Sales : +91-777 804 8217
| Name of Work: Construction of Warehouse for the storage of Electronic Voting Machines and VVPATs at Bhiuli, Tehsil & District Mandi (H.P.) (Sub Head:- Site Development, construction of building portion, water supply and sanitary installation, Septic tank, rain water harvesting tank etc.) | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Cutting in earth work in all heights and depths in all kinds of clasification of soil including saturated soil comprising of pick, jumper and blasting work both in soft and hard rock with chiseling wedging out of rock (where blasting is prohibited) and their intermediate classification of soil setting out time to the required line, side slopes trimming bottoms and level as shown in the drawing as per the direction of Engineer-in-Charge at site and sorting out useful/un-useful materials and stacking the same in all leads and lifts and transportation of un-useful materials to required width or on approved dumping sites through all modes of transportation including head load or animal transport or mechanical means along with its levelling fine dressing and carriage of all labour machineries, materials, tools equipments and safety measures and incidentals necessary to complete the work by mechanized means and or labour if required all useful materials such as stones, shingles, aggregates, sand slates shall be sorted out and stacked along site of work. Any loss to the public/private property during the course of execution shall be absolute responsibility of the contractor which shall be duly compensated by him in all cases. | BI01010001010000000000000515BI0100001113 | 3744 | Per cubic metre |
| 2 | 2 | Excavation in foundation, trenches, etcetera in earth work in all kinds of classification, of soils such as pick work, jumper work, blasting work saturated soils including chiseling or any other mixed variety of soils, dewatering and / or removal of slush and other incidentals, lift up to any height stacking excavated soil up to all leads and lifts clear from the edge of excavation and then returning the stacked soil in 15cm (fifteen centimetre) thick layer when required into plinths, sides of foundation etcetera consolidating each deposited layers by ramming and watering and then disposing of all surplus excavated earth to the disposal point within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. | BI01010001010000000000000515BI0100001114 | 845.62 | Per cubic metre |
| 3 | 3 | Excavation in drains channles etcetra in earth work in all kind of soil, such as pick work, jumper work, pick jumper work, blasting work, hard and soft blasting, saturated soil including chiseling or any other mixed variety of soil, lift up to any heights, stacking the excavated soil for all heights from the edge of excavation and then returning the stacked soil in 15cm (Fifteen centimeter) layer when required into plinths sides of foundations etcetra consolidating each deposited layer by ramming, watering and then disposing of all surplus excavated earth as directed by the Engineer-in-charge, within all leads, lifts of materials and other incidentals. | 3.44 | Per cubic metre | |
| 4 | 4 | Providing form work with steel plates 3.15mm (three point one five millimetre) thick welded with angle iron in frame 30x30x5mm (thirty into thirty into five millimetre) so as to give a fair finish including centering, shuttering, strutting and propping etcetera with wooden battens and ballies for all heights of propping and centering below supporting floor to ceiling upto all height and removal of the same for in-situ reinforced concrete and plain concrete work in : | |||
| 5 | 4.01 | Foundation, footings, bases of columns etcetera and mass concrete including carriage of materials within all leads and lifts and other incidentals complete in all respect as per direction and satisfaction of Engineer-in-Charge. | 84.8 | Per square metre | |
| 6 | 4.02 | Flat surface such as soffits of suspended floors, roofs, landings and the like upto any thickness including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. | 935.58 | Per square metre | |
| 7 | 4.03 | Vertical surfaces such as walls (any thickness) partitions and the like including attached pillasters, buttresses, plinth and string courses and the like including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. | 1442.58 | Per square metre | |
| 8 | 4.04 | Columns, pillars, posts and struts square, rectangular or polygonal in plan including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. | 817.02 | Per square metre | |
| 9 | 4.05 | Stair cases with slopping or stepped soffits, excluding landing but including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. | 84.55 | Per square metre | |
| 10 | 4.06 | Beam, cantilever, girders and lintels, sides and soffits of beams beam haunching cantilevers girders bressumers and lintels of any depth including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. | 1250.12 | Per square metre | |
| 11 | 4.07 | Edges of slabs and breaks in floors and walls of any width including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. | 115.6 | Per running metre | |
| 12 | 5 | Providing and laying cement concrete 1:3:6 ( one cement : three sand : six graded, crushed stone aggregate 40mm (forty millimetre) nominal size) mechanically mixed and curing complete excluding cost of form work in foundation and plinth including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. | 1.51 | Per cubic metre | |
| 13 | 6 | Providing and laying cement concrete 1:4:8 ( one cement : four sand : eight graded, crushed stone aggregate 40mm (forty millimetre) nominal size) mechanically mixed and curing complete excluding cost of form work in foundation and plinth including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. | 18.17 | Per cubic metre | |
| 14 | 7 | Providing and laying cement concrete 1:4:8 ( one cement : four sand : eight graded, crushed stone aggregate 25mm (twenty five millimetre) nominal size) mechanically mixed and curing complete excluding cost of form work in foundation and plinth including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. | 550.8 | Per cubic metre | |
| 15 | 8 | Providing and laying cement concrete 1:6:12 ( one cement : six sand : twelve graded, crushed stone aggregate 40mm (forty millimetre) nominal size) and curing complete excluding cost of centring and shuttering in foundation and plinth including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. | 77.65 | Per cubic metre | |
| 16 | 9 | Providing and laying design mix M-20 (twenty) grade of cement concrete mechanically mixed and vibrated with minimum cement contents of 320 Kg/cum (three hundred twenty kilogram per cubic metre) with graded, crushed stone aggregate 20mm (twenty millimetre) nominal size and curing complete excluding cost of form work and reinforcement for reinforced concrete work in: | |||
| 17 | 9.01 | Walls any thickness but not less than 0.10mtrs. (zero point one zero metre) thickness including attached pilasters, buttresses plinth and string courses upto any depth /any height including curing complete and carriage of material within all leads, lifts and other incidental charges complete in all respect as per direction and satisfaction of Engineer-in-Charge. | 13.83 | Per cubic metre | |
| 18 | 9.02 | Suspended floor, roofs, landing and shelves and their support balconies beams girders, bressumers and cantilevers upto all floor level including carriage of material within all leads, lifts and other incidental charges complete in all respect as per direction and satisfaction of Engineer-in-Charge. | 2.44 | Per cubic metre | |
| 19 | 10 | Providing and laying reinforced cement concrete design mix M-25 (twenty five) grade mechanically mixed and vibrated and curing complete excluding cost of form work and reinforcement for reinforced concrete work. The mix shall be designed as per requirement of I.S. code and P.W.D. specification. The dedign mix shall be got approved from the Engineer-in-Charge prior to casting. The theoritical consumption of cement for the item shall be worked out as per approved design mix as per I.S. code. | |||
| 20 | 10.01 | Foundation footing, bases of columns and the like mass concrete upto floor all level including carriage of material within all leads, lifts and other incidental charges complete in all respect as per direction and satisfaction of Engineer-in-Charge. | 61.35 | Per cubic metre | |
| 21 | 10.02 | Suspended floor, roofs, landing and shelves and their support balconies beams girders, bressumers and cantilevers upto all floor level including carriage of material within all leads, lifts and other incidental charges complete in all respect as per direction and satisfaction of Engineer-in-Charge. | 349.34 | Per cubic metre | |
| 22 | 10.03 | Stair cases (except spiral stair cases) excluding landing but including preparing of the surface and finishing of nosing upto all floor level including carriage of material within all leads, lifts and other incidental charges complete in all respect as per direction and satisfaction of Engineer-in-Charge. | 8.72 | Per cubic metre | |
| 23 | 10.04 | Walls any thickness but not less than 0.10mtrs. (zero point one zero metre) thickness including attached pilasters, buttresses plinth and string courses upto any depth /any height including curing complete and carriage of material within all leads, lifts and other incidental charges complete in all respect as per direction and satisfaction of Engineer-in-Charge. | 50.41 | Per cubic metre | |
| 24 | 11 | Providing and laying reinforced cement concrete design mix M-30 (thirty) grade mechanically mixed and vibrated and curing complete excluding cost of form work and reinforcement for reinforced concrete work. The mix shall be designed as per requirement of I.S. code and P.W.D. specification. The dedign mix shall be got approved from the Engineer-in-Charge prior to casting. The theoritical consumption of cement for the item shall be worked out as per approved design mix as per I.S. code in: | |||
| 25 | 11.01 | Columns, pillars posts and struts upto floor all level including carriage of material within all leads, lifts and other incidental charges complete in all respect as per direction and satisfaction of Engineer-in-Charge. | 81.61 | Per cubic metre | |
| 26 | 12 | Providing and laying mechanically mixed and vibrated cement concrete 1:1.5:3 ( one cement : one & half sand : three graded, crushed stone aggregate 20mm (twenty millimetre) nominal size) to and curing complete excluding cost of form work and reinforcement for reinforced concrete work in: | |||
| 27 | 12.01 | Foundation footing, bases of columns and the like mass concrete upto floor all level including carriage of material within all leads, lifts and other incidental charges complete in all respect as per direction and satisfaction of Engineer-in-Charge. | 36 | Per cubic metre | |
| 28 | 12.02 | Walls any thickness but not less than 0.10mtrs. (zero point one zero metre) thickness including attached pilasters, buttresses plinth and string courses upto any depth /any height including curing complete and carriage of material within all leads, lifts and other incidental charges complete in all respect as per direction and satisfaction of Engineer-in-Charge. | 85.51 | Per cubic metre | |
| 29 | 13 | Providing Tor steel reinforcement for RCC work including bending binding and placing in position including cost of binding wire complete in all floors including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. | 98560.1 | Per Kilogram | |
| 30 | 14 | Second class brick work using common burnt clay building bricks of approved kiln in foundation and plinth in cement mortar 1:6 (one cement : six sand) including curing complete and carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. | 78.82 | Per cubic metre | |
| 31 | 15 | Second class half brick masonry in common burnt clay building bricks of approved kiln in super structure above plinth level upto floor all level in cement mortar 1:4 (one cement : four sand) and curing complete and carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. | 205.66 | Per square metre | |
| 32 | 16 | Second class brick work using common burnt clay building bricks of approved kiln with rat trap bond in super structure upto all height and depth in cement mortar 1:6 (one cement : six sand) including curing complete and carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. | 166.02 | Per cubic metre | |
| 33 | 17 | Second class brick work using common burnt clay building bricks of approved kiln in foundation and plinth in mud mortar including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. | 0.18 | Per cubic metre | |
| 34 | 18 | Square rubble masonry coursed with hard stone of approved quality in foundation and plinth in retaining wall/ breast wall including racking out joints in cement mortar 1:6 (one cement : six sand) and curing complete including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. | 120 | Per cubic metre | |
| 35 | 19 | Square rubble masonry coursed with hard stone of approved quality in foundation and plinth including racking out joints in cement mortar 1:6 (one cement : six sand) and curing complete including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. | 10.48 | Per cubic metre | |
| 36 | 20 | Providing weep hole in brick masonry/ stone masonry / plain reinforced concrete abutment , wing wall, return wall with 100mm dia.(one hundred millimetre diametre) PVC pipe extending through the full width of the structures with slope of 1V:20H (one vertical isto twenty horizontal) towards drawing face complete as per drawing and technical specifications clauses 614,709,1204.3.7 including carriage of material and otherother incidentals as per direction of Engineer-in-Charge. | 80 | Each | |
| 37 | 21 | Providing and fixing 12mm (twelve millimetre) thick prelaminated board both side bwp phenol bounded exterior/interior grade panelled shutters with 40mm (forty millimetre) thick frame styles and rails of first class deodar wood for doors including bright finished/black enameled iron butt hings with necessary screws as per architectural drawing and approved specification including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. | 64.53 | Per square metre | |
| 38 | 22 | Providing and fixing 40mm (forty millimeter) thick second class deodar wood wire gauge shutters using galvanized M.S. wire gauge of IS gauge designation 85g (eighty five) gauge with wire of diameter 0.56mm (zero point five six millimeter) for doors, windows and clerestore windows including bright finished black enamelled iron hinges with necessary screws including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. | 124.95 | Per square metre | |
| 39 | 23 | Providing and fixing 19mm (nineteen millimetre) thick water proof commercial board in shelves/box for cup board with butt joints & fixing with nails and screw etcetera including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. | 6.84 | Per square metre | |
| 40 | 24 | Providing and fixing M.S. plain grills of required pattern in wooden frames of windows etcetra with M.S. flats, square or round bars with round headed bolts and nuts or by screws plain grill complete in all respect including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. | 1325.93 | Per kilogram | |
| 41 | 25 | Providing and fixing anodized aluminium sliding door bolt anodized colour and shade with bolts and nuts screws etcetera including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. | |||
| 42 | 25.01 | 300x16mm (Three hundred into sixteen millimeter) | 10 | Each | |
| 43 | 25.02 | 250x16mm (Two hundred fifty into sixteen millimeter) | 14 | Each | |
| 44 | 26 | Providing and fixing aluminium tower bolts (Barrel type) anodized transparent or dyed to required shade and colour with screws etcetera including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. | |||
| 45 | 26.01 | 200x10mm (Two hundred into ten millimeter) | 20 | Each | |
| 46 | 26.02 | 150x10mm (One hundred fifty into ten millimeter) | 28 | Each | |
| 47 | 27 | Providing and fixing mat finish aluminium handles anodized transparent or dyed to required shade and colour with necessary screws etcetera including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. | |||
| 48 | 27.01 | 125mm (One hundred twenty five millimetre) | 40 | Each | |
| 49 | 27.02 | 100mm (One hundred millimetre) | 56 | Each | |
| 50 | 28 | Providing and fixing 150mm (one hundred fifty millimetre) oxidized MS hasps and stapples (safety type) with necessary screws etcetera including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. | 4 | Each | |
| 51 | 29 | Providing and fixing Helical door spring 150mm (one hundred fifty millimetre) bright finished or/ and black enamelled iron including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. | 10 | Each | |
| 52 | 30 | Providing and fixing 6mm (six millimetre) thick commercial ply wood ceiling of approved quality with butt jointing and nails (frame work and cover fillets to be paid for separately) including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. | 28.84 | Per square metre | |
| 53 | 31 | 40mm (forty millimeter) thick cement concrete flooring 1:2:4 (one cement : two sand : four graded, crushed stone aggregate 20mm (twenty millimeter) nominal size) laid in one layer finished with a floating coat of neat cement including curing, carriage of material within all leads, lifts and other incidental charges complete in all respect as per direction and satisfaction of Engineer-in-Charge. | 1.8 | Per square metre | |
| 54 | 32 | Providing and laying 25mm (twenty five millimetre) thick Kota stone slab flooring 20mm (twenty millimetre) (average) thick base of cement mortar 1:4 (one cement : four sand) laid over and jointed with gray cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete as per specification in all floors including carriage of material within all leads, lifts and other incidental charges complete in all respect as per direction and satisfaction of Engineer-in-Charge. | 753.61 | Per square metre | |
| 55 | 33 | Providing and laying Kota stone slab 25mm (twenty five millimetre) thick in risers of steps, skirting dado and pillars laid on 12mm (twelve millimetre) (average) thick cement mortar 1:3 (one cement : three sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs including rubbing and polishing complete as per specification in all floors including carriage of material within all leads, lifts and other incidental charges complete in all respect as per direction and satisfaction of Engineer-in-Charge. | 81.72 | Per square metre | |
| 56 | 34 | Providing and laying granite stone in flooring 20mm (twenty millimetre) (average) thicknees base of cement mortar 1:3 (one cement : three sand) laid over and jointed with grey cement slury mixed with pigment to match the shade of granite stone including rubbing and polishing complete 20mm (twenty millimetre) thick in all floors including curing and carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. | 180 | Per square metre | |
| 57 | 35 | Providing and laying spartic ceramic tiles 5.5mm ( five point five millimetre) thick in flooring, treads of steps and landing 300x300mm ( three hundred into three hundred millimetre) size laid on a bed of 12mm ( twelve millimetre) thick cement mortar 1:3 ( one cement : three sand) jointed with cement slurry mixed with pigment to match the shade of tile complete as per specification, direction and satisfaction of Engineer-in-charge including carriage of materials within all leads and lifts complete in all respect. | 29.09 | Per square metre | |
| 58 | 36 | White glazed tiles 6mm (six millimetre) thick in skirting riser of steps and dado 12mm (twelve millimetre) thick cement mortar 1:3 (one cement : three sand) and jointed with cement slurry complete upto all floor level in all respect including carriage of materials within all leads and lifts complete in all respect. | 150.42 | Per square metre | |
| 59 | 37 | Providing and laying red sand stone slab flooring 40mm (forty millimetre) average thick on 20mm (twenty millimetre) average thick base of cement mortar 1:4 ( one cement : four sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and granite polish finish complete as per specification including carriage of material within all leads, lifts and other incidental charges complete in all respect as per direction and satisfaction of Engineer-in-Charge. | 22.71 | Per square metre | |
| 60 | 38 | Providing and fixing 12mm (twelve millimetre) Glass reinforced concrete cladding of approved shade and texture of unistone or its equivalant made from portland cement alkally resistance glass fibre, UV resistant synthetic inorganic pigment combined with the range of chemical addivities on exterior surface side as on faces of arch masonry walls etcetera on 12mm (twelve millimetre) thick cement plaster 1:3 (one cement : three sand) and jointed with cement slurry including scafflolding etcetera complete as per specification including carriage of material within all leads, lifts and other incidental charges complete in all respect as per direction and satisfaction of Engineer-in-Charge. | 1000.27 | Per square metre | |
| 61 | 39 | Providing and fixing 0.60mm (zero point six zero millimetre) thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 (twenty) microns over 5 (five) microns primer coating to back coat of polyster 5 (five) microns over 5 (five) microns primer coating including fixing with screws prepainted iron J or L hooks, bolts and nuts 6mm (six millimetre) diametre with prepainted limpet and rubber washers complete with all accesoriees as required as per the direction of Engineer-in-Charge complete as per specification including carriage of material within all leads, lifts and other incidental charges. | 616.46 | Per square metre | |
| 62 | 40 | Providing and fixing ridges or hips 60cm (sixty centimetre) overall with 0.60mm (zero point six zero millimetre) thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheets with top coat of regular modified polyster organic coating of 20 (twenty) microns over 5 (five) microns primer coating plus back coat of polyster of 5 (five) microns over 5 (five) microns primer coating including fixing with screws prepainted iron J or L hooks, bolts and nuts 6mm (six millimetre) diametre with prepainted GI limpet and bitumen washers complete with all accesoriees as required as per the direction of Engineer-in-Charge including carriage of material within all leads, lifts and other incidental charges. | 63.02 | Per running metre | |
| 63 | 41 | Providing and fixing valley 90cm (ninety centimetre) overall with 0.60mm (zero point six zero millimetre) thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster organic coating of back coat of polyster 5 (five) microns over 5 (five) microns primer coating including fixing with screws prepainted iron J or L hooks, bolts and nuts 6mm (six millimetre) diametre with prepainted GI limpet and bitumen washers complete with all accesoriees as required as per the direction of Engineer-in-Charge including carriage of material within all leads, lifts and other incidental charges. | 35.96 | Per running metre | |
| 64 | 42 | Providing and fixing MS BP sheet 1.66mm to 2mm (one point six six millimetre to two millimetre) thick in eaves board/facia/soffits/ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-Charge (Base members of steel work shall be measured & paid seprately) including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. | 58.32 | Per square metre | |
| 65 | 43 | Steel work welded in built up sections, trusses and framed work including cutting, hoisting fixing in position and applying a priming coat of red lead paint:- | |||
| 66 | 43.01 | In beams, joists, channels, angles, tees, flats with connecting plates or angle cleats in main and cross beams, hip and jack rafters, purlins connected to common rafters and the like complete as per design including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. | 190.77 | Per quintal | |
| 67 | 44 | Providing and fixing moulded hand rail of M.S. hollow pipe 50mm (fifty millimetre) diametre welded in straight length over M.S. flat at top of vertical ballusters including one coat of red oxide priming coat complete (M.S. flat & ballusters of railing shall be measured & paid separately ) as per specifications and design including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. | 59 | Per running metre | |
| 68 | 45 | Providing and fixing channel section in frames of windows and ventilators manufactured from MS channel section 75x40mm (seventy five into forty millimetre) joints mitred and welded complete including hinges jamb lock, jamb beeds etcetera and if required angle thrashold of mild steel angle 50x5mm (fifty into five millimetre) welded or rigidly fixed by machanical means, lugs with split end tails to each jambs including steel butt hinges 2.5mm (two point five millimetre) thick with provision for locking arrangement and shock observer as specified and applying a coat of approved steel primer after pre treatment of the surface as directed by Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental charges complete in all respect. | 476.1 | Per running metre | |
| 69 | 46 | Providing and fixing steel glazed doors, windows, and ventilators of standard rolled steel Channel section 75x40mm (Seventy five into forty millimetre) with M.S. flat 75x4mm (seventy five into four millimetre) in combination welded together and standard Z-section style of standard size with sash bars, T-section and welded with (Manufactured to relevant I.S. standard specifications) 16x3.15mm (Sixteen into three point one five millimetre)lugs 10cm (ten centimetre) long embedded in cement concrete blocks 15x10x10cm (fifteen into ten into ten centimetre)size of 1:3:6 (One cement :three sand :six graded, crushed crushed stone aggregate 20mm (twenty millimetre) nominal size) with wooden plugs and screws or rawl plug and screws or with fixing clips or with bolts and nuts as required and iron fittings,including providing and fixing of projecting hinges, handles pegstays bolting device locking arrangement spring catch etcetra and providing and fixing of 4mm (four millimetre) thick glass panes with glazing clips and special metal sash putty of approved make complete as per approved specification and design including applying a priming coat of red lead paint and carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. | |||
| 70 | 46.01 | Fixed steel windows. | 21.09 | Per square metre | |
| 71 | 46.02 | Side hung window. | 42.41 | Per square metre | |
| 72 | 46.03 | Top hung ventilator. | 12.06 | Per square metre | |
| 73 | 47 | Painting two coats (excluding priming coat) on new steel and other metal surface under coat with ready mixed paint brushing to give an even shade including cleaning the surface of all dirt, dust and other foreign matter with ready mixed paint other than white including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. | 173.31 | Per square metre | |
| 74 | 48 | Applying priming coat over new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter sand papering and knotting. Ready mixed paint brushing wood primer pink including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. | 288.11 | Per square metre | |
| 75 | 49 | Painting two coats (excluding priming coat) on new wood and wood based surfaces with ready mixed paint brushing to give an even shade including cleaning the surface of all dirt, dust and other foreign matters sand papering and stopping. Ready mixed paint other than white including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge.\n\n | 288.11 | Per square metre | |
| 76 | 50 | Wall painting (two coats) with plastic emulsion paint of approved brand and manufacture on undecorated wall surfaces to give an even shade including thoroughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth including applying of putty a required for making the surface including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. | 169.28 | Per square metre | |
| 77 | 51 | Finishing wall with water proofing cement paint of approved brand and manufacture and of required shade on undecorated wall surfaces (two coats) to give an even shade after throughly brushing the surface to remove all dirt loose powdered materials including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. | 1000.27 | Per square metre | |
| 78 | 52 | Distempering (two coats) with oil bound washable distemper of approved brand and manufacture and of required shade on undecorated wall surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after throughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand papered smooth priming coat with distemper primer including carriage of material with in all leads, lifts and other incidentals complete in all respect. | 3003.66 | Per square metre | |
| 79 | 53 | 6mm (six millimeter) thick cement plaster to ceiling with cement mortar 1:4 (one cement : four sand) including curing and carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. | 712.45 | Per square metre | |
| 80 | 54 | 15mm (fifteen millimetre) cement plaster in single coat on the rough side of brick/concrete/stone walls for interior plastering upto floor all level including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm (eighty millimetre) in girth and finished even and smooth in cement mortar 1:6 (one cement : six sand) including curing and carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. | 2850.4 | Per square metre | |
| 81 | 55 | 20mm (twenty millimetre) cement plaster in single coat on the rough side of brick/concrete/stone walls for interior plastering upto floor all level including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm (eighty millimetre) in girth and finished even and smooth in cement mortar 1:4 (one cement : four sand) including curing and carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. | 15.78 | Per square metre | |
| 82 | 56 | Providing plinth protection 50mm (fifty millimeter) thick in cement concrete 1:3:6 (one cement : three sand : six graded, crushed crushed stone aggregate 20mm (twenty millimetre) nominal size including finishing the top surface of concrete smooth including curing complete and carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. | 72.24 | Per square metre | |
| 83 | 57 | Providing under layer for plinth protection of 75mm (seventy five millimetre) thick (unconsolidated) bed of dry brick/stone aggregate 40mm (forty millimetre) nominal size well rammed and consolidated and grouted with fine sand including preparation of ground including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. | 72.24 | Per square metre | |
| 84 | 58 | Constructing course rubble hammer dressed U-Shape open surface drain with side wall 15x22cm (fifteen into twenty two centimetre) in cement mortar 1:6 (one cement : six sand) and inside plastering with cement plaster 1:3 (one cement : three sand) including earth work and laying 10cm (ten centimetre) cement concrete in 1:5:10 (one cement : five sand : ten graded, crushed stone aggregate of 40mm (forty millimetre) nominal size) and 7.5cm (seven point five centimetre) cement concrete 1:2:4 (one cement : two sand : four graded, crushed stone aggregate of 20mm (twenty millimetre nominal size) and finished with a floating coat of neat cement complete as per standard design including curing and carriage of material with in all leads, lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. | 116.4 | Per running metre | |
| 85 | 59 | Supplying and laying brick aggregate 50mm (fifty millimetre) nominal size carriage of material with in all leads, lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. | 1.83 | Per cubic metre | |
| 86 | 60 | Providing and fixing to wall, ceiling and floor galvanized mild steel tubes (heavy grade) tube fitting and clamps including making good the walls, ceiling and floor complete in all respect including carriage of material with in all leads, lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. | |||
| 87 | 60.01 | 20mm (twenty millimeter nominal bore) | 36 | Per running metre | |
| 88 | 60.02 | 15mm (fifteen millimeter nominal bore) | 66 | Per running metre | |
| 89 | 61 | Providing and laying 20mm (twenty millimetre) nominal bore in trenches galvanized mild steel tube (heavy grade) tube fitting (earth work in trenches to be measured and paid for separately) complete in all respect including carriage of material with in all leads, lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. | 30 | Per running metre | |
| 90 | 62 | Making connection of galvanized steel distribution branch with galvanized mild steel main 20mm to 40mm (twenty millimetre to forty millimeter) nominal bore by providing and fixing tee including cutting and threading the pipes complete in all respect carriage of material with in all leads, lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. | 4 | Each | |
| 91 | 63 | Fixing water metre stop cock in 20mm (twenty millimetre) nominal bore galvanized mild steel tube including necessary fittings such as mild steel galvanized jam nut, sockets etcetera cutting and making long screws complete in all respect ( water metre and stop cock to be measured and paid seperately) including carriage of material with in all leads, lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. | 2 | Each | |
| 92 | 64 | Construction chamber 300x300x500mm (three hundred into three hundred into five hundred millimetre) inside for stop cock with C.I. surface box 100mmx100mmx75mm (one hundred into one hundred into seventy five millimetre) (inside) with hinged cover fixed in cement concrete slab with 1:2:4 mix (one cement : two sand : four graded stone aggregate 20 mm (twenty millimetre) nominal size) 75 (seventy five millimetre) thick foundation concrete 1:5:10 (one cement :five sand : ten graded stone aggregate 40 mm (forty millimetre) nominal size) and inside plaster 15mm (fifteen millimetre) thick with cement mortar 1:3 (one cement : three sand ) finished smooth with a floating coat of neat cement including curing complete with 100mm (one hundred millimetre) thick walls of brick masonry in cement mortar 1:5 (one cement : five sand ) including carriage of material with in all leads, lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. | 6 | Each | |
| 93 | 65 | Providing and fixing Orissa pattern vitreous china water closet squatting pan (Indian type W.C. pan) size 580mm (five hundred eighty millimetre) of approved specification/make/ brand (earth work, bed concrete, foot rest and trap to be measured and paid for separately) including carriage of material within all leads, lifts and other incidental charges complete in all respect as per direction and satisfaction of Engineer-in-Charge.\n\n | 5 | Each | |
| 94 | 66 | Providing and fixing vitreous China bowl pattern urinal of approved specification/make flat back type of size 430mmx260mmx350mm (four hundred thirty millimetre into two hundred sixty millimetre into three hundred fifty millimetre) including connection the urinal with waste pipe by means of white lead mixed with chopped hemp complete in all respect including carriage of materials within all leads and lifts as per direction and satisfaction of Engineer-in-Charge. | 3 | Each | |
| 95 | 67 | Providing and fixing vitreous china division plate for urinals 600x300mm (six hundred millimetre into three hundred millimetre) of approved specification/make complete in all respect including carriage of material within all leads, lifts and other incidental charges complete in all respect as per direction and satisfaction of Engineer-in-Charge.\n\n\n | 3 | Each | |
| 96 | 68 | Providing and fixing 15mm (fifteen millimetre) nominal bore CP brass flush pipe/spreaders of approved specification/make for urinal with fitting such as union clamps etcetera (all in C.P Brass) including cutting holes and making good the same including carriage of material within all leads, lifts and other incidental charges complete in all respect as per direction and satisfaction of Engineer-in-Charge.\n\n | 6 | Per running metre | |
| 97 | 69 | Providing and fixing flat back 550x400mm (five hundred fifty into four hundred millimeter) vitreous china wash basin of approved specification/make with single hole for pillar tap with CI or MS brackets painted white including cutting holes and making good the same but excluding fittings including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. | 5 | Each | |
| 98 | 70 | Providing and fixing vitreous china padestal of approved specification/make for wash basin completerecessed at the back for the reception of pipe and fitting including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. | 5 | Each | |
| 99 | 71 | Providing and fixing 610 x 460 mm ( six hundred ten into four hundred sixty millimetre) with bowl depth 200mm (two hundred millimetre) stainless steel kitchen sink of approved standard ISI make with drain board and C.P. waste with C.I. or M.S. brackets painted white including cutting holes and making good the same but excluding fitting including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. | 1 | Each | |
| 100 | 72 | Providing and fixing rubber plug for sink / wash basin 32mm (thirty two millimeter) diametre complete in all respect including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. | 6 | Each | |
| 101 | 73 | Providing and fixing 32mm (thirty two millimetre) diametre C.P.brass waste of approved specification/make for wash basin or sink complete in all respect including carriage of materials within all leads and lifts as per direction and satisfaction of Engineer-in-Charge. | 6 | Each | |
| 102 | 74 | Providing and fixing 32mm (thirty two millimetre) diametre MI union of approved specification/make for wash basin or sink complete in all respect including carriage of materials within all leads and lifts as per direction and satisfaction of Engineer-in-Charge. | 6 | Each | |
| 103 | 75 | Providing and fixing 32mm (thirty two millimetre) diametre CP brass \"S\" trap for wash basin or sink complete in all respect including carriage of materials within all leads and lifts as per direction and satisfaction of Engineer-in-Charge. | 6 | Each | |
| 104 | 76 | Providing and fixing 600x450mm (six hundred into four hundred fifty millimetre) bavelled edge mirror of superior glass mounted on 6mm (six millimetre) thick AC sheet or ply wood sheet and fixed to wooden plugs with CP brass screws and washers complete in all respect including carriage of materials within all leads and lifts as per direction and satisfaction of Engineer-in-Charge. | 3 | Each | |
| 105 | 77 | Providing and fixing 600 x 20mm (six hundred into twenty millimetre) CP brass towel rail complete with CP Brass brackets fixed to wooden plugs with CP brass screws complete in all respect including carriage of materials within all leads and lifts as per direction and satisfaction of Engineer-in-Charge. | 4 | Each | |
| 106 | 78 | Providing and fixing 600x120mm (six hundred into one hundred twenty millimetre) glass self with CP brass brackets and guard rail complete fixed to wooden plugs with CP brass screws complete in all respect including carriage of materials within all leads and lifts as per direction and satisfaction of Engineer-in-Charge. | 4 | Each | |
| 107 | 79 | Providing and fixing CP brass toilet paper holder complete in all respect including carriage of materials within all leads and lifts as per direction and satisfaction of Engineer-in-Charge. | 5 | Each | |
| 108 | 80 | Providing and fixing chromium plated brass soap dish with CP brass brackets fixed to wooden cleats with CP brass screws complete in all respect including carriage of materials within all leads and lifts as per direction and satisfaction of Engineer-in-Charge. | 6 | Each | |
| 109 | 81 | Providing and fixing wall mixing faucet for shower and bath with overhead pipe (1210 cm (one thousand two hundred ten centimetre)) and bath shower including carriage of materials within all leads and lifts as per direction and satisfaction of Engineer-in-Charge. | 1 | Each | |
| 110 | 82 | Providing and fixing 15mm (fifteen millimetre) diametre brass bib tap (superior or heavy type) including carriage of materials within all leads and lifts as per direction and satisfaction of Engineer-in-Charge. | 7 | Each | |
| 111 | 83 | Providing and fixing 15mm (fifteen millimetre) diametre C.P.brass bib tap heavy duty with capstan head including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. | 7 | Each | |
| 112 | 84 | Providing and fixing 15mm (fifteen millimetre) diametre C.P. stop cocks heavy duty including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. | 7 | Each | |
| 113 | 85 | Providing and fixing 10/12.50/15.0 (ten/ twelve point five zero/ fifteen point zero litres vitreous china/ PVC low level flushing cistern of approved specification/make/brand with a pair of CI or mild steel brackets complete with fitting such as lead value less syphon 15mm (fifteen millimetre) nominal size brass ball valve with polythene float CP brass handle unions and couplings for connection with inlet outlet and over flow pipes 40mm(forty millimetre) diameter CP flush bend including cutting holes in walls and making good the same and connecting the flush bend with cistern and closet (over flow pipe to be measured and paid for separately) including carriage of material within all leads, lifts and other incidental charges complete in all respect as per direction and satisfaction of Engineer-in-Charge.\n\n | 5 | Each | |
| 114 | 86 | Providing and fixing white vitreous china wall pattern urinal flat back type size 430mm x260mm x 350mm (four hundred thirty millimetre into two hundred sixty millimetre into three hundred fifty millimetre) respectively with automatic flushing cistern with fittings R.S. or C.I. brackets standard size galvanised steel flush pipe and spreaders galvanised steel flush pipe and spreders with brass unions and G.I. clamps complete. Range of three urinal basin with 10 (ten) litres C.I. automatic flushing cistern of approved specification/make including including carriage of material within all leads, lifts and other incidental charges complete in all respect as per direction and satisfaction of Engineer-in-Charge.\n\n | 1 | Each | |
| 115 | 87 | Providing and fixing polythelene aluminium polythine (PE-AL-PE) composite pressure pipe U.V. stablized with carbon black conforming to IS: 15450-2004 for water supply including clamps at one metre spacing, cutting, fixing and making good the wall etcetera but excluding the cost of fittings (internal work) pipes exposed on wall including carriage of material with in all leads, lifts and other incidentals complete in all respect as per direction and satisfaction of Engineer-in-Charge. | |||
| 116 | 87.01 | 1216 (one thousand two hundred sixteen) (16 mm (sixteen millimetre) OD) pipe | 30 | Per running metre | |
| 117 | 88 | Providing and fixing composite end seal compression fittings as per IS 15450-2004 for cold water supply for example tees, elbows, reducers, connectors, couplers and clamps with jointing, testing and fittings complete including cutting and making good the wall etcetera including carriage of material with in all leads, lifts and other incidentals complete in all respect as per direction and satisfaction of Engineer-in-Charge. | |||
| 118 | 88.01 | Equal Tee 1216 (one thousand two hundred sixteen) | 9 | Each | |
| 119 | 89 | Providing and fixing composite end seal compression fittings as per IS 15450-2004 for cold water supply for example tees, elbows, reducers, connectors, couplers and clamps with jointing, testing and fittings complete including cutting and making good the wall etcetera including carriage of material with in all leads, lifts and other incidentals complete in all respect as per direction and satisfaction of Engineer-in-Charge. | |||
| 120 | 89.01 | Reducing Tee 1620 (one thousand six hundred twenty) x all branches | 6 | Each | |
| 121 | 90 | Providing and fixing composite end seal compression fittings as per IS 15450-2004 for cold water supply for example tees, elbows, reducers, connectors, couplers and clamps with jointing, testing and fittings complete including cutting and making good the wall etcetera including carriage of material with in all leads, lifts and other incidentals complete in all respect as per direction and satisfaction of Engineer-in-Charge. | |||
| 122 | 90.01 | Female Elbow 1216 x15mm (one thousand two hundred sixteen into fifteen millimetre) thread | 12 | Each | |
| 123 | 91 | Providing and fixing composite end seal compression fittings as per IS 15450-2004 for cold water supply for example tees, elbows, reducers, connectors, couplers and clamps with jointing, testing and fittings complete including cutting and making good the wall etcetera including carriage of material with in all leads, lifts and other incidentals complete in all respect as per direction and satisfaction of Engineer-in-Charge. | |||
| 124 | 91.01 | Male thread connector 1216 x15mm (one thousand two hundred sixteen into fifteen millimetre) thread | 15 | Each | |
| 125 | 92 | Providing and fixing composite end seal compression fittings as per IS 15450-2004 for cold water supply for example tees, elbows, reducers, connectors, couplers and clamps with jointing, testing and fittings complete including cutting and making good the wall etcetera including carriage of material with in all leads, lifts and other incidentals complete in all respect as per direction and satisfaction of Engineer-in-Charge. | |||
| 126 | 92.01 | Couplers 1216 (one thousand two hundred sixteen) | 9 | Each | |
| 127 | 93 | Providing and fixing PVC 500 (five hundred) litres net capacity water storage tank of ISI: 12701 marked, G.I. inlet and outlet connection, 15mm (fifteen millimetre) nominal bore ball valve and mosquito proof PVC cover with locking arrangement including hoisting upto all heights above ground level and including carriage of material with in all leads and lifts as per direction and satisfaction of Engineer-in-Charge. | 2 | Each | |
| 128 | 94 | Providing and fixing PVC 1000 (one thousand) litres net capacity water storage tank of ISI: 12701 marked, G.I. inlet and outlet connection, 15mm (fifteen millimetre) nominal bore ball valve and mosquito proof PVC cover with locking arrangement including hoisting upto all heights above ground level and including carriage of material with in all leads and lifts as per direction and satisfaction of Engineer-in-Charge. | 1 | Each | |
| 129 | 95 | Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipe ISI marked including jointing with approved adhesive etcetera including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. | |||
| 130 | 95.01 | 110mm (one hundred ten millimetre) diametre. | 51 | Per running metre | |
| 131 | 95.02 | 75mm (seventy five millimetre) diametre. | 15 | Per running metre | |
| 132 | 96 | Providing and fixing PVC floor trap ISI marked of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etcetera complete in all respect as per direction and satisfaction of Engineer-in-Charge. | |||
| 133 | 96.01 | 110mm x 90mm (one hundred ten into ninety) millimetre | 9 | Each | |
| 134 | 96.02 | 110mm x 75mm (one hundred ten into seventy five) millimetre | 6 | Each | |
| 135 | 97 | Providing and fixing PVC door bend with ovel access door, insertion rubber washer 3mm (three millimetre) thick bolts and nuts ISI marked complete including fixing with approved adhesive etcetera complete including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. | |||
| 136 | 97.01 | 110mm (one hundred ten millimetre) diametre. | 6 | Each | |
| 137 | 97.02 | 75mm (seventy five millimetre) diametre. | 6 | Each | |
| 138 | 98 | Providing and fixing PVC collars ISI marked including fixing with approved adhesive etcetera including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. | |||
| 139 | 98.01 | 110mm (one hundred ten millimetre) diametre. | 15 | Each | |
| 140 | 98.02 | 75mm (seventy five millimetre) diametre. | 5 | Each | |
| 141 | 99 | Providing and fixing PVC plain bend ISI marked including fixing with approved adhesive etcetera complete including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. | |||
| 142 | 99.01 | 110mm (one hundred ten millimetre) diametre. | 18 | Each | |
| 143 | 99.02 | 75mm (seventy five millimetre) diametre. | 10 | Each | |
| 144 | 100 | Providing and fixing PVC offset 45 degree ISI marked including fixing with approved adhesive etcetera complete including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. | |||
| 145 | 100.01 | 110mm (one hundred ten millimetre) diametre. | 5 | Each | |
| 146 | 100.02 | 75mm (seventy five millimetre) diametre. | 5 | Each | |
| 147 | 101 | Providing and fixing PVC double equal branch with ovel access door, ISI marked insertion rubber washer 3mm (three millimetre) thick bolts and nuts complete including fixing with approved adhesive etcetera complete in all respect including carriage of materials within all leads and lifts as per direction and satisfaction of Engineer-in-Charge. | |||
| 148 | 101.01 | 110mm (one hundred ten millimetre) diametre. | 5 | Each | |
| 149 | 101.02 | 75mm (seventy five millimetre) diametre. | 5 | Each | |
| 150 | 102 | Providing and fixing PVC single equal branch with ovel access door, ISI marked insertion rubber washer 3mm (three millimetre) thick bolts and nuts complete including fixing with approved adhesive etcetera complete in all respect including carriage of materials within all leads and lifts as per direction and satisfaction of Engineer-in-Charge. | |||
| 151 | 102.01 | 110mm (one hundred ten millimetre) diametre. | 6 | Each | |
| 152 | 103 | Providing and fixing PVC plain double equal branch ISI marked including fixing with approved adhesive etcetera complete in all respect including carriage of materials within all leads and lifts as per direction and satisfaction of Engineer-in-Charge. | |||
| 153 | 103.01 | 110mm (one hundred ten millimetre) diametre. | 5 | Each | |
| 154 | 103.02 | 75mm (seventy five millimetre) diametre. | 5 | Each | |
| 155 | 104 | Providing and fixing PVC clamps ISI marked of approved design with steel screws and rawl plugs etcetera complete including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. | BI01010001010000000000000515BI0100001115 | ||
| 156 | 104.01 | 110mm (one hundred ten millimetre) diametre. | 24 | Each | |
| 157 | 104.02 | 75mm (seventy five millimetre) diametre. | 20 | Each | |
| 158 | 105 | Providing and fixing 110mm (one hundred ten millimetre) diametre PVC \"P\" or \"S\" trap for water closet (squating pan) ISI marked including jointing the trap with the pan and PVC pipe with approved adhesive etcetera complete including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. | 5 | Each | |
| 159 | 106 | Providing and fixing 100mm (one hundred millimetre) diametre choromium plated grating of superior quality for flooring, gully and nahani traps complete in all respect including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. | 15 | Each | |
| 160 | 107 | Constructing man hole with RCC top slab in 1:2:4 mix (one cement : two sand : four graded crushed stone aggregate 20mm (twenty millimetre) nominal size) foundation concrete 1:4:8 (One cement : four sand : eight graded crushed stone aggregate 40mm (forty millimetre) nominal size) in side plastering 15mm (fifteen millimetre ) thick with cement mortar 1:3 (one cement : three sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 (one cement : two sand : four graded crushed stone aggregate 20mm (twenty millimetre) nominal size) finished smooth complete including curing and testing inside size 1200 x 900mm (one thousand two hundred into nine hundred millimetre) and 1000mm one thousand millimetre) deep including CI cover with frame (midium duty) 500mm (five hundred millimetre) internal dimension total weight of cover and frame to be not less than 116Kg. (one hundred sixteen kilogrmme) (weight of cover 58Kg. (fifty eight kilogramme) and weight of frame 58Kg. (fifty eight kilogramme) with 300mm (Three hundred millimetre) thick wall of squared rubble masonry coursed with hard stones of approved quality in cement mortar 1:3 (one cement : three sand) as per HP.PWD. specification and as directed by the Engineer-in-Charge complete in all respect including carriage of materials within all leads and lifts complete in all respect. | 3 | Each | |
| 161 | 108 | Supplying and fixing cast iron cover without frame for man holes the weight of cover to be not less than 23 Kg. twenty three kilogram) complete including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. | 4 | Each | |
| 162 | 109 | Providing and fixing grill jali panel on chamber including cutting, welding as per specifications and design including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge.. | 6 | Each |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
