Sales : +91-777 804 8217
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 10-06-2020 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 17-06-2020 |
| 2 | 02-06-2020 | BOQ | BOQ | 10-06-2020 |
| Name of Work : SPECIAL REPAIR TO BLDG NO P-149 AND TRAINEE BILLET AT AF STN CHANDINAGR UNDER GE (AF) FARIDABAD | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Dismantling of floor hearth and wall tilling incl mortar beding removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engineer-in-Charge. | 1 | 1200 | Sqm |
| 2 | 2 | Demolition of cement concrete unreinforced of any description and in any position not otherwise specifically provided for & removing of rubbish from premises of defence land complete all as specified and directed by Engineer-in-Charge. | 2 | 57 | Cum |
| 3 | 3 | Demolition of un-reinforced cement concrete in ground floors and pavings not exceeding 15 cm thickness (below or above ground floors).complete all as specified and directed by Engineer-in-Charge. | 3 | 23.63 | Cum |
| 4 | 4 | Demolition of brick work or stone/boulder masonary built in cement mortar of any specification and in any position complete all as specified and directed by Engineer-in-Charge. | 4 | 22 | Cum |
| 5 | 5 | Taking down cement plaster any description, including raking out joints, hacking for key, scrubbing down with water, etc. including removing debris from premises complete all as specified and directed by Engineer-in-Charge. | 5 | 4675 | Sqm |
| 6 | 6 | Dismantling of stone slabs and tiles laid dry or laid dry and pointed of any description or thickness in floors, aprons etc complete all as specified and directed by Engineer-in-Charge. | 6 | 255 | X Sqm |
| 7 | 7 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) of size exceeding 1.50 Sqm but n. exc 4.0sqm each including cutting holes in walls of appropriate size for insertion of cement concrete blocks for hold fasts complete all as specified and directed by Engineer-in-Charge. | 7 | 72 | Each |
| 8 | 8 | Complete all as item No 7 above but not exc 1.5sqm each.complete all as specified and directed by Engineer-in-Charge. | 8 | 619 | Each |
| 9 | 9 | M&L for brick work with sub class \"B\" brick straight or curved on plain to any radius in half brick thick walls built in built in cm 1:4 complete all as specified and directed by Engineer-in-Charge. | 9 | 189 | Sqm |
| 10 | 10 | M&L for cutting into old masonary to form toothing for and bonding in new brick or stone work including making good in cement mortar all as directed. | 10 | 32 | Sqm |
| 11 | 11 | M&L 15mm thick rendering in cement mortar (1:6) on brick wall or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge. | 11 | 1160 | Sqm |
| 12 | 12 | M&L Rendering 15mm thick in cement mortar (1:4) on brick walls or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge. (WPC shall be paid under respective item) | 12 | 2733 | Sqm |
| 13 | 13 | M&L for rendering 5 mm thick in CM 1:3 for ceilings even and smooth without using extra cement. complete all as specified and directed by Engineer-in-Charge. | 13 | 682 | Sqm |
| 14 | 14 | M&L for preparation of old distempered surface of walls including washing down and stopping of distempered surfaces and applying one coat of distempered oil emulsion complete all as specified and directed by Engineer-in-Charge. | 14 | 3500 | Sqm |
| 15 | 15 | M&L for preparation of previously treated plastered surface of ceilings including cornices etc, and cleaning by brooming down and applying one coat of white wash on ceiling all as specified and directed. | 15 | 4118 | Sqm |
| 16 | 16 | M&L for preparing New plastered surfaces and applying two coats of distemper oil emulsion including chalk whitening preparatory to distempering on surfaces of walls. | 16 | 1460 | Sqm |
| 17 | 17 | M&L for three coats of white wash on new plaster surfaces but in ceilings complete all as specified and directed by Engineer-in-Charge. | 17 | 832 | Sqm |
| 18 | 18 | M&L for preparation of new surfaces of walls and applying two coats of plastic emulsion paint , white or tinted complete all as specified and directed by Engineer-in-Charge. | 18 | 1065 | Sqm |
| 19 | 19 | M&L for preparation of old surfaces of walls and applying two coats of plastic emulsion paint, white or tinted including complete removal of existing treatment. complete all as specified and directed by Engineer-in-Charge. | 19 | 2567 | Sqm |
| 20 | 20 | Supply only water proofing compound approved make.complete all as specified and directed by Engineer-in-Charge. | 20 | 1011 | Kg |
| 21 | 21 | S&F non skid ceramic coloured tiles 7 to 8mm thick (squre/rectangular) area of each tile exc 0.06sqm but n.exc 0.11 sqm, in floors etc. over 15mm thick screed bed in CM 1:6 complete except pointing all as specified. Note ;- (Tile pointing shall be paid for separatly) | 21 | 540 | Sqm |
| 22 | 22 | Providing and Applying tile Grout, 3 component water mix with epoxy resin tile joint filler based on new generation epoxy resin technology supplied in pre-weighed packs, ready for onsite mixing for a joint of 1mmx3mm with a covers 13 rmts in 1 kg and use as per the manufacturers Current Data Sheet.complete all as specified and directed by Engineer-in-Charge. | 22 | 540 | Sqm |
| 23 | 23 | M&L Glazed ceramic coloured/printed tiles (colour & shade as approved) of size area exc 0.06sqm but n. exc 0.14 sqm and 7-8mm thick in vertical surfaces as in skirting and dado set and jointed in neat cement slurry, over 15mm thick rendering in cement mortar (1:4) and pointed. in white cement with pigment to match the colour of tiles complete all as specified and directed by Engineer-in-Charge. | 23 | 1200 | Sqm |
| 24 | 24 | M&L 75mm thick, Cement concrete (1:3:6) type C-2 using 40 mm graded stone aggregate, surfaces finished even and smooth without using extra cement and plinth protection/ hard standing including complete all as specified and directed by Engr-in-Charge | 24 | 610 | Sqm |
| 25 | 25 | M&L 75mm thick, Cement concrete (1:3:6) type C-2 using 40 mm graded stone aggregate as in sub base finished even and rough to receive top layer complete all as specified and directed by Engineer-in-Charge. | 25 | 35 | Sqm |
| 26 | 26 | Material and labour for plain cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregate ) as in roof padding, coping, benching and similar etc finished even and fair complete all as specified and directed by Engineer-in-Charge. | 26 | 1.5 | Cum |
| 27 | 27 | Material and Labour for PCC 1:5:10 type E2 using 40 mm graded stone aggregate as in sub base flooring complete all as specified and directed by Engineer-in-Charge. | 27 | 54 | Cum |
| 28 | 28 | M&L machine cut kota stone slab flooring 18-20mm thick over and including 15mm thick screed bed of cement mortar 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed by Engr-in-Charge | 28 | 2320 | Sqm |
| 29 | 29 | M/L machine cut Kota stone slab 16-18 mm thick in riser of steps, skirting, dado and pillar laid and including 15mm thick rendering of cement mortar 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed by Engr-in-Charge | 29 | 224 | Sqm |
| 30 | 30 | M&L reinforcement 10mm and over using TMT bars cut to length bent to shape as required including cranking bending spirally for hooking ends and binding with and including mild steel wire (annealed not less than 0.9mm dia or securig with clips etc complete all as specified and directed by Engineer-in-Charge. | 30 | 330 | Kg |
| 31 | 31 | M&L reinforcement 6mm to 8mm TMT bars cut to length bent to shape as required including cranking bending spirally for hooking ends and binding with and including mild steel wire (annealed not less than 0.9mm dia or securig with clips etc complete all as specified and directed by Engineer-in-Charge. | 31 | 185 | Kg |
| 32 | 32 | M&L for Precast cement concrete 1:2:4, type B1 (Using 20 mm graded granite stone aggregate) in landings, cover slabs (for manholes etc.) chullah hoods, chajjas, water troughs, mangers,shelves and similar articles with plain faces and set in cement mortar 1:4.complete all as specified and directed by Engineer-in-Charge. | 32 | 2.3 | Cum |
| 33 | 33 | Formwork to soffits of suspended slabs such as flat roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping). complete all as specified and directed by Engineer-in-Charge.\n | 33 | 34 | Sqm |
| 34 | 34 | Use and waste of form work to edges of concrete flat, tread, similar work exceeding 5 cm but not exceeding 10 cm wide for rough finish surfaces of concrete complete all as specified and directed by Engineer-in-Charge. | 34 | 100 | RM |
| 35 | 35 | M&L for reinforced cement concrete 1:2:4 type B1 (using 20mm graded crushed stone aggregate) as in slabs supported on walls, beams and columns in floor roofs,landings and in shelves,chajjas complete all as specified and directed by Engineer-in-Charge. | 35 | 3 | Cum |
| 36 | 36 | M&L for 20mm thick granite (of any type) work (table rubbed and polished ) in steps, jambs, pillars, window cills, cooking plateforms and like over 15mm thick screed bed in CM 1:6 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite including moulding work on exposed edges of granite stones complete all as specified and directed by Engineer-in-Charge. | 36 | 20 | Sqm |
| 37 | 37 | S&F in repair Vitreous China wash basin, white, flat back, size 550X400 excluding taps, waste, chain and plug and porcelain stopper but including brackets and 32 mm dia waste coupling of PTMT (min weight 45gms).complete all as specified and directed by Engineer-in-Charge. | 37 | 50 | Each |
| 38 | 38 | S&F 25mm dia PVC waste pipe 75 cms long with necessary fixing arrangement.complete all as specified and directed by Engineer-in-Charge. | 38 | 50 | Each |
| 39 | 39 | S&F in repair pillar taps, Cast Copper alloy, with capstan heads, chromium plated, fency type screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe.complete all as specified and directed by Engineer-in-Charge. | 39 | 50 | Each |
| 40 | 40 | Dismantling wall and ceiling boards (fibre, pulp, insulatation etc) or inslulation boards /slabs/blanket / louvers / jalli any thickness including cover fillets complete all as specified and directed by Engineer-in-Charge. | 40 | 47 | Sqm |
| 41 | 41 | S&F Plain aluminium sheeting 0.71mm thickness, Alloy 31000 H4 in ridges, hips, valley gutter, drip , covering crumple joint and straight flashing (length and girth as fixed) including necessary fixing to wall with steel screws and PVC rawl plug complete all as specified and directed by Engr in Charge. | 41 | 47 | Sqm |
| 42 | 42 | S&F pressed steel frames of size 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete all as specified and directed by Engr-in-Charge | 42 | 374 | RM |
| 43 | 43 | M&L for PCC 1:3:6 type C1 (using 20 mm graded aggregate stone aggregate) as in filling of pressed steel door frames and as in hold fast blocks including all form work complete all as specified and directed by Engr-in-Charge | 43 | 3.55 | Cum |
| 44 | 44 | S&F anodised aluminium frame of standard section for doors, windows , ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed by Engineer-in-Charge. | 44 | 30 | Kgs |
| 45 | 45 | S&F anodised aluminium window and ventilator shutters , side hung type / sliding without sash bars, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, ruber packing , anodised aluminum snap beading , screws, anodised aluminium fittings such as peg stays 150mm long (1nos). hinges type B-21 100mm long (2nos) suitable handle (1nos) complete all as specified and directed by Engineer-in-Charge. | 45 | 5 | Sqm |
| 46 | 46 | S&F 3mm thick figured glass, pin head type and glazing with oil putty in squares not exceeding 0.50 Sqm each pane complete all as specified and directed by Engineer-in-Charge. | 46 | 3 | Sqm |
| 47 | 47 | S&F window or ventilators section of frame 72x55mm fixed to wall or concrete surface with rowl plugs made of galvanised steel powder coatd and section of shutter 47x20mm, mulion section 72x50mm ( Based steel as per IS 513 \"D\" qualilty galvanised as per IS 277 with zinc of 120 gms/sqm) glazed or gauged and wire gauge shutter prepare to receive wire mesh to the shutter (double bars powder coated fixed to window frame with screws including necessary fitttings and all builders harware such as alldles, tower bolts and stays etc compelete jall as specified and as directed. (Make : NCL type-4000 series (Note : Glass and wiremesh shall be measured and paid separately under respectibve tiems.) | 47 | 470 | Sqm |
| 48 | 48 | M&L Flush shutters, 30mm thick solid core construction, with block board core with 3mm BWP plywood face panels both face are covered with decorative face veneer with liping/frame to match.complete all as specified and directed by Engineer-in-Charge. | 48 | 143 | Sqm |
| 49 | 49 | S&F 35 mm thick Second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut mitred beads for securing glass etc sizes of members of shutters as specified in SSR part-I section 8, clause 8.24(a).complete all as specified and directed by Engineer-in-Charge. | 49 | 143 | Sqm |
| 50 | 50 | S&F Solid PVC door frame of size 50mm X47 mm made out of 5mm plain colour PVC sheet rinforced with MS Square tube suppling and fixing in opening as per specification and drawing.complete all as specified and directed by Engineer-in-Charge. | 50 | 480 | RM |
| 51 | 51 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails. M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bootom rail on either side & as gap insert for top rail and bottom rail ; Panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles. & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling and fixing in the frame at site as per specification & drawing. complete all as specified and directed by Engineer-in-Charge. | 51 | 114 | Sqm |
| 52 | 52 | S&F 100mm aluminium butt hinges extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed type B-21, complete all as specified and directed by Engineer-in-Charge. | 52 | 300 | Each |
| 53 | 53 | S&F butt hinges medium weight cold rolled mild steel and fixed 100mm complete all as specified and directed by Engineer-in-Charge. | 53 | 432 | Each |
| 54 | 54 | S&F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy complete all as specified and directed by Engineer-in-Charge. | 54 | 72 | Each |
| 55 | 55 | S&F 150 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed by Engineer-in-Charge. | 55 | 488 | Each |
| 56 | 56 | S&F Aluminium handles cast type anodised 150mm. complete all as specified and directed by Engineer-in-Charge. | 56 | 488 | Each |
| 57 | 57 | S&F MS 300mm ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed by Engineer-in-Charge. | 57 | 72 | Each |
| 58 | 58 | S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed by Engineer-in-Charge. | 58 | 420 | Sqm |
| 59 | 59 | M&L Sheet glass, ordinary quality 4mm thick and glazing with oil putty in square exc 0.5 sq. m in each pane, in existing in metal frames glazed with putty/beads including removing loose or decayed putty/beads, painting/oiling one coat on rebates, grooves, reputtying and painting/oiling puttied surface to match existing work.complete all as specified and directed by Engineer-in-Charge. | 59 | 335 | Sqm |
| 60 | 60 | Preparation of new wooden or wood based surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed by Engineer-in-Charge. | 60 | 514 | Sqm |
| 61 | 61 | Preparation of new steel surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engineer-in-Charge. | 61 | 135 | Sqm |
| 62 | 62 | S&F Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 including dismantling old one complete all as specified and directed by Engr-in-charge. | 62 | 1000 | Kg |
| 63 | 63 | S&F in repair gun metal globe or gate valve 20mm bore with iron wheel head screwed both ends for iron pipe.complete all as specified and directed by Engineer-in-Charge. | 63 | 5 | Each |
| 64 | 64 | M&L in repairs Brass chromium plated shower rose 125mm size with or without swivel joints, any size, including fixing to steel pipeor union.complete all as specified and directed by Engineer-in-Charge. | 64 | 45 | Each |
| 65 | 65 | S & F in repair 10 ltr cxapacity PVC valveless , syphonic actoin type, flushing cistern, low level white, with inlet ball valve , float & handle including brackets complete all as specified and directed by Engineer-in-Charge. | 65 | 40 | Each |
| 66 | 66 | S&F in repair hat and coat hooks, solid body, aluminium 175mm to 250 mm complete all as specified and directed by Engineer-in-Charge. | 66 | 40 | Each |
| 67 | 67 | S&F in repair vitreous china urinal half stall type white with 32mm dia waste coupling of PTMT (min wt 45gm)32mmdia PVC wast pipe necessaty fixing arrangements spreader of PTMT for fixing of 15mmdia pipe(min wt 60 gm ) | 67 | 25 | Each |
| 68 | 68 | S&F in repairs Vitreous china urinal partition white of size 310x770 mm. Urinal partitions slabs terminating about 40cm above floor line | 68 | 20 | Each |
| 69 | 69 | S&F in repair urinal spreader of PTMT any colour for fixing with 15mm dia pipe (Minimum weight 60 gms). complete all as specified and directed by Engineer-in-Charge. | 69 | 30 | Each |
| 70 | 70 | S&F in repair steel grating doom 125mm dia with waste hole. complete all as specified and directed by Engineer-in-Charge. | 70 | 90 | Each |
| 71 | 71 | S&F in repair Towel Rail 450mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 170gms). complete all as specified and directed by Engineer-in-Charge. | 71 | 30 | Each |
| 72 | 72 | S&F in repairs 15 mm bore chromium plated bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule. complete all as specified and directed by Engineer-in-Charge. | 72 | 130 | Each |
| 73 | 73 | S&F in repairs PVC connections 15 mm size with PTMT nuts of length 450 mm. complete all as specified and directed by Engineer-in-Charge. | 73 | 30 | Each |
| 74 | 74 | S&F in repairs PVC connections 15 mm size with PTMT nuts of length 600 mm. complete all as specified and directed by Engineer-in-Charge. | 74 | 200 | Each |
| 75 | 75 | Taking up or down 25 mm bore steel tubing and connections, including cleaning for Refixing or removal to store. complete all as specified and directed by Engineer-in-Charge. | 75 | 60 | RM |
| 76 | 76 | Taking up or down 20 mm bore steel tubing and connections, including cleaning for Refixing or removal to store. complete all as specified and directed by Engineer-in-Charge. | 76 | 625 | RM |
| 77 | 77 | Taking up or down 15 mm bore steel tubing and connections, including cleaning for Refixing or removal to store | 77 | 300 | RM |
| 78 | 78 | S&F 15mm bore steel water tubes, medium grade, galvanised with all fittings and fixed complete to walls/ceilings or laid in trenches. complete all as specified and directed by Engineer-in-Charge. | 78 | 300 | RM |
| 79 | 79 | S&F 20 mm bore steel water tubes, medium grade, galvanised with all fittings and fixed complete to walls/ceilings or laid in trenches. complete all as specified and directed by Engineer-in-Charge. | 79 | 625 | RM |
| 80 | 80 | S&F 25 mm bore steel water tubes, medium grade, galvanised with all fittings and fixed complete to walls/ceilings or laid in trenches.complete all as specified and directed by Engineer-in-Charge. | 80 | 60 | RM |
| 81 | 81 | S&F In repair 25 mm bore Stop valves, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions.complete all as specified and directed by Engineer-in-Charge. | 81 | 10 | Each |
| 82 | 82 | S&F in repair 600x450 mm beveled edge looking mirror of selected quality glass and backing with 6mm thick AC building board and fixed to wall with PVC rawl plugs with chromium plated brass screws and cup washers complete all as specified and directed by Engineer-in-Charge. | 82 | 40 | Each |
| 83 | 83 | S& F in repairs vitreous china squatting pan, orissa pattern size 580 x 440 mm white with integral foot rest incl provision of lime concrete bedding etc complete. | 83 | 49 | Each |
| 84 | 84 | S&F in repair angle cock / stop cock cast copper alloy, fancy type chromium plated, 15 mm dia of bore. | 84 | 330 | Each |
| 85 | 85 | S&F in repair Stop valves, fancy type, chromium plated with long shank and cup (concealed type) screwed down, high pressure, with crutch or butterfly handle, screwed both ends for15 mm bore iron pipe or for unions and fixed | 85 | 50 | Each |
| 86 | 86 | S&F in repair stop cock, cast copper alloy, 20mm dia. | 86 | 20 | Each |
| 87 | 87 | S&F in repair 75mm cast iron floor trap, with grating including jointing to waste pipe fixed in cement concretetype B1(1:2:4). | 87 | 70 | Each |
| 88 | 88 | Demolition and breaking up drain pipe 100/75mm bore salt glazed stone ware/AC/PVC pipe complete all as specified and directed by Engineer-in-Charge. | 88 | 405 | RM |
| 89 | 89 | S&F PVC (SWR) pipes 110mm single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed by Engineer-in-Charge. | 89 | 165 | RM |
| 90 | 90 | S&F PVC (SWR) pipes 75mm single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed by Engineer-in-Charge. | 90 | 240 | RM |
| 91 | 91 | S&F 110mm PVC (SWR) reducers | 91 | 30 | Each |
| 92 | 92 | S&F 75mm PVC (SWR) vent cowl | 92 | 25 | Each |
| 93 | 93 | S&F 110 mm PVC (SWR) junction double, (double T), equal or unequal with access door | 93 | 20 | Each |
| 94 | 94 | S&F 110 mm PVC (SWR) junction single, (Single T) equal or unequa with access door | 94 | 20 | Each |
| 95 | 95 | S&F 75 mm PVC (SWR) junction double, (double T), equal or unequal with access door | 95 | 20 | Each |
| 96 | 96 | S&F 75 mm PVC (SWR) junction single, (Single T) equal or unequa with access door | 96 | 20 | Each |
| 97 | 97 | M&L PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement | 97 | 10 | Each |
| 98 | 98 | S&F Cast iron work grade FG 150, unmachined, in brackets, gully traps, gratings, railing, frames, manhole covers, fire and soot doors, dampers, stop valve boxes, gate stops, parts of ranges, balusters and similar articles n exc 5 kg. | 98 | 75 | Kg |
| 99 | 99 | Dismantling water storage tanks of capacity exc 500 & n.exc 1000 ltrs and placing to MES store nearby.complete all as specified and directed by Engineer-in-Charge. | 99 | 15 | Each |
| 100 | 100 | S&F rotational moulded polyethylene water storage tank, double layered of 1000 litres capacity (Cylindrical vertical with closed top) in position complete all as specified and directed by Engineer-in-Charge. | 100 | 15 | Each |
| 101 | 101 | 20mm bore brass ball valve high pressure with polythene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed, complete all as specified. | 101 | 15 | Each |
| 102 | 102 | Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in soft /loose soil complete all as specified and directed. | 102 | 700 | Sqm |
| 103 | 103 | M&L for 100mm thick PCC 1:4:8 type D2 (using graded stone aggregate) as in sub base. | 103 | 700 | Sqm |
| 104 | 104 | M&L for 25mm thick Cement concrete (1:2:4), type B-1 using 20mm graded stone aggregate as in sub base complete. | 104 | 700 | Sqm |
| 105 | 105 | M&L Chequered cement concrete tiles 25cmx25cmx25mm thick with grey cement and pigment laid over & 20 mm thick screed in cement mortar (1:6) set ,jointed and pointed in grey cement mixed with pigment to match the shade of tiles complete all as specified. | 105 | 700 | Sqm |
| 106 | 106 | M&L Gunitting work for RCC work as in columns, beam, slab, perapet, chajjas etc by removing all loose concrete on the reinforcement, cleaning the surfaces with wire brushes and reinforcement with sand papers then applying apoxy paint to rusted reinforcement and S&F welded wire mesh fabric size not less than 95x95x3mm on the prepare surfaces and finally applying gunitting 30 to 40mm thick (average thickness) with pressure gun using 1 part of cement and 3 part of coarse sand incl necessary form work where even required all gunnited surface shall be brought in complete geometric figure even in the gunniting operation only complete all as specified and as directed.\nNote :- Where new or additional reinforcement is required the same shall be pair for separetaly of this schedule as above. | 106 | 25 | Sqm |
| 107 | 107 | Removal of debries/broken/demolished material at a distance exc 250 mtr and n exc 500 mtr from the site incl loading and unloading to any type of vehicles complete all as specified and as directed. | 107 | 1 | Cum |
| 108 | 108 | Bore Packing: Preparing the inside surface of core and PVC by roughening using suitable file to get better adhesion prior to packing works. Cleaning the surface by wire brushing followed water jet to remove any laitance or loose flaky particles. Providing necessary formwork for packing the bore using suitable arrangement . Applying a coat of styrene- butadiene based polymer coating using Nitobond SBR or equivalent to enhance adhesion between the packing material and other surfaces and Application of swellableSupercast SWX or equivalent at the middle of over the pipe external side and. Packing the gap using non-shrink cement polymer based grout using Conbextra GP1 or equivalent up to the surface of the bore whilst the Nitobond SBR or equivalent is in tacky state. | 108 | 26 | Each |
| 109 | 109 | Treating the Cracks, Construction Joints : Chase opening the Construction Joints by providing “ U ” groove, removing the dust and clean the designated area fill the prepared surface using Renderoc CS completely as per the manufacturer’s Instruction, following by providing chemical injection treatment in the form of pressure grouting to the cold joint by injecting cement slurry mixed with grout admixture Cebex 100 or equivalent @ 225 gms per bag of cement, in the required consistency through the pre fixed PVC nozzles in the 18 mm dia holes, fixing of PVC nozzles with Renderoc Plug and final cutting the projected nozzles and sealing off the PVC nozzles after the injection operation is over with Renderoc plug, nonshrink rapid setting mortar compound, finishing, curing etc. as per manufacturers specification and as directed. | 109 | 16 | per nozzle |
| 110 | 110 | System treatment :Providing and applying two coats of Brushbond RFX or equivalent with a fibermesh sandwiched between two layersHigh performanceAcrylic polymer modified Cementitious waterproof coating, shall contain a liquid polymer component and a Cementitious powder component, which shall be mixed as per manufacturer’s instructions and applied over prepared concrete surface strictly maintaining the coverage specified by the manufacturer. The applied material of BrushbondRFX should have 1.0mm thickness of cured coating membrane shall exhibit properties of static crack accommodation of 1mm according to ASTM-C836 or equivalent.terminating the coating at 300mm above FFL .Work shall be executed by Fosroc or equivalent Authorised applicator Strictly following the Instructions as per Fosroc or equivalent specifications. | 110 | 300 | Sqm |
| 111 | 111 | S&F in repair 19mm dia mild steel curtain rod powder coated with fixing side brackets, end cups, rings @ 10 Nos per RM and fixed with PVC rawl plugs & steel screws as in repairs complete all as specified. | 111 | 240 | RM |
| 112 | 112 | Dismantling boarding , any description, fixed in any position with nails | 112 | 72 | Sqm |
| 113 | 113 | S&F 19mm thick Block board grade 1 quality exterior grade , commerical type fixed with screw to timber frame work all as specified and directed. | 113 | 72 | Sqm |
| 114 | 114 | Providing and applying high performance anticarbonation coating of min 200 micron thickness Deckguard E2000 with 2mm static crack bridging ability, co2 diffusion resistance, chloride ion resistance. | 114 | 1668 | Sqm |
| 115 | 115 | Taking down carefully copper/aluminium point wiring from existing points (light, fan, socket or power) alongwith compete fittings such as switches ,ceiling rose, pendent holder, sketcth fitting & regulator etc including making good to the distrurbed surfaces of wall, roof and floor etc to match with the existing surfaces complete all as specified and directed by Engineer-in-Charge. | 115 | 824 | Each Point |
| 116 | 116 | Taking down carefully serviceable light fittings/ fans/ gyesers etc of any type any size from site and keeping safe custody of depositing in MES and refixing the same on completion of B/R and E/M works including making necessary connections with suitable copper wire and testing complete all as specified and directed by Engineer-in-Charge. | 116 | 102 | Each |
| 117 | 117 | Material and labour for concealed point wiring with 1.5 sqmm (nominal area) PVC insulated (FR-LSH) unsheathed copper cable multistrand conductor 1100 volts grade with colour coding and green cable used for earthing connection, controlled by one way switch drawn through and including appropriate size of non metallic concealed PVC Conduit (not less than 20 mm dia) with all accessoriese Tee, junction box including 1.5 sqmm PVC rigid (FR-LSH) insulated un shealthed copper cable multistrand conductor 1100 Volts grade for continuity earth wire connected to each point and terminated in to Sunken cast pressed steel terminal box made out of MS sheet 1.25mm thick for mounting of fittings like switch, socket and fan regulator with 3mm thick hylum laminated/bakalite white dust proof sheet cover complete all as specified and directed by Engineer-in-Charge. | 117 | ||
| 118 | 117.01 | (a) One light/ fan point controlled by one way switch | 118 | 471 | Each Point |
| 119 | 117.02 | (b) One light point controlled by two way switch | 119 | 3 | Each Point |
| 120 | 117.03 | (c) One 3/5 pin socket outlet 5 Amp outlet controlled with one switch on the independent board | 120 | 327 | Each Point |
| 121 | 118 | All as per item No 116 hereinbefore but for socket outlet 3/5 pin 15 Amps on independent board with cable size of 2.50 sqmm and earth continuity conductor cable of size 1.5 sqmm. complete all as specified and directed by Engineer-in-Charge. | 121 | 23 | Each Point |
| 122 | 119 | Supply and fixing of switch piano type 5 Amp, 230 Volt, flush button, single pole, one way complete all as specified and directed by Engineer -in-Charge, | 122 | 898 | Each |
| 123 | 120 | Supply and fixing of switch piano type 5 Amp, 230 Volt, flush button, two way complete all as specified and directed by Engineer -in-Charge, | 123 | 6 | Each |
| 124 | 121 | Supply and fixing of socket outlet 5/3 pin, 5 Amp, 2-in-one, 230 Volt flush type complete all as specified and directed by Engineer -in-Charge. | 124 | 330 | Each |
| 125 | 122 | Supply and fixing of socket outlet 3/ 5 pin, 15 Amp, 2-in-one, 230 Volt flush type complete all as specified and directed by Engineer -in-Charge. | 125 | 3 | Each |
| 126 | 123 | Supply and fixing of switch piano type 15 Amp, 230 Volt, flush button, single pole, one way complete all as specified and directed by Engineer -in-Charge, | 126 | 3 | Each |
| 127 | 124 | S & F stepped type electronic fan regulator flush type complete all as specified and directed by Engineer-in-Charge. | 127 | 107 | Each |
| 128 | 125 | S&F for ceiling rose surface bakelite 65x50mm two to three terminals complete all as specified and directed by Engineer-in-Charge. | 128 | 471 | Each |
| 129 | 126 | S&F single pole and neutral sheet metal enclosure with a two pin and earth plug and socket complete with plug top 20 amps with MCB SP 230 Volt 20 Amps complete all as specified and directed by Engineer-in-Charge. | 129 | 20 | Each |
| 130 | 127 | S & F LED Tube light self ballasted battern 1 x 20 W, 230 V , 4 feet long extruded aluminium body with PC diffuser , integral isolated driver more than 120 degree wide light CCT 6500 k complete with all accessories internally prewired and including connecting up with twin core twisted flexible copper conductor cable and tubes with suitable size .complete all as specified and directed by Engineer-in-Charge. | 130 | 225 | Each |
| 131 | 128 | S & F LED Tube light self ballasted battern 1 x 12 W, 230 V , 2 feet long extruded aluminium body with PC diffuser , integral isolated driver more than 120 degree wide light CCT 6500 k complete with all accessories internally prewired and including connecting up with twin core twisted flexible copper conductor cable and tubes with suitable size complete all as specified and directed by Engineer-in-Charge. | 131 | 100 | Each |
| 132 | 129 | M&L for rewinding of burnt fan motor of 1200/1400 mm sweep ceiling fan with super enamelled copper winding wire of suitable guage as per details of any make /model incl replacement of both ball bearing & brass bush complete all as specified and directed by Engineer-in-Charge. | 132 | 25 | Each |
| 133 | 130 | M&L for rewinding of burnt fan motor of 300/450 mm sweep exhaust fan with super enamelled copper winding wire of suitable guage as per details details of any make /model incl replacement of both ball bearing & brass bush complete all as specified and directed by Engineer-in-Charge. | 133 | 10 | Each |
| 134 | 131 | M&L for submain wiring with FRLSH PVC insulated PVC unsheathed single core multistranded copper conductor cable 1100 Volts grade four run 10 Sqmm and two run copper earth wire 6 Sq mm all drawn through & incl surface PVC conduit of suitable size (min 20 mm) medium grade complete all as specified and directed by Engineer-in-Charge. | 134 | 50 | RM |
| 135 | 132 | S & F MCCB 4 pole, 40 Amps, 415 V, 16 kA complete all as specified and directed by Engineer-in-Charge. | 135 | 20 | Each |
| 136 | 133 | S & F MCCB 4 pole, 63 Amps, 415 V, 16 kA complete all as specified and directed by Engineer-in-Charge. | 136 | 2 | Each |
| 137 | 134 | S & F MCCB 4 pole 200 Amps 36 kA Adjustable type complete all as specified and directed by Engineer-in-Charge. | 137 | 2 | Each |
| 138 | 135 | S& F fixing MCB SP 6 - 32 A, B series, 10 kA complete all as specified and directed by Engineer-in-Charge. | 138 | 30 | Each |
| 139 | 136 | Supply and fixing capacitor, capacity 3.15 mfd in replacement complete all as specified and directed by Engineer-in-Charge. | 139 | 30 | Each |
| 140 | 137 | Supply and fixing capacitor, capacity 4 mfd in replacement complete all as specified and directed by Engineer-in-Charge. | 140 | 15 | Each |
| 141 | 138 | Taking down ceiling fan 56\"/48\" /exhaust fan any sweep for servicing removing cleaning of dust, greasing of bearing oiling of all rotating parts and refixing the same and making necessary connections complete all as specified and directed by Engineer-in-Charge. | 141 | 35 | Each |
| 142 | 139 | M&L for earthing complete with galvanised steel earth plate electrode 600x600x6mm thick buried directly in ground (Earth) pit not less than 2.25 mtr deep below ground level with top edge of the plate not less than 1.5 mtr below ground level connected to galvanised earth lead wire 4.0 mm by means of galvanised steel nolts nuts, check nuts and washer, as earthing lead as shown in electric plate No- 3 of SSR-Part-1 connected to earth test point all as specified or indicated including testing on completion and necessary excavation and earth work in soft/loose soil, returning filling, disposal of surplus soil, earth pit in PCC 1:3:6 type C-1 using 20 mm graded stone aggregate, 50mm thick precast RCC slab as pit cover casting in PCC 1:2:4 type B-1 with 8mm dia deformed bars as reinfocement 15cm C/C and suitable handle for 10mm dia MS round bar including earth work , funnel, 20mm dia medium grade watering pipe, 40 mm dia GI light grade earth lead protection pipe , CI frame and cover, wire copper lugs etc mesh, charcoal and common salt in alternate layer complete all as specified and directed by Engineer-in-Charge. \nNote : (GI wire of extra length of main earthing lead beyond 7.5 Mtr will be measured and paid separately) | 142 | 7 | Each |
| 143 | 140 | Supply & install water heater (Geyser) of 50 ltrs capacity including mounting on wall & supply and connecting inlet outlet pipes to water supply pipeline incl suitable size fasteners & also associated wrks etc complete | 143 | 10 | Each |
| 144 | 141 | M&L for new generation energy saving and environment friendly long life 36 watt LED street light fitting with pressure die cast aluminium housing with high power LED as light source and lens embeded PC cover having top opening separate driver compartment with IP 65 protection and impact resistance of IK07 suitable for pole complete with all accesories including connected with twin core twisted flexible copper conductor wire of suitable size including GI bracket of 25/40 mm dia light grade pipe including fixing arrangement complete all as specified and directed by Engineer-in-Charge. | 144 | 10 | Each |
| 145 | 142 | Supply and fixing exhaust fan lowers suitable for size 300 to 450mm as required on site including making necessary connection and resizing of hole existing in wall for fixing and making good the disturbed surface complete all as specified and directed by Engineer-in-Charge. | 145 | 30 | Each |
| 146 | 143 | S & F in Replacement exhaust fan blade suitable for exhaust fan 300 to 450 mm sweep as required on site complete all as specified and directed by Engineer-in-Charge. | 146 | 10 | Each |
| 147 | 144 | Supply and lay steel water tubing 40mm GI medium grade ISI marked with all fittings laid in trenches or fixed to wall/roof etc complete all as specified and directed by Engineer-in-Charge. | 147 | 50 | RM |
| 148 | 145 | Supply and fix connected Gun metal gate valve ISI marked with iron wheel head screwed both ends for iron pipes and fixed for the sizes of 25mm including taking down of unserviceable gate valves complete all as specified and directed by Engineer-in-Charge. | 148 | 5 | Each |
| 149 | 146 | S&F Bib taps cast copper alloy chromium plated with crutch or butterfly handle screwed for iron pipe or brass ferrule & fixed for 15mm bore pipe complete all as specified and directed by Engineer-in-Charge. | 149 | 20 | Each |
| 150 | 147 | Supply and fixing metal body 450 mm sweep, 230 volts, with lowers exhaust fan BEE 3 rating star minimum, including grouting of bolts in wall for fixing of exhaust fan and cutting of wall for making hole/brick/masonry work, PVC sheathed twin core 23/.0076 copper wire for connection, complete all as specified and directed by Engineer-in-Charge. | 150 | 8 | Each |
| 151 | 148 | S&F decorative, double ball beraing, copper winding, 1200mm sweep ceiling fan 3 blade 240 Volts, 50 Hz, energy saver BEE rating 3 star minimum compelte incl making connections with copper wire, mounting hook arrangement etc.complete all as specified and directed by Engineer-in-Charge. | 151 | 10 | Each |
| 152 | 149 | S&F TPN vertical DB 8 way IP 42 Double door suitable to accomodate 3/4 pole MCCB as incommer SP/DP/TP outgoing MCB,s 8 way (Power Shell) sheet steel enclosure with deatchable gland plates for flush powder coated with Din rail removable busbar shrouded neutral link with conditonal short circuit rating of 10 kA rating. complete all as specified and directed by Engineer-in-Charge. | 152 | 3 | Each |
| 153 | 150 | Excavation in trenches in soft/loose soil not exceeding 1.5 Mtr wide and not exceeding 1.5 Mtr depth for laying of cables/poles or foundation etc and getting out in soft/ loose soil.complete all as specified and directed by Engineer-in-Charge. | 153 | 21.6 | Cum |
| 154 | 151 | Returning, filling in including spreading , levelling , watering and well ramming in layers not exceeding 25 cm as in excavated earth/soil complete all as specified and directed by Engineer-in-Charge. | 154 | 13.83 | Cum |
| 155 | 152 | Removing of surplus excavated soil to a distance not exceeding 50 Mtr from starting point and depositing where directed at a level not exceeding 1.5 Mtr above the starting point complete all as specified and directed by Engineer-in-Charge. | 155 | 7.7 | Cum |
| 156 | 153 | M&L for sand filling around cable with approved quality dry sand cushioning in trenches for protection of UG cable incuding levelling, spreading and ramming with punching down with a layer of sand 80mm thick before laying of cable and 150mm thick after laying of cable to trenches complete all as specified and directed by Engineer-in-Charge. | 156 | 6.48 | Cum |
| 157 | 154 | Supply of brick sub class'B' laid dry in trenches over the cable adjoining each other widthwise for cable protection complete all as specified and directed by Engineer-in-Charge. | 157 | 0.728 | per 1000 |
| 158 | 155 | M&L for auguring of holes in true horizontal position under road/ hard standing by means of mechanical rig after doing ultrasound to prevent any damage to existing cable/pipe line coming in route 1.5 Mtr deep and not exceeding 50 Mtrs long incl laying HDPE pipe not less than 150mm dia complete all as specified and directed by Engineer-in-Charge. | 158 | 15 | RM |
| 159 | 156 | Supplying, laying, jointing and testing cable XLPE insulated IS 7098 (Part-I)-1988 marked, screened, PVC sheathed, armoured electric power cable (heavy duty) with aluminum conductor for working voltage upto and including 1100 Volts, cross sectional area of cable 90 sq mm 3.5 core laid in trenches/fixed on pole/wall / passed through pipe complete all as specified and directed by Engineer-in-Charge. | 159 | 80 | RM |
| 160 | 157 | Net Contract Sum will be after deducting Sch of Credit of Rs 3,88,530.00 | 160 |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
