Supply Of Material Testing Lab Ii Equipments, Chidambaram-Tamil Nadu

Supply Of Material Testing Lab Ii Equipments - 2 Pycnometer: Nconforms To Is: 2386 ( Part 3 ) Nglass Jar Complete With Brass Cone And A Rubber Seal. Ncapacity : 1 Kg N 3 Liquid Limit Device With Drop Counter – Hand Operated: Nconforming To Is: 2720 ( Part 5 ) Ncomplete With A Revolution Counter And Supplied With One Astm Grooving Tool, One Casagrande Tool And A Standard Gauge Block. N 4 Sand Pouring Cyclinder ( Small ) : Nconforming To Is: 2720 ( Part 28 ) This Comprises Of : Sand Pouring Cyclinder With A Conical Funnel And Shutter. Calibration Container 100Mm. Inner Diameter X 150Mm High With 200Mm. Diameter Rim. Metal Tray 300Mm. Square X 40Mm Deep With A 100Mm. Diameter Hole In The Centre N 5 Proctor Compaction Apparatus Light Nconforms To Is : 10074 Nit Comprises Of Proctor Type Compaction Mould Of 100Mm Diameter X 127.3Mm High With A 1000 Cm3 Capacity, Made Of Gun Metal, Consisting Of Mould Body, Base Plate And Collar, Compation Rammer Made From Corrosion Protected Steel Is Of 2.6Kg. Weight, 50Mm. Diameter With A 310Mm Controlled Drop. N 6 Direct Shear Apparatus Hand Operated: Nconforms To Is:2720 ( Part 13 ) Nthis Comprises Of A Shear Box Assembly 60Mm. Square, Supplied With Two Porous Plates, Two Solid Grid Plates, One Retaining Plate And One Loading Pad, Complete With A Shear Box Housing And Ball Roler Strips. Loading Unit Normal Stress Capacity Is 3 Kg. / Cm? 2 ( On A 60Mm. Square Specimen ) Complete With Lever Loading Fixture. Specimen Cutter For A Specimen Size 60Mm X 60Mm X25mm High. Set Of Weights As Follows, To Give A Normal Stress Of 3 Kg. / Cm? 2 Through Lever Arrangements; 4 X 0.05, Kg. / Cm? 2, 1 X 0.1Kg. / Cm? N 2, 1 X 0.2 Kg. / Cm ?2, 3 X 0.5Kg. / Cm? 2, 1 X 1.0Kg. / Cm ?2. Nessential For The Above Nproving Ring 2Kn Capacity Ndial Gauge 0.01Mm X 25Mm Travel. N 7 Deval Attrition Testing Machine: Nconforming To I.S.2386 ( Part 4 ) Nthis Machine Comprises Of Two Hollow Cyclinders With One End Closed And The Other Having Tight Fitting Covers. The Cylinders Are Mounted On A Shaft Making An Angle Of 300 With Its Axis Of Rotation. The Shaft Rotates At 30 To 33 Rpm Through A Reduction Gear. An Automatic Revolution Counter Is Also Provided To Count The Total Number Of Revolutions. Supplied With 12 Hardened Steel Balls Of 48Mm. Diameter. Wired For 440V. 3Ph. 50Hz. N

Refer document

Refer document

Refer document