Name of Work: Annual Rate Contract for sheeting works in RCF Factory at Chembur, Mumbai-400074,for the year 2019-20.Special Condition:- The Party shall visit the site before quoting to acess the quantum and nature of the job.
Sl.No.
Item Description
Item Code / Make
Quantity
Units
1
1
Removing Existing Manglore tiles/ AC/ GI/ Galvalume Sheets/ polycarbonate plain and corrugated sheets from roof / cladding / partitions etc., excluding supporting structure but including scaffolding,handling, transporting,sorting and stacking at site lead up to 150m andor disposing etc complete as directed.The basic rate shall be reduced by 24/-per Sq.m for non stacking or if sheets removed by breaking.
A1
2000
Sq.M.
2
2
Refixing existing material after sorting and cleaning, removed from the existing structure as discribed in Item no. 1 using 8mm dia polymer coated iron L or J hook bolts, galvanized iron & bituminous washers, or self drilling fastners and EPDM washers, galvanized iron clamps, nuts and bolts including sealing the existing holes with suitable material etc. complete and as directed. (Net Area covered by sheeting will be measured. Overlaps will not be paid separately)
A2
600
Sq.M.
3
3
Providing and fixing 6 mm thick Non-asbestos high impact\nPolypropylene reinforced cement corrugated sheet of approved make conforming to IS: 14871-2000 laying the same in position as per the stipulation in IS: 3007-1991 using 8mm dia polymer coated iron L or J hook bolts, galvanized iron & bituminous washers, or self drilling fasteners and EPDM washers, galvanized iron clamps, nuts and bolts etc. complete and as directed.\n(Net Area covered by sheeting will be measured. Laps will not be paid separately)\nNote:- The basic rate shall be reduced by Rs 192 per sqmt for using Asbestos sheets).
A3
3000
Sq.M.
4
4
Extra for using 8mm dia.Stainless steel (SS-304 grade)L or J hook bolts & nuts instesd of GI.\n
A4
2000
Sqm
5
5
Providing and fixing non-asbestos fiber cement high impact polypropylene reinforced roofing accessories in all colours with polymer coated J or L hooks, bolts and nuts and or G.I. seam bolts and nuts, G.I. plain and bitumen washers or with self drilling fastener and EPDM washer etc. complete as directed.
A5
100
Rmt
6
6
Providing & fixing UV stabilised fiberglass reinforced plastic sheet roofing up to any pitch, including fixing with polymer coated 'J' or 'L' hooks, bolts & nuts 8mm dia. G.I plain/bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3% ultra-violet stabiliser in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall conform to IS 10192 and IS 12866.The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified.1.50 mm thick coloured F.R.P. corrugated sheet\n(Net Area covered by sheeting will be measured. Overlaps will not be paid separately)
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
