Purchase Of Laqshya Instruments, pimpri-Maharashtra

Purchase Of Laqshya Instruments , Purchase Of Instruments ( Laqshay) , • Radiant Warmer- Technical Specification Of Radiant Warmer With Baby Bassinet • A Radiant Warmer Is Used To Keep The Patient’S Core Temperature Stable At37 O C. • It Should Be Microprocessor Controlled Radiant Warmer With Manual And Servo Options. • It Should Have Facility To Display Both Skin And Air (Ambient) Temperature Separately.. • It Should Have Audiovisual Alarm Facility For Overheating Beyond Set Temperature Range. • It Should Have Alarm Facility For Patient Temperature Less Than Or Greater Than The Required Temperature I.E. Above Or Below The Set Range. • It Should Rotate And Swivel In Different Direction, So As To Allow Taking X-Ray. • The Light Should Be Dazzle Free. • It Should Have Alarm For Power Failure. • It Should Have Alarm For Heater Failure And Auto Cut Off For High Temp. • It Should Have Alarm For Probe Failure. • It Should Have Time Out Alarm In Manual Mode. • It Should Have Facility To Auto Reset The System In Case Of Hang Up Caused By Power Fluctuation. •It Should Have Manual Setting For High And Low Alarm Setting. • In Servo Mode, The Heater Output Should Be Controlled To Maintain The Baby At The Required Set Temperature. • In Manual Mode, The Heater Output Should Be Directly Controlled By A Setting On The Front Panel •Should Have A Facility To Lock The Keyboard To Avoid Unwanted User. •The Desired Temperature Range From 25 To 40 Degree C. •The Resolution Should Be 0.1 Degree C •Halogen Based Observation Light Should Be Provided For Observing The Baby. • It Should Be Mounted On A Pole With Sturdy Base With Lockable Castors • Power Supply: Power Input To Be 220-240 Vac, 50Hz Fitted With Indian Plug. • Certificate Of Calibration And Inspection From The Factory. • Warranty: Comprehensive Warranty For 5 Yearsafter Warranty Documentation: User, Technical, Maintenance Manuals To Be Supplied • Ce, Iso Certified , • Fetal Doppler - Technical Specification Of Fetal Doppler • Should Be Compact, Table Type And Light Weight. • Large Lcd Display For Display Of Fetal Heart Rate. • Back Light For Better Visibility • Display Signal Quality, Low Battery, Etc., • High Sensitivity Doppler Probe Of Frequency 2.0 Mhz • Ultra Sound Intensity ‹10Mw/Cm2. • Built-In Speaker With Output Not Less Than 1.0W • Should Work On Rechargeable Batteries With Minimum Battery Time Of 300Minutes. • Battery Charger And Spare Set Of Batteries Aa Type To Be Supplied. • Volume Control Facility And Audio Output For Ear Phone Should Be Available. • Heart Rate Range Should Be From 50 To 240 B Pm With Accuracy Of + /-2% • Should Be Water Proof Body. • Should Have Facility For Fhr Data Transfer To Pc. • Doppler Probe Should Be Light Weight With Holder Facility When Not In Use. • Should Be Supplied With Carrying Case. • Machine Should Be Iso Mark , • Baby Digital Thermometer - Technical Specification Ofbaby Digital Thermometer • Range 0.1 To 1000 Degree Centigrade • Measurement Mode- Min, Max, Average, Differential, Dual Temperature Reading •Measurement Unit- Degree Centigrade, Degree Fahrenheit, Kelvin • Temperature Probe With Connecting Cable • Relative Humidity10 To 90% Rh Non-Condensing • Ip Rating- Ip 40 G) Probe Response Time 2-3 Seconds • It Should Be Who & Unicef Standards , • Delivery Trolley/Patient Stretcher Trolley- Technical Specification Of Patient Stretcher Trolley • Overall Size: 1905Mm L X 710Mm W X 660Mm To 910 Mm H. • Stretcher Dimension 1830 Mm L X 555 Mm W. ? Two Section Top. Height Adjusted By Foot Operated Maintenance Free Hydraulic Pump. • Height Adjustment Shall Be Obtained By Hydraulically Operated Mono Block Type Linear Actuator Pump Foot Operated Actuation Having Stroke Of 140 +/- 5 Mm, Push Force 10 Kn At 270 Bars, Number Of Complete Pump Stroke 22 To 24 For Full Stroke Length • X-Ray Permeable Removable Stretcher, Backrest Raised On Ratchet. Quick Trendelenburg As Well As Reverse Trendelenburg Positions Shall Be Provided With Easily Accessible Operating Handle Provided With Two Gas Springs For Easy Action. • S.S. Saline Rod With 12 Mm Dia S.S. Rod Shall Telescope In Ss Socket Tube Approx. 15.8 Mm Dia X 18G Welded On Angular Base Bracket Of 14G Ss Sheet. •Nylon Bracket Provided To Prevent Colour Damage. It Could Be Placed At Four Different Locations. Complete With Sliding X-Ray Cassette Holder, Storage Tray Trolley Shall Be Mounted On 125 Mm Dia Non-Rusting Imported Castor Wheels Two With Brakes And Two Without. Castor Housing And Wheels Made From High Grade Non Floor-Staining Synthetic Materials With Integrated Thread Guards. • Wheel Centre Having Precision Ball Bearing To Run Smoothly. Complete With Corner Buffers, One On Each Corner. Covered Handles. Oxygen Cylinder Arrangement. •It Shall Have A Pair Of Stainless Steel Tuck Down Type Railings Made Of 19 Mm Dia X 18G Tube Fitted With M.S.Brackets. • Effective Railing Height Above Main Frame Is Approx. 235 Mm & Length Of The Railing Is 1175 Mm. • All Ms Parts And 8 Tank Pre-Treated & Powder Coated & Ss Parts Finished With Matt Polish. • Mattress Should Be Provided With Asize 2 Inch Thickness Pu Foam Which Can Be Fixed To The Trolley By Valero Similar Mechanism. • Should Be Iso/ Ce Certified , • Oxygen Hood - Technical Specification Ofoxygen Hood • It Should Be Connected To An O2 Source And May Be Used Concurrently With Increased Humidification And Temperature Control. •This Device Should Be Able To Connect With Tubing And Diffuser (To Disperse The Flow Of Incoming O2) • Device Should Be Reusable Device •Technical Characteristics:-Transparent Polycarbonate Unbreakable Single Moulded Silicon Rubber Neck Port Adjustment Enabled To Minimize The Wastages Of Oxygen, Silicon Rubber Neck Port Adjustment To Ensure Use Un Neonate/Infant/Paediatric Patients ,Oxygen Inlet Port • Dimensions (Metric )- Small Size For Infant Patients • Weight-Extremely Light Weight •Users Care, Cleaning, Disinfection& Sterility Issues–Complete Unit To Be Easily Washable & Sterilisable Using Both Alcohol And Chlorine Agents. • Standards And Safety:- • Certificates - Should Be Ce / Usfda/Iso -13485/ Bis Approved. • Warranty- 3 Year , Kidney Tray “8” Technical Specification • Material Should Be Ss304 • Should Be Isi/Bis /Ce/Iso Certified , • Small Ss Steel Bowl With Lid Technical Specification Small Ss Steel Bowl • Material Should Be Medical Grade • Surgical Instrument Should Be Isi/Bis /Ce/Iso Certified , • S.S. Tray Big 12X11 With Lid Technical Specification S.S. Tray • Material Should Be Medical Grade • Should Be Isi/Bis /Ce/Iso Certified , • Cuscus Speculum Technical Specification • Material Should Be Medical Grade • Surgical Instrument Should Be Isi/Bis /Ce/Iso Certified , • Mayo Scissor Curved Technical Specification • Material Should Be Medical Grade • Surgical Instrument Should Be Isi/Bis /Ce/Iso Certified , • Sponge Holder Technical Specification • Material Should Be Medical Grade • Surgical Instrument Should Be Isi/Bis /Ce/Iso Certified , • Artery Forcep Technical Specification • Material Should Be Medical Grade • Surgical Instrument Should Be Isi/Bis /Ce/Iso Certified

Refer document

Refer document

INR 2.62 Lakhs /-