| 1 | 1 | ITEM NO 1 : Excavation for foundation in earth,soil of all types,sand gravel and soft murum,including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming , watering including shoring and strutting etc. complete (lift upto 1.5 m ) By Mechanical Means ... (IN21-02, PgNo 197) | | 13.068 | Cum |
|---|
| 2 | 2 | ITEM NO 2 : Excavation for foundation in hard murum including removing the excavated material upto distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering , preparing the bed for the foundation and nacessary back filling , ramming, watering including shoring and strutting etc. complete(lift upto 1.50 m ) By Mechanical Means ... (INo21-06, PgNo 197) | | 13.068 | Cum |
|---|
| 3 | 3 | ITEM NO 3 : Providing and laying Cast in situ/Ready Mix cement concret in M-10 of trap/granite/quartzite/gneiss metal for foundation and bedding including bailing out water, Steel centering , formwork, laying/pumping compacting , roughening them if special finish is to be provided , finishing if required and curing complete. with fully automatic micro processor based PLC WITHOUT SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer ) etc. complete. With fine aggregate (Natural Sand /Crushed sand VSI Grade finely washed/Crushed Sand )Difference in Cost of Crush Sand : Natural Sand at 1575 - Crushed Sand at 700, i.e. 1575 - 700 =875 + Royalty inclusice of Surcharge 144.15 = Rs 1019.15 per CuMt. etc) ... (INo24-01 NS, PgNo 226) | | 3.267 | Cum |
|---|
| 4 | 4 | ITEM NO 4 : Providing and laying in situ/Ready Mix cement concrete M-20 of trap/granite/quartzite/gneiss metal for R.C.C .work in foundations like raft, strip foundations, graillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering formwork laying/pumping cover blocks compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc complete with fully automatic micro processor based PLC WITHOUT SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand/ Crushed sand VSI Grade finely washed/Crushed Sand )Difference in Cost of Crush Sand : Natural Sand at 1575 - Crushed Sand at 700, i.e. 1575 - 700 =875 + Royalty inclusice of Surcharge 159.29 = Rs 1033.29 per CuMt. etc) ... (INo25-11 NS, PgNo 230) | | 8.1 | Cum |
|---|
| 5 | 5 | ITEM NO 5: Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/granite/quartzite/gneiss metal for R.C.C .columns as per detailed designs and drawing or as directed including steel centering, formwork ,cover blocks laying /pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete, (Excluding reinforcement and structural steel) with fully automatic micro processor based PLC WITHOUT SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer)etc. complete. With fine aggregate (Natural Sand/Crushed sand VSI Grade finely washed/Crushed Sand )Difference in Cost of Crush Sand : Natural Sand at 1575 - Crushed Sand at 700, i.e. 1575 - 700 =875 + Royalty inclusice of Surcharge 158.29 = Rs 1033.29 per CuMt. etc) ... (INo25-31 NS, PgNo 232) | | 3.312 | Cum |
|---|
| 6 | 6 | ITEM NO 6 : Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/granite/quartzite/gneiss metal for R.C.C beams and lintels as per detailed designs and drawing or as directed including steel centering, formwork ,cover blocks , laying/pumping , compactionand roughening the surfaces if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC WITHOUT SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natrual Sand/Crushed sand VSI Grade finely washed /Crushed Sand )Difference in Cost of Crush Sand : Natural Sand at 1575 - Crushed Sand at 700, i.e. 1575 - 700 =875 + Royalty inclusice of Surcharge 1158.29 = Rs 1033.29 per CuMt. etc) ... (INo25-50 NS, PgNo 234) | | 3.726 | Cum |
|---|
| 7 | 7 | ITEM NO 7 : Providing second class Burnt Brick masonry with conventional /I.S. type bricks in cement mortal 1:6 in foundation and plinth of inner walls/in plinth external walls including bailing out water manully, striking joints on unexposed faces, raking out joints on exposed feces and watering etc. Complete... (INo 27-01, PgNo 254) | | 1.449 | Cum |
|---|
| 8 | 8 | ITEM NO 8 : Filling in plinth and floors with approved excavated material in 15 cm. to 20 cm. layers including watering and compacting etc complete (INo21-36, Pg No 201) | | 16.365 | Cum |
|---|
| 9 | 9 | ITEM NO 9 : Filling in plinth and floors with contractors material /brought from outside and approved by Engineer incharge in layers of 15 cm. to 20 cm. including watering and compaction etc compelte (INo21-37, Pg No 201) | | 31.914 | Cum |
|---|
| 10 | 10 | ITEM NO 10: Providing dry/trap/granite/quartizite/gneiss rubble stone soling 15 cm. to 20 cm. thick including hand packing and compacting etc complete (INo21-38, Page No 201) | | 22.491 | Cum |
|---|
| 11 | 11 | ITEM NO 11 : Providing and fixing in position TMT- FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footing ,foundations ,slabs, beams columns, canopies, staircase , newels, chajjas, lintels pardis ,copings, fins, arches etc. as per detailed designs ,drawings and schedules. including cutting , bending , hooking the bars, binding with wires or tack welding and supporting as required complete...(INo26-33 , PgNo 245) | | 0.904 | M.T. |
|---|
| 12 | 12 | ITEM NO 12 : Providing internal cement plaster 6 mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces in all position including scaffolding and curing etc complete... (INo32-01, PgNo268) | | 34.56 | SQM |
|---|
| 13 | 13 | ITEM NO 13: Providing structural steel work in trusses, other similar trussed purlins and members wih all bracing, gusset plates etc. as per detailed designs and drawings or as directed including cutting, fabricating, hoisting, erecting fixing in position, Making riveted/bolted/welded connection and one coat of anticorrosive paint and over it 2 coats of oil painting approved quality and shade etc. complete...(INo23-04, PgNo 223) | | 1.382 | M.T. |
|---|
| 14 | 14 | ITEM NO 14 : Providing and fixing colour coated Zincalume ® AZ150 (min 150 gms/sq.mt. Total on each side ) profiled sheets for roofing. The feed material is manufactured out of nominal 0.45 mm Base Metal Thickness (BMT) (0.5 MM TCT), Hi-strength steel with min.550 Mpa yield strength, metallic hot dip coated with Aluminium-Zinc alloy (55% aluminium 43.4% zinc 1.6% silicon) with COLORBOND (R) steel quality super durable polyester paint coat (with inorganic pigment). The paint shall have a total coating thickness of nominal 35 um, comprising of nominal 25 um exterior coat on top surface and nominal 10 um reverse coat on back surface. Profile sheet shall have nom. 950-1050 mm effective cover width and nominal 25-30 mm deep ribs with subtls square fluting in the five pan at nominal 180-250 mm center-to-center. The end rib shall be designed for anti-capillary groove. & return leg. The feed material should have coil manufacturers product details marked a regular interval. Including fasteners with min. Fastened with min. 25 um Zinc-Tin alloy coated, Hex head, self-drilling screw etc. Complete. (weight of profile 4.52 kg/sqm)...(INo38.34, PgNo 302) | | 176 | SQM |
|---|
| 15 | 15 | ITEM NO 15 :Providing and fixing board displaying information, such as 'Name of work, Tender cost, Name of Contractor, Work completion and liability period etc', having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles of size 35mmx35mmx3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation, and labour etc complete. Spec. No. As directed by Engineer in Charge ( INo6-36 , PgNo. 73) | | 1 | No |
|---|
| 16 | 16 | ITEM NO 16: Royalty charges for HARD MURUM. Rate Inclusive of surcharge of 2% ( 141.34 + 2.82=144.16, Say 144.15) … (INo1-A, PgNo 1) | | 31.914 | Cum |
|---|
| 17 | 17 | ITEM NO 17 :Royalty charges for RUBBLE. Rate Inclusive of surcharge of 2% ( 141.34 + 2.82=144.16, Say 144.15) … (INo1-G, PgNo 1) | | 22.491 | Cum |
|---|
| 18 | 18 | ITEM NO 18 : Royalty Charges for NATURAL SAND . Rate Inclusive of surcharge of 2% ( 141.34+2.82=144.16, Say 144.15) … (INo1-l , PgNo 1) | | 0.727 | Cum |
|---|
| 19 | 19 | ITEM NO 19 :CONCRETE Compressive Strength OF C.C. Cube (Set of 3 cubes )…(Ino 19-VQC, PgNo 588) | | 2 | Test |
|---|
| 20 | 20 | ITEM NO 20 : STEEL BAR TESTING Upto 16mm (Set of 3 Bars)…(INo77-VQC, PgNo 591) | | 3 | Test |
|---|
