| 1 | 1 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. | | 435 | Sqm |
|---|
| 2 | 2 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. | | 0.594 | Cum |
|---|
| 3 | 3 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :Of area 3 sq. metres and below | | 42 | Sqm |
|---|
| 4 | 4 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.In cement mortar | | 2 | Cum |
|---|
| 5 | 5 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:Cement mortar 1:6 (1 cement : 6 coarse sand) | | 2 | Cum |
|---|
| 6 | 6 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :Cement mortar 1:6 (1 cement : 6 coarse sand) | | 2 | Cum |
|---|
| 7 | 7 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and plinth in.Cement mortar 1:4 (1 cement :4 coarse sand) | | 3 | Sqm |
|---|
| 8 | 8 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level.Cement mortar 1:3 (1 cement :3 coarse sand) | | 3 | Sqm |
|---|
| 9 | 10 | 12 mm cement plaster of mix :1:6 (1 cement : 6 fine sand) | | 320 | Sqm |
|---|
| 10 | 11 | 6 mm cement plaster of mix :1:3 (1 cement : 3 fine sand) | | 120 | Sqm |
|---|
| 11 | 12 | 12 mm cement plaster finished with a floating coat of neat cement of mix 1:4 (1 cement : 4 fine sand): | | 16 | Sqm |
|---|
| 12 | 13 | Providing, hoisting and fixing up to floor five level precast reinforced cement concrete work in string courses, bands, copings, bed plates, anchor blocks, plain window sills and the like including the cost of required centering, shuttering but excluding cost of reinforcement, with 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20mm nominal size). | | 1.4175 | Cum |
|---|
| 13 | 14 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level excluding the cost of centring, shuttering, finishing and reinforcement with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size). | | 0.594 | Cum |
|---|
| 14 | 15 | Centring and shuttering including strutting, propping etc. and removal of form for :Suspended floors, roofs, landings, balconies and access platform. | | 10.5 | Sqm |
|---|
| 15 | 16 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Thermo-Mechanically Treated bars. | | 140.805 | Kg |
|---|
| 16 | 17 | Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand) including pointing the joints with white cement and matching pigment etc., complete. | | 46.6 | Sqm |
|---|
| 17 | 18 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. | | 132.36 | Sqm |
|---|
| 18 | 19 | Providing and fixing factory made P.V.C. door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos. of 150mm long brackets of 15x15mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100mm size, complete as per manufacturers specification and direction of Engineer-in-Charge. | | 73.76 | Mtr |
|---|
| 19 | 20 | Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mm for styles and 15x15mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture . M.S. frame covered with 5mm thick heat moulded PVC 'C' channel of size 30mm thickness, 70mm width out of which 50mm shall be flat and 20mm shall be tapered in 45degree angle on both side forming styles; and 5mm thick, 95mm wide PVC sheet out of which 75mm shall be flat and 20mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115mm wide PVC sheet out of which 75mm shall be flat and 20mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10mm (5mm x 2 ) thick, 20mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail. paneling of 5mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7mm (5mm+2mm) thick x 15mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge. Manufacturer’s specification & drawing.30 mm thick plain PVC door shutters. | | 19.76 | Sqm |
|---|
| 20 | 21 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour.450MM long towel rail with total length of 495mm, 78mm wide and effective height of 88mm, weighing not less than 170gms. | | 8 | Each |
|---|
| 21 | 22 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931,15 mm nominal bore. | | 8 | Each |
|---|
| 22 | 23 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 15 mm nominal bore. | | 8 | Each |
|---|
| 23 | 24 | Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6mm angle iron and 3mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.Using flats 30x6mm for diagonal braces and central cross piece. | | 15.84 | Sqm |
|---|
| 24 | 25 | Providing and fixing white vitreous china water closet squatting pan (Indian type),Long pattern W.C. pan of size 580 mm | | 8 | Each |
|---|
| 25 | 26 | Providing and fixing a pair of white vitreous china foot rests of standard pattern for squatting pan water closet:250x130x30 mm | | 8 | Pair |
|---|
| 26 | 27 | Providing and fixing on wall face Unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. (i) Single socketed pipes,75 mm diameter | | 15 | Mtr |
|---|
| 27 | 30 | Providing and fixing Unplasticised -PVC pipe clips of approved design to Unplasticised - PVC rain water pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.75 mm | | 15 | Each |
|---|
| 28 | 32 | Providing and fixing on wall face Unplasticised - PVC moulded fittings/ accessories for Unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.Bend 87.5°,75 mm bend | | 5 | Each |
|---|
| 29 | 33 | Providing and fixing ISI marked M.S. pressed butt hinges bright finished with necessary screws etc. complete :100x58x1.90 mm | | 60 | Each |
|---|
| 30 | 34 | Providing and fixing ISI marked M.S. pressed butt hinges bright finished with necessary screws etc. complete :75x47x1.70 mm | | 48 | Each |
|---|
| 31 | 35 | Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete :150x10 mm | | 20 | Each |
|---|
| 32 | 36 | Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete :100x10 mm | | 32 | Each |
|---|
| 33 | 37 | Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete :100 mm | | 20 | Each |
|---|
| 34 | 38 | Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete :75 mm | | 24 | Each |
|---|
| 35 | 39 | Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete :250x16 mm | | 8 | Each |
|---|
| 36 | 40 | Providing and fixing 18mm thick gang saw cut mirror polished (premoulded and prepolished) machine cut for kitchen platforms, vanity counters ,window sills , facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing moulding and polishing to edge to give high gloss finish etc. complete at all levels.Raj Nagar Plain white marble/ Udaipur green marble/ Zebra black marble.Area of slab over 0.50 sqm. | | 7.2 | Sqm |
|---|
| 37 | 41 | Neat cement punning | | 12 | Sqm |
|---|
| 38 | 42 | Supplying, fitting, Fixing Fly/Mosquito proof nylon net on any type of window , door shutter/frame with necessary fixing arrangements complete. | | 15.36 | Sqm |
|---|
| 39 | 43 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. | | 8 | Each |
|---|
| 40 | 44 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete | | 1625 | Sqm |
|---|
| 41 | 45 | Applying priming coat :With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) | | 89.336 | Sqm |
|---|
| 42 | 46 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :One or more coats on old work. | | 155.814 | Sqm |
|---|
| 43 | 47 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two or more coats on new work | | 124.186 | Sqm |
|---|
| 44 | 48 | Finishing walls with water proofing cement paint of required shade :Old work (one or more coats applied @ 2.20 kg/10 sqm) over priming coat of primer applied @ 0.80 litrs/10 sqm complete including cost of Priming coat. | | 900 | Sqm |
|---|
| 45 | 49 | Colour washing with any shade with Stainers, as required including cleaning and smoothening surface thoroughly :Internal surface (All floors), One coat of colour wash, Other than yellow, pink. | | 1160 | %Sqm |
|---|
| 46 | 50 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required :Kitchen sink without drain board,470x420 mm bowl depth 178 mm. | | 8 | Each |
|---|
| 47 | 51 | Lettering with black Japan paint of approved brand and manufacture | | 800 | Cm |
|---|
| 48 | 52 | Artificial stone in floor, dado, staircase etc with cement concrete (1:2:4) with stone chips, laid in panels as directed with topping made with ordinary or white cement (as necessary) and marble dust in proportion (1:2) including smooth finishing and rounding off corners including raking out joints or roughening of concrete surface and application of cement slurry before flooring works using\ncement @ 1.75 kg/Sq.M all complete including all materials and labour.In ground floor.3 mm. thick topping (High polishing grinding on this item is not permitted with ordinary cement).Using grey cement,25 mm. thick | | 120 | Sqm |
|---|
| 49 | 53 | Wood work in door and window frame with rebate cutting, fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame exluding cost of concrete, Iron Butt Hinges and M.S clamps. (The quantum should be correted upto three decimals),Other Local Wood. | | 0.6216 | Cum |
|---|
| 50 | 54 | Supplying, fitting and fixing M.S. clamps for door and window frame made of flat bent bar, end bifurcated with necessary screws etc. by cement concrete(1:2:4) as per direction. (Cost of concrete will be paid separately),40mmx6mmx125mm length | | 112 | Each |
|---|
| 51 | 55 | Z-batten shutters of door and window as per design havings tongued and groovehalf lap jointed as per direction of the Engineer-in-Charge including fitting and fixing shutter in position, but excluding the cost of hinges and other fittings in ground floor.Shutter with 19mm thick planks, 19mm thick battens.Other Local Wood | | 27.07 | Sqm |
|---|
| 52 | 56 | Supplying,fitting and fixing cast iron 'P' or 'S' trap conformimg to I.S. 3989/ 2009 and 1729/ 2002 including lead caulked joints and painting two coats to the exposed surface. (Painting to be paid seperately).P' Trap,75 mm | | 8 | Each |
|---|
| 53 | 57 | Demolishing cement concrete manually/ by mechanical means\nincluding disposal of material within 50 metres lead as per direction of Engineer - in - charge.Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) | | 3 | Cum |
|---|
| 54 | 59 | Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required. | | 8 | Each |
|---|
| 55 | 60 | Wiring for circuit/ submain wiring along with earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required,2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire | | 72 | Mtr |
|---|
| 56 | 61 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc as required.Group A | | 80 | Point |
|---|
| 57 | 62 | Supplying and fixing following piano type switch/ socket on the\nexisting switch box/ cover including connections etc. as required,3 pin 5/6 amp socket outlet | | 16 | Each |
|---|
| 58 | 63 | Supplying and fixing exhaust fan 225mm dia cromption/equivalent make | | 8 | Each |
|---|
| 59 | 64 | Total impact of GST for the purpose of CTC | BI01010001010000000000000515BI0100001189 | 1 | Nos |
|---|
