Construction Of Public Auditorium At Doom Dooma Under Untied Fund Schemes 2017 2018, Doom Dooma,Tinsukia-Assam

TDR : 23417833

Tender Notice
BOQ

Expired

Doom Dooma,Tinsukia , Assam

Tender Brief : Construction Of Public Auditorium At Doom Dooma Under Untied Fund Schemes 2017 2018

Document Fees
₹ 4046 /-

EMD
₹ 269760.0 /-

Tender Value
₹ 1.34 Crore /-

Submission Date
24-02-2020

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !

Name of Work: Construction of PUBLIC Auditorium at Doom Dooma under Untied Fund schemes 2017-18.
1	1	Dismantling all types of corrugated/ trapezoidal sheet roofing including ridges, hips, valleys and gutters etc. and stacking …. all levels..	600	m2
2	2	Dismantling wood work in frames, trusses, purlins and rafters including stacking the materials as directed by the department for all levels.	14.5	m3
3	3	Demolishing the plastering from walls/ R.C.C. and P.C.C. members without causing any damage to the wall/ member upto any …. all levels.	2.15	m3
4	4	Demolishing CC floors of various thickness including top layer and base course and disposal of debris as directed for all levels.	150	m3
5	5	Dismantling all types of ceiling, partition and wall lining and stacking the materials as directed by the department for all levels	85	m2
6	6	Demolishing RCC work including stacking of steel bars and disposal of unserviceable material as directed for all levels …	2.2	m3
7	7	Demolishing brickwork including stacking of serviceable materials and disposal of unserviceable materials as directed for all levels …	16.8	m3
8	8	Dismantling steel work in built up sections in joists, angles, channels, tees, flats etc. including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking the materials as directed by the Department for all levels	6000	kg
9	9	Earthwork in excavation for foundation trenches of walls, retaining walls, footings of column, steps, septic tank etc .... (A) Up to a depth of 2.00m below the existing GL. (a) In ordinary soil	212.9	M3
10	10	Providing brick soling in foundation and under floor with stone/ best quality picked jhama brick, sand packed ...(a).Brick on flat soling.	1318.2	M2
11	11	Plain cement concrete works with coarse aggregate of sizes 13mm to 32mm in foundation bed for footing steps, walls,…. (a) In prop 1:3:6	19.32	M3
12	12	Supplying, fitting and fixing in position reinforcement bars conforming to relevant I.S. Code for R.C.C. work/ R.B. walling including straightening, cleaning, cutting and bending to proper ….\n (a) From Primary Producer: TATA/SAIL/Esser Steel/ Jindal Steel/Shyam Steel/RINL\n (i) TMT Corrosion resistant Steel (CRS) reiforcement bar …	248	Qtl
13	13	Supplying, fitting and fixing in position reinforcement bars conforming to relevant I.S. Code for R.C.C. work/ R.B. walling including straightening, cleaning, cutting and bending to proper ….\n(b) Other ISI approved TMT reinforcement bar (SAI/BISCON/THERMAX)\n(For Assam Type Bldg., drain works, retaining wall&boundary wall etc.)	0.88	Qtl
14	14	Supplying, fitting and fixing in position reinforcement bars conforming to relevant I.S. Code for R.C.C. work/ R.B. walling including straightening, cleaning, cutting and bending to proper ….\n(c) ISI approved Mild steel reinforcement bar (M.S.Bar)	9.38	Qtl
15	15	Providing form work of ordinary timber planking so as to give a rough finish including..Foundation, footings, bases of columns, pile cap, raft ….. (b) Using 25mm thick plank	125.4	M2
16	16	Sides of tie beams, grade beams etc. at or below ground level. (b) Using 25mm thick plank	243	M2
17	17	Columns, Pillars, Posts & Strut… (a) Square, Rectangular, polygonal in plan or any shape\n(ii) Using 25mm thick plank	457	M2
18	18	Sides and Soffits of Beams, beam haunchings, cantilever girders, bressumers, lintels and horizontal ties. (a) For depth not exceeding 1.0M. (ii) Using 25mm thick plank	593	M2
19	19	Flat Surfaces such as soffits of suspended floors, roofs, landings, cantelever slabs, chajjas, balconies and the like. (a) Floors etc. upto 200mm in thickness. (ii) Using 25mm thick plank	450	M2
20	20	Staircase with sloping or stepped soffits including risers and stringers but excluding Landing. (Using 38mm thick plank)	72	M2
21	21	Extra for each subsequent floor or part thereof above the First Floor level as mentioned in item no. 3.1.1 & 3.1.3(b).	462.5	M2
22	22	Providing and laying plain/reinforced cement croncrete works cement, coarse sand & 20mm down graded stone aggregate including dewatering if necessary, and curing complete but excluding ….\n(A) In substructure up to plinth level … \nFoundation, footing, columns with base tie and plinth beam, pile cap, … (b) M20 or Prop. 1:1.5:3	52	M3
23	23	(B) In super structure from plinth level up to 1st floor level. \n(ii) Columns, pillars, posts, struts, suspended floor, roof, landing, shelf and support, balcony, lintel\n(b) M20 grade concrete or Prop. 1:1.5:3	155.25	M3
24	24	Extra over item Nos. 2.2.1 (I) (B), above for each subsequent floor or part thereof above the 1st floor level.	53.94	M3
25	25	Brick work in cement morter with 1st class brick including racking out joints & curing complete as directed.(I) In Sub-struc upto pl (c). In prop 1:5.	107.5	M3
26	26	Earth/ sand filling in plinth in layers not more than 150mm thick including necessary carriage, watering, ramming … ( c) With river sand or silt by truck carriage including loading and unloading.	1305.45	M3
27	27	Providing and laying 25mm thick damp proof course with cement concrete in prop 1:1.5:3 with graded stone agg. of 10mm down nominal size including providing approved damp proof admixture in proportion as recommended by the manufacturer including curing etc. complete as directed.	20.94	M2
28	28	1st class brick nogged wall in cement mortar including racking out joints and curing complete as directed l … (A) 112mm thick brick wall (b) In cement mortar in proportion 1:5	670	M2
29	29	15 mm thick Cement plaster in single coat on single or half brick wall for interior plastering up to 1st floor level including arises, internal rounded … A) On rough side (a) In cement mortar 1:3	685	M2
30	30	15 mm thick Cement plaster in single coat on single or half brick wall for interior plastering up to 1st floor level including arises, internal rounded … A) On rough side (a) In cement mortar 1:3On fair side (b) In cement mortar 1:4	672	M2
31	31	Extra over item no 6.2.1to 6.2.3 for interior plastering above 1st floor level for every addl floor or part thereof including curing complete as directed. (a) Single coat plaster	300	M2
32	32	Extra over item no 6.2.1 to 6.2.3 for exterior plastering over wall up to a height of 1st floor level above ground level including curing complete as directed. (a) Single coat plaster	306	M2
33	33	Extra over item no 6.2.1 to 6.2.3 for plastering on celling and soffits of stairs up to 1st floor level (instead of plastering on walls) including curing complete as directed.	327	M2
34	34	Plain cement concrete floor base in prop1:3:6 laid in alternate bays as specified with coarse agg. of size 13mm to 32mm including dewatering if necessary, and curing etc. complete. (b) 50mm thick	1056	m2
35	35	25 mm thick cement concrete topping 1:2:4 (1cement : 2 coarse sand : 4 coarse aggregate of 12 mm nominal size) finished with a floating coat of neat cement finish to be laid in panels including curing complete as directed.	150	M2
36	36	65 mm thick cement concrete floor consisting of 50 mm under layer of cement concrete in prop. 1:3:6 and 15 mm thick wearing layer … complete as directed.	20	M2
37	37	Cement plaster skirting with cement mortar in prop. 1:3 finished with a floating coat of neat cement. (a)15 mm thick	185	M2
38	38	Kota-stone slab flooring of 18 mm thick over 20mm thick base of cement plaster 1:6 (1 cement : 6 coarse sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete... (1) 550mm x 550mm	1045	M2
39	39	Providing Antiskid Tiles of approved quality size, shape not less than 8mm on floor, skirting over a cement mortar bed 15mm thick of 1:3 (1 cement: 3 coarse sand) approved make fix with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf)/ white cement complete at all level as specified and directed.... (A) CERAMIC ..\ni)Normal range (Sizes 300 mm x 300mm and above)\n (a)Orient made: Galaxy Brown, Galaxy creama, Galaxy Pink, Galaxy Green, Pulsar Beige, Pulsar Blue, Pulsar Dove, Pulsar Pink, Burj Brown, Burj Green, Burj Slate..	3.6	M2
40	40	Providing polished ceremic wall tiles of approved quality size, shape and thickness not less than 8 mm on walls, skirtings etc…. \n(c) Delux range… Somany/Orient/Nitco/Varmora Make ... \n(ii) Of size 300mmx450mm and above	46.85	M2
41	41	Providing Vitrified tiles of approved quality size, shape and thickness not less than 8mm on floors …. (a) Normal range... Somany/ Orient/Nitco /Varmora/VITA/ Marbito/ Make (ii)size 600mmx600mm and above	252	M2
42	42	Providing and fixing, in position suspended false ceiling using E-Grid (exposed ceiling suspension 2430 system) of grid size 600mm x 600mm/1200mmx600mm with main runner 38 x 24mm, cross tee 29mm x 24mm & wall angle 24mm x 24mm . Using 4mm/6mm thick High Pressure Steam Cured Non Asbestos Fibre Cement Board as per IS 14862... (A) Standard Ceilings of Everest make or equivalent as directed by the departement... (i) Using 4 mm thick FC Board	139.53	M2
43	43	Grading roof for water proofing treatment with (a) Cement concrete 1:2:4 .. (b) Cement mortar (i) in proportion 1:3	1.8	M3
44	44	Providing and fixing 25mm thick wooden shutters for cup board including black enamelled M.S butt hinges (75mmx 40mmx1.12mm) 6 nos. with necessary wood screws (fully panelled) … \n(i) Using wooden plank c) With 1st class local timber.	5.5	M2
45	45	Providing, fitting and fixing anodised aluminium sliding windows and ventilators of standard sections of approved brand without horizontal glazing bars, joints mitred and welded and providing ... specified and directed for all levels.\n(a)2 Track sliding window.. (iv) 5 mm clear glass	65	M2
46	46	Wall painting (two coats) with Plastic emulsion paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) on new surface to give an even shade after throughly brushing the surfaces free from mortar droppings and other foreign matter and sand papered smooth.\n(a).Plastic Emulsion Paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac)	700	M2
47	47	Providing two coats of Birla White Wall Care Putty (Water Resistant White Cement based putty for concrete/ mortar walls and ceiling both internal and external) after removing all loosely adhering material from the wall surface with the help of emery stone, putty blade or wire brush and moistening the wall with sufficient quantity of clean water as specified and directed by the department. (Total thickness of two coats is maximum 1.5mm)	1365	M2
48	48	Finishing wall with water proofing weather coat smooth anti-fungal exterior painting of Ace brand of Asian Paints and of required shade on old/new wall surface after cleaning and clearing the surface etc. including scaffolding complete as directed at all levels (two coats)...	660	M2
49	49	13.6.3-Applying priming coat over new wood and wood based surfaces over 100mm in girth/width after and including preparing the surface ….(b) With ready mixed paint, Wood primer pink/white …	56	M2
50	50	13.6.5-Painting two coats (excluding priming coat) on new wood and wood based surface with enamel paint of approved brand and manufacturer ..... (i) Surfaces over 100mm in width or girth. ... \nGeneral purpose (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac).	56	M2
51	51	Applying primary coat over new steel and other metal surface over 100m in width or girth after preparing the surface by throughly cleaning oil,g.… With ready mixed \"red-lead/ red oxide\" primer.	5.6	M2
52	52	Painting two coats (excluding priming coat) on new steel and other metal surface with enamel paint of approved brand and manufacture….. (i).Surfaces over 100mm in width or girth. a). General purpose (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac).	5.6	M2
53	53	Supplying, fitting, fixing anodised aluminium fittings of approved make, reasonably smooth, free from sharp edges and corners, flaws and other defects and with counter sunk holes…\n(a) Sliding door bolts (i) 300mm x 16m	8	Each
54	54	(b) Tower bolts ii) 250mm x 12mm	10	Each
55	55	iv) 150mm x 10mm	10	Each
56	56	(c) Door handles (iii) 150mm	20	Each
57	57	Providing, fitting and fixing M.S. grill of required pattern for windows/ clerestory windows/ openingwith M.S. flats at required spacing in frame all round, squre or round M.S. bars with round headed bolts and nuts or screws.\nII Ornamental grill... (c) Fixed to Brickwork/P.C.C/R.C.C.	995	kg
58	58	Providing, fitting and fixing powder coated pressed steel door frame made of 1.25mm/ 1.6mm thick sheet of various sizes with necessary hinge jamb, lock jamb, head and steel base ties at the bottom of the frame. ..for all levels. ….\n(a) 1.25mm thick sheet.. (iii) Size 125mm x 60mm (Single rebate)	43	Rm
59	59	Providing fitting and fixing compressed ready to fit Godrej make wood door shutter (Godrej Entranza Moulded Panel Door) for various thickness Conforming to IS 15380-2003,printed,shutter comprising of High Density Fiberboard skins (HDF) of 3.5 mm (hardened finely processed natural wood fibre) with panel design compressed on both faces,sandwitching, termite and borer resistant chemical treated and kiln seasoned wooden stiles and rails of 50mm-60mm width,lock block and high density flax board core / chemical treated and kiln seasoned timber core ... interiors. (ii) 35 mm thick with panel inserts of 20mm thickness.	27.5	M2
60	60	Providing, fitting, hoisting and fixing of roof trusses fabricated out of combination of any two or all of the following sections (i) Square section (ii) Rectangular Hollow section of specification RSH/SHS and (iii) M.S. circular hlollow section of Grade 210 including purlins, bottom runners and providing M.S. cleat,.. directed as per specifications. (a) Using TATA make RHS/SHS of Grade 310 conforming to relevant I.S. code 4923 : 1997	118	Qtl
61	61	Providing Pre Painted Galvanized Iron Sheet Roofing (PPGI) at all levels including fitting and fixing with self drilling, self tapping screws complete. (Roof trusses, purlins etc. to be measured and paid separately.) \nTATA Blue scope/ Dyna roof / Durakolor /Wonder Roof or equivalent as directed by the Departement... (iii) 0.50 mm thick	1430	M2
62	62	Providing Pre Painted Galvanized Iron Sheet (PPGI) accessories (Ridges / Valley / Gutter /Flashing) at all levels including fitting and fixing self drilling, self tapping screws complete complete.\nTATA Blue scope/ Dyna roof / Durakolor /Wonder Roof or equivalent as directed by the Departement... (iii) 0.50 mm thick	145	RM
63	63	Plain cement concrete apron in prop 1:4:8 with 20mm down graded coarse agg. Over soling including neat cement finish using cement slurry 2.75Kg. of cement per sq.m. of floor (soling to be measured separately). (b) 50mm thick	65	M2
64	64	19.5-Providing drain with brick work in cement mortar in proportion 1:5 with half brick thick side walls and 100mm thick C.C (1:3:6) base over one brick flat soling including 15mm thick cement plastering in prop. 1:3 finished with a floating coat of cement slurry as directed with necessary shttering for sides and earth work in excavation of foundation trenches and refilling the sides after completion of work etc. as specified...\n(ii). 300mm wide and average 250mm deep with bed slope 1 in 150 with initial depth of 100mm.	150	Rm
65	65	Providing precast R.C.C slab over drain ,septic tank etc. in prop. 1:2:4 reinforced with10mm M.S. bar @ 150mm centre … b). 75mm thick slab	12.5	M2
66	66	1.4-Raising low site around the building with approved soil obtained from outside by truck carriage including breaking clods, dressing etc. complete including paying necessary forest royelty, sales tax, land compensation, ... and specified.\n(b) Other than Guwahati city	290	M3
67	67	Providing and laying of inter locking concrete block pavement (ICBP) with cement concrete paver blocks as per IS 15658-2006 of thickness 80mm and 28 days compressive strength not less than 30 N/m over a layer of bedding sand of compacted thickness 30mm, laid either in stretcher/ running/ herringbone pattern of bonds as directed ....	800	M2
68	68	Pre construction anti - termite treatment at the bottom of foundation pits and walls on either side up to a height of 300mm from bottom of the excavation made for column plinth beam, wall, trenches etc. ... Department complete.\na) with aqueous emulsion having concentration 1:19 with chloropirophose solution (tricel or euivalent) and water, i.e. 1% solution.	237.5	M2
69	69	Pre construction anti - termite treatment in the back fill in immediate contact with the foundation structure after completion, column, wall etc. to a depth of 450mm and width 300mm (when required refill in 200mm thick layers) applying the emulsion @ 5 (five) litres per square meter towards the concrete and masonry walls ... Department complete.\na) with aqueous emulsion having concentration 1:19 with chloropirophose solution (tricel or euivalent) and water, i.e. 1% solution.	200	M2
70	70	Pre construction anti - termite treatment by applying in the entire levelled area after plinth filling and before laying floor by applying the emulsion @ 5 (five) litres per square meter of the surface to be spread ... Department complete.\na) with aqueous emulsion having concentration 1:19 with chloropirophose solution (tricel or euivalent) and water, i.e. 1% solution.	1075	M2
71	71	Pre construction anti - termite treatment by applying in the junction of walls, column with the floor before laying floor and after operation of item no. 26.1.3 above making a channel 30mmx30mm all over the walls and making rod holes @ 150mm apart up to ground level below and applying emulsion @ 11 litres per square meter .... Department complete.\na) with aqueous emulsion having concentration 1:19 with chloropirophose solution (tricel or euivalent) and water, i.e. 1% solution.	156.25	M2
72	72	26.1.5-Pre construction anti - termite treatment by applying the soil along the external perimeter of the building (after construction completed) to a distance close to the plinth wall as specified and as directed by the deptt. up to a depth of 300mm making rod holes along ... Department complete.\na) with aqueous emulsion having concentration 1:19 with chloropirophose solution (tricel or euivalent) and water, i.e. 1% solution.	150	Rm
73	73	Suppling, fitting and fixing 20mm dia aluminium rod with aluminium bracket at both ends of the pelmet over door and windows as directed and specified at all levels.	33	Rm
74	74	Providing, fitting and fixing anodised aluminium partition walls of standard sections of approved brand, joints mitred and welded (manufactured to relevant I.S. specification) and providing and fitting angle cleat, rubber gasket, bolting device screws etc. at all levels.\n(i)Partly 6mm thick glass panes and 12mm prelaminated ply board	10	M2
75	75	15 mm thick plain cement mortar bands in cement mortar 1:4 in width including curing complete as directed.\nA) Up to 300 mm width (c) Raised band	10	M2
76	76	Pointing on brick work with cement mortar including curing complete as directed.(Measurement shall be taken on surface area of the wall).\nA) Cement mortar prop. 1:3 (c) Raised and Cut pointing	10	M2
77	77	Chequered Terrazo tiles of 22 mm thickness with marble chips of sizes up to 6 mm fixed on wall with 10 mm thick bed of cement plaster in proportion 1:3 (1 cement : 3 coarse sand) jointed with neat white cement slurry mixed with pigment to match the shades of tiles including rubbing and polishing complete with tiles of any approved shade/shades. \n(c) Using ordinary cement	8	M2
78	78	Supply, Installation, Fixing of DRY CHEMICAL POWDER Fire Extinguisher confirming to IS: 2171 with ISI mark and CO2 cartridge will be confirming to IS: 4947 with ISI mark, Powder will be confirming to IS: 4308 with ISI Mark (5 KG) \nBRAND : FIRESTOP / FIREND / FIRE SHIELD	4	Each
79	79	Providing fitting and fixing vitreous water closet squatting pan (Indian type W.C Orissa pattern) with all fittings and fixtures complete including cutting and making good to the walls and floors whereever required. (Flushing Cistern to be paid separately)..\nIndian type W.C Orissa pattern of size 580 x 440 mm \na) White.. ii) Hindware make	2	Each
80	80	Providing fitting and fixing vitreous china pedestal type water closet (European type W.C pan 400mm high ) with seat and lead ,CP brass hinges and rubber buffers , CI/MS brackets , 40 mm dia flush band with fittings including painting of fittings and brackets, required. (Flushing Cistern to be paid separately)\nA) Parryware make.. a) White.. (v) Elite S Trap (Cat No.C0297) (inclusive of seat cover)	1	Each
81	81	Supplying, fiting and fixing PVC flushing cistern with all internal fittings with CI brackets including fitting and fixing standard size CP flush pipe, union clamps etc. compete as directed and specified (pipes will be measured separately)\ni) Parryware make.. a) White.. (ii) Deluxe Single Flush (Cat. No. C8091/C8057)	3	Each
82	82	1.13.2-Providing vitreous China wash basin with CI/MS brackets, C.P brass chain with plug,PVC waste pipe including painting of fittings and brackets, cutting and making good the walls wherever required. (Pillar cock, stop cocks, waste coupling are to be paid separately)\n PEDESTAL BASIN (with pedestal).. (A) Parryware Make\n(b) Coloured.. (i) Cascade NXT 550 x 440 with long Pedestal (Cat. No.C0404/C0380)	2	Each
83	83	Basin (without pedestal)..(A) Parryware Make (b) Coloured.. (i) Star Basin 550 x 400 (Cat. No.C0450)	2	Each
84	84	Providing fitting and fixing Mirror with plastic frame of size 500x400mm complete as directed and specified.	2	Each
85	85	Providing fitting and fixing Glass Shelf complete as directed and specified.. Glass shelf with C.P. guard rail \n(ii) Sona make (Cat. No.TR-0701).. (c) 600mm	4	Each
86	86	Providing, fitting and fixing recessed soap tray / soap dish complete as directed and specified… (b) Sona Make\n(ii) Soap dish pears (Cat.No.TR-0662) / Soap dish square (Cat.No.TR-0663)	3	Each
87	87	Supplying fitting and fixing C.P. bib cock 15mm dia of approved brand directed and specified. (G.I. & C.P pipes will be measured separately) . (VI) Sona brand (i) Bib Cock ( Code.No.RG-5015)	6	Each
88	88	Supplying fitting and fixing chrome plated (C.P.) stop-cock of approved brand and size as mentioned below as directed and specified….. (IV)Sona brand (a) 15mm dia Stop cock male-female /Angle stop cock	5	Each
89	89	Supplying and fitting fixing C.P. pillar cock of 15mm dia of approved brand as specified and directed. (II) Jaguar make . (b)Long neck with areator	4	Each
90	90	Labour for sinking tube well with 40mm (internal) dia G.I. Pipes up to having strata, having potable water including fitting and fixing strainer hand pump and other accessories as directed ….	22.5	RM
91	91	Labour for test boring with 40mm (internal) dia G.I. Pipes including keeping surplus of earth and every 2.00m after first 3.00m depth and delivering the same …..	22.5	RM
92	92	Supplying, fitting and fixing suction pipes plain/bevel ended, conforming to relevant IS codes of practice including supplying and fitting of accessories, lowering of assembly pipes … B)PVC PIPE. SUPREME / PRINCE / FUSION /SFMC Brand. … iii) 40mm diameter	18	RM
93	93	Supplying fiting and fixing PVC pipes of 6Kgf/cm2 (Supreme/Prince) or ISI approved including joining , fitting and fixing with clamps etc. (a)In exposed or in trenches... (ii) 110 mm dia.	65	RM
94	94	Construction of inspection pit inside measurement 450mm x450mm x450mm flush with 100mm diameter HCI/PVC pipes and cement concrete base in proportion 1:3:6 over flat brick soling, 12cm brick wall in cement mortar in proportion 1:4 finished with 13mm cement plaster in proportion 1:2 in side wall and floor. ..	1	Each
95	95	Providing and fixing chlorinated polyvinyle chloride (CPVC) Pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings ... (A)) Exposed or in trenches… (c) 25 mm outer dia pipe	25	RM
96	96	Providing and fixing chlorinated polyvinyle chloride (CPVC) Pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings ... (A)) Exposed or in trenches…\n(e) 40 mm nominal outer dia pipe	15	RM
97	97	Providing, fitting and fixing recessed soap tray / soap dish complete as directed and specified.\n(a) Parryware Make.. (i) Recess SP & SG dish (Cat.No. C9935)	5	Each
98	98	Corner glass shelf with bracketsof Jaquar Make ..\n(a) Jaquar Make (iii) 300mm long (Cat. No. EC-0567)	4	Each
99	99	3.10.1- Supplying, fitting and fixing Chrome Plated (C.P.) wall mixer complete as directed. \n(V) Jaquar make iv) Wall mixer with 115mm long bend pipe 0n lower side Cat No.1119	1	Each
100	100	Providing, fitting and fixing CP towel rail complete as directed and specified.\n(a) Jaquar make (iii) Queen's (600mm long) (Cat.No.AQN-7711)	5	Each
101	101	Supplying and fitting gun metal country pit valve (full way valve) I.S.I. Make as specified and directed.\nb) 40 mm dia.	2	Each
102	102	Supplying and fitting gun metal country pit valve (full way valve) I.S.I. Make as specified and directed.c) 25 mm dia.	1	Each
103	103	Supplying and placing plastic cylindrical vertical claused top (PCVC) tank of Sintex / Polycon / Patton make over the stagging with manhole cover with locking and cleaning arrangement including providing pads of size as required for inlet and outlet pipes… \n(i) 2000 lt. capacity (a) Sintex make	1	Each
104	104	Supplying fitting and fixing ISI approved PVC filter 3.00 metre long.…	2	Each
105	105	Supplying fitting and fixing check valve (non return valve) including thread to pipes. \n(iii) 40mm diameter	1	Each
106	106	\nFlushing, clearing, washing and watering of the tube well…\nMaximum Amount = Rs3,500.00\n[Rate should be quoted above/below in percentage basis/As per. For example: If one quotes rate 10% above, then the rate will be 1.1 and if one quotes rate 10% below, then the rate will be 0.9 & for'As per', the rate will be 1]	1	job
107	107	For Electrification and Motor pump set including energisation\nMaximum Amount = Rs7,75,627.00\n[Rate should be quoted above/below in percentage basis/As per. For example: If one quotes rate 10% above, then the rate will be 1.1 and if one quotes rate 10% below, then the rate will be 0.9 & for'As per', the rate will be 1]	775627	job

Need a Bussiness Loan? Apply Now!
Buy Digital Signature
Bidding Support

Also Visit

Tenders

Assam Tenders

Construction Tenders

Building Construction Tenders

Auditorium Construction Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Construction Of Public Auditorium At Doom Dooma Under Untied Fund Schemes 2017 2018, Doom Dooma,Tinsukia-Assam

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Construction Of Public Auditorium At Doom Dooma Under Untied Fund Schemes 2017 2018, Doom Dooma,Tinsukia-Assam

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us