| 1 | 1 | Dismantling / taking down 15 mm dia bib cock/ stop cock/angle cock of any pattern or of any type and re-fixing the same after minor repairs such as replacement of washers etc complete all as specified and directed. Note :- Any major parts such as jumpers brass/ spindles/ caps etc to be measured as supply only and paid for separately under respective item. | | 150 | Each |
|---|
| 2 | 2 | S & F in repairs 15mm bore chromium plated brass bib taps with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. | | 200 | Each |
|---|
| 3 | 3 | Supply and fixing in repairs bib cock PTMT standard 15 mm dia of any colour high pressure screwed for iron pipe & fixed ( male or female as required) complete all as specified and directed. Make : Prayag/Polytuff | | 180 | Each |
|---|
| 4 | 4 | S & F in repairs 15mm bore, Stop valves, cast copper alloy,screwed down,high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. | | 35 | Each |
|---|
| 5 | 5 | Supply only Jumper brass with rubber or leather washer complete for 15 mm dia bib cock / stop cock brass complete all as specified and directed. | | 75 | Each |
|---|
| 6 | 6 | Supply only spindle brass for 15 mm dia CP Bib cock/ pillar cock/ concealed cock of any pattern complete all as specified and directed. | | 75 | Each |
|---|
| 7 | 7 | Supply only capstan head / cap of CP bib tap / CP stop cock 15 mm size complete all as specified and directed. | | 8 | Each |
|---|
| 8 | 8 | S & F in repairs 15mm bore fancy type chromium plated stop valve cast copper alloy, with long shank & cup (concealed type) with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. | | 8 | Each |
|---|
| 9 | 9 | S & F in repairs 20mm bore, gun metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. | | 8 | Each |
|---|
| 10 | 10 | S & F in repairs 15mm bore, brass CP central hole basin mixer for mixing hot & cold water screwed down for iron pipe complete all as specified and directed. | | 8 | Each |
|---|
| 11 | 11 | S&F CP brass hot & cold 15mm dia wall mixture for mixing hot & cold water with connecting legs & flengs in complete all as specified and directed. | | 2 | Each |
|---|
| 12 | 12 | S & F in repair CP leg for wall mixtur screwed to GI fitting complete all as specified and directed. | | 5 | Each |
|---|
| 13 | 13 | S & F in repair CP extension nipple 25mm to 40mm long screwed to GI fitting complete all as specified and directed. | | 5 | Each |
|---|
| 14 | 14 | S & F in repair brass spandle with washer complete suitable for wall mixture/WHP mixture complete all as specified and directed. | | 40 | Each |
|---|
| 15 | 15 | S & F in repair brass leg for centre hole WHP complete all as specified and directed. | | 5 | Each |
|---|
| 16 | 16 | S & F in repairs 15mm bore pillar taps, fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed. | | 30 | Each |
|---|
| 17 | 17 | S & F in repairs brass chromium plated shower rose 100mm dia with swivel joints with and including suitable shower arm any size, complete all as specified and directed. | | 15 | Each |
|---|
| 18 | 18 | S&F in repairs PVC waste pipe with socket suitable for connection to Waste fittings of 32/40mm dia, and of length minimum 75 cm complete all as specified and directed. | | 90 | Each |
|---|
| 19 | 19 | S & F in repairs 32/40mm waste fittings, brass chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and flynuts, flange end bedded in red lead cement complete all as specified and directed. | | 65 | Each |
|---|
| 20 | 20 | S & F in repairs 40/50 mm waste fittings for stainless steel sink (sink coupling), brass chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and flynuts, flange end bedded in red lead cement complete all as specified and directed. | | 8 | Each |
|---|
| 21 | 21 | S & F in repair PVC connection 15 mm size with brass nuts of length 600 mm of approved quality complete all as specified and directed. | | 150 | Each |
|---|
| 22 | 22 | S&F in repairs vitreous china wash down water closet pan (pedestal pattern), white, including connection to drain (or outgoing pipe) and to flushing pipe, ant-syphonage pipe, etc. complete all as specified and directed. | | 4 | Each |
|---|
| 23 | 23 | Fixing only in repairs vitreous china wash down water closet pan (pedestal pattern), white, including connection to drain (or outgoing pipe) and to flushing pipe, anti-syphonage pipe, etc. complete all as specified and directed. | | 4 | Each |
|---|
| 24 | 24 | S & F in repairs vitreous China squatting pan, 'Orissa' pattern, size 580 x 440 mm white, with integral foot rests including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor and fixed complete all as specified and directed. | | 12 | Each |
|---|
| 25 | 25 | S & F in repair vitreous china wash basin, white, flat back, size 550 x 400mm excluding taps, wastes but including brackets complete all as specified and directed. | | 8 | Each |
|---|
| 26 | 26 | Fixing only in repair vitreous china wash basin, of any description & size, excluding taps, wastes but including brackets complete all as specified and directed. | | 88 | Each |
|---|
| 27 | 27 | S & F in repairs sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x460mm bowl size 410mm x330mm x160mm complete all as specified and directed. | | 2 | Each |
|---|
| 28 | 28 | S & F in repairs Toilet paper holder recessed type stainless steel complete all as specified and directed. | | 5 | Each |
|---|
| 29 | 29 | S &F in repairs 40mm bore low density polyethylene pipes (LDPE) of pressure rating 6 kgf/Sqmcm fixed complete to walls (including fixing clamps), ceiling or laid in floors etc as in spouts in sunken & waste pipes etc incl all fittings such as elbows, tee or connecters etc complete all as specified and directed. | | 5 | RM |
|---|
| 30 | 30 | S & F in repair PVC valveless, syphonic action type flushing cistern 10 ltr capacity, low level, with inlet ball valve, float and handle including brackets, PVC bend long type and connectin to flush pipe of any size and pattern complete all as specified and directed. | | 20 | Each |
|---|
| 31 | 31 | S&F in repair flush pipe of polyethene of low or high density or PVC, 32mm dia, for low level cistern and fixed complete all as specified and directed. | | 10 | Each |
|---|
| 32 | 32 | S & F in repairs plastic water closet seat cover, white/ivory colour, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed. | | 40 | Each |
|---|
| 33 | 33 | M&L for 25mm dia fancy type PVC coated on MS pipe coloured curtain rod with brackets and knobs at both ends as per site requirement including taking down old existing PVC conduit pipes with accessories complete all as specified and directed. | | 18 | RM |
|---|
| 34 | 34 | S & F in repairs brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed. | | 4 | Each |
|---|
| 35 | 35 | S & F in repairs Jet spray, CP, brass body with wall hook and 1 mtr SS pipe complete all as specified and directed. | | 4 | Each |
|---|
| 36 | 36 | Dismantling and disconnecting of existing CI soil vent pipe 100 mm bore fixed to wall,laid in trenches incl all fittings & accessories complete all as specified and directed. | | 45 | RM |
|---|
| 37 | 37 | Dismantling and disconnecting of existing CI soil vent pipe 75 mm bore fixed to wall,laid in trenches incl all fittings & accessories complete all as specified and directed. | | 30 | RM |
|---|
| 38 | 38 | S & F cast iron soil waste and vent pipe 75mm bore with or without ears fixed with chemical cement joints laid in trenches/floors or fixed in walls, complete all as specified and directed. | | 25 | RM |
|---|
| 39 | 39 | S & F cast iron soil waste and vent pipe 100mm bore with or without ears fixed with chemical cement joints laid in trenches/floors or fixed in walls, complete all as specified and directed. | | 30 | RM |
|---|
| 40 | 40 | Fixing only cast iron soil waste and vent pipe 75mm bore with or without ears fixed with chemical cement joints laid in trenches/floors or fixed in walls complete all as specified and directed. | | 10 | RM |
|---|
| 41 | 41 | Fixing only cast iron soil waste and vent pipe 100mm bore with or without ears fixed with chemical cement joints laid in trenches/floors or fixed in walls complete all as specified and directed. | | 15 | RM |
|---|
| 42 | 42 | Sealing only joints of cast iron pipes and fittings with chemical cement and making the joints leak proof complete all as specified and directed. | | 15 | Each Joint |
|---|
| 43 | 43 | S&F in repairs oval access doors to cast iron pipes of 75mm bore with rubber washer packing & bolts & nuts as required complete all as specified and directed. | | 15 | Each |
|---|
| 44 | 44 | S&F in repairs oval access doors to cast iron pipes of 100mm bore with rubber washer & bolts & nuts as required complete all as specified and directed. | | 15 | Each |
|---|
| 45 | 45 | S & F in repairs CI bends any radius, 100mm bore, diminishing pieces or tapers, etc with or without oval access doors, complete all as specified and directed. | | 6 | Each |
|---|
| 46 | 46 | S & F in repairs CI bends any radius, 75mm bore, diminishing pieces or tapers, etc with or without oval access doors, complete all as specified and directed. | | 6 | Each |
|---|
| 47 | 47 | S & F in repairs 100mm bore CI branch pieces, double (spigot or socketed type) with oval access doors complete all as specified and directed. | | 6 | Each |
|---|
| 48 | 48 | Fixing only CI fittings 75/100mm size of any type & description complete all as specified and directed. | | 15 | Each |
|---|
| 49 | 49 | S&F in repairs Mild steel galvanised wire cloth 0.46mm nominal dia of wire and 1.18 mm average width of aperture fixed with tinned tacks or galvanised wire staple, complete all as specified and directed. | | 65 | Sqm |
|---|
| 50 | 50 | S & F in repairs mild steel Butt Hinges, 100 mm size, medium weight, cold rolled fixed with screws/welding to wooded/steel frames or chowkats, complete all as specified and directed. | | 65 | Each |
|---|
| 51 | 51 | M&L welding in repairs with thickness of metal not exceeding 6mm and not exceeding 2.5 cm in length etc complete all as specified and directed by Engineer - in – Charge. | | 30 | Each |
|---|
| 52 | 52 | M&L in repairs 2nd HW plain fillets, square, rectangular or triangular in section, wrought, secured with nails/brads or secured with screws, cross sectional area exc 6 sqcm and n. exc 13 sqcm, c. | | 30 | RM |
|---|
| 53 | 53 | S&F for MS sliding door bolt 250 mm long stove enamelled black with bright bolt etc. complete all as specified and directed. | | 14 | Each |
|---|
| 54 | 54 | S & F in repairs 200 mm aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed. | | 15 | Each |
|---|
| 55 | 55 | Supply and fixing in repair 125 mm long aluminium handles, fabricated type, anodised and fixed complete all as specified and directed. | | 40 | Each |
|---|
| 56 | 56 | S&F of MS 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed. | | 13 | Each |
|---|
| 57 | 57 | S&F for MS tower bolt 200 mm long stove enamelled black with bright bolt complete all as specified and directed. | | 64 | Each |
|---|
| 58 | 58 | S&F for MS pressed handles, oval type stove enamelled black 125 mm long complete all as specified and directed. | | 60 | Each |
|---|
| 59 | 59 | S & F floor door stopper 140mm size of aluminium alloy body and tounge, anodised, with hard drawn steel spring complete all as specified and directed. | | 17 | Each |
|---|
| 60 | 60 | S & F hasp & staple 100mm size, safety type, Aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed. | | 12 | Each |
|---|
| 61 | 61 | Supply and fixing in repair 40 mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished and fixed complete all as specified and directed. | | 6 | Each |
|---|
| 62 | 62 | Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/springs clips complete all as specified and directed. | | 154 | Sqm |
|---|
| 63 | 63 | S & F 3.0mm thick sheet glass ordinary quality and glazing with oil putty in squares n. exc 0.50 Sqm in each pane complete all as specified and directed. | | 135 | Sqm |
|---|
| 64 | 64 | S & F 3.0mm thick figured glass, pin head type and glazing with oil putty in squares n. exc 0.50 Sqm in each pane complete all as specified and directed. | | 14 | Sqm |
|---|
| 65 | 65 | S & F 3.0mm thick sheet glass ordinary quality and glazing with oil putty in squares exc 0.50 Sqm in each pane complete all as specified and directed. | | 5 | Sqm |
|---|
| 66 | 66 | Taking down chowkhats or frame with shutters (without taking off shutters from the frames) and refixing in the same opening and area exc 1.50 sqm but n. exc 4.0 sqm each complete all as specified and directed. | | 22 | Each |
|---|
| 67 | 67 | Taking down shutters of any description exceeding 1.00 sqm but not exceeding 2.00 sqm each and refixing in the same opening including easing and adjusting including renewal of unserviceable screws etc. complete all as specified and directed. | | 20 | Per Leaf |
|---|
| 68 | 68 | Taking down shutters of any description not exceeding 1.00 sqm each and refixing in the same opening including easing and adjusting including renewal of unserviceable screws etc. complete all as specified and directed. | | 10 | Per Leaf |
|---|
| 69 | 69 | Re-securing or easing & adjusting, without taking down shutter of any description exc 1 sqm but n. exc 2.0 sqm each complete all as specified and directed. | | 20 | Per Leaf |
|---|
| 70 | 70 | Re-securing or easing & adjusting, without taking down shutter of any description not exc 1.00 sqm each complete all as specified and directed. | | 15 | Per Leaf |
|---|
| 71 | 71 | M&L 2nd class hardwood, beads, straight (any size) for glazed or gauzed joinery, renewed, including mitres etc. including painting/polishing and matching complete all as specified and directed. | | 12 | RM |
|---|
| 72 | 72 | S&F in repairs 18/19mm thick pre-laminated particle board, interior grade, fixed with screws to timber frame work as in kitchen cupboards, drawers, shutters, shelves etc including teak wood lipping, 6mm thick on edges fixed with nails etc, complete all as specified and directed. | | 5 | Sqm |
|---|
| 73 | 73 | Taking down or up 15 mm bore steel tubing and connection including cleaning for refixing or removal complete all as specified and directed. | | 25 | RM |
|---|
| 74 | 74 | Taking down or up 20 mm bore steel tubing and connection including cleaning for refixing or removal complete all as specified and directed. | | 15 | RM |
|---|
| 75 | 75 | Taking down or up 25 mm bore steel tubing and connection including cleaning for refixing or removal complete all as specified and directed. | | 5 | RM |
|---|
| 76 | 76 | S & F GI tubing medium grade with all fittings and fixed to walls & ceilings or laid in floors, bore of pipe 15 mm complete all as specified and directed. | | 10 | RM |
|---|
| 77 | 77 | S & F GI tubing medium grade with all fittings and fixed to walls & ceilings or laid in floors, bore of pipe 20 mm complete all as specified and directed. | | 10 | RM |
|---|
| 78 | 78 | S & F GI tubing medium grade with all fittings and fixed to walls & ceilings or laid in floors, bore of pipe 15 mm in short lengths, complete all as specified and directed. | | 10 | RM |
|---|
| 79 | 79 | S & F GI tubing medium grade with all fittings and fixed to walls & ceilings or laid in floors, bore of pipe 25 mm complete all as specified and directed. | | 5 | RM |
|---|
| 80 | 80 | Refixing old GI tubing 15 mm bore pipe and connectio.ns in new or old position as on walls ceiling floors etc complete all as specified and directed. Note:-\n(i) Cleaning of pipe is included in ser No 73 here in before.\n(ii) Rates quoted by the contractor deemed to be included S & F new fittings as required. | | 5 | RM |
|---|
| 81 | 81 | Refixing only old GI tubing 20 mm bore pipe and connections in new or old position as on walls ceiling floors etc complete all as specified and directed.Note:-\n(i) Cleaning of pipe is included in ser No 74 here in before\n(ii) Rates quoted by the contractor deemed to be included S & F new fittings as required. | | 5 | RM |
|---|
| 82 | 82 | S & F in repair ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of size 20mm bore ( weight 210 gms Minimum) complete all as specified and directed. | | 200 | Each |
|---|
| 83 | 83 | S & F in repair ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of size 15mm bore ( weight 210 gms Minimum) complete all as specified and directed. | | 5 | Each |
|---|
| 84 | 84 | S&F in repair PVC Knob/Handle (as per sample) for 10 ltr capacity PVC low level flushing cistern complete all as specified and directed. | | 60 | Each |
|---|
| 85 | 85 | S&F in repair PVC Syphon Kit (as per sample) for 10 ltr capacity PVC low level flushing cistern complete all as specified and directed. | | 120 | Each |
|---|
| 86 | 86 | S&F in repair complete Veta washer set (as per sample) for 10 ltr capacity PVC low level flushing cistern complete all as specified and directed. | | 50 | Each |
|---|
| 87 | 87 | Fixing only in repair low level flushing cistern any capacity after carrying out minor repairs such as stopping of leakage etc. complete all as specified and directed. | | 10 | Each |
|---|
| 88 | 88 | S&F in repair covers for PVC overhead water tanks of any capacity (as per sample) complete all as specified and directed. | | 50 | Each |
|---|
| 89 | 89 | S&F in repairs two layers rotational moulded polyethylene water storage tanks (ISI marked) (cylindrical vertical top) hoisted and fixed in position 500 litre capacity complete all as specified and directed. | | 12 | Each |
|---|
| 90 | 90 | S&F in repairs ( to be fixed with screws & welding as required) continuous (piano) hinges, mild steel, bright finish or electrogalvanised, width of flap (when open) 30mm complete all as specified and directed. | | 5 | RM |
|---|
| 91 | 91 | S & F for catcher such as in cupboards etc to catch & support shutters of best quality complete all as specified and directed. | | 10 | Each |
|---|
| 92 | 92 | M&L for preparation of new or previously untreated wood and wood based surfaces of any description exc 10 CM width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. | | 35 | Sqm |
|---|
| 93 | 93 | S & F in repairs 110 mm bore PVC (SWR) of 6 kg/CM Square pressure fixed to walls with MS clamps of 25 x 3 mm flat iron and fixed with 75 mm long screw with PVC gutties n.exc .1.80 mtr centre to centre distance complete all as specied and directed.\n | | 80 | RM |
|---|
| 94 | 94 | Fixing only in repairs PVC rain water pipes of any descrption, jointing pipe with elbow/pipe joint with chemical cement/suitable adhesive & providing MS clamps of 25 x 3 mm flat iron and fixed with 75 mm long screw with PVC gutties n.exc .1.80 mtr centre to centre distance complete all as specified and directed. | | 20 | RM |
|---|
| 95 | 95 | S & F 110 mm bore, PVC (SWR) fittings such as bends, tee, shoe etc; fixed to PVC pipes, complete all as specified and directed. | | 10 | Each |
|---|
| 96 | 96 | Ranking out joints/pointing to brick work or brick tiles laid flat, in floors, roofs etc built in cement mortar complete all as specified and directed. | | 16 | 10 Sqm |
|---|
| 97 | 97 | M&L flush pointing to brick tiles/brick laid flat as in roof, paving/floor etc in CM 1:3 mixed with 5% of crude oil by weight of cement and including raking out joints/pointing etc; complete all as specified and directed. | | 16 | 10 Sqm |
|---|
| 98 | 98 | S & F in repairs brass chromium plated bottle traps for wash basins with inlet and out let screwed for pipe or connections including necessary packing, union and cap complete all as specified and directed. | | 2 | Each |
|---|
| 99 | 99 | S & F in repairs soap dish stainless steel, complete all as specified and directed. | | 5 | Each |
|---|
| 100 | 100 | S&F stainless steel plate racks of size 900mmx600mmx250mm having thickness of SS strip 1mm, fixed on wall etc complete all as specified & directed by Engr-in-Charge. | | 1 | Each |
|---|
| 101 | 101 | S & F in repairs CP grating (with or without waste hole), 125 mm size, fixed on floor/nahani traps etc complete all as specified and directed. | | 40 | Each |
|---|
| 102 | 102 | M & L Non-skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.06 sqm but n. exc 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 15mm thick screed in CM 1:6, including dismantling of old tiles of any description etc complete all as specified and directed. | | 15 | Sqm |
|---|
| 103 | 103 | Renewing non skid /glazed ceramic tiles in patches in floor or walls, area n. exc 5 sqm including cutting out broken tiles carefully, preparing beds and laying or setting, jointing & pointing new tiles complete all as specified and directed. Note :- New tiles shall be paid at supply only rate separately) | | 15 | Sqm |
|---|
| 104 | 104 | Cutting chases in brick walls girth exc 10 cm but not exc 20 cm wide for concealed water tubing etc and making good in CM 1:3 or PCC 1:2:4 as required complete all as specified and directed. | | 25 | RM |
|---|
| 105 | 105 | Dismantling carefully cement concrete in floor, etc around floor traps or any other concealed fittings, sealing joints with solvent cement or other suitable materials and making joint leak proof and making good surfaces with PCC 1:2:4 or CM 1:3. complete all as specified and directed. Note :- Repair/replacement of tiles in floor & floor trap if required shall be measured and paid separately), complete all as specified. | | 15 | Each Job |
|---|
| 106 | 106 | Supply only floor trap 75 mm dia with grating including jointing to waste pipe complete all as specified and directed. | | 15 | Each Job |
|---|
| 107 | 107 | Supply only non skid ceramic coloured tiles 300 x300 x7mm thick complete all as specified and directed. | | 1.2 | Per 100 Nos |
|---|
| 108 | 108 | Supply only glazed ceramic coloured tiles 450 x300 x7mm thick complete all as specified and directed. | | 1.8 | Per 100 Nos |
|---|
| 109 | 109 | Supply only glazed ceramic coloured tiles 300 x200 x7mm thick complete all as specified and directed. | | 1 | Per 100 Nos |
|---|
| 110 | 110 | Demolition of re-inforced cement concrete of any description & in any position not otherwise specifically provided for, complete all as specified and directed. | | 0.2 | Cum |
|---|
| 111 | 111 | M&L for RCC (1:2:4) type B-1 (using 20 mm graded stone aggregate) for slabs supported on walls, shelves, beams and columns, lintels, facia and the like, complete all as specified and directed. | | 0.23 | Cum |
|---|
| 112 | 112 | M&L for mild steel TMT bars 8 mm dia and over, cut to length bent to shape required including cranking, bending spirally etc and binding with mild steel wire not less than 0.9 mm dia as in reinforcement etc.complete all as specified and directed. | | 10 | Kg |
|---|
| 113 | 113 | Formwork for rough finished surfaces to soffit of suspended slab such as roof slab, floor slab/chajjas/beams/colns/fins/facia and etc not exceeding 200mm tick complete all as specified and directed. | | 6 | Sqm |
|---|
| 114 | 114 | M&L brick work with sub class `B' old size bricks straight or curved on plan exc 6.0m mean radius built in cement mortar 1:6 complete all as specified and directed. | | 2 | Cum |
|---|
| 115 | 115 | M&L brick work with sub class 'B' old size bricks straight or curved on plan exc 6 m mean radius built in CM 1:6 but except bricks (old serviceable bricks to be used) complete all as specified and directed.\nNote : The rate includes for cleaning of old bricks. | | 0.5 | Cum |
|---|
| 116 | 116 | M&L brick work with sub class 'B' bricks, straight or curved on plan to any radius in half brick walls built in CM (1:4), etc; complete all as specified and directed. | | 25 | Sqm |
|---|
| 117 | 117 | M&L flush pointing to brick walls etc in cement mortar 1:4 including racking out old joints all as specified and directed by Engineer-in-Charge | | 2 | Per 10 Sqm |
|---|
| 118 | 118 | Demolition of brick work or stone / boulder masonary, built in cement mortar including all quoins, arches, pillars etc., complete all as specified and directed. | | 3.65 | Cum |
|---|
| 119 | 119 | S&F in repair ball brass valves, high pressure, with polythene float & fly nut complete, screwed for iron pipe or brass ferrule,of size 20mm, etc complete all as specified and directed. | | 2 | Each |
|---|
| 120 | 120 | S & F in repairs 600mm x450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers, complete all as specified and directed. | | 40 | Each |
|---|
| 121 | 121 | M&L 25mm thick cement concrete type B-1, 1:2:4 (20 mm graded stone aggregate) as floors, sub-floors etc and finishing surfaces of concrete topping as even & fair or even & rough to receive the topping layer complete all as specified and directed. | | 20 | Sqm |
|---|
| 122 | 122 | M&L PCC 1:5:10 type D-2 using 40mm graded crushed/stone agg for foundations, filling & mass concrete, sub-base & sub-floors, etc. complete all as specified and directed. | | 1 | Cum |
|---|
| 123 | 123 | M&L Mild Steel framed work of Gde Fe-410-0 or Fe-310-0 as in doors chowkats (single or double) of angles or other section with gusset plates, rails, braces, bands straps, hold fast grill etc, complete and including necessary welding for fixing flat iron for fixing hooks and hinges complete all as specified and directed. | | 45 | Kg |
|---|
| 124 | 124 | Taking down cement or cement lime plaster of any description from brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specied and directed by Engineer-in-Charge. | | 396 | Sqm |
|---|
| 125 | 125 | M& L rendering 15mm thick in CM (1:4) on fair faces of brick work or concrete surfaces and finishing even & fair incl preparation of these surfaces for further treatment, complete all as specified and directed. | | 320 | Sqm |
|---|
| 126 | 126 | M&L rendering 15mm thick in CM (1:6) other than fair faces of brick work or concrete surfaces and finishing even & fair incl preparation of these surfaces for further treatment, complete all as specified and directed. | | 160 | Sqm |
|---|
| 127 | 127 | M& L rendering 10 mm thick in CM (1:4) and finishing even & fair as in ceiling incl preparation of these surfaces for further treatment, complete all as specified and directed. (Building height upto two story) | | 40 | Sqm |
|---|
| 128 | 128 | M&L applying two coats of oil bound distemper on newly plastered surfaces on walls etc. over a coat of primer including preparation of surface, complete all as specified and directed. | | 60 | Sqm |
|---|
| 129 | 129 | M&L applying three coat of white wash on newly plastered surfaces on wall including preparation of surface, complete all as specified and directed by Engineer-in-Charge. | | 20 | Sqm |
|---|
| 130 | 130 | M&L for applying two coats of weatehr proof exterior emulsion paint over a coat of exterior primer over newly plastered wall and ceiling surfaces including cornices & pillasters etc as per manufacturer's specification & instruction including preparation of surface, complete all as specified and directed by Engineer-in-Charge | | 30 | Sqm |
|---|
| 131 | 131 | M&L applying two coast of cement base paint on newly plasterd surfaces on walls etc complete all as specified and directed. | | 50 | Sqm |
|---|
| 132 | 132 | M&L applying three coat of white wash on newly plastered surfaces on ceiling complete all as specified and directred by Engineer-in-Charge. | | 40 | Sqm |
|---|
| 133 | 133 | M&L appply for a layer of hot blown bitumen of 85/25 penetration grade @ 1.75 kg/sqm incl cleaning the surface of roof or sunken etc complete all as specified and directed. | | 50 | Sqm |
|---|
| 134 | 134 | M&L 15mm thick cement plaster in CM 1:4 with water proofing compound (WPC to measurment & paid separately) and finishing top surface even & smoth as in roof slab /sunken floor , etc complete all as specified and directed. | | 50 | Sqm |
|---|
| 135 | 135 | Supply only water proofing compound. | | 15 | Kg |
|---|
| 136 | 136 | M&L in repairs marble work (Udaipur green slabs) not less than 16 mm thick (table rubbed and polished) as in cooking platforms and like in cement mortar (1:4) in pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade including rounding the edges complete all as specified and directed. | | 3 | Sqm |
|---|
| 137 | 137 | Taking down chowkats or frame with shutter (without taking off shutters from the frames) not exceeding 1.50 sqm each and removal from site complete all as specified and directed. | | 7 | Each |
|---|
| 138 | 138 | Taking down chowkats or frame with shutter (without taking off shutters from the frames) exc 1.50 sqm but n. exc 4.00 Sqm each and removal from site complete all as specified and directed. | | 7 | Each |
|---|
| 139 | 139 | Taking down shutters of any description exceeding 1.00 sqm but not exceeding 2.00 sqm each and removing to store complete all as specified and directed. | | 15 | Per Leaf |
|---|
| 140 | 140 | S & F pressed steel frames for doors with one or more rebates including hinges, lock strike plate, fixing lugs, etc., size of frame 125 x 60mm, complete all as specified and directed. (thickness of steel sheet shall be 1.25mm) | | 25 | RM |
|---|
| 141 | 141 | S & F pressed steel frames for doors with one or more rebates including hinges, lock strike plate, fixing lugs, etc., size of frame 105 x 60mm, complete all as specified and directed. (thickness of steel sheet shall be 1.25mm) | | 17 | RM |
|---|
| 142 | 142 | S & F pressed steel frames for doors with one or more rebates including hinges, lock strike plate, fixing lugs, etc., size of frame 75 x 60mm, complete all as specified (thickness of steel sheet shall be 1.25mm), complete all as specified and directed. | | 10 | RM |
|---|
| 143 | 143 | M & L for PCC 1:3:6 type C1 (using 20mm graded crushedstone aggregates) as in filling back of pressed steel door frames/chowkats and for fixing hold fasts, etc., complete all as specified and directed. | | 0.5 | Cum |
|---|
| 144 | 144 | S & F for factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet, reinforced with MS square tube fixed in opening as per specifications & drawing complete all as specified and directed. | | 35 | RM |
|---|
| 145 | 145 | S & F for 30 mm thick factory made solid panel PVC door shutter confirming to criteria of testing as per IS : 4020, consisting of frame made out of MS tube of 19 guage thickness & size 19x19mm for stiles and 15x15mm for top & bottom rails MS frames shall have a coat of red oxide primer of approved make and shall be covered with 5mm thick heat moulded PVC `C' channel of size 30x50mm forming styles and 5mm thick 75mm wide PVC sheets for top rail lock rail and bottom rail on either side and 10mm (5mmx2) thick 20mm wide cross PVC sheet as gap insert for top rail and bottom rail panelling of 5 mm thick PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rail with 30 mm wide x 5 mm thick PVC sheet beading on either side and joined together with solvent cement, adhesive and an additional 5 mm thick PVC strip of 20 mm width is to be struck on the interior side of 'C' channel using PVC solvent adhesive as per manufacturers specifications & drawings complete all as specified and directed. | | 9 | Sqm |
|---|
| 146 | 146 | S&F 2nd class HW 35mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauge, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut & mitred beads for securing glass, gauze, etc.; sizes of members of shutters as specified in SSR Part I Section 8, Clause 8.24 (a) complete all as specified and directed. | | 13.6 | Sqm |
|---|
| 147 | 147 | M & L for factory made 35mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed. | | 6 | Sqm |
|---|
| 148 | 148 | S&F factory made steel windows/ventilators with side hung shutters including projecting type hinges with steel handle and steel peg stay complete with glazing bars, dovetailed or welded, complete all as specified and directed. | | 5 | Sqm |
|---|
| 149 | 149 | S&F factory made windows/ventilators with side hung shutters including projecting type hinges with steel handle and steel peg stay complete with out glazing bars, complete all as specified and directed. | | 5 | Sqm |
|---|
| 150 | 150 | S & F MS galvanised mild wire cloth 0.46 mm nominal dia of wire and avarage width of aparture 1.18mm and fixed with tinned tacks or galvanised wire stapple complete all as specified and directed. | | 11.4 | Sqm |
|---|
| 151 | 151 | Supply only mild steel Butt Hinges, 100 mm size, medium weight, cold rolled fixed with screws/welding to wooded/steel frames or chowkats, complete all as specified and directed. | | 66 | Each |
|---|
| 152 | 152 | S & F 200 mm aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed. | | 40 | Each |
|---|
| 153 | 153 | S & F aluminium anodized handles cast type 125mm long complete all as specified and directed. | | 40 | Each |
|---|
| 154 | 154 | S&F in repairs tank nipple complete all as specified and directed by Engineer-in- Charge | | 25 | Each |
|---|
| 155 | 155 | Demolition of cement concrete (unreinforced) including tiles of any description & terrazo finish, etc. n. exc 15 cm thickness (below or above ground level)incl rubbish off the premises complete all as specified and directed. | | 3 | Cum |
|---|
| 156 | 156 | M&L for cement concrete type B1, 1:2:4 mix (using 20mm graded crushed stone aggregate) as in bedding, benching of manholes, copings, roof kerbs & surface channel etc. complete all as specified and directed. | | 1 | Cum |
|---|
| 157 | 157 | S&F in repair mild steel handles suitable for steel window/ventilatrs complete all as specified and directed. | | 100 | Each |
|---|
| 158 | 158 | S&F in repair mild steel peg stay suitable for steel window/ventilatrs complete all as specified and directed. | | 60 | Each |
|---|
| 159 | 159 | M&L providing cement concrete (RCC/PCC) 1:2:4, type B0 (using 12.5mm graded crushed stone agrregate) as in broken or cracked Chhajjas, RCC columns, beams, stairs/steps etc in one or two layers as required (thickness from 25mm to 40mm) and finshing the surface with 15mm thick cement plaster in CM 1:4 including taking out loose/cracked concrete portion and plaster etc and applying neat cement slurry before providing concrete, complete all as specified and directed. (Note : 1. Rates deemed to include for any scaffolding/ ladders or any other mean to work in two story buildings including welding of reinforcement. to be provided for repairs of chhajjas, beams, columns, stair case, fins, facia etc. \n2. The re-inforcement shall be measured & paid in subsequent item separately ) | | 5 | Sqm |
|---|
| 160 | 160 | Dismantling Asbestos sheet (corrugated or semi-corrugated, etc ) sheets in roof coverings etc complete all as specified and directed. | | 864 | Sqm |
|---|
| 161 | 161 | M&L for 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc. Fixed with L-type or screws J-type or cranked hook bolts complete all as specified and directed. | | 720 | Sqm |
|---|
| 162 | 162 | M&L for 6mm thick asbestos cement twopiece adjustable serrated ridge for corrugated or semi corruated sheets wing ridge fixed with L-type or screws J-type or cranked hook bolts complete all as specified and directed. | | 24 | Rm |
|---|
| 163 | 163 | S&F Plain, galvanised, mild steel sheeting of 0.63 mm thick, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 ridge etc. Fixed with L-type or screws J-type or cranked hook bolts complete all as specified and directed. | | 144 | Sqm |
|---|
| 164 | 164 | Demolition of brick work of any type built in cement mortar complete all as specified & directed. | | 4 | Cum |
|---|
| 165 | 165 | M&L brick work with sub class `B' old size bricks straight or curved on plan exc 6.0m mean radius built in cement mortar 1:4 complete all as specified and directed. | | 3 | Cum |
|---|
| 166 | 166 | All as per item No. 165 above but except bricks | | 1 | Cum |
|---|
| 167 | 167 | S & F 2nd class hardwood, factory made shutters, 35 mm thick plain framed panelled shutters (any number of panels) with with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both side. The size of rail & stiles as per IS :1003 (Part I), kiln seasoned and chemically preassure treated, complete all as specified and directed. | | 3 | Sqm |
|---|
| 168 | 168 | S&F for MS pressed handles, oval type stove enamelled black 150 mm long complete all as specified and directed. | | 4 | Each |
|---|
| 169 | 169 | M& L rendering 5 mm thick in CM (1:3) and finishing even & fair as in ceiling incl preparation of these surfaces for further treatment, complete all as specified and directed. (Building height upto two story) | | 16 | Sqm |
|---|
| 170 | 170 | Dismantling boarding, any description, fixed in any position with nails etc complete all as specified and directed. | | 98 | Sqm |
|---|
| 171 | 171 | S&F GI frame work of grid sie 605 x 605 mm for seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/intermediate channel 0.9mm thick having equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel at 457mm centre to centre complete all as specified and directed. | | 50 | Sqm |
|---|
| 172 | 172 | M&L for 6 mm thick Decorative AC sheet celing boards of size 600 x 600 to flat surfaces over snap grid and reinforced with GI wire netting and sunk of raised moulding etc complete all as specified and directed. | | 115 | Sqm |
|---|
| 173 | 173 | Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified & directed. \n | | 18 | Cum |
|---|
| 174 | 174 | M&L for 75 mm thick PCC (1:3:6) type C-2 (using 40mm graded agg) as in plinth protection complete all as specified & directed. | | 49 | Sqm |
|---|
| 175 | 175 | M&L for preparing wood or wood based surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed. | | 129 | Sqm |
|---|
| 176 | 176 | M&L for Preparing newly plastered surfaces of walls and applying three coats of Whitewashing on Walls | | 175 | Sqm |
|---|
| 177 | 177 | M &L for preparing newly plastered surfaces of walls and applying two coats of cement base paint over a coat of primer complete all as specified & directed. | | 450 | Sqm |
|---|
| 178 | 178 | M&L for prepairing new surfaces of ceiling and applying two coat of white wash etc complete all as specified & directed.\n | | 250 | Sqm |
|---|
| 179 | 179 | Preparing of plasteres or unplastered old decorate surface of walls of brooming down or steel wire brushing, scraping down smoke soot, moulds, mass and efflorescent, salt and trading oil and greasy spouts and applying one coat of white wash on walls including cornices etc complete all as specified and directed. | | 15000 | Sqm |
|---|
| 180 | 180 | Preparing of old plasteres or unplastered old decorate surface of celling of brooming for down make spots, trating oily/greasy spots, mass and efflorescence and applying one coat of white wash on ceilling including cornices etc complete all as specified and directed. | | 1500 | Sqm |
|---|
| 181 | 181 | Preparation of old (previously treated) plasted or unplastered surfaces of walls by washing, rubbing down and stopping of distermpered or painted surfaces of walls and applying one coat of oil bound distemper white or tinted on walls complete all as specified and directed. | | 600 | Sqm |
|---|
| 182 | 182 | Preparation of old plastered or unplastred old decorated surfaces of brooming down or steel wire brushing, scrapping down smake shoot, moulds, mass and efflorescent salts and trading oil and greasy spouts and applying one coat of cement base paint on walls including cornices etc complete all as specified and directed. | | 10000 | Sqm |
|---|
| 183 | 183 | M&L for applying each subsequent coat of sement base paint after applying first coat of cement base paint complete all as specified and directed. Note : First coat of cemen base paint shall be measured and paint separately under item No. 182 above. | | 3750 | Sqm |
|---|
| 184 | 184 | M&L for preparation old previously treated surface of steel and iton work any description over 10 cm width or girth and applying one coat of synthetic enamal paint on old steel surfaces, complete all as specified and directed. | | 1125 | Sqm |
|---|
| 185 | 185 | M&L for preparation old previously treated surface of wood of wood based surfaces 10 cm width or girth and applying one coat of synthetic enamal paint on old wooren surfaces, complete all as specified and directed. | | 112.5 | Sqm |
|---|
| 186 | 186 | Preparation of new or old plastered wall surface and applying the following :- (a) Applying wall care putty in two coats on wall surface and smoothening the surface with sand paper/ MECHANISED SANDER ETC prepatory to paint complete all as specified and directed. (b) Two coat of oil Bound distemper over a coat of chalk whiting priming by using Airless spray/ roller over complete all as specified and directed. Note:- Contractor may use manual scraping tools for complele removal and surface prepration with prior approval of Engr-in-Charge in case of using of Mechanical equipment are not possible. | | 640 | Sqm |
|---|
| 187 | 187 | Preparation of new or old plastered wall surface complete all as sepcified and applying the following :- (a) Applying wall care putty in two coats on wall surface and smoothening the surface with sand paper/ MECHANISED SANDER ECT PREPTORY TO PAINT ASdirected complete all as specified. (b) Two coat of weather preeof exterior emulsion over of external emulsion primer by using Airless spray/ roller over complete all as specified. Note:- C ontractor may use manual scraping tools for complele removal and surface prepration with prior approval of Engr-in-Charge in case of using of Mechanical equipment are not possible. | | 880 | Sqm |
|---|
