Construction, Road Construction, Road Work, Services, Painting Work, Painting, Chemical Oil and Gas, Wax and Oil, Bitumen Emulsion, Chemical Industry, Greases, Lubricants Supply, Lubricating Oils, Machinery and Tools, Building Machinery, Earth Moving Mach, New Delhi-Delhi

Tender For Execution Of Complete Work: 1. Painting Road Surface Marking With Adequate Nos Of Coats To Give Uniform Finish With Ready Mixed Road Marking Paint Conforming To Is : 164, On Bituminous Surface In White/Yellow Shade, Including Cleaning The Surface Of All Dirt, Scales, Oil, Grease And Foreign Material Etc. Complete Old Work (One Or More Coats) 2. Surface Dressing On Old Surface With Hot Bitumen Of Grade Vg - 10 Of Approved Quality Using 1.95 Kg Of Bitumen Per Sqm With 1.50 Cum Of Stone Chippings 11.2 Mm Nominal Size Per 100 Sqm Of Road Surface, Including Consolidation With Road Roller Of 6 To 8 Tonne Capacity, Etc. Complete. 3. Providing And Laying Bituminous Concrete Using Crushed Stone Aggregates Of Specified Grading, Premixed With Bituminous Binder And Filler, Transporting The Hot Mix To Work Site By Tippers, Laying With Paver Finisher Equiped With Electronic Sensor To The Required Grade, Level And Alignment And Rolling With Smooth Wheeled, Vibratory And Tandem Rollers To Achieve The Desired Compaction And Density As Per Specification, Complete And As Per Directions Of Engineer-In-Charge. 40/50 Mm Compacted Thickness With Bitumen Of Grade Vg-30 @5.5Perc. (Percentage By Weight Of Total Mix) And Lime Filler @ 3Perc. (Percentage By Weight Of Aggregate) Prepared In Batch Type Hot Mix Plant Of 100-120 Tph Capacity 4. Providing And Laying Bitumen Mastic Wearing Course (As Per Specifications) With Industrial Bitumen Of Grade 85/25 Conforming To Is : 702, Prepared By Using Mastic Cooker And Laid To Required Level And Slope, Including Providing Antiskid Surface With Bitumen Precoated Fine Grained Hard Stone Chipping Of Approved Size At The Rate Of 0.005 Cum Per 10 Sqm And At Approximate Spacing Of 10 Cm Centre To Centre In Both Directions, Pressed Into Surfaceprotruding 1 Mm To 4 Mm Over Mastic Surface, Including Cleaning The Surface, Removal Of Debris Etc. All Complete. (Considering Bitumen Using 10.2Perc. As Per Morth Specification). 40 Mm Thick 5. Providing And Laying In Position Cement Concrete Of Specified Grade Excluding The Cost Of Centering And Shuttering - All Work Up To Plinth Level :1:5:10 (1 Cement : 5 Fine Sand : 10 Graded Stone Aggregate 40 Mm Nominal Size) 6. Providing And Applying 2.5 Mm Thick Road Marking Strips (Retroreflective) Of Specified Shade/ Colour Using Hot Thermoplastic Material By Fully/ Semi Automatic Thermoplastic Paint Applicator Machine Fitted With Profile Shoe, Glass Beads Dispenser, Propane Tank Heater And Profile Shoe Heater, Driven By Experienced Operator On Road Surface Including Cost Of Material, Labour ,T&P, Cleaning The Road Surface Of All Dirt, Seals, Oil, Grease And Foreign Material Etc. Complete As Per Direction Of Engineer-In-Charge And Accordance With Applicable Specifications.

INR 500 /-

INR 87745.0 /-

INR 43.87 Lakhs /-