Design, Construction, Successful Testing & Commissioning Of Pre-Settling Tank, 0.50 Mgd Capacity Rapid Sand Filtration Plant With Rcc Oht Of 1.00 Lac Gallons Capacity, Clarifloculator, Flash Mixer, 0.50 Lac Gallons Capacity Clear Water Sump, 4 No. Sluice , Ratnipora-Jammu And Kashmir

TDR : 26465029

Tender Notice
BOQ

Expired

Ratnipora , Jammu And Kashmir

Tender Brief : Design, Construction, Successful Testing & Commissioning Of Pre-Settling Tank, 0.50 Mgd Capacity Rapid Sand Filtration Plant With Rcc Oht Of 1.00 Lac Gallons Capacity, Clarifloculator, Flash Mixer, 0.50 Lac Gallons Capacity Clear Water Sump, 4 No. Sluice

Document Fees
₹ 8500 /-

EMD
₹ 1016000.0 /-

Tender Value
₹ 5.08 Crore /-

Submission Date
21-01-2021

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !

Name of Work: Design, Construction, Successful testing & Commissioning of Pre-settling tank, 0.50 MGD Capacity Rapid Sand Filtration Plant with RCC OHT of 1.00 Lac Gallons Capacity, Clarifloculator, Flash Mixer, 0.50 lac gallons capacity Clear Water Sump, 4 No. Sluice Chambers including construction of Chain link fencing around structures, Pump House, Sludge Disposal Drain, Nallah training works, Transformer bed, Levelling of premises, Face Lifting, Providing and fixing of Pipe network in Rising Mains, Supply Mains, Sub Mains, Distribution system including electrical/mechanical works as required with Trial run for 06 months after completion of the Construction work and maintenance for a period of three years including DLP of 12 months on TURNKEY BASIS for WSS Aug. Ratnipora under NABARD including Conducting complete necessary soil investigation/cube testing/pile testing (if required) at proposed site, as per the Parameters/ Specification mentioned in the tender document. Architectural aesthetics shall also be kept in consideration to make the structures appealing. under NABARD
1	1	Design, Construction, Successful testing and Commissioning of 0.50 MGD RSFP (filter house, clear flocculator, flush mixer and Sludge Disposal Unit) with all allied components (civil and mechanical) required for completion of the RSFP.	1	Job
2	2	Design, Construction, Successful testing and Commissioning of 1.00 Lac Gallons RCC Over Head Tank with all allied components	1	Job
3	3	Construction of 0.50 lac gallons RCC Sump, Construction of Pump House Cum Operator Quarter, Construction of Pump House Stage -Ist, Construction of Chowkidar Quarter/chemical shed, Construction of Sluice Chambers, Construction of Transformer Bed and DG Shed, Construction of Chain Link Fencing, Construction of Intake Works and Development of Premises including connecting of existing 0.25 lac gallons OHT (as per below items) :-
4	4	Earth work in excavation by manual means over areas exceeding 30 cms & upto 5 m in depth 1.5m in width as well as 10 sqm. On plan, disposal of excavated earth upto 1 m, disposed earth to be levelled & neatly dressed( all kinds of soils)	2993	Cum
5	5	Providing & Laying of stone soling (dully hand packed)including watering dressing and ramming with all carriages loading un-loading and stacking etc complete	283.7	Cum
6	6	Providing & laying in position cement concrete of specified grade excld. The cost of centring and shuttering all work upto plinth level(1:4:8 coarse sand 20mm nominal size crushed stone agg.)	78.2	Cum
7	7	P/L in position specified grade of reinforced cement cencrete (1:1.5:3) mix excld. the cost of centring, shuttering, finishing and reinforecement With stone agg. 20mm nominal size
8	7.1	Walls	36.95	Cum
9	7.2	Slabs/floors	157.53	Cum
10	7.3	Dome	15.77	Cum
11	8	P/L in position specified grade of reinforced cement cencrete (1:1:2) mix , upto floor V level excld. the cost of centring, shuttering, finishing and reinforecement With stone agg. 20mm nominal size
12	8.1	Walls	35.37	Cum
13	8.2	Slabs/floors	71.49	Cum
14	9	P/L in position specified grade of reinforced cement cencrete (1:3:6) excld. The cost of centring, shuttering, finishing and reinforecement-All work upto plinth level stone agg. 20mm nominal size	248.69	Cum
15	10	Providing and laying of 40-mm thick 1:2:4 mix coping with 20-mm nominal size aggregates	4.05	Cum
16	11	Centring and shuttering incld. Strutting, proping etc & removal of form work for Founadtions, footings, bases of columns for mass concrete
17	11.1	Foundation	906.38	Sqm
18	11.2	Walls	342.67	Sqm
19	11.3	floor slab	133.31	Sqm
20	11.4	edges	172.06	Mtr
21	11.5	Beams	68.03	Sqm
22	11.6	Columns	43.14	Sqm
23	11.7	Dome	105.18	Sqm
24	11.8	Extra for Domes	105.18	Sqm
25	12	Reinforcement for RCC work incld straightning, cutting, bending, placing in position & binding all complete (Thermo-mechanically treated bars)	19770.1	Kg
26	13	P/L 12-mm thick cement plaster in 1:3	2273.83	Sqm
27	14	Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer's specification.	890	kgs
28	15	Backfilling available excavated earth	2167.11	Cum
29	16	Structural Steel work in single section fixed with connecting plate including cutting, hoisting, fixing in position and applying a priming coat of approved stee steel primer complete	13841	Kgs
30	17	Brickwork in common burnt clay FPS brocks of class designed 75 in foundation in 1:6 mix	55.32	Cum
31	18	Extra for brick work in superstructure above plinth level upto floor V level. (By manual means)	55.32	Cum
32	19	Providing wood work in frames of doors, windows, clerestory windows and other frames wrought framed and fixed in position with hold fast lugs or with dash fastners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately of 2nd class kail wood	1.17	Cum
33	20	Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows including lSI marked M.S. pressed Butt hinges bright finished of required size with necessary screws excluding panelling which will be paid for separately, all complete as per direction of engineer- in charge.2nd class Kail wood 35 mm	34.24	Sqm
34	21	Providing and fixing 35 mm thick wire gauze shutters, using galvanised M.S. wire gauze of average width for aperture 1.4 mm in both directoin with wire of dia. 0.63 mm for doors, windows and clerestory windows with hinges and necessary screws: ISI marked M.S. pressed bright finished butt hinges with necessary screws of required size. 2nd class Kail-wood	19.12	Sqm
35	22	Suppying and fixing rolling shutters of approved make, made of required size M.S. laths interlocked together through their entire length and jointed together at the end by end locks mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete including the cost of providing and fixing necessary 27.5 em long wire springs manufacture from high tensile steel wire of adequate strength confirming to IS 4454 part1 and M.S. top cover of required thickness for rolling shutters. 80x1.20 mm M.S. laths with 1.20 mm thick sqm top cover	11.17	Sqm
36	23	Providing and fixing ball bearing for rolling shutters	4	Nos.
37	24	Steel work welded in built up sections/framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required- ornamental Grill	417.8	kgs
38	25	Providing and fixing G. I. chain link fabric fencing of required width in mesh size 50x50mm including strengthening with 2mm dia wire or nuts, bolts and washers as required complete as per direction of Engineer-in-charge. \n Made of G. I. wire of dia 4mm	288.23	SM
39	26	Providing and fixing of Tail pieces to PST inlcuding cost of flanges, welding etc as required at site	4	Nos
40	27	Dry stone pitching 22.5 em thick including supply of stones and preparing surface complete	37.5	Cum
41	28	Grouting of stone pitching using M-1 0 nominal mix concrete (max. size of aggregates; 20mm nominal) @ 3.65 cum per 100 sq m on horizontal/side slopes; complete including curing	150	SM
42	29	Providing corrugated G.S. Sheet roofing including vertical/curved surface fixed with polymer coated Jor L hooks, bolts and nuts 8 mm diameter with bitumen and G.I limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal /vertical or curved surface) excluding the cost of purlins, raffers and trusses and including cutting to size and shape where ever required. 0.63 mm thick with zinc coating not less than 275 gm/m2\n	282.55	Sqm
43	30	Providing ridges or hips of width 60 cm overall width plain G.S. sheets fixed with polymer coated J. or L. hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete.\n0.63 mm thick with zinc coating not less than 275 gm/m2 \n	65.99	RM
44	31	Providing and fixing of eaves boarding	37.92	RM
45	32	Providing and fixing of glass shutters	1	Job
46	33	Providing/fixing of hinges of sizes, Tower Bolts, handles, haldarwazs, latches incl. screws of sorts all complete job.	1	Job
47	34	Providing and fixing of Regulatory Valves (zoloto/Kirlosker) made complete with bolts, nuts, washers,tail piece etc insertion complete with all carriage
48	34.1	150-mm dia.	8	No
49	34.2	100-mm dia.	8	No
50	34.3	80-mm dia.	4	No
51	34.4	65-mm dia.	4	No
52	35	Providing and fixing of 150-mm dia GI pipe Tail pieces including cost of fixing flanges	19	Mtr
53	36	Providing and fixing of 40-mm dia. Aeration bends	15	Nos
54	37	Providing and Fixing of 80-mm dia MS pipe incl. all supporting complete	36.5	Mtr
55	38	Applying priming coat of approved brand and manufacture on wood work	38.64	Sqm
56	39	Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on Wood work./Plaster work	532.56	Sqm
57	40	Applying priming coat of approved brand and manufacture on steel galvanized iron/steel works	329.4	Sqm
58	41	Painting with synthetic enamel paint of approvedbrand and manufacture of required color to give an even shade two or more coat on steel works	329.4	Sqm
59	42	Providing and fixing 1st quality ceramic glazed tiles conforming to IS :·13753 of minimum thickness 5 mm of approved make like NITCO, ORIENT, SOMANY KAJARIA, or equivalent make in all colour, shades except begundy, bottle green, black of any size as approved by Eningeerin-Charge in skirting, risers of steps and dados over 12 mm thick bed of Cement Mortar 1:3 ( 1 cement: 3 coarse sand) and jointing wtih grey cement slurry@ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete	50.6	Sqm
60	43	Applying white cement based putty 2 mm thick	483.15	Sqm
61	44	Providing and fixing of sanitary items i.e Indian type WC, Beb Cock, !5-mm dia G.I Pipe with fittings, PVC waste Pipes, Sink to kitchen, 500 ltr PVC Tank etc	2	Job
62	45	Construction of ring type soakage/Septic pit including cost of excavation	26	No
63	46	Providing and fixing of electrical arrangements i.e channel, wire,, Panell board, Switchs, Bulbs etc of approved brand and manufacturesr Complete Job	2	Job
64	47	Pumping out water caused by springs, tidal or river seepage, broken water mains or drains and the like.	950	Liter
65	48	Clearing site Premises including uprooting of rank vegetation, grass, rushwood, trees and saplings of girth upto 30cm measured at height of 1m above ground level and removal of rubbish upto a distance of 50m outside the periphery of the area cleared	1350	Sqm
66	49	Supplying and stacking of good earth at site, excluding carriage.	1096.25	Cum
67	50	Spreading good earth in required thickness as per directions of officer incharge	1096.25	Cum
68	51	P/F flanged joints to G.I pipes including cost of pipes, flanges, nuts, bolts, washers, laying in position complete and all carriage complete
69	51.1	100-mm dia GI pipe	1500	mtr
70	51.2	80-mm dia. GI pipe	1300	mtr
71	51.3	65-mm dia. GI pipe	1000	mtr
72	52	Providing and laying S&S centrifugally cast (spun) iron pipes (Class LA) conforming to IS - 153 with all carriage complete \n150-mm F D.I Pipe\n	1000	Mtr
73	53	Providing and fixing G.I. pipes complete with G.I. fittings excluding\ntrenching and refilling etc. (external work) with all carriage complete
74	53.1	50-mm F G.I Pipe	1500	Mtr
75	53.2	40-mm F G.I Pipe	1000	Mtr
76	53.3	25-mm F G.I Pipe	1500	Mtr
77	53.4	20-mm F G.I Pipe	2500	Mtr
78	54	Making connections of G.I distribution with G.I main including providing Tee, etc complete job
79	54.1	50 mm to 80-mm nominal bore	20	Mtr
80	54.2	20 mm to 40-mm nominal bore	50	Mtr
81	55	Cutting road and making good the same including supply of extra quantities of material i.e. aggregate, moorum screening, red bajri and labour required. for laying of pipe line
82	55.1	Butmuminous portion	23.4	Cum
83	55.2	WBM	58.5	Cum
84	56	150-mm dia. Pipe for making passage for 100/80/65-mm pipe	130	Mtr
85	57	Carriage of materails By Mech.Transport, from source to nearest site of work
86	57.1	Stone agg/Sand. for an avg lead of 15 km	1059.22	Cum
87	57.2	Cement/Steel for an avg lead of 15 km	274.54	MT
88	57.3	Stone soling for an avg. lead of 15 km	199.49	Cum
89	57.4	Bricks for an avg. lead of 25 km	26278	Nos/1000
90	57.5	Earth for an avg. lead of 05 km	1096.25	Cum
91	57.6	Steel	2332.55	Cum
92	57.7	Sand + Bajri	2333.55	Cum
93	57.8	Stone solling	2334.55	Cum
94	57.9	Connecting of existing 0.25 lac gallon OHT at Frestbagh including providing of Rising Main and other allied works	1	Job
95	58	Providing Fitting & Installation of 04 No of MS Column pipe of 300mm Nominal diameter and 6.3mm of thickness with the cone shaped element with cone angle of 300 should be fabricated out of MS plate of 6mm thick and welded to one side of MS Pipe for the easy insertion of the pile/pipe through the river bed by impact hammering. The pile shall have suitable load carrying capacity determined by the way of static method/dynamic method. The concreting mix in pipe shall be M30 design mix & the reinforced case in 10mm should be inserted properly. The volume of mix shall be equal to volume of liquid displaced. The minimum insertion of pipe/pile inside the river bed should be 14 feet & 20 feet above the river bed with pile spacing equal to12feet’s& 09feet’s respectively.The two pipes of the length 20 feet’s each should be joined end to end through butt welding in order to get the total required column height of 40 feet’s & finally MS strip of 8mm thick and 12-inch-wide is wrapped around the pipe and welded circumferentially from both the sides. Column section inMS pipe of ND 300mm ( t=6.3mm) with allied works (for full technical specifications of mechanical components refer Annexure \"A\" in the tender document)	2290.39	Kg
96	59	Providing/Fabrication / Fitting of MS Platform in various sections P/F of Horizontal &transverse members over the erected column section in ISMB 200 (tw=5.7mm, tf=10mm) with allied works, P/F of Horizontal & transverse Supporting Member in ISMC 125mm:(with allied works) (Bottom & middle), P/F of Lateral supporting Members in pipe section in ND 100mm & 65mm to minimize lateral displacement, P/F of Lower Platform of size 6ft x 5ft in ISMC 125mm( Medium ) with allied works (for full technical specifications of mechanical components refer Annexure \"A\" in the tender document)	1609	Kg
97	60	Providing/Fabrication /Fitting of Approach paths in various sections : P/F of vertical members to act as columns to support approach path (L=30’) in 150mm MS Pipe (t=5.4 mm) with allied works, P/F of Longitudinal and transverse beams in ISMB 150mm with allied works, P/F of Longitudinal beams in ISMC 125mm with allied works, P/F of Transverse beams in ISMC 100 mm with allied works, P/F of M.S Chequred plate 5 mm thick for Platform & Approach Path, (for full technical specifications of mechanical components refer Annexure \"A\" in the tender document)	2304	Kg
98	61	Civil work required for Erection of vertical members (for full technical specifications of mechanical components refer Annexure \"A\" in the tender document)	6	Job
99	62	Providing /Fabrication/Fitting Of Over Head Gantry For Raw Water Stage (for full technical specifications of mechanical components refer Annexure \"A\" in the tender document)	1	Job
100	63	Providing/Fabrication / fitting of Monorail/Hoist manually operated provided with necessary gear train and hardened steel wheels along with chain pulley block (01 No to be installed at Raw water Platform, 01 No to be installed at Raw Water Control room , 01 No to be installed at Filter Water Sump, 01 No to be installed at filter water Control room (for full technical specifications of mechanical components refer Annexure \"A\" in the tender document)	2	Job
101	64	Providing/Fabrication /Fitting of Side railing & Canopy over the MS Platform in various Sections (for full technical specifications of mechanical components refer Annexure \"A\" in the tender document)	2218	Kg
102	65	Providing /Fabrication/Fitting Of 3 member Gantry at FW Stage (Sump) (for full technical specifications of mechanical components refer Annexure \"A\" in the tender document)	823	Kg
103	66	Providing and fixing of CGI Coloured sheeting of 26 Gauge in green shade with suitable overlap between sheets for canopy. The job is inclusive of the cost of hooks, nuts and cutting of holes in the pipe section if required for the completion of the job in all respects 5.5m x 4m + 2m x10m= 42 Sq.m	42	Sqm
104	67	Painting:-The complete truss structure comprising of girder, column supports, trusses , purlins, Chequred plate and other fixtures shall be painted with one coat of steel primer followed by two coats of super enamel paint of shade of reputed make (for full technical specifications of mechanical components refer Annexure \"A\" in the tender document)	1	Job
105	68	Mechanical Works to Be Executed at Raw & Filter Water Stage (Supply, Installation, Testing & Commissioning of Pumping Unit at RawWater Stage. ) (for full technical specifications of mechanical components refer Annexure \"A\" in the tender document)	3	Job
106	69	Supply, Installation, Testing & Commissioning of Pumping Units at FilterWater Stage. (details mentioned in the tender document)	3	Job
107	70	Supply, laying, fitting, testing and commissioning of 200 MM Nominal diameter, 7 MM Thick, (heavy-class), G.I. flanged pipe line (as per technical details as under) to be used as common rising main from delivery Manifold of 02 No. Open well type Submersible type pumping units up to the Pre Settling tank (PST) of Lift water supply scheme Augmentation Ratnipora. (for full technical specifications of mechanical components refer Annexure \"A\" in the tender document)	100	Mtr
108	71	Fabrication, providing, fitting, testing and commissioning of delivery Manifold(Y-Junction). Delivery Manifold shall have to be fabricated out of C-Class, G.I. pipe and shall be of same size as per the designed delivery size of the pumping unit for connecting the delivery of 02 no. pumping units with the rising main end including providing and fitting of matching flanges of delivery side of the pumping unit. The job shall include Providing & Fitting of 02 No D.I. Non-Return Valves and 02 No D.I sluice valves. The size of the valves shall be inconformity with the designed delivery manifold/Y-junction of the pumping unit. The job further includes Providing & Fitting of matching flanges for fitting of valves as per IS-6392 and steel Nuts and bolts as per IS-1364-2002 and gaskets as per IS-638/79 with all necessary fittings i. e. Bends-08 Nos, Reducers, etc. complete in all respect for complete job and strictly as per the requirement of the site conditions/department (for full technical specifications of mechanical components refer Annexure \"A\" in the tender document)	1	Job
109	72	Pipe line (as per IS: 1239) Providing/laying/Fitting of 125mm Class (B) GI rising main (for full technical specifications of mechanical components refer Annexure \"A\" in the tender document)	100	Mtr
110	73	Providing, fitting, testing and commissioning of 125mm nominal dia. heavy duty ductile iron Sluice valve of rating PN 1.6. The valve shall have body and bonnet of ductile iron fully covered with rubber (EPDM) approval identical seal on both sides, with integrated rubber joint protected against overload, body seat cast iron, bolts and nuts of stainless steel (A2).(for full technical specifications of mechanical components refer Annexure \"A\" in the tender document)	2	Job
111	74	Providing, fitting, testing and commissioning of 125mm nominal dia. heavy duty ductile iron, NRV of rating PN 1.6. The valve shall have body and bonnet of ductile iron, with drainage plug disk of ductile iron, fully covered with rubber (EPDM) approval identical seal on both sides, with integrated rubber joint protected against overload, body seat cast iron, bolts and nuts of stainless steel (A2). (for full technical specifications of mechanical components refer Annexure \"A\" in the tender document)	2	Job
112	75	Fabrication and fitting of delivery flanged piping arrangement with wash out manifold fabricated out of 125 mm pipe (20mtr), P/F of G.I Y-Junction as per site requirement, P/F of G.I. flanged bend (4 nos.) and Flanged Tee (1nos) made out of 80 mm dia. G.I. pipe class “B” as per specifications mentioned above. The job includes P/F of sluice valve 80mm dia. VAG/AVK make-01 on The flange thickness shall be 18 mm and as per IS – 6392. Job includes P/F of M16 flange bolts / nuts chrome plated for connecting the pumping unit with the delivery Manifold.	1	Job
113	76	P/F of Electro Magnetic flow meter (Kronhe Marshall type) (for full technical specifications of mechanical components refer Annexure \"A\" in the tender document)	1	Job
114	77	Providing of tool kit (for full technical specifications of mechanical components refer Annexure \"A\" in the tender document)	2	Job
115	78	Providing/fitting of thermo cool 12mm thick along with jute matting/excel(of reputed make) for 12’x14’ operators room.	2	Job
116	79	Providing of the following material for the employees in the operator’s room working during night shift. The material shall be supplied at the site (for full technical specifications of mechanical components refer Annexure \"A\" in the tender document)	2	Job
117	80	Providing of bed fabricated out ISA 40x40x5mm having dimensions of 6’x6’x2.5’ (L x B x H) and the central horizontal support fabricated out of MS Strip of 50mm wide & 4mm thick with spacing of 2 feet’s both length & widthwise & there should be total of six supporting vertical members. The job includes providing & fitting of 08 No of members each of one feet long at the corners for resisting lateral displacement & providing & fitting of 19mm thick wooden board of reputed make over the top of the bed. The job also includes Providing/fabrication of 10 feet’s high Ladder fabricated out of ISA 40x40x5mm & MS Strips of 50mm wide& 4mm thick. (for full technical specifications of mechanical components refer Annexure \"A\" in the tender document)	2	Job
118	81	ELECTRICAL WORKS TO BE EXECUTED AT RAW WATER STAGE Fabrication, Providing and fitting of Modular control panel for stage Ist. with appropriate size fabricated out of 16SWG sheet having required openings / vents and protection Class: 1P 55 & fitted with accessories (for full technical specifications of mechanical components refer Annexure \"A\" in the tender document)	2	Job
119	82	ELECTRICAL WORKS TO BE EXECUTED AT FILTER WATER STAGE:Fabrication, Providing and fitting of Modular control panel for stage2nd. . with appropriate size fabricated out of 16SWG sheet having required openings / vents and protection Class: 1P 55 & fitted with accessories (for full technical specifications of mechanical components refer Annexure \"A\" in the tender document)	2	Job
120	83	S/I/T/Commissioning of 50 KVA voltage stabilizer (for full technical specifications of mechanical components refer Annexure \"A\" in the tender document)	4	Job
121	84	Supply, Installation, Testing and Commissioning of 100 KVA-(level-2) 3 phase and natural air cooled Distribution Transformer (for full technical specifications of mechanical components refer Annexure \"A\" in the tender document)	2	Job
122	85	construction of substation (for full technical specifications of mechanical components refer Annexure \"A\" in the tender document)	1	Job
123	86	Providing, erection of 9 m long M S Tubular poles of designation 410 SP-33 and fitted with (450x450) mm size M.S plate at the bottom. The job also includes spiral earthing, painting of poles in silver colour, grouting of poles in CC blocks of (M-20 mix). P/F of danger plate indicating (11000V-DANGER) and nuts and bolts of assorted size, pin insulators as per site requirement. The job is inclusive of providing and fitting of brace (1000x40x5) mm and cross arm (ISMC 75, 1.5 m long) including screwed fasteners as per site requirement for holding of 11 KV pin insulators	5	Job
124	87	Providing, laying, testing and commissioning of 0.05 ACSR conductor to serve as HT line from HT tapping source to substation.	200	Mtr
125	88	Providing/ Fitting/Testing and commissioning of 11 KV lightening arrestor set (station type) as per REC standard conforming to IS 3070 Part III. Test certificate from the Manufacturer must be produced on delivery of the item.	1	Job
126	89	Providing/ Fitting/Testing / Commissioning of 11 KV G.O link set (3 pieces) of reputed make as per REC Standard including Pipe of suitable Length & diameter for its operation. Test certificate from the Manufacturer must be produced on delivery of the item.	1	Job
127	90	Providing/ Fitting/Testing and commissioning of drop out Fuse Set (Horn –Gap type) suitable for 11 KV line as per REC Standard F6. Test certificate from the Manufacturer must be produced on delivery of the item.	1	Job
128	91	S/I/T/C of Earthing station for electrical gadgets installed at pump house comprising of company fabricated earthing electrode GI as per IS: 3043. The job includes Auguring of bore of 150mm dia. and 3.5M depth for installation of electrode along with backfill compound mixed with soil and all other items required thereof for achieving the best result. The job includes connecting of electric gadgets through GI strip of 25mm wide 3mm thick of appropriate length, making of surface structure in cement concrete material as per relevant standards (for full technical specifications of mechanical components refer Annexure \"A\" in the tender document)	2	Job
129	92	Providing, fitting, testing and commissioning Aluminum, 70 Sq.mm3.5 core, PVC sheathed Heavy Duty Make: L&T, armored LT industrial grade power cable from HT transformer to the main control panel as service mains. The conductor to be laid in air/ underground as per site requirement. The job also includes providing, fitting, crimping and taping suitable amperage Aluminum thimbles at the ends of the conductor. The job includes making a suitable hole in the wall for passing the above laid aluminum conductors as per the site requirement.(To be laid at R/W & Filter water stage as per the site requirement)	100	Mtr
130	93	Providing & fitting of 16 Sq.mm 3-core,415 ± 10% V standard insulated copper submersible cable of L&T make conforming to IS 694:1990 to be fitted with pumping unit from main control panel to modular control panel & interconnection of various other electrical gadgets. The job also includes providing, fitting, crimping and taping suitable amperage Copper thimbles at the ends of the conductor by hydraulic crimping tool.(To be laid at R/W & Filter water stage as per the site requirement)	200	Mtr
131	94	Supply/Erection/Testing & Commissioning of 9mtr long Hot Dip Galvanized octagonal pole (Single Section) with bottom 200 mm, top 90mm wide thickness 3mm with 70 microns’ zinc coating with inside arrangement for providing of power connection (for full technical specifications of mechanical components refer Annexure \"A\" in the tender document)	2	Job
132	95	Supply, Installation of Testing & Commissioning of 120 watts Led (Street light Type) (for full technical specifications of mechanical components refer Annexure \"A\" in the tender document)	6	Job
133	96	Supply, Laying, Testing & commissioning of 2x 10 mm2 XLPE Aluminum Armoured Cable. Make: Havells/L&T (To be laid at R/W & Filter water stage as per the site requirement)	150	Mtr
134	97	Supply, Installation testing & commissioning of DP, MCB (Make: Havells/Anchor/L&T) of required rating enclosed in steel enclosure including cost of lugs, Cable Gland etc. (One Job To be carried out at R/W stage & One at F/W stage)	2	Job
135	98	Providing & Fitting of lighting points in 1.5 mm Sq. multi strand PVC wire as conductor to be laid /carried in PVC channel /conduit as per site requirement. The Job also includes Providing and fitting of 5 Amp. Switch Button /angle holders to be fitted with 15 watt LED Phillips / Havells/Halonix LED inside the Pump house.(Ten Jobs To be carried out at R/W stage & Ten at F/W stage)	20	Job
136	99	Providing & fitting of heating points in 2.5 sq. multi stand conductor (Make: Havell/ L&T) to be laid & carried in PVC channel/Conduit as per site requirement. The job includes providing and fitting of 16 Amp. Switch socket combine Havells/Phillips/Anchor/ABB. (Four Jobs To be carried out at R/W stage & Four at F/W stage)	8	Job
137	100	Providing /Fitting of distribution board SP & N (Regal Grey) with 01 No of incoming & outgoing 16 ways, Make-QVE (DB) Havells/ABB make, fitted with mini MCB series 08 No with current carrying capacity of 6A for lighting in pump house, 04 No with current carrying capacity of 10A for controlling flood lights & 02 No with current carrying capacity of 16 A for heating points & 63 Amps MCB for mainsMake: Havells/Phillips/Anchor/ABB. The job includes the cost of 4mm2 multi stranded conductor to be laid as service line for Lighting system. (One Job To be carried out at R/W stage & One at F/W stage)	2	Job
138	101	The job further includes providing and fitting of ceiling fan of 1200mm sweep,220-230V ,50 Hz with high delivery, energy efficient performance, quick start high torque motor, wide angle air flow with double twisted blades along with 2.5mm multi strand wire and PVC conduit/Channel and dimmer switch & board for operation of the fan.Make:/Havells/Usha/Bajaj/ Halonix Krypton with minimum 2 years of manufacture warranty. (One Job To be carried out at R/W stage & One at F/W stage)	2	Job
139	102	Providing/Fitting of 12 volts 24 plates Tabular battery of 180 AH along with 1050-1100VA inverter at the operator’s room including trolley. The job includes the cost of wiring in 1.5 Sq.mm multi strand copper conductor along with 02 nos’ of 16 A Switch Socket combined with box and 02 nos’ of 6 A 3 pin top for connecting the inverter with the electric mains. Make: Havells/Phillips/Anchor/ABB. The job includes the cost of 4mm2 multi stranded conductor to be laid as service line for Lighting system. Make: Exide (Battery & Inverter) with minimum of 36 months’ manufacture warranty. (One job to be carried out at R/W stage & One at F/W stage)	2	Job
140	103	Providing/ laying of 11KVA high density shock proof rubber matting of reputed make & of suitable thickness as per the latest IS Codes on the machine area. The job includes removing dust, dirt, grease & loose sand grains if any before applying the adhesive of sufficiently high bonding strength for fixing the rubber matting on to the floor :Note: Test certificate from the Manufacturer must be produced on delivery of the item.\n(To be laid at R/W & F/W stage)\n	200	Sft
141	104	Providing/Fitting of 95 mm (10 nos.) & 10mm (10 nos.) copper thimbles	20	No
142	105	Providing/Fitting of 19/16 PVC Copper wire for interconnection with necessary Dowel makes thimbles.	100	Mtr
143	106	Providing/Fitting of 150 mm width Steel perforated cable trays along with duct ,bends for accommodating interconnection cables	30	Mtr
144	107	Providing and fitting of sign boards on sheet metal with proper frame work with blue back ground & written in white. As per requirements.(for full technical specifications of mechanical components refer Annexure \"A\" in the tender document)	2	Job
145	108	Providing and fitting of 01 No. LED (scroll type) sign board fabricated out of stainless steel and metal showing the names of water supply scheme and the Department. Size: 5’×1’6”	7.5	Sft
146	109	The 62.5KVA Diesel Generating Set, which shall be suitable to operate at site conditions having an altitude of 1600 Mtrs (AMSL) Ambient Temperature -10°C to 40°C and 80% Relative Humidity, comprising of Diesel Engine and Alternator coupled together with heavy duty flexible coupling and mounted on a fabricated MS Channel Base Frame along with standard accessories, Control Panel, Battery, Anti vibration pads and Acoustic Enclosure, duly painted and confirming to Noise pollution specification/ requirements of Environmental Protection Rules 1986 as laid down by Ministry of Environment & Forests read with GSR71(E) Dtd: 17-02-2002 and GSR520(E) Dtd: 01-07-2003 with respect of Emission norms for the engine and with respect of Noise level of DG sets read with up to date amendments and as applicable at the time of supply. The Engine shall confirm to IS:10000/BS649/BSS5514. The D G Sets shall be rated for continuous duty with overload provision of 10% for the period not exceeding one hour in 12 hours.(for full technical specifications of mechanical components refer Annexure \"A\" in the tender document)	1	Job
147	110	PCC Foundation and Canopy for DG Set. Earth work in excavation by mechanical means (Hydraulic excavator) over areas exceeding 30cm in depth, 1.5mtr in width as well as 10 sq.m on plan including disposal of excavated earth, lead up to 50m and lift up to 1.50 m, disposed earth to be levelled and neatly dressed (for full technical specifications of mechanical components refer Annexure \"A\" in the tender document)	6.8	Cum
148	111	Providing and laying of stone soling hand packed in horizontal including carriage of 06 Kms, leads, lifts etc. (for full technical specifications of mechanical components refer Annexure \"A\" in the tender document)	17.28	Cum
149	112	Providing and laying of 6 inch PCC of 7.5 mix as mud mat including carriage, leads and lifts. =2x(12’+6’)x2’0”x0’6’’ = 36 cft = 1.02 cum	1.02	Cum
150	113	Providing and laying of P.C.C in 1:2:4 mix (1 cement: 2 coarse sand: 4 graded stone aggregate 40mm nominal size) including carriage, leads and lifts. (for full technical specifications of mechanical components refer Annexure \"A\" in the tender document)	5.18	Cum
151	114	Providing and laying of shuttering/centering including propping, strutting etc. =(2x12’+2x10’+2x8’+2x6)x2’ = 144 sft = 10.75 m2	10.75	Sqm
152	115	Supply and fabrication of canopy including vertical posts, horizontals, truss etc. The fabrication work shall be done by a skilled labour and welding work should be of standard quality (for full technical specifications of mechanical components refer Annexure \"A\" in the tender document)	843.68	Kg
153	116	Colour coated CGI (Roofing, ridges): 24SWG gauge =2x(15’x8’) = 240 sft= 22.32 sq.m Cost on account of J-hooks, washers etc is included in the scope of work.	22.32	Sqm
154	117	Colour coated CGI (Roofing, ridges): 18SWG gauge plain Ridge=1’x15’-0”=15 sft	1.39	Sqm
155	118	Providing, fabrication and fitting of welded MS wire mesh (0.50 sq. Inch and 1.40 mm wire dia.) for walls and gables of the canopy.	450	Sft
156	119	Painting of whole MS Frame works including angle iron structure, wire mesh etc. with two coats of red oxide and two coats of enamel paint after thorough surface cleaning by using proper grade of emery paper.	1	Job
157	120	Surface dressing of the ground including removing vegetation and inequalities not exceeding 15cm deep and disposal of rubbish, lead up to 50m and lift up to 1.5m in all kinds of soil. (for full technical specifications of mechanical components refer Annexure \"A\" in the tender document)	30.11	Sqm
158	121	Earth work in excavation by mechanical means (Hydraulic excavator) over areas exceeding 30cm in depth, 1.5mtr in width as well as 10 sq.m on plan including disposal of excavated earth, lead up to 50m and lift up to 1.50 m, disposed earth to be levelled and neatly dressed. (for full technical specifications of mechanical components refer Annexure \"A\" in the tender document)	13.43	Cum
159	122	Providing and laying of stone soling hand packed in horizontal including carriage of 06 Kms 2x(17’+15’)x2’x0’-6”+1x15’x2’x0’-6”+1x14’x14’x2’-0” = 275 cft	7.79	Cum
160	123	Providing and laying of 6 inch PCC of 7.5 mix as mud mat including carriage. 2x(17’+15’)x2’x0’-6” + 1x15’x2’x0’-6” = 79 cft	2.23	Cum
161	124	Providing and laying of P.C.C in 1:2:4 mix (M 15) including carriage, all leads and lifts. The job includes dressing of slab, fixing of Angle iron anchors for framework, curing, formwork etc. 2x(18’+15’)x2’x2’ +1x15’x2’x2’ = 324 cft	9.18	Cum
162	125	Providing/laying of Shuttering/centering including propping, strutting etc. 2x[2x(5.18m+4.57m)]x0.6m+2x3.35mx0.6m	25.41	Cum
163	126	Providing/laying of 6mm thick cement plaster of 1:4 mix including carriage, all leads and lifts. (for full technical specifications of mechanical components refer Annexure \"A\" in the tender document)	44.35	Sqm
164	127	Mechanical works: Fabrication of MS framed structure for PUF paneling (for full technical specifications of mechanical components refer Annexure \"A\" in the tender document)	1514.63	Kg
165	128	PUF Enclosure (Walls, Ceiling and ridges): It shall be made up of 60 mm thick rigid PUF, CFC free with profile surface on one side, conforming to IS-12436-88 with subsequent amendments having density of 40±2 kg/m3 sandwiched between 0.5 mm pre-painted Galvanized steel sheet as per IS-14246-95 with subsequent amendments with 18-20 microns of Exterior Polyester Coating of white color on epoxy primer on both sides. The basic substrate shall be Gr-120 Hot dip Galvanized steel. The panels shall be made by continuous line and shall be joined together by means of Tongue-n-groove joint system. The joints shall be air-tight by using proper sealant (like silicon PU foam etc). The PUF panels shall have closed cell content of 90-95%; Thermal Conductivity of 0.023 at 10W/mK; Compressive strength of 2.1 Kg/m2 9 (at 10% deformation); Water vapor permeability 0.08-0.12 gm/h_m2; Self-extinguishing fire property. Make : Lloyd Insulation, Jindal Mectec (detals as per tender document)	95.24	Sqm
166	129	Eaves boarding (8inch)	21.94	RM
167	130	Color coated CGI Roofing (24SWG gauge)	33.43	RM
168	131	Ridge	5	RM
169	132	Providing/Fabrication/Fitting of Aluminum framed doors and windows (for full technical specifications of mechanical components refer Annexure \"A\" in the tender document)	1	Job
170	133	P/F of Anchorage mechanism made up of MS plates 08 mm thick required for anchorage of vertical posts, Horizontals, truss works complete. The jobs include cutting/welding works to be carried out as per site requirement (for full technical specifications of mechanical components refer Annexure \"A\" in the tender document)	125.6	Kg
171	134	Painting of whole MS Frame with two coats of red oxide and two coats of enamel paint after surface cleaning by using proper grade of emery paper. (for full technical specifications of mechanical components refer Annexure \"A\" in the tender document)	1	Job

Also Visit

Tenders

Jammu And Kashmir Tenders

Construction Tenders

Civil Construction Tenders

Civil Work Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Design, Construction, Successful Testing & Commissioning Of Pre-Settling Tank, 0.50 Mgd Capacity Rapid Sand Filtration Plant With Rcc Oht Of 1.00 Lac Gallons Capacity, Clarifloculator, Flash Mixer, 0.50 Lac Gallons Capacity Clear Water Sump, 4 No. Sluice , Ratnipora-Jammu And Kashmir

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Design, Construction, Successful Testing & Commissioning Of Pre-Settling Tank, 0.50 Mgd Capacity Rapid Sand Filtration Plant With Rcc Oht Of 1.00 Lac Gallons Capacity, Clarifloculator, Flash Mixer, 0.50 Lac Gallons Capacity Clear Water Sump, 4 No. Sluice , Ratnipora-Jammu And Kashmir

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us