Supply Of 237 Types Of Items - Bitumen Pellet To Deginer Ref.No- 155-1090,Dc No.36524-A,Dt.11.02.99.[Material: Bitumen To Specn:1.Softening Point :110 To 115 Deg.Centigrade 2.Penetation : 10-15 3.Specific Gravity:1.02 4.Ductility At 27 Deg.Centigrade :2 5.Loss On Heating : 0.3% 6.Flash Point : Above 200 Deg.Centigrade 7.Solubility In Cs2 :99 % Paint Readymixed(Middle Buff) Air Drying Semi Glossy,Type-Brus Hing Consistency To Specn:Is-168 -Reaffirmed 2002 Applicable For Defence Use & Colour Shade Isc No.359 Of Is: 5-2007(6Th Revision) Ammendment No.1. (To Be Supplied In 5 Ltrs Pack) X-Ray Film Roll,Width-17X 200 Feet Length, Film Speed-100. Dimension Of Paper Cylinder On Which Films To Be Rolled: Id = 77+/-2.0 Mm, Od = 90.0 Mm Max., Length = 430+/-10.0 Mm And Overall Od Of X-Ray Film Roll = 150Mm Max. Pad Felt(D-45,+/-1Mm,T-6.4+/-0.65Mm To Drg.No.155-1080,Dc No.36792-A,Dt.01.11.2001 Mop.12 Shells 155Mm B/T On Pellet Without Grumet To Drg.No:155-1000(M)(Unit Load) Consisting Of Pallet To Drg.No.155-1210(M), Frame Assembly To Drg.No.155- 1230(M) Dcno.37126-A,Dt.25.7.07. Washer To Drg No.155-1120,Dc No- 36792-A,Dt.01.11.2001 Liner Exploder Cavity To Drg.No.155 -1070.Dc No.36792-A,Dt.01.11.01.(Special Requirement: Height Should Be 33.7-0.5 Mm ) Scuff Protector To Drg.No:155-1110 Dc No.37025-A,Dt.08.08.05. Paranitro Tolune To Specn.Ind/Me/ 962(Prov)Dc-3284-Me,Dt-21.02.95. Grummet Assy Consisting Of (1)Grummet 155Mm (2) Ring (3) Pin Assembly For Shell 155Mm Erfb/Bb & Bt To Designers Ref.No:04-13-2452-148. (Ref.Ofbl Drg.No:Bl/Pb/U-5/343). Obturator To Designer Ref.No.155- 1140,Dc No.37025-A,Dt.08.08.2005. Top Plug To Ofaj Drg.No:S-78C (Ref. Drg.No.4079922,Dc No.36817-A,Dt.08.03.2002,Duly Surface Treated As Per Drg.No.5191819,Dc No.34810-A, Dt.05.03.90 (Prf For 155Mm M-107 M77b ) Box Unit Load For 155Mm Shell M107 To Drg.No.3058086,With Latest Dc(I) 36820-A, Dt.16.03.2002 High Tensile Steel Strap To Is:5872 -1990,Grade-1,Suitably Blued Or Rust Proofed (Size:19.05Mm Width X 0.63Mm Thick) Note:Maximum Outer Diameter Of The Roll=600Mm, Inner Diameter Of The Roll=300+10Mm,Weight Of One Roll = 50 Kgs Maximum And Maximum Number Of Layers In One Roll=02. Capsule To Drg.No-6387453,Dc.No- 36490-A,Dt.19.11.98 Pad To Drg.6387456 ,Dc.No-36569-A,Dt -22.06.99,For 155Mm Shell M107(Size-45Mm Dia X 10Mm Thick) Orthoxylene To Is:359-1965 Amendment 1 & 2 (Ra-1993) Felt Disc To Drg.No-6387455,Dc.No- 36569-A, Dt-22.06.99. Aluminium Disc To Drg.No-6387457,Dc.No-36490- A, Dt-19.11.98. Liner To Drg.No.5173961,Dc:36490-A Dt-19.11.98(Is:737-1974,Gr.19000 In `Ocondition. Seal To Drg No.6390155,Dc No.35565- A,Dt.28.08.93 For Sealing Of Steel Strap Of Size:19.05Mm(W) X 0.63Mm Thick. Paint R/M Airdrying Matt Orthoxylen E Based Zinc Chrome Red Oxide To Specn. Ind/Me/964 (Prov),Dci 3214-Me,Dt-14.12.94,Mode Of Application-Spraying/Brushing/ Dipping/Pour,For Inner Coating Of He.Shell.[To Be Supplied In 500Ml Pack] Additional Requirement:-The Enclosed Test Parameters To Be Ensured,By Testing The Advance Sample Before Bulk Supply.There Will Be A Comparative Test Of Advance Sa Mple & That Of The Sample Drawn From The Bulk Supply In Case Of Advance Sample Is Accepted. Barytes(Type-2)To Jss:6810-51:2013 Rev-3 Dc.No.5195-Me,Dt.19.03.14. Mineral Jelly To Jss-8030-09:2002, With Latest Dc(I) No.3744-Me Paraffin Wax Special To Jss-9160-06 -2002, Rev-2 Ref-2011 Kaoline To Jss-9620-02:2001,Dc No. 3509-Me,Dtd.09.04.98. Tape Webbing Cotton Proofed,Size-25 +/-1.6Mm Wide X 1.00+/-0.1Mm Thick To Specn:Jss:8305-18-2013 Rev-3, Dc No.:5134-Me, Dt.25.05.2013. Note:-Breaking Load 120Kg Minimum As Per Special Requirement Polythene Bag To Drg.Cia/Amn/2185, Det.No-10,Part No.Isv-1627,Dc No.36832-A Dtd.10.5.02. Material Low Density Polyethylene Type-1 To Specn:Jss-9330-03:1995 (Rev.No.1) Dc No.3490-Me,Dt.14.01.98, Size-1170Mm X 300Mm X 0.5 Mm Thick. Case To Drg.Part No.Qx-172,Dc No. 35639-A Dt.28.12.93, Material Specn:Copper Alloy Strip To Is:3167-1982 (First Revesion)(Ra 1988)With Hardness 55 To 75 Vpn) Strengthened Cover To Drg.3-022483 /54-Bh-482/12,Dc No.36134-A,Dt.4.07.96 Disc To Part No.Qx-41Af,Item No:2 Material Specn:Lead Tin Foilto Jss:9535-06- 2010(Rev.No-2), Dc No:4085-Me, Dtd.08.09.2010(For Cap 78G). Note:Top Of The Tin Foil Disc To Be Coated With Varnish Shellac. Alu.Powder(Heavy)Gr.1,Sieve Size- 250 Micron, Density-1.0 G/Cc(Min)To Specn:Jss:1370- 03-2014, Rev-3, Dc No:5297-Me,Dt.16.12.2014 (To Be Packed In 50Kg Aluminium Container) Apc-7[Luting Mk-6 Ammn.(Rd-1178)]To Specn:Jss-8030-19:2003(Revision-1) With Latest Dc(I) 3821 Me, Dt.02.03.2004. Normal Cover To Drg.3-022483/54-Bh- 482/Cd18,Dc No.36134-A,Dtd.04.07.96 Paint Readymixed(Olive Green)Quick Drying Matt Finish For General Purpose Of Is- 220 Of Is-5-19 94 (Fourth Revision) Amendment No.1 To Specn:Is-168-1993(3Rd Rev.) Mode Of Application-Spraying,As Applicable For Defence Use.(To Be Supplied In 1- Ltr Pack). Sleeve Magazine To Drg.No.Arde-2028 Part No.Iqx-831,Dc No.36785 Cylinder To Drg.No.Bl/Cd/Cc-130/035 Dt.16.04.2001. (Ref.Drg.No:3-022483/54-Bh-482/13, Dc No:36134-A,Dt.04.07.96 Note:To Be Supplied As Per Small Cylinder Of Size:Lenth:50Mm X Id:115Mm. Lead Seal, 12Mm Dia.Of Good Commer- Cial Quality X-Ray Chemicals Comprising Of Auto Processor Developer And Auto Processor Fixer For Industrial Use(To Be Supplied As A Set For Preparing Homogenous Solution Of 20 Litres Developer And 25 Litres Fixer And Details Of Constituents To Be Mentioned). Tape Cotton Medium Proofed Size:25 Mm Wide +/- 2.5Mm To Specn: Ind/Me/888(Prov) Dc No-3754-Me Dt.12.12.2002. Paint Readymixed(Signal Red)Air Dry -Ing Marking Gloss Value 31 To 50 At 45 Degree For Package & Petrol Containers Isc-537 Of Is:5-1994 (Fourth Revision) Amm - Endment No.1,Specn.Is:138-1992(3Rd.Rev.)Mode Of Application -Stencilling.As Applicable For Defence Use (To Be Supplied In 500Ml Pack). Paint Readymixed Marking White, Type-Stencilling,Finish-Smooth,Semi Glossy To Specn:Is.138- 1992(3Rd Rev.) (To Be Supplied In 500Ml Pack) Paint Readymixed Black,Air Drying Marking Gloss Value 31 To 50At 45 Degree To Specn:Is-138- 1992(3Rd Rev.) For Defence Use,Mode Of Application:Stencill- Ing (To Be Supplied In 500 Ml Pack). Disc To Drg.No.2-013535/53-00-482M/ 14, Dc No.36785-A,Dt.08.10.2001. Primer Percussion,Q.F Cartgs.18A (Empty)To Drg.Part No Iqx-51Ge,Dc-36506- A,Dt.23.12.98 With Body And Magazine Separately (With Out Assembled Condition) Disc,Pwf 12.7Mm Dai,To Specn:Jss- 9310-06;2002,Dc No:3738-Me,17.09.2002,As Per Drg.No.Iqx-144- Gf,Item No.4. Paint R/M Air Drying Sgf Blue Azure Isc 104 Of Is:5 Of 1978,Specn:Is-168-1993 With Amendment No. 1 And 2.Mode Of Application-Brushing. Gi.Wire,20Swg Soft Galvanised Steel To Is:280-1978(3Rd Rev.). Paint R.Mixed Marking Golden Yellow Isc-356 Of Is 5-1994 To Specn:Is-138-1992(3Rd Rev.) For Packages,Mode Of Application-Stencilling. [To Be Supplied In 500Ml Pack] Paint R/M Light Brunswick Green Air Drying Matt Finish For General Purpose Isc- 225 Of Is:5- 1994(4Th Revision)(Amdt.No.1)To Specn:Is:168-1993(3Rd Rev.) As Applicable For Defence Use.Mode Of Application-Spraying/ Brushing. Apc-2(Cement Rd-1192K) To Jss-8030- 14,1999(Rev-2),Dc No.4054-Me,Dt.08.01.10,Cat No.8030- 000-027 [To Be Supplied In 500Gram Pack] Apc-12(Grease Ammn.)To Specn.No.Jss -9150-45:2013,Rev-3 Dc.5204 Me Dt.12.04.14 Aluminium Powder(Light)Gr.1 To Spcn Jss:1370-04-2002,Dc No.3798-Me,03.02.2004. (Sieve Size:- 125 Micron 98 +/- 2% ) Board Glazed Calendered Ammunition To Specn:Jss:8135-13:1998,Dc-3554- Me,Dt.12.03.1999. Size:-700 X 525 X 0.64 +/- 0.13 Mm. Gun Powder G-7 To Specn:Jss:1376-05 -1994,Revsion No-1,Dc No.3793-Me,Dtd.28.10.2003. Paper Carton Board To Jss:8135-15- 2000,Rev.No.1 Dc No.3659 Me,Dt.8.1.2001,With Cupping Quality Size:760Mm*890Mm*0.762Mm Thick. Barium Nitrate,Gr.1 To Jss:6810-59 -2010(Rev.No.3),Dc No-3683-Me,Dt.19.03.01 With Ammendment List No.1, (Sieve Size:-Minimum 97+/-3 % Passing Through 125 Micron Is Sieve) Pellet Covering To Drg. Cia/Amn/ 1901 Det.4, Part No: Iqx 785 For Pellet Smoke , 42.5 Gram, Tnt/Al-70/30 To Drg. Cia/Amn/1901 Dci 35462-A Dt.03.03.93 Plywood 6 Mm(+/-6%) Thickness Of Size:(8X4) Mr Grade,Type:Ab,Branded Quality To Specn. Is:303(Latest Issue). Ammn.Container 39 A/L Drg.Part No- Isv-414 A, Dc No-36411-A Dt.23.04.98, Specn:Cqa(A) 2805 (H) Dc:36145-A . Paper Wrapping Waxed Kraft Ammn. (Brown) To Spec.Jss-8135-05:2013(Rev 4), Dc No.5186-Me, Dt.19.03.2014 Size:482*635*0.15 To 0.18 Mm (T). Disc Paper White Fine , 30.99Mm Dia Material:-Paper White Fine Ammn.To Jss:9310- 06:2002, Dc:3738- Me,Dt.17.09.2002 Reaffirmed 2011 Substance-42-46 Gsm) For Ce Pellet Mk 1/1/L, 53.16 Gram To Drg. No.Sx 12 Af. Washer Felt Soft(Proofed)Od:63.5Mm Id:35.6Mm,3Mm Thick To Specn:Is:1719-1988(A2) Waxed And Inse Rted Whilst Hot Alternatively Composition Rd 1074 Or Rd 1064 Ref.Drg.No.Cia/Amn/2176,Part No:Isx 77 Gf,Item No-4 Dc: 37013-A Dt.06.05.2005. Felt Disc Soft(Proofed)Dia:31.75Mm X 6 Mm Thick To Specn:Is:1719-2000, Ref.Drg.No: Cia/Amn/2176 Part No.Isx 77 Gf,Item No-8. Dc:37013-A Dt.06.05.2005. Disc,45.2Mm Dia, Paper White Mill Board Disc To Size:93Mm Dia X 3Mm Thick (Waxed),Drg.No:Cia/Amn/2650,Drg.Part No.Isv-482 Ga Dc No.37330-A,Dt.04.02.2013 Material:Mill Board To Jss:9310-01-2014-Rev-3 Dc-5290 Me Dt.04.02.2013. Tube,Paper To Drg.No.Isx 18 Sa Designers Ref No-Cia/Amn/1900. Dci 35462-A Dt.03.03.93 . Washer Leather Lubricated,Od:59.69 Mm,Id:48.26Mm,Thickness:2.03Mm,Ref.Drg.No:Isx- 343,Ds Cat No- 5330-003641. Dci 36265-A Dt.02.04.97. Disc Cloth,Size:31.75Mm Dia X 1.14 Mm Thick, Cloth All Wool(Melton Finish)To Specn: Jss:8305-16: (Rev.2) Or Cloth Colar,White To Specn:Jss:8305-21:2013 Rev.3 Ref.Drg.Cia/Amn/2176,Part No-Isx 77 Gf,Item No-11.Dc:37013A, Dt.06.05.2005. Zinc Stearate To Jss-6810-133:2001 Dci 3717 Me,Dt.16.01.2002. Disc To Drg. Cia/Amn/1901 Detail.2 Part No: Iqx-783 For Pelletsmoke, 42.5 Gram, Tnt/Al70/30 To Drg. Cia/Amn/1901 Dci 35462-A Dt.3.3.93. [Material:Paper White Fine To Specn.Jss 9310-06:2002 Reaffir Med 2011] Disc Dia. 32.25Mm X 0.5Mm Thick Glazed Board To Spec. Jss:8135-13:1998,Rev-1,Dc:3554-Me, Dt.12.03.1999 Pa 1992 Waxed (Ref: Designers Ref. No.Cia/Amn/ 2176,Part No.Isx-77Gf, Item No-9 Dc:37013-A,Dt.06.05.2005) Disc Paper Wrapping Hard, 30.99 Mm Dia. Material-Paper Craft Ammn. To Specification Jss:8135 -017:2010,Dc-5016-Me Dt.16.03.2011 For Ce Pellet (Mk 1/1/L, 53.16 Gram) To Drg. No.Sx 12 Af. Dc No.35452-A Dt.07.09.93. Carton Empty To Design. Ref. No. S.Detail. 1852 Dc No.30102-Adt.11.01.75 For Ce Pellet (Mk 1/1/L, 53.16 Gm) To Drg.No. Sx 12 Af. Dc No.35462-A Dt.07.09.93. Graphite Powder Sulpher Free(90 Mic -Ron)To Jss-9620-01 With Latest Dc(I)3686- Me,Dt.3.7.2001. Apc-11(Cement Rd-1154) To Spec.Jss- 8030-24:2011,Revision No.2,Dc No 3821-Me Dt 02-09- 2004. Shell 105Mm Ifg He A/L Forged Steel To Drg.Part No.Isx-46Ge Sheet-1 Dc No.36045-A, Dt.29.11.95 & Sheet-2 Dc No.36784-A,Dt.20.09.2001. Silver Nitrate (Pure Grade) To Is:2214. Make:Glaxo/E.Merck. Ammn.Container 40A/L To Drg.Part No Isv-415A,Dc No:35975-A Dt.14.07.95 Specn:Cqa(A) 2805 (H), Dc No.36145-A . Primer Electric Ia_/L/Empty To Cqa (A) Drg.Part No.Iqx 46Ge,Dcno.36662-A, Dt.23.03.2000. Disc Pwf(0.79) 20.07Mm Dia,0.051Mm Thick To Specn :Jss:9310-06:2002 Reaffirmed 2011 Designers Ref.No.Cia/Amn/1435,Part No:Iqx 136 Dc.No.36123-A Dt.06.06. 96.Gf.Item No.3 Apc-103 (Varnish Rd-1198-B) To Specn:Ind-Me-368(C),Dc No:3754-Me,Dt.12.12.2002. Collar To Drg.Part No.Isv-1376, Dc No.34844-A Dt.09.04.90 Disc(Waxed)128Mm Dia X 6 Mm Thick Waxed Item No-5 To Part No.Isv-338 Ga. Dci 35574-A Dt.3.9.93 Material-Mill Board To Spec Jss 9310-01-1994 Rev-1 Dc.3279-Me 21.02.95 Composition Sr-227A To Specn:L 9620 B(A),Supersedes L-8971 Tape Adhesive Water Proof Fabric Base To Size:-50Mm Wide,Colour Black Specn.Ind/Me/790(A) Dc No.3754-Me,Dt.12.12.2002 (Each Roll Of 50 Mtrs.) Disc(Waxed)86Mm Dia X6mm Thick Waxed Item No-4 To Drg Part No:Isv-483 Ga. Dci No. 35983-A Dt.29.7.95 Material:Mill Board To Jss:9310-01-1994, Dc No:3279-Me Dt.21.02.1995. Paper White Fine,Size:L-762 X W-508 (Mm),Substance 42-46 Grram/Sq.Metre To Specn.Jss-9310-06: 2002,Dc No:3738-Me,Dt.17.09.2002 (Reaffirmed 2011) Disc Paper White To Drg.No-Qx-1534 D.C. No.36123A Dated:06.06.96 Apc-5(Cement Rd-1286)To Jss-8030-20 :2009(Rev-3) Dc No-4051-Me,Dt.08.01.2010 [To Be Supplied In 500Gram Pack] Mill Board,Size-787X558x2.5Mm(T) To Specn.Jss-9310-01:1994,Dci-3279 Me Dt-21.02.1995. With Cupping Quality.As Per Drg.No.Irw145(Cup) Dc No.36005-A Dt.18.09.95. Gun Powder(G-12)To Jss:1376-05:2005 Revision No.2. Cloth Cambric Cotton Bleached Undye Size-1143Mm Width To Is:5088-1982, Verity No-2 With Ammnd. No-1 May 1985 & Ammendment No-2 Oct.1996. Disc 109Mm Dia X 6Mm Thick Waxed Item No-06 To Drg Part No.Isv-483 Ga. Dci 35983-A Dt.29.07.95 Washer For Fuze Da 5A,Drg.No.Qx176 Fd-650, Dc-35781-A Dt.22.08.94. Dye Rhodamine B To Jss-6820-03: 2000(Rev.1),Dc No.3645-Me,Dt.18.9.2000. Cup To Drg.No.Arde 2043 Det.No.5 Part No.Isv-1764 Dc No.36356-A, Specn.No.Cqa(A) 2804(M) Dc No.36202-A. Glazed Board Washer To Drg.No.Fd672 To Drg. Part No.Qx-175, Dcno.36103-A Dt.29.03.96. Strip Paper White Fine (55X33) Mm Material:Paper White Fine 42-46 Gsm To Specn.Jss- 9310-06: 2002 (Reaffirmed 2011). Disc To Drg.No.Fd 537 To Drg. Part No.Qx-324, Dc-36103-A Dt.29.3.96. Fuze Da5a (Empty) For 51Mm Mortar Bomb, Iqx 79 Ge To Dc 37263-A Dt.26.08.2010. Aluminium Strip Size:0.51+/-0.01(T) 22+/-0.1 Mm(W) To Specn.Is:737-1986(3Rd Revision) Gr.19000, Condition O. Ring To Drg.No.1933 Det.No.6 To Pt. Itv 172.Dc-36529-A Dt.18-02-99. Bag 3 A/L Canvas For Ammn.Container Assembly 148 A To Drg.No.Arde-2125 Det No.1 Pt.No.Isv 532A Dc(I) 36238-A Dt.13.02.97 Pad Shoulder For Bag 3A Part No. Isv 266 Sa Dc 35469-A. Strap I/Isv 104 Sa Dc-35771-A Strap Ii/Isv 105 Sa Dc-35771-A And Link Isv 1528 Dc- 36268-A Dt.03. 04.97. Ammunition Container Box B-9A Steel To Designers Ref:Arde-2174, Sheet No.3 Part No.Isv 553A, Dc 35907-A, Specn Ia 1169(N) Dc 35576-A Boxes To Be Painted As Per Drg. With Paint Of Shade Olive Green(Isc 220) Of Is:5-2007 With 6Th Revision To Specn.Is:168-1993 3Rd R Application Of Prime-Coat Of Red Oxide. Cap Complete(3 G Cap Empty) To Ref. No.Dd(L)17235 For Cartg. 3G/51Mm,Sheet-1 Dc- 36972-A, Dt.27.07.04,Sheet-2 Dc 35540-A Dt.16.07.93. Container To Arde-1933,Det-4,Pt.No. Itv 170, Dc No.36207-A, Dt.02-12-96 Specn. Cqa(A)- 2322(G) Dc 37193-A. End Packing Pieces,(230X335x20)Mm Material:Expanded Polystyrene Foam Having Average 18-25 Kg/ Cubic Metre To Specn.Is:4671-1984(Ist Rev.Type-2) Or Polythene Foam To Average Density 20-30 Kg/Cubic Metre. (Ref.Drg.No.Arde 2174 Part No.Isv 514 Ga, Dc No.35964 A,Dtd. 31.05.95.) Ammunition Container 69A/L,Plastic To Drg. No.Arde-2125, Det No.3 Part No.Isv 533 A, Dc 36469-A Specn No.Cqa(A) 2804(M) Dc 36202-A. Packing Plywood/Corrugat Ed Boxes Duly Tape Banded (Max. 50 Cont. Per Box). Felt Disc(Small)Size:26Mm Dia X 3Mm Thick To Specn.Is:1719:2000(4Rd Revision Amendment-1) White Pressed Proofed. Separator Of Poly Foam(278X190x6)Mm Material:Expanded Polystyrene Foam Having Average 18-25 Kg/ Cubic Metre To Specn.Is:4671-1984(Ist Rev.Type-2) (Ref.Drg.No.Arde 2174 Partno.Isv 514 Ga, Dc No.35964 A,Dtd. 31.05.95) Adhesive Tape Wp Fabric-25Mm Disc Polythene O.D-55Mm X 3Mm Thick X Ray Film Sheet 30 Cm X 40 Cm Industrial Interleaved,100Speed,High Contrast,Astm Cl.2 Technical Requirements: The Film Will Be Used For X-Raying High Caliber He Filled Shells.Film Should Be Able To Detect Filling Defect Such As Porosity,Cavity,Piping & Cracks Of Minimum 0.1 Sq.Mm With Energy Sources 320 Kv,2 Mev,4 Mev & 6 Mev With X-Ray Film Auto Processor. Hardner Eh 411 Or 408 (To Be Supplied In 01 Kg Pack). Centering Bit(Lead Washer) To Irw- 204-Det No.4, Arde-1934, Dcno.35466-A. Apc-216(Compo. Sealing Rd-1229)To Specn.Jss-8010-51,With Latest Dc(I) Container With Disc Closing To Drg. No.Arde-1935, Det No.1 Part No.Itv 28A Sheet-1 To Dc.36747-A Dt.9-03-2001,Sheet-2 Dc-35684-A Dt.06-04-94 To Specn.Cqa(A) 2303(F) Disc Polythene Od 55X6mm Thick. Loctite-271 (Adhesive Anaerobic) Apc-221 To Jss:8010-28:2010 Rev-2 Fire Transmitting Tubes Mkg.51Mm Ct To Arde-1934, Irw 203. Dcno.37068-A Dt.14.09.2006. Celluloid Sheet Transparent To Size (610X1372x0.13)Mm To Specn.Jss-1375-03-1998, Rev.1,Dc No. 3536-Me,Dt.12.09.98. Carton Board Size(260X70x0.51)Mm To Jss 67-07:Apr 65.(One Sidewhite) Dc No.3253-Me Dt.14.01.95. Notched Coil To Arde 1933 Part Itv- 169 Detail No.3,Dc.36529-A,Dt.06.03.2008. Apc-201 To Specn.Jss-8010-63,1997 Dc No.3755-Me,Dt.12.12.2002 Felt Disc (Big) Size:35Mm Dia X 3Mm To Specn.Is:1719:1988(3Rd Revision Amendment-1) White Pressed Proofed. Apc-210(Nc Lacquer) To Jss-8010-64: 2009,Rev.2,Dc No.3981-Me,Dt-24.09.2009. Collar Nose To Drg.No.Part No - Isv 1942 Dc-36202-A Dt. 07-11-96 Bottom Packing Piece Of Size: ( 190 X 135 X 6 )Mm, Material Description :- Expanded Polystyrene Foam To Average Density 18 To 25 Kgs/Cubic Mtr To Spec:Is-4671-1984 (I St Rev.) Type-2. Board Glazed Ammn.914.4Mm X 304.8Mm X 0.508Mm To Specn.Jss:8135-13:1998,Dc No.3554- Me,Dt.12.3.99 Lead Tin Foil(For Disc Of 3 G Cap) To Drg. No.Dd(L)17235(Sheet-1) To Size:0.025 To 0.05Mm (T) X 14.5Mm (W) X 25M Length To Specn: Jss:9535-06-2010(Rev.2) 51Mm Mortar Bomb Body(Empty) To Pt. No.Itv 17 Sa (02 Sheets),Sheet No.01 Dc 37111-A Dt.21.05.07 & Sheet-2, Dc 37193-A Dt.13.11.08. Apc-211 To Jss:8010-63:2004 With Latest Dc(I) 3841-Me Dt.04.04.2005. Anvil For Cartg.3G/51Mm To Drg.No. Ddl-12002, Assy. Drg.Dd(L)17235 For 51Mm Mortar Bomb. Adhesive Synthetic To Specn.Ind/Me/ 788(D) Latest Dc.(To Supplied In 5 Kg Pack ) Cement Dobecot 520F Fabric Silk Fine,Unproofed & Undyed [Width:1.09 To 1.10 Mtrs]To Jss:8305-22/1994,Dc No.3289-Me, Dt-21.04.1995 (Gsm Of The Material Will Be Above 50.88 G Per Sq.Mtr.) Felt Jute,Size=290*200*5 To 6.3(Mm) Soft Quality To Specn.Ind/Me/889(Prov),Dc No.3176- Me, Dt.12/08/94. Disc D=18B7mm X 0.5 To 0.9 Mm Thick Material Specn.To Gost:21641-76 Or Mill Board To Jss-9310-01 :1994,Dc No.3279.Me Dt-21.2.95 Or Board Straw To Specn.Jss: 8135-11-1998 (Re Vision No.1) Dc No.3553-Me,Dt.12.3.99. As Per Drg.No.4-027043-3 Bpli 000,Dc No.34103-A Dt.28.07.87. Magnesium Powder Gr.B,Particle Size -(A) Retain On 30 Bss= Nil(B) Retain On 44 Bss=12- 15 % (C) Retain On 100 Bss= 80-85 % (D) Retain On 120 Bss=90-95 % (E) Retain On 150 Bss= 99.5 %, Apparent Density:0.8 To 0.85 G/Ml, Other Parameters Confirming To Is:2307- 1977(Ist Rev.) Felt Jute,Size=200*200*5 To 6.3(Mm) Soft Quality To Specn.Ind/Me/889(Prov),Dc No.3176- Me, Dt.12/08/94. Brass Strip To Size:18+/-0.2Mm(W)* 0.7+/-0.01Mm(T) To Bs:2870,Cz-106,1/4 Hard. Oxidization, Bend & Dent Mark Should Not Be Present In The Coil/Roll Surface [Packing Condition:Each Roll Of Strip Should Be Rapped With Proper Cotton Clothes Then In Polythene Pack And After That These Rolls Should Be Kept In Wooden Box With Proper Cushioning/ Support] Advance Sample=02 Kgs In Single Coil Form, Bulk To Be Supplied In 20 To 30 Kgs In Single Coil Form, Nabl Test Certificate Required. Lead Tin Foil,0.07Mm +/- 0.01Mm (T) X 14.5Mm(W) X 25 Metres Length To Specn.Jss:9535- 06:2000,Revision No.1,Dc No.3675-Me,Dt.08.03.2001. Paper Brown(Waxed),280*195(Mm) To Material Paper Wrapping Waxed Kraft Ammn.To Spec.Jss-8135-05 -1994,Dc No.3732-Me Dt.16.05.2002. Composition To-34 No.1 (Special Smo Ke Powder) To Specn.Gost-B-25490-82. Copper Strip To Size:13+/-0.2Mm(W)* 0.35+0.02Mm(T) Deep Drawing Quality To Bs:2870,1970,C-102, Condition O. Oxidization,Bend & Dent Mark Should Not Be Present In The Coil/Roll Surface[Packing Condition:Each Roll Of Strip Should Be Rapped With Proper Cotton Clothes Then In Polythene Pack And After That These Rolls Should Be Kept In Wooden Box With Proper Cushioning/ Support] Advance Sample=02 Kgs In Single Coil Form, Bulk To Be Supplied In 15 To 20 Kgs In Single Coil Form, Nabl Certificate Required. Rosin Gr.1 To Jss:6810-62:2000 Rev. No.2,Dc No.3663-Me,Dt.08.01.2001. Poly Acryl Amide(Polyelectrolyte & Is Used As Flocculation Additive For Cleaning Of Industrial Waste Water & Dewatering Of Sludge) With Following Specn.:- 1) Appearance:Large Grained Free Flowing Powder. (2) Water Solubility: Totally Soluble. (3) Viscosity As 0.25% Solution:About 120-210 Cps. (4) Molecular Weight: ~10 To The Power Six. (5) Ionogenic Properties: Strong Anionic. Aluminium Strip [Size:20+/-0.1(W) X 0.25+0.01 (T) Mm] To Is:737, Gr.19500, Condition H2. Oxidization,Bend & Dent Mark Should Not Be Present In The Coil/Roll Surface [Packing Condition:Each Roll Of Strip Should Be Rapped With Proper Cotton Clothes Then In Polythene Pack And After That These Rolls Should Be Kept In Wooden Box With Proper Cushioning/ Support] Advance Sample= 01 Kg In Single Coil Form, Bulk To Be Supplied In 15 To 20 Kgs In Single Coil Form, Nabl Test Certificate Required. Mill Board (Waxed) 200X200x2.5 (Mm) (End Support) Using Material Specn.Mill Board To Jss-9310-01 :1994 Dc No.3279-Me Dt.21.02.95 & Paraffin Wax Ammn.To Jss: 9160-09-2002 Dci 3708-Me Dt.17.06.2003 Nose Fuze Type A 670M (Empty) For 30Mm Bmp-Ii Ammn.To Cqa(A) Drg.No.Bw.3.140.039.Cb/C,Dc-34241-A,Dt.24.9.87(In Loosly Assembled Condition) Consisting Of Various Components As Per Enclosed List(Passed Proof). Programme And Test Procedure As Per Album No. D-2040,Sheet No.Bw.3.140.039 Ii M/C (12 Sheets) Dc-34241-A,Dt.24.09.87. Box H-60 Mki (India) To Drg.No. Arm 1253 D-1,Rev.No-6 Dt.27.06.96,Drg List No.Arm 1253 Sheet- 1 Revision No.7 Dt.01.08.96 Sheet-2 Rev-5 Dt.31.07.96 Sodium Azide To Jss-6810-79:2003, Dci 3794-Me/28.10.2003.(Reaffirmed -2011) Paper Tube(Ap/T)Id=17A5mm X Od=18.1 C5mm X L=19.5B8amm To Material Specn.Paper Craft Ammn.To Jss 8135-017:2002,Dc No.3731-Me,Dt-16.5.2002. Lead Acetate,Ar Grade Make:Glaxo Sq/Merck. Disc:Drg.9-04367/9- -104/ 38.366. 113,Dc.No.36309-A,Dt-14.07.97. Barium Peroxide Gr.I To Jss-6810-96 -2011-Rev-2 Admt-1 Dc No 5081 Me,Dt.06.08.2012. Apc-224(Shellac Varnish 20%) To Specn. No.Jss-8010-63:2012(Rev-3),Dc No.5101- E,Dt.21.12.12. [To Be Supplied In 01-Ltr Pack] Cap:Drg.9-04367/9- -104/ 38.320. 262-Dc.No.36309-A, Dt-14.07.97. Gasket To Drg.No.Bw 8.685.066(3- 0116278),Dci No.34183-A,Dt-28.7.87.Material Card Board To Spec.Gost-7933-75/Jss 8135-15:2000,Dc 3659 Me/8.1.2001. Cup:Drg.9-04367/9- -104/ 38.350. 189,Dc.No-36309-A,Dt.14.07.97 Miil Board (Waxed),290*200*2.5(Mm) (Top Support) Using Material Mill Board To Jss- 9310-01-1994 Dc No.3279-Me Dt.21.02.95 & Paraffin Wax Ammn.To Jss-9160-09 :2002 Dci:3708- Me Dt.17.06.2003. Potassium Perchlorate Powder To Jss-6810-58:2000(Rev.2) Dc No.3674,Dt.08.03.2001. Particlesize:- All To Pass Through 150 Micron Sieve & All To Retain On 75 Micron Sieve Of Is-460(Pt-I)1985 Third Revision Reaff- Irmed 1990. Rectified Spirit To Is:323-1959 Case:Drg.9-04367/9- -104/ 38.310. 032,Dc.No.36309-A,Dt.14.07.97. Body To Drg.No.9-04367/9- -104/ 38.300.150,Dc No.36396-A Dt-21.03.98. Aluminium Strip [Size:22+/-0.1(W) X 0.52+0.01(T) Mm] To Is:737, Gr 19500, Condition O. Oxidization,Bend & Dent Mark Should Not Be Present In The Coil/Roll Surface [Packing Condition:Each Roll Of Strip Should Be Rapped With Proper Cotton Clothes Then In Polythene Pack And After That These Rolls Should Be Kept In Wooden Box With Proper Cushioning/ Support] Advance Sample= 01 Kg In Single Coil Form, Bulk To Be Supplied In 10 To 15 Kgs In Single Coil Form, Nabl Test Certificate Required. Cupro Nickel Strip [Size:26-0.2 (W) Mm X 0.4+0.03 (T) Mm To Specn. Bs:2870-1980,Cn-104, Condition O. Oxidization,Bend & Dent Mark Should Not Be Present In The Coil/Roll Surface [Packing Condition:Each Roll Of Strip Should Be Rapped With Proper Cotton Clothes Then In Polythene Pack And After That These Rolls Should Be Kept In Wooden Box With Proper Cushioning/ Support] Advance Sample= 03 Kgs In Single Coil Form, Bulk To Be Supplied In 20 To 30 Kgs In Single Coil Form, Nabl Certificate Required. Antimony Sulphide [Black] In Lumps To Specn.Jss-6810-71:2008(Rev.No.3),Ds Cat No.6810- 000-920. Lead Ring To Drg.No.B Iii 8.249.034 Dc No.36310-A,Dt-14.07.97. Sleeve:Drg.9-04367/9- -104/ 38.316 .101,Dc.No.36309-A,Dt.14.07.97. De-Coppering Agent Wire 1.25,L=75+/ -2Mm To Drg.Bw 7.045-001 And Gost-5655-67 Or Indigenous Equi -Valent Material Lead Wire To Spec.No.Is:27-1992(Latest Rev) (To Be Suppliedin The Form Of A Ring As Per Assy. Drg.No. Bl/Cd/U-06/167). Gasket To Drg No.Bw8.685.066-01(3- 0116278),Dci No.34183-A,Dt-28.7.87.Material Wrapping Paper To Spec. Gost-8273-75,Gsm 60-120/Jss 8135-017:2002,Dc No. 3731-Me/16.05.2002 Magnesium Powder,Gr.C1, Apparent Density 0.4 To 0.5 G/Ml, Sieve Size: Retain On 210 Micron 0.5 % Max,150 Micron 7% Max,100 Micron Is Sieve 30% Min & 63 Micron 80% Min. Other Parameters Confirming To Is:2307-1977(Ist Rev.) Sodium Thiosulphate To Is:2211-1993 Make:E.Merck/Glaxo. Strontium Nitrate To Is:5671-1984 (Sieve Size:- Pass Through 60 Bss & Retain On 170 Bss) Sodium Aluminium Floride (Cryolite) To Jss-6810-73-2010 Rev-2. Barium Chromate To Specn.Ind/Me/794 (A),Dc.3298 Me,Dt.21.4.95(1) Apparent Density 0.55 To 0.65 G/Ml (2) Mean Diameter Of Particle 1.5 To 2.0 Micron. Cu.Strip,20+/-0.1(W)X 0.7+0.01(T)Mm To Bs:2870,1970,C-102,Condition O. Oxidization,Bend & Dent Mark Should Not Be Present In The Coil/Roll Surface [Packing Condition:Each Roll Of Strip Should Be Rapped With Proper Cotton Clothes Then In Polythene Pack And After That These Rolls Should Be Kept In Wooden Box With Proper Cushioning/ Support] Advance Sample=03 Kgs In Single Coil Form, Bulk To Be Supplied In 20 To 30 Kgs In Single Coil Form, Nabl Test Certificate Required. Paper Brown(Waxed),320*280(Mm) To Material Paper Wrapping Waxed Kraft Ammn.To Spec.Jss-8135-05 -1994,Dc No.3732-Me Dt.16.05.2002. Nitric Acid(Pure 69%)To Is:264-76 Make:Merck/Glaxo.(To Be Supplied In 2.5 Litres Pack) Graphite Powder Sulpher Free(45 Mic Ron)To Jss-9620-01,Dc No.3686-Me,Dt.03.07.2001 Lead Nitrate Sq/Ar Grade,Make:Loba/ E.Merck/Glaxo.(Refer Specn.Jss-6810-80/1993 Dc(I) No.3785 Me Dt.25.09.2003). Body With Band [For 30Mm Ap(T)] To Drg.No.Bw 5.500.113/C,Dc No.37321-A,Dt-18.10.12 [Using With Body (Alternative) To Drg.No.Bw 8.035.085/C Sheet 3 & 4 Dc No.34640-A,Dt- 9.6.89]. Ref:(1) Body With Assy. Drawing Bw 5.500.113 Cb/C Dc(1)-34183-A Dt.28.07.87(2) Body With Dri Prog & Test Procedure Bw 5.500.113 M/C Dc(1)34183-A Dt.28.07.87 Apc-217 To Jss-8010-42:1999 Rev.No- 2,Dc No.3865-Me,Dt.01.08.2005. Phenolic Resin Grade Tpr 109(Phenol Formal Dehyde Resin) To Specn.Jss-9330- 05:2002,Dc 3770-Me, 17.06.2003. Apc-219 To Jss-8010-48:2012 (Rev-2) Dc No.5095-Me,Dt-05.10.2012.(Orange & Red). Copper Strip To Size 10+/-0.2Mm(W)* 0.1+0.02Mm(T) Deep Drawing Quality To Bs:2870,1970,C-102, Condition 1/2 H.Oxidization,Bend & Dent Mark Should Not Be Present In The Coil/Roll Surface[Packing Condition:Each Roll Of Strip Should Be Rapped With Proper Cotton Clothes Then In Polythene Pack And After That These Rolls Should Be Kept In Wooden Box With Proper Cushioning/ Support] Advance Sample=0.5 Kg In Single Coil Form, Bulk To Be Supplied In 10 To 15 Kgs In Single Coil Form, Nabl Certificate Required. Mercury Metal(Pure)To Specn.Ind/Me/ 21(A),Dc No.2102.Me Dt.1.6.77.Make:Sq Glaxo Apc-225 To Specn:-Jss-8010-63:2004 (Revision No.2) Dc No.3841-Me,Dt.04.04.2005.(Shellac 30%). Potassium Chlorate Grade-1 To Specn.Is:708-1987(Second Revision)Reaffirmed 1998. Sleeve-B For Fuze Da5a To Drg.No. Cqa(A)/Amn/3493 Det.2.Isv-2230 Dc-37239A Dt.10.12.09 Sleeve-A For Fuze Da5a To Drg.No. Cqa(A)/Amn/3493 Det.1 Isv-2229 Dc-37239-A Dt.10.02.09 Box G-70 Mk-1(Steel)As Per Designer Ref.Dd(L) 12919,Part No.Sv68a Dc 37270- A,Dt.16.11.10. Mater Rust Proofing & Painting As Per Details In Drawing With Paint Of Olive Greenb Shade Isc-220 Of Is-5-2007 With Sixth Revision Amendment No.1 Specn.No.1A1169(N) Dc 35576-A. Disc For Fuze 162 Mark-8 & Da5a To Cqa(A)/Ammn/3042 Det.3 Part No.Isv-2018.Dc-36449-A Piece Packing Side 410 X 150 X 6 Mm Th (5 Ply) Item No 8 Pt No Isv-465 Ga Drg No Cqa(A)/Amn/2543 Sht-1 Dc-36814-A Dt.15-02-02 Piece Packing To Pt No Isv-1775 Drg No Cqa(A)/Amn/2543.Det-3.Dc No -34312-A Dt.30.01.88 Container 38B Drg.No-Cia/Amn/2008 & Drg. Pt.No-Isv-464-A,Dc-36787-A,Dt.15.10.01, Consisting Of (1).Body Drg.Part No-Isv-1557,Dc-36177-A,Dt.28.09.96 (2) Lid To Drg.Part No Isv-1558, Dc-36177-A,Dt:28.09.96.(3) Ring-A Drg.Part No.Isv-1559,Dc-35710-A. (4) Disc To Drg. No. Isv 2017 Dc No.36449-A,Dt.30.7.98.(5) Sleeve To Drg.No. Isv 2016, Dc 36449- A,Dt.30.7.98.(6) Disc To Drg.No.Isv 1353, Dc 35710-A,Dt.13.5.94. Piece Packing End To Pt No Isv-241 Sa Drg No Cqa(A)/Amn/2543.Dt-2 Dc.35099-A Dt.31-05-91 Piece Packing Top To Pt No Isv-240 Sa Drg No Cqa(A)/Amn/2543,Det-1.Dc-35099-A Dt.31-05- 91 Partition 410 X 45 X 3 Mm Th (5 Ply Item No 9 Pt No Isv-465 Gadesigner Ref Cqa/Amn/2543 Sheet-1 Dc No.36814-A Dt.15-02-02 Piece Packing Bottom B 448 X 165 X 6 Mm Th (5 Ply) Item No 7 Pt No Isv-465 Ga Drg No Cqa (A) /Amn/2543.Sheet-1 Dc-36814-A Dt.15.02.02 Piece Packing Bottom A Pt No Isv-242 Sa Drg No Cqa(A)/Amn/2543.Det-4.Dc No-35099-A Dt.31-05-91 Internal Fitments For Box M-41A(Woo Den) As Per Drg.No.Isv-302Sa Dc 37127-A Dt.30.07.07.[Each Set Consist Of(1)Top & Bottom Piece To Isv-2112=02 No(2)Side Piece(Big) To Isv 2113=02 No(3)Fuze Buffer Isv 2114=1No.Item 1 To 3 Dc No.36995 A Dt.13.1.05.(4)Key Slot To Isv 2115 Dc 37127-A Dt.30.7.07=1 No(5)Middle Partition Piece To Isv 2116 =1No(6) Side Piece (Small)To Isv 2117=4 Nos Dc 36995A,13.1.05. Raw Material:- Antistatic Polyethylene Foam Based Cushioning Material As Per Specn.Ind/Me/913(3) Prov 2004.Rev.No.1. Ammn.Container Box M 41A (Wood) To Drg.Pt.No.Isv 587 A,Dc.37127-A Dt.30.07.07. Fuze Antiremoval Mine At 2B Nd Empty To Drg.No.Arde-1553 Det No.1 Drg Pt No.Iqx-48 Ge Dc No.35703-A Dt.03.05.94 To Specn.Cqa (A) 1825 (C) Dc 36823-A Dt.20.03.02. Fuze Mine A/T 4A Nd(Empty Assembly) To Drg Pt No.Iqx-75 Ge Dc No.35879-A Dt.20.12.94 To Specn. No.Cqa(A) 1819(G) Dc 36823-A Dt.20.03.2002. [Refer Sub Assy Drgs (1) Fuze Mi Ne A/T 4A Nd(Empty Sub Assy) To Iqx 86A Dc No.35879-A Dt.20.12.94 (2) Housing Holder Detonator Assy To Iqx-60 Sa Dc No.35879-A Dt.20.12.94 (3) Stemming Holder To Iqx-61 Sa Dc No.35879-A Dt.20.12.94 (4) Magazine To Iqx-781 Dc No.35916-A Dt.21.02.95] Mine A/T 4D Nd (Empty Assembly) To Drg.Pt No.Itx-46A And Specn.Cqa(A) 1817(S) Dc No.36789-A,Dt. 22.10.01.[Refer Sub Assy Drg. Body Mine Itx-347,End Cap Itx 344,Plug Closing Bottom Itx 340,Plug Closing End Cap Itx 341 Housing Fuze Anti Removal Itx 345,Pin Locking End Cap Itx343 Transit Pin Locking Itx346,Plate Locking Itx286,Locking Scre W Itx287 & Spacer Pad Itx342] And Adapter Transit Assy.To Drg.Part No.Itx-35A,Dc 35916A,Dt.21.2.95 To Specn.Cqa(A)1817 (S)Dc 36789A,22.10.01.[Each Set Contains 01 No.Of Each Item] Polychloroprene Adhesive To Ind/Me/ 945(Prov),Dc No-2951-Me,Dt.02.02.1993. Strap To Drg Pt No.Isv-177Sa Dc No. 37127-A Dt.30.07.07. Material:- Tape Cotton Medium Proofed Size: 37Mm Wide X 880 Mm Long To Specn.Ind/Me/888(Prov) Dc 3754-Me Dt.12.12.2002. Steel Tape(Blued Or Suitably Rust Proofed) To Size:- 0.5 To 0.56Mm Thick & 13Mm Wide To Specn. Is:5872-1990. Box 7A(Plastic) To Drg.No. Isv 441A (Arde-1431),Dc No.35596A Dt.01.10.93. Key Ammunition 39A To Drg Part No. Iux 144A,Dc No.35916-A,Dt.21.02.95 To Specn.Cqa(A) 1817(S) Dc 36789-A,Dt.22.10.2001. Clips,25.41Mm(L)X13mm(W)X0.3Mm(T) Seal Tin(For Steel Tape Banding Size 13Mm Wide) Approx. Size 25.41Mm Length X 12.7Mm Width X 0.3Mm Thick And Band Of 90 Degree Angle Both Side Longitudinally With Height Ethylene Glycol (General Grade) To Specn. Is: 5295-1985 (First Revision) Reaffirmed- 2001. Cement Abs Specn.Ind/Me/890(Prov) Dc 3466-Me,Dt.22.9.97. Label Ia-992 Des.Ref.No. Ia-992 Material:-Pressure Sensitive Adhesive Pvc Tape 0.15Mm Thick Colour:-Black Specn. No.Is 13262:1992,Type 2, Pressure Pad Type A Assembly Part Itx 60 Sa Dc-35916-A Dt.21.02.95 And Pressure Pad Type B Dc 35916 A, Dtd.21.02.95 To Specn. Cqa(A) 1817(S) Dc 36902-A Dt.10.06.2003 R Espectively (To Be Supplied Both The Item As A Set, (Each Set Contains Pressure Pad Type A = 03 Nos & Pressure Pad Type B = 1 No.) Pressure Pad Cover To Drg.Pt No. Itx-280 Dc 35264-A Dt.04.02.92. Sensing Element (Empty Assembly) To Drg.Pt No.Itx-39A Dc 35916A Dt.21.02.95 Specn.Cqa(A)1817(S) Dc 36789-A,Dt.22.10.2001 With (1) Dust Cup Drg Pt No.Itx-283 Dc 35597-A Dt.06.10.93 = 01 No.(2) Fastner For Safety Pin Cord Drg.No.Itx 284 Dc 35916-A Dt.21.02.95 = 01 No. (3) Dust Cover Drg Pt No.Itx-285 Dc 35916-A Dt.21.02.95 = 02 Nos. Felt Disc,D-21Mm,T-3Mm To Drg.No. Arde-1905 Det-11,Iqx-780,Dc No.35879-A,Dt-20.12.94 Toluene, Pure,Nitration Grade To Specn. Is:537-1967. (To Be Supplied In 20 Litres Plastic Container) Washer Aluminium,Od:7.62Mm +/-0.05 Id:5.08+/-0.13Mm,Thickness;0.64Mm To 0.51Mm To Drg.No.Fd-650 Part No.Qx-176,Dc No.35781-A,Dt.22.08.94 Washer Glaze Board To Drg.No.Qx-175 Dc No:36103-A,Dt.29.03.96 [ Material:Glaze Board To Jss-8135 -13-2007 Rev 2 Or Carton Board To Jss:1-67-07-April-1965 Ammn.Container 47 B For Fuze 117 Mk -20 Isv-515A Dc.36647.A Dt.12.07.2013 Piece Packing Bottom Drg.Isv 460Ga Item No.05,Size:(455X145x20)Mm,Material :Expanded Polystyrene Foam Of Average Density 18 To 25 Kg/Cubic Metre For Packing Of Fuze 117 Mk-20. Piece Packing Top Drg.No.Isv 460 Ga Item No.06,Size:(460X175x20)Mm,Material:Expanded Polystyrene Foam Of Average Density 18 To 25 Kg/Cubic Metre For Packing Of Fuze 117 Mk-20. Fuze Percussion Da No.117 (Empty) Mk.20 With Cap To Designers Ref No.L5/10744/Ge/341, Part No: Qx-244 Ge,Dc No.33752-A,Dt.21.07.86. (Ref.Drg.Fuze Percussion Da No.117 Empty Mk 20 Item List For Qx 244 Ge Dci-31398-A Dt.10.02.75) Piece Packing Side Part No.Isv228sa Dc.35919A Dt.21.02.95 For Packing Of Fuze 117 Mk- 20. Disc To Part No.Isv 460Ga Dc-36064A Dt.18.01.96 No.07(28X7.5+/-0.5 Thick) For Packing Of Fuze 117 Mk-20. Disc Magazine To Drg.No.Qx-211 Dc No-35703-A,Dt.03.05.94 For Fuze 117 Mk-20. Partition To Part No.Isv 227A Dc.35919-A Dt.21.02.95 Packing Of Fuze 117 Mk-20. Disc Box Cloth To Drg.No.Qx-1466 Dci:31389-A For Fuze 117 Mk-20.[ Material: All Wool Plain Alternatively Cloth Collar White To Specn:Jss-1260 ] Ammn Container Box M 104 Mk-1 For Fuze 117 Mk-20 Designer Refdd(L)11325 Part Nosv22a Sheet 1- Dc-35994-A Sheet-2 Dc-37227-A Dt.28.07.09 Screw Set Slotted Head,Full Dog Point No.2Ba To Designers Ref.No.Cia/Amn/885,Dc No.33833-A Screw Set Slotted Head,Full Dog Point No.2Ba To Designers Ref.No.Cia/Amn/885,Dc No.33833-A Dt.19.12.87 Disc To Drg.No.Fd 537 To Drg. Part No.Qx-324, Dc-36103-A Dt.29.3.96.
