| 1 | 1 | Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m. | ITEM 1 | 1440 | Sqm |
|---|
| 2 | 2 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in\nwidth or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and\ndisposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil. | ITEM 2 | 137.74 | Cum |
|---|
| 3 | 4 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size) | ITEM 4 | 28.6 | Cum |
|---|
| 4 | 5 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand) | ITEM 5 | 90.06 | Cum |
|---|
| 5 | 6 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in\nall shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand) | ITEM 6 | 134.78 | Cum |
|---|
| 6 | 7 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement :4 coarse sand) | ITEM 7 | 71 | Sqm |
|---|
| 7 | 8 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size). | ITEM 8 | 87.33 | Cum |
|---|
| 8 | 9 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns,\npillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size). | ITEM 9 | 13.95 | Cum |
|---|
| 9 | 10 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size). | ITEM 10 | 22 | Cum |
|---|
| 10 | 11 | steel reinforceement for R.C.C work including straightening cutting bending placeing in positiuon and binding all complete upto plinth level hot rolled deformed bars | ITEM 11 | 12096.9 | Kg |
|---|
| 11 | 12 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Hard drawn steel wire | ITEM 12 | 123.28 | Kg |
|---|
| 12 | 13 | Centering and shuttering including strutting, propping etc. and removal of form for all heights Foundations, footings, bases of columns, etc. for mass concrete. | ITEM 13 | 140.53 | Sqm |
|---|
| 13 | 14 | Centering and shuttering including strutting, propping etc. and removal of form for all heights Columns, Pillars, Piers, Abutments, Posts and Struts. | ITEM 14 | 276.56 | Sqm |
|---|
| 14 | 15 | Centering and shuttering including strutting, propping etc. and removal of form for all heights Lintels, beams, plinth beams, girders, bressumers and cantilevers | ITEM 15 | 162.8 | Sqm |
|---|
| 15 | 16 | Ceterning and suttering including strutting propping etc. And removal of from for all height | ITEM 16 | 15.3 | Sqm |
|---|
| 16 | 17 | 12 mm cement plaster : 1:4 (1 cement : 4 coarse sand) | ITEM 17 | 1148.4 | Sqm |
|---|
| 17 | 18 | 62 mm thick cement concrete flooring with concrete hardener topping, under layer 50 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) and top layer 12mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate, 6mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacture’s specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete. | ITEM 18 | 374 | Sqm |
|---|
| 18 | 19 | Finishing walls with water proofing cement paint of required shade New work (Two or more coats applied @ 3.84 kg/10 sqm). | ITEM 19 | 1274.4 | Sqm |
|---|
| 19 | 20 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture | ITEM 20 | 1246.46 | Sqm |
|---|
| 20 | 21 | Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angles 40x40x6 mm for diagonal braces | ITEM 21 | 5.4 | Sqm |
|---|
| 21 | 22 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes | ITEM 22 | 6542.03 | Kg |
|---|
| 22 | 23 | Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.1.00 mm thick with zinc coating not less than 275 gm/m² | ITEM 23 | 610 | Sqm |
|---|
| 23 | 24 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. ANGLE 40*40*[email protected]/Rm Door 1.05*2.10 Window 1.05*1.05 | ITEM 24 | 58.8 | Kg |
|---|
| 24 | 25 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately, all complete as\nper direction of Engineer-in-charge. Second class teak wood 35 mm thick shutters | ITEM 25 | 4.41 | Sqm |
|---|
| 25 | 26 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws | ITEM 26 | 8.82 | Sqm |
|---|
| 26 | 27 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding | ITEM 27 | 50 | Kg |
|---|
| 27 | 28 | Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete. With 12 mm mild steel U beading | ITEM 28 | 4.41 | Sqm |
|---|
| 28 | 29 | Brick on edge flooring with bricks of class designation 7.5 on a bed of 12 mm cement mortar, including filling the joints with same mortar, with\ncommon burnt clay non modular bricks 1:4 (1 cement : 4 coarse sand) | ITEM 29 | 374 | Sqm |
|---|
| 29 | 30 | Wiring for light point/ fan point/ exhaust fan point/ call bell point\nwith 1.5 sq.mm FRLS PVC insulated copper conductor single\ncore cable in surface / recessed steel conduit, with piano type\nswitch, phenolic laminated sheet, suitable size MS box and\nearthing the point with 1.5 sq.mm FRLS PVC insulated copper\nconductor single core cable etc. as required. | ITEM 30 | 25 | Each |
|---|
| 30 | 31 | Providing and fixing15 mm dia nominal bore G I pipe complete with G.I. fittings and clamps, i/c making good the wall etc . Concealed pipe, including with anti corrosive bitumastic paint, cuttings chases and making goods the wall etc complete. | ITEM 31 | 100 | Rm |
|---|
| 31 | 32 | Providing and fixing 25 mm dia G I pipe nominal complete with G.I. including trenched and refilling etc.(External work ) | ITEM 32 | 100 | Rm |
|---|
| 32 | 33 | Providing and placing on terrace (at all floor levels) polyethylene water storagetank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. | ITEM 33 | 2000 | Ltr |
|---|
| 33 | 34 | Supply and fixing C.P. brass bib cock approved quality conforming to IS 89.31: 15 mm dia nominal bore. | ITEM 34 | 20 | Nos. |
|---|
| 34 | 35 | Providing and fixing wash basin C.I. Brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard patern, including painting of fittings and brakets, cutting and making goods the wall wherever required : White Vitreous China wash basin size 630x450 mm . | ITEM 35 | 2 | Nos. |
|---|
| 35 | 36 | p/f white vitreous china flat back or wall corner typelipped front urinal basin of 430*260*350 mm and 340*410*265mm size respectively with automatice flushing cisten one urinal basin with 5liter white P.V.Cautomatice flushing cistern | ITEM 36 | 2 | Nos. |
|---|
| 36 | 37 | Providing and fixing brass stop cock of approved quality 15mm dia | ITEM 37 | 10 | Nos. |
|---|
| 37 | 38 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes 110 mm diameter | ITEM 38 | 10 | Nos. |
|---|
| 38 | 39 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Semi rigid pipe 32 mm dia | ITEM 39 | 10 | Nos. |
|---|
| 39 | 40 | Making connection of drain or sewer line with existing manhole\nincluding breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement and making necessary channels for the drain etc. complete For pipes 100 to 250 mm diameter | | 2 | Each |
|---|
| 40 | 41 | Elbow 90 degree for 15.88 mm outer dia SS pipe | | 10 | Each |
|---|
| 41 | 42 | Equal Tee for 15.88mm outer dia ss pipe | | 20 | Each |
|---|
| 42 | 43 | Slip coupling/socket 15.88mm outer dia ss pipe | | 4 | Each |
|---|
| 43 | 44 | stainless steel Cap for 15.88mm outer dia ss pipe | | 5 | Each |
|---|
| 44 | 45 | S/F Submersible Pump as Per Market Rate | | 1 | Each |
|---|