Furniture, Seating Facility, Chairs, Executive Chair, Furniture Items, Tables Supply-Delhi

Supply Of Office Furniture Quantity One Set Consisting Of Executive Table With Side Table Quantity 01 No., Executive Chair Quantity 01 No. As Per Specification And Drawing Attached. High Back Executive Chair Same Or Similar To Sketch Attached As Percent U201cexecutive Chair Sketch Percent U201d Percent U2022 The Seat And Back Cushion Of The Chairs Should Be Pressed On 12Mm Hot Press Moulded Ply Provided That Back Is Made Of Polyurethane Mould. The Seat Cushion Of The Chair Should Be Made Up Of 50Mm Thick High Density Of 45 Percent B12 Kg / M3 Polyurethane Mould And Back Cushion Should Be Made Up Of 38Mm Thick High Density 33 Percent B12 Kg / M3. The Polyurethane Foam Shall Be As Per Manufacturer Percent U2019s Specification. The Hardness Of Foam Shall Be 20 Kg On Hampden Machine And 25 Percent Compression And It Should Be Covered With Fabric As Per Manufacturer Percent U2019s Shade Card. Fabric Colour Shall Be Approved By Amm / Blc . Percent U2022 The Arms Of The Chairs Should Be Black As Per Manufacturer Specification. Percent U2022 The Gas Lift Mechanism Should Be Tested As Per Bifma X 05.01.2002 Standards. Percent U2022 The Tilting Mechanism Should Be Synchro-Tilt Mechanism As Per International Ergonomics Standards Any Position Locking . Percent U2022 The Pedestal Should Be Five Legged Injection Moulded In Black 30 Percent Glass Percent U2013filled Nylon And Fitted With 5 Nos Twin Wheel Castors. The Castors Of The Chairs Should Be Glass Filled, Twin Wheel Castors Confirming To Bifma Standards X 05.01.2002 Tested To Perform 1, 00, 000 Cycles With 225 Lbs Load. Percent U2022 Fabric Colour Shall Be Approved By Amm / Blc Percent U2022 Overall Height Of Chair Should Be Minimum 1225 Mm Inclusive Of Maximum Adjustment Of Gas Lift Mechanism Percent U2022 All Material Should Be Used Of Relevant Isi Specification Note: Tenderers Are Requested To Juxtapose Specification And Sketch Of Chair And In Case Of Variation They Are Supposed To Mention Their Offer.

Refer document

Refer document

Refer document