Machinery and Tools, Manufacturing Machinery, Machine Tools-Karnataka

Supply Of Tools And Equipments For Cnc Turning Centre Trade At Govt Iti Channagiri - 1 Cnc Turning Centre 1.Work Area A.Swing Over Bed - Not Less Than 400 Mm B.Swing Over Saddle / Carriage -Not Less Than 200 Mm C.Maximum Turning Dia.- Not Less Than 200 Mm D.Maximum Turning Length- Not Less Than 300 Mm 2.Traverse A.X Axis Travel- Not Less Than 140 Mm B.Y Axis Travel- Not Less Than 300 Mm 3.Main Spindle A.Spindle Nose- A2-5 Or Better B.Spindle Bore- Not Less Than Dia. 40 Mm C.Chuck Size- At Least 160 Mm 4.Spindle Drive A.Spindle Motor Rated Power - At Least 5 / 7 Kw ( Continuous / 15 Min. ) B.Speed Range- Up To 4000 Rpm 5Automatic Tool Turret A.Number To Tool Stations- At Least 8 Stations B.Max. Boring Bar Dia.- Not Less Than 32 Mm C.Tool Cross Section- Not Below 25 X 25 Mm 6.Tailstock A.Quill Diameter - Not Less Than 50 Mm B.Quill Stroke - Not Less Than 75 Mm C.Taper Of Quill D.Thrust ( Adjustable ) Max. - At Least 300 Kgf E.Tailstock Base Travel - At Least 130 Mm 7.Control System A.Controller- Fanuc-Oi-Mate Td Or Better / Siemens 810D Or Better 8.Feed System A.Rapid Traverse X-Axis - At Least 20 M / Min B.Rapid Traverse Z-Axis - At Least 20 M / Min 9.Standard Feature A. Machine Bed- Slant Type : Manufactured With Cast Iron With Suitable Grade And Must Fulfil The Oem Standard B.Linear Guide Ways : To Be Manufactured With Steel And To Be Hardened And Ground C.Chuck / Collet Closer Foot Switch D.Chip Conveyor Interface E.Software For Visual Programming F.Ac Unit For Electrical Panel G.Tail Stock With Live Centre H.Work Piece Clamping : Hydraulic / Pneumatic I.Coolant System J.Built In Lighting System K.Graphic Tool Path Display L.I / O Interface Rs-232 Port And Usb Port M.Flash Card Memory Facility N.Electronic Hand Wheel 10.Standard Accessories And Services ( To Be Supplied With Machine ) A.Od Turning Tool Holders : 5 Nos. B.Od Threading Tool Holders :3 Nos. C.Id Threading ( Dia. 25-50 Mm ) -2 Nos. D.Boring Tool Holder -20-50 Mm E.Face Grooving Tool Holder - Outer Dia. 50 Mm F.Od Grooving Tool Holder-3 Nos. G.Parting Tool ( 4 Mm And 3 Mm ) - 2 Nos. H.Precision Drill Chuck-6-13.5 Mm I. 3 Jaw Chuck – 200 Mmm With Soft And Hard Jaws- 1 No. Soft Jaws - 1 Set Hard Jaws - 1 Set J Chip Tray - 1 No K .Levelling Screws And Levelling Pads- 1 Set L. Machine Lamp – 1 No M.Machine Operating And Programming Manual- 2 Sets N.Installation, Maintenance And Spare Part Manual-2 Sets O.Packing Box Suitable For Transportation Within India- 1 Set P. One Week Training ( Onsite Post Commissioning ) Q. Accuracy Chart – 1 Set R.Spares And Consumable ( For 1 Year ) - 1 Set 11.General A.Warranty : At Least 1 Year B.Amc :-Amc Rates Post Warranty To Be Quoted Separately In Commercial Bid And Agreed Upon In Compliance Matrix C.Machine Encloser:- Machine Should Be Fully Enclosed To Avoid Spillage Of Coolant And Should Be As Per Oem Standard D.Communication: Machine Should Be Supplied With Dnc Cable ( Rs 232 To Com Port ) E.Controller Storage Features : Controller Should Have The Facility To Store The Programs Through Pen Drive / Flash Card F. ( 15 Kva ) 300-460V Consul / Farmax / Servomax Make

INR 550 /-

INR 44000.0 /-

Refer document