingles as per approved practice etc.as per site requirements and directed by the Engineer in charge | BI01010001010000000000000515BI0100001248 | 28.372 | sqm |
137 | 9.1 | 11.41.2 : Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600 x 600 mm. | BI01010001010000000000000515BI0100001249 | 10.484 | sqm |
138 | 9.11 | 11.36 : Providing and fixing I st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer -in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. | BI01010001010000000000000515BI0100001250 | 24.685 | sqm |
139 | 10 | STP | BI01010001010000000000000515BI0100001251 | ||
140 | 10.01 | 2.7.1 : Earth work in excavation by mechanical means (Hydraulic excavator )/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.Ordinary rock | BI01010001010000000000000515BI0100001252 | 41.15 | cum |
141 | 10.02 | 4.1.4 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 )1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size) | BI01010001010000000000000515BI0100001253 | 2.13 | cum |
142 | 10.03 | 5.1.2 : Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size | BI01010001010000000000000515BI0100001254 | 20.64 | cum |
143 | 10.04 | 5.9.6 : Centering and shuttering including strutting, etc. and removal of form for:Columns, Pillars, Piers, Abutments, Posts and Struts | BI01010001010000000000000515BI0100001255 | 213.92 | sqm |
144 | 10.05 | 5.9.4 : Centering and shuttering including strutting, etc. and removal of form for:Shelves (Cast in situ) | BI01010001010000000000000515BI0100001256 | 23.006 | sqm |
145 | 10.06 | 5.22.3 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelCold twisted bars | BI01010001010000000000000515BI0100001257 | 1994.9 | kilogram |
146 | 10.07 | od40104/2020_2021/P2 : Providing and installing machinery and equipment for STP with twin lobe diffusers 25m3 per hour(2no), tranfer/filter feed pump 3m3 per hour (2no), pressure sand filter3m3 per hour(1no) ,activated carbon filter3m3 per hour(1no), Chlorine Dozing pump 5l/hour (1no), Bio Duck virgin PP(4 cubic meter), Aerobic media (3cubic meter )including Plumbing and electrical charges etc complete as per site requirements & directed by the Engineer in charge. | BI01010001010000000000000515BI0100001258 | 1 | each |
147 | 11 | Repair works to existing building (watchman quarters)near suspension bridge | BI01010001010000000000000515BI0100001259 | ||
148 | 11.01 | 15.3 : Demolishing R.C.C. work manually / by mechanical means including stacking of steel bars and disposal of unserviceable material with in 50 metres lead as per direction of Engineer -in-Charge. | BI01010001010000000000000515BI0100001260 | 2.88 | cum |
149 | 11.02 | 15.7.4 : Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.In cement mortar | BI01010001010000000000000515BI0100001261 | 13.7 | cum |
150 | 11.03 | 60.7.3 : DISMANTLING DR - Dismanling , clearing away and carefully stacking materials useful for reuse for any thickness of walls in DR masonry including disposal of debris within a distance of 150m. | BI01010001010000000000000515BI0100001262 | 6.707 | cum |
151 | 11.04 | 2.7.1 : Earth work in excavation by mechanical means (Hydraulic excavator )/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.Ordinary rock | BI01010001010000000000000515BI0100001263 | 6.095 | cum |
152 | 11.05 | 4.1.4 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 )1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size) | BI01010001010000000000000515BI0100001264 | 1.742 | cum |
153 | 11.06 | 7.1.1 : Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up to plinth level with:Cement mortar 1:6 (1 cement : 6 coarse sand) | BI01010001010000000000000515BI0100001265 | 11.815 | cum |
154 | 11.07 | 50.2.25.1 : Filling with contractor's own earth ( excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m as per direction of site Engineer-in-charge | BI01010001010000000000000515BI0100001266 | 1.823 | cum |
155 | 11.08 | 2.25 : Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m. | BI01010001010000000000000515BI0100001267 | 4.193 | cum |
156 | 11.09 | 4.1.6 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:3:6 ( 1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) | BI01010001010000000000000515BI0100001268 | 17.453 | cum |
157 | 11.1 | 50.6.1.1 : Solid block masonry using pre cast solid blocks ( factory made) of size 40x20x20cm or nearest available size confirming to IS 2185 part 1 of 1979 for foundation and plinth with thickness 20 cm and above in: CM 1:6 ( 1 cement : 6 coarse sand) etc complete | BI01010001010000000000000515BI0100001269 | 13.709 | cum |
158 | 11.11 | 5.9.5 : Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers | BI01010001010000000000000515BI0100001270 | 18.367 | sqm |
159 | 11.12 | 5.9.3 : Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform | BI01010001010000000000000515BI0100001271 | 41.121 | sqm |
160 | 11.13 | 5.3 : Reinforced cement concrete work in beams, suspended floors, roofs, having slope up to 15<sup>0</sup> landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement, with1:1.5:3 (1 cement : 1.5 coarse sand (Zone III) : 3 graded stone aggregate 20 mm nominal size). | BI01010001010000000000000515BI0100001272 | 6.007 | cum |
161 | 11.14 | 5.22.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more | BI01010001010000000000000515BI0100001273 | 570.665 | kilogram |
162 | 11.15 | 5.30 : Add for plaster drip course / groove in plastered surface or moulding to R.C.C. projections. | BI01010001010000000000000515BI0100001274 | 21.98 | metre |
163 | 11.16 | 21.1.1.2 : Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron) | BI01010001010000000000000515BI0100001275 | 9.617 | kg |
164 | 11.17 | 21.1.2.3 : For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micorn) | BI01010001010000000000000515BI0100001276 | 8.15 | kg |
165 | 11.18 | 21.3.1 : Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness | BI01010001010000000000000515BI0100001277 | 3.24 | sqm |
166 | 11.19 | 9.48.1 : Providing and fixing M.S. Grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to steel windows by welding | BI01010001010000000000000515BI0100001278 | 64.8 | kg |
167 | 11.2 | 9.1.1 : Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately).Second class teak wood | BI01010001010000000000000515BI0100001279 | 0.09 | cum |
168 | 11.21 | 9.5.1.2 : Providing and fixing panelled or panelled and glazed shutters for shutters for doors, windows and clerestory windows, including ISI marked M.S. pressed butt hinges bright finished of required size with necessery screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer - in-charge.30 mm thick shutters | BI01010001010000000000000515BI0100001280 | 3.034 | sqm |
169 | 11.22 | 9.141 : Providing and fixing PVC Door Frame of size 50x47 mm with a wall thickness of 5 mm (±0.2mm), made out of single piece extruded PVC profile, with mitred cut joints and with 2 nos of PVC bracket of size 190 mm x 100 mm long arms of cross section size 35 x 15 mm & self driven self taping screws, the vertical door profiles to be reinforced with 40x20 mm M.S. rectangular tube of 0.8 mm, including providing EPDM rubber gasket weather seal throughout the frame, including jointing 5 mm PVC frame strip with PVC solvent cement on the back of the profile. The door frame to be fixed to the wall using 8x100 mm long anchor fasteners complete, all as per manufacturer's specification and direction of Engineer-in--charge. | BI01010001010000000000000515BI0100001281 | 5.6 | metre |
170 | 11.23 | 9.142.2 : 35 mm thick factory made Solid panel PVC Door shutter, made out of single piece extruded solid PVC ( ±0.2 mm) thick, having styles & rails (except lock rail ) of size 95 mmx 35 mm x 5 mm, out of which 75 mm shall be flat and 20 mm shall be tapered (on both side), having one side thickness of 15 mm integrally extruded on the hinges side of the profile for better screw holding power, including reinforcing with MS tube of size 40 mm x 20 mm x 1 mm, joints of styles & rails to be mitered cut & joint with the help of PVC solvent cement, self driven self tapping screws & M.S. rectangular pipes bracket of size 190 mm x 100 mm of cross section size 35 mm x 17 mm s 1 mm at each corner. Single piece extruded 5 mm thick solid PVC Lock rail of size 115 mm x 35 mm x 35 mm, out of which 95 mm to be flat and 20 mm to be tapered at both ends, having 15 mm solid core in middle of rail section integrally extruded, fixing the styles & rails with the help of solvent and self driven self tapping screws of 125 mm x 11 mm, including providing 5 mm Single piece solid PVC extruded sheet inserted in the door as panel, all complete as per manufacturer's specification and direction of Engineer-in-charge.Decorative finish (wood grained finish) | BI01010001010000000000000515BI0100001282 | 1.47 | sqm |
171 | 11.24 | 11.41.2 : Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600 x 600 mm. | BI01010001010000000000000515BI0100001283 | 20.952 | sqm |
172 | 11.25 | 11.36 : Providing and fixing I st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer -in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. | BI01010001010000000000000515BI0100001284 | 12.18 | sqm |
173 | 11.26 | 13.33.1 : Pointing on stone work with cement mortar 1:3 ( 1 cement : 3 fine sand):Flush/ Ruled pointing | BI01010001010000000000000515BI0100001285 | 6.75 | sqm |
174 | 11.27 | 50.13.1 : 9 mm cement plastering of mix : 1:3 (1 cement : 3 fine sand ) including all cost of materials, labour charges etc complete | BI01010001010000000000000515BI0100001286 | 30.999 | sqm |
175 | 11.28 | 13.4.1 : 12 mm cement plaster of mix:1:4 ( 1 cement : 4 coarse sand) | BI01010001010000000000000515BI0100001287 | 139.866 | sqm |
176 | 11.29 | 13.43.1 : Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer | BI01010001010000000000000515BI0100001288 | 182.445 | sqm |
177 | 11.3 | 13.48.2 : Finishing with Deluxe Multi surface paint system for interiors and exteriors using primer as per manufacturers specifications:Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.75 ltr/10 sqm of approved brand and manufacture | BI01010001010000000000000515BI0100001289 | 182.445 | sqm |
178 | 11.31 | 13.50.1 : Applying priming coat:With ready mixed pink or Grey primer of approved and manufacture on wood work (hard and soft wood) | BI01010001010000000000000515BI0100001290 | 8.505 | sqm |
179 | 11.32 | 13.57.1 : Painting with oil type wood preservative of approved brand and manufacture :New work (two or more coats) | BI01010001010000000000000515BI0100001291 | 8.505 | sqm |
180 | 11.33 | 17.3.1 : Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid | BI01010001010000000000000515BI0100001292 | 1 | each |
181 | 11.34 | 17.7.7 : Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Flat back wash basin size 450x300 mm with single 15 mm C.P. brass pillar tap | BI01010001010000000000000515BI0100001293 | 1 | each |
182 | 11.35 | 17.72 : Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms | BI01010001010000000000000515BI0100001294 | 1 | each |
183 | 12 | Open well and filter system | BI01010001010000000000000515BI0100001295 | ||
184 | 12.01 | 2.7.1 : Earth work in excavation by mechanical means (Hydraulic excavator )/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.Ordinary rock | BI01010001010000000000000515BI0100001296 | 46.399 | cum |
185 | 12.02 | 2.26.2 : Extra for every additional lift 1.5 m or part there of in excavation / banking excavated or stacked materials.Ordinary or hard rock | BI01010001010000000000000515BI0100001297 | 31.762 | cum |
186 | 12.03 | 60.7.1 : DRY RUBBLE MASONRY _ Dry rubble without concrete levelling course masonry with good quality blasted rubble including packing to compactness to lines and levels cost and conveyance of all materials labour charges etc. complete as per direction of Departmental officers at site | BI01010001010000000000000515BI0100001298 | 6.253 | cum |
187 | 12.04 | 4.3.2 : Centering and shuttering including strutting, propping etc. and removal of form work for:Retaining walls, return walls, (any thickness) including attached pilasters, buttresses, plinth and string courses fillets, kerbs and steps etc. | BI01010001010000000000000515BI0100001299 | 3.706 | sqm |
188 | 12.05 | 4.1.3 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) | BI01010001010000000000000515BI0100001300 | 0.834 | cum |
189 | 12.06 | 4.1.6 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:3:6 ( 1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) | BI01010001010000000000000515BI0100001301 | 1.17 | cum |
190 | 12.07 | 50.6.1.1 : Solid block masonry using pre cast solid blocks ( factory made) of size 40x20x20cm or nearest available size confirming to IS 2185 part 1 of 1979 for foundation and plinth with thickness 20 cm and above in: CM 1:6 ( 1 cement : 6 coarse sand) etc complete | BI01010001010000000000000515BI0100001302 | 2.371 | cum |
191 | 12.08 | 13.1.1 : 12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) | BI01010001010000000000000515BI0100001303 | 30.204 | sqm |
192 | 12.09 | 10.2 : Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | BI01010001010000000000000515BI0100001304 | 132.839 | kg |
193 | 12.1 | 11.41.2 : Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600 x 600 mm. | BI01010001010000000000000515BI0100001305 | 10.2 | sqm |
194 | 12.11 | 11.46.2 : Providing and laying Vitrified tiles indifferent sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete.Size of Tile 600x600 mm | BI01010001010000000000000515BI0100001306 | 1.665 | sqm |
195 | 12.12 | 50.10.1 : Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | BI01010001010000000000000515BI0100001307 | 724.389 | kg |
196 | 12.13 | od40208/2020_2021/P2 : Roofing with shingles on cement base board 12 mm thick including mystique, water proofing material bitumen membrane, ridges,starter etc of approced brand and manufacture (Scaffs or equivalent) including providing Hip and range, valley gutter etc.,including fixing cement board and shingles as per approved practice etc. as per site requirements and directed by the Engineer in charge | BI01010001010000000000000515BI0100001308 | 11.22 | sqm |
197 | 12.14 | 13.43.1 : Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer | BI01010001010000000000000515BI0100001309 | 19.5 | sqm |
198 | 12.15 | 13.48.3 : Finishing with Deluxe Multi surface paint system for interiors and exteriors using primer as per manufacturers specifications:Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture | BI01010001010000000000000515BI0100001310 | 19.5 | sqm |
199 | 12.16 | od40106/2020_2021/P2 : Providing and installing Blue star water cooler Machine Model No: SDLX4080B- 2 Tap(1 tap cold & 1 plain) or equivalent as per site requirements and directed by the Engineer in charge | BI01010001010000000000000515BI0100001311 | 3 | each |
200 | 12.17 | od40107/2020_2021/P2 : Providing and fixing water purification system with advanced RO+UV+MTDS purification technology including installation etc complete as per site requirements and directed by the Engineer in charge | BI01010001010000000000000515BI0100001312 | 3 | each |
201 | 13 | Supply of FRP waste collection bins | BI01010001010000000000000515BI0100001313 | ||
202 | 13.01 | od40295/2020_2021/P2 : Supplying and fixing Aquqtech Dust bin with lid - ATWB - 40L including all cost of materials, labour charges, conveyance and fitting charges etc.complete as per site requirements and the directions of the Engineer in charge. | BI01010001010000000000000515BI0100001314 | 4 | each |
203 | 13.02 | od40296/2020_2021/P2 : Suppling and fixing Aquatech wheeled with lid Dust bin - ATWB 90L including all cost of materials , labour charges, conveyance, and fitting charges etc.complete as per site requirements and the directions of the Engineer in charge. | BI01010001010000000000000515BI0100001315 | 40 | each |
204 | 14 | Plumbing and other works | BI01010001010000000000000515BI0100001316 | ||
205 | 14.01 | 2.7.1 : Earth work in excavation by mechanical means (Hydraulic excavator )/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.Ordinary rock | BI01010001010000000000000515BI0100001317 | 5.76 | cum |
206 | 14.02 | 4.1.8 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size) | BI01010001010000000000000515BI0100001318 | 0.576 | cum |
207 | 14.03 | 5.9.6 : Centering and shuttering including strutting, etc. and removal of form for:Columns, Pillars, Piers, Abutments, Posts and Struts | BI01010001010000000000000515BI0100001319 | 14.6 | sqm |
208 | 14.04 | 5.9.3 : Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform | BI01010001010000000000000515BI0100001320 | 24.96 | sqm |
209 | 14.05 | 5.9.5 : Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers | BI01010001010000000000000515BI0100001321 | 9.12 | sqm |
210 | 14.06 | 5.1.2 : Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size | BI01010001010000000000000515BI0100001322 | 6.095 | cum |
211 | 14.07 | 5.22.3 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelCold twisted bars | BI01010001010000000000000515BI0100001323 | 515.755 | kilogram |
212 | 14.08 | 13.43.1 : Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer | BI01010001010000000000000515BI0100001324 | 52.353 | sqm |
213 | 14.09 | 13.48.3 : Finishing with Deluxe Multi surface paint system for interiors and exteriors using primer as per manufacturers specifications:Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture | BI01010001010000000000000515BI0100001325 | 52.353 | sqm |
214 | 14.1 | 50.18.8.6.1 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 50 mm pipe 10 kgf/cm2 | BI01010001010000000000000515BI0100001326 | 80 | metre |
215 | 14.11 | 18.7.3 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge. Internal work - Exposed on wall25 mm nominal outer dia pipes | BI01010001010000000000000515BI0100001327 | 250 | metre |
216 | 14.12 | 18.9.2 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching , refilling & testing of joints complete as per direction of Engineer- in-Charge. External work20 mm nominal outer dia pipes | BI01010001010000000000000515BI0100001328 | 25 | metre |
217 | 14.13 | 18.18.3 : Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete:25 mm nominal bore | BI01010001010000000000000515BI0100001329 | 2 | each |
218 | 14.14 | od40402/2020_2021/P2 : Providing and fixing PVC moulded fittings/ Accessories for rigid PVC pipes including jointing with PVC solvent cement - 20 dia 45 degree Elbow as per site requirements and the directions of the Engineer in charge. | BI01010001010000000000000515BI0100001330 | 35 | each |
219 | 14.15 | od40403/2020_2021/P2 : Providing and fixing PVC moulded fittings/ Accessories for rigid PVC pipes including jointing with PVC solvent cement - 50 dia 45 degree Elbow as per site requirements and the directions of the Engineer in charge. | BI01010001010000000000000515BI0100001331 | 10 | each |
220 | 14.16 | od40404/2020_2021/P2 : Providing and fixing PVC moulded fittings/ Accessories for rigid PVC pipes including jointing with PVC solvent cement - 50 mm dia Bend as per site requirements and the directions of the Engineer in charge. | BI01010001010000000000000515BI0100001332 | 12 | each |
221 | 14.17 | od40532/2020_2021/P2 : Providing and fixing PVC moulded fittings/Accessories for rigid PVC pipes including jointing with PVC solvent cement - 25 to 20 mm dia Reducer as site requirements and as per the directions of the Engineer in charge. | BI01010001010000000000000515BI0100001333 | 10 | each |
222 | 14.18 | od40534/2020_2021/P2 : Providing and fixing PVC moulded fittings /Accessories for rigid PVC pipes including jointing with PVC solvent cement - 20 mm dia coupler as site requirements and as per the directions of the Engineer in charge. | BI01010001010000000000000515BI0100001334 | 10 | each |
223 | 14.19 | od40405/2020_2021/P2 : Providing and fixing stainless steel submersible pumpset 2 HP, with all necessary accessories including all cost of materials ,labour charges conveyance and fitting charges etc. complete as per site requirements and the directions of the Engineer in charge. | BI01010001010000000000000515BI0100001335 | 1 | each |
224 | 14.2 | od40543/2020_2021/P2 : Supplying and providing Syntex water tank including cost of materials, accessories, conveyance and labour charges etc.complete as per site requirements and the directions of the Engineer in charge. | BI01010001010000000000000515BI0100001336 | 3000 | per litre |
225 | 14.21 | od40545/2020_2021/P2 : Engaging man mazdoor for clearing the site as per site requirements and the directions of the Engineer in charge. | BI01010001010000000000000515BI0100001337 | 10 | each |
226 | 15 | Suppling and fixing of CCTV surveylance system | BI01010001010000000000000515BI0100001338 | ||
227 | 15.01 | od40366/2020_2021/P2 : Supplying and fixing 16 CH NVR 7P16 NI -K2 MP HIKVISION or equivalent made, 11 Nos IR Bullet/Dome IP Camera 2.0 MP , 3.6 MM, 5 nos IR Bullet/Dome IP Camera 2.0 MP 6 MM, 02 nos Hard disc 4TB SV cable connection ,3 numbers P O switch 8 port Tenda 8+2, RJ 45 connector,camera housing with stand aluminium, 4x4 camera box, wall mount rack 6u, rack fitting NVR configuration and installation, cat 6 cable D- Link including black pipe and including G I pipe for mounting camera wherever necessary and all cost of materials labour charges, conveyance and fitting charges etc. complete as per site requirements and the directions of the Engineer in charge. | BI01010001010000000000000515BI0100001339 | 1 | each |
228 | 16 | Signages | BI01010001010000000000000515BI0100001340 | ||
229 | 16.01 | od40371/2020_2021/P2 : Supplying and fixing 90 x 120 cm ACP sheet with Vinyl HD quality including all cost of materials labour charges , conveyance and fitting charges etc. completeas per site requirements and the directions of the Engineer in charge. | BI01010001010000000000000515BI0100001341 | 5 | each |
230 | 16.02 | od40374/2020_2021/P2 : Supplying and fixing 90 x 90 cm, 5mm Foam board with pasting vinyl printing including all cost of materials labour charges , conveyance and fitting charges etc. complete as per site requirements and the directions of the Engineer in charge. | BI01010001010000000000000515BI0100001342 | 5 | each |
231 | 16.03 | od40375/2020_2021/P2 : Supplying and fixing 120 x 60 cm, 5mm Foam board with pasting vinyl printing including all cost of materials labour charges , conveyance and fitting charges etc. complete as per site requirements and the directions of the Engineer in charge. | BI01010001010000000000000515BI0100001343 | 10 | each |
232 | 16.04 | od40376/2020_2021/P2 : Supplying and fixing 90 x 120 cm, 5mm Foam board with pasting vinyl printing including all cost of materials labour charges , conveyance and fitting charges etc. complete as per site requirements and the directions of the Engineer in charge. | BI01010001010000000000000515BI0100001344 | 10 | each |
233 | 16.05 | od40377/2020_2021/P2 : Supplying and fixing 90 x 90 cm Frame with cloth printing including all cost of materials labour charges , conveyance and fitting charges etc. complete as per the directions of the Engineer in charge | BI01010001010000000000000515BI0100001345 | 10 | each |
234 | 16.06 | od40378/2020_2021/P2 : Supplying and fixing 120 x 60 cm Frame with cloth printing including all cost of materials labour charges , conveyance and fitting charges etc. completeas per site requirements and the directions of the Engineer in charge. | BI01010001010000000000000515BI0100001346 | 10 | each |
235 | 16.07 | od40379/2020_2021/P2 : Supplying and fixing 180 x 120 cm Frame with cloth printing including all cost of materials labour charges , conveyance and fitting charges etc. completeas per site requirements and the directions of the Engineer in charge.e | BI01010001010000000000000515BI0100001347 | 10 | each |
236 | 16.08 | od40380/2020_2021/P2 : Supplying and fixing 90 x 120 cm Frame with cloth printing including all cost of materials labour charges , conveyance and fitting charges etc. complete as per site requirements and the directions of the Engineer in charge.e | BI01010001010000000000000515BI0100001348 | 15 | each |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail