|
| 1 | CONSTRUCTION OF 6 SEAT PUBLIC TOILET & NALA AT KHAKBAWADI W. NO. 19, BNCMC MLA FUND |
| 2 | Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary backfilling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means |
| 3 | Excavation for foundation in hard murum including removing the excavated material upto a distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary backfilling, ramming, wateringincludingshoringand struttingetc. complete. (Lift from1.5 to 3.0m)By Manual Means |
| 4 | Providing soling using 80 mmsize trap metal in 15 cm. layer including filling voidswith Crushed sand/grit, ramming, watering etc. complete |
| 5 | Providing and laying Cast in situ/ ReadyMix cement concrete in M15 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding/steps including steel centering, formwork, laying/ pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surfaces, only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin, etc. (Wooden centering will not be allowed.), with fully automatic microprocessor-based PLC with SCADA enabled reversible Drum Type mixer/concrete Batchmix plant (Panmixer), etc. complete. With fine aggregate (Crushed sand VSI Grade) |
| 6 | Providing and laying Cast in situ/ Ready Mix cement concrete inM-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/ pumping, compaction and roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinfor cement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible DrumType mixer/ concrete Batch mix plant (Pan mixer) etc. complete.With fine aggregate (Crushed sand VSI Grade) |
| 7 | Providing and laying Cast in situ/ Ready Mix cement concrete M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/ pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete, (Excluding reinforcement and structural steel). with fully automatic micro process or based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Panmixer) etc. complete.With fine aggregate (Crushed sand VSI Grade) |
| 8 | Providing and laying Cast in situ/ Ready Mix cement concrete M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. slabs and landings as perdetailed designs and drawings including steel centering, formwork, cover blocks, laying/ pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete, (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Panmixer) etc. complete.With fine aggregate (Crushed sand VSI Grade) |
| 9 | Providing second class Burnt Brick masonry with conventional/I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, wateringand scaffolding etc. Complete. |
| 10 | Providing brick masonry with interlock \"Four lock\" bricks in plinth & superstructure of specified 150mm thick including construction with interlock \"Four lock\" bricks, filling the hollow spaces with cementious grout material of proportion of C:M 1:6 using trap stone grit metal/ artificial sand including dusting off the finished brick masonry surface,watering & curing etc complete. ( Excluding steel reinforecement for strengthening ) |
| 11 | Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. |
| 12 | Providings and faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 Kilogram per cement bag curing the same for not lessthan 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grainsandcuringforfourteendays scaffolding etc.complete. |
| 13 | Providing internal cement plaster 20mm thick in Single coats in cement mortar 1:5 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc. complete |
| 14 | Providing 25mm to 30mm thick partition of polished black kadappa stone slab of approved quality including giving required size and shape etc.Fixing in cement mortar1:3 curing and cement etc. complete.b) Both side polish |
| 15 | Providing and fixing factory made solid core flush door in single leaf 35 mm thick, decorative types, of exterior grade, as per detailed drawings, conforming to I.S.:2202 1962 (Revised) with approved face veneers on both faces with/ without glazing and venetians in thepositions shown on the drawings or as directed, all necessary beads, moulding and lipping, holdfasts, mat finish stainless steel fixtures fastenings, finishing with french-polish/ waxing complete. (without door frame). (Sample to be got approved from Ex.Engineer before use) Commercial Hard Wood shutter |
| 16 | Providing and applying two coats of exterior weather shield paint of approved manufacture and of approved colour to the plastered surfaces including cleaning, preparing the plaster surface, applying primer coat, scaffolding if necessary, and watering the surface for two days etccomplete. NOTE: For Item One Number 15 to 18 prior approval of Superintending Engineer will be necessary |
| 17 | Providing and fixing corrugatedgalvanised iron sheets of 0.63mm thick (24 B.W.G.) for roofing with out wind tiles including fastening with galvanised iron screws and bolts, lead and bitumen washers as per drawing etc. complete. (Weight of 5.5 Kilogram/sq.m.). |
| 18 | Providing and fabricating structural steelwork in rolled sections like joists, channels, angles, tees, etc. as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted/ bolted/ welded connections without connecting plates, braces, etc. and including one coat of anticorrosive paint and over it two coats of an oil painting of approved quality and shade, etc. complete. |
| 19 | Providing and fixing 1st class white glazed earthenware Orissa Type W.C.Pan 580mm dia including Por Strap cast iron soil and vent pipe up to the outside face of the wall 1:5:10) cement concrete bedding 15mm thick,10liter P.V.C. flushing cistern with all necessary pipe connection etc. complete. |
| 20 | Providing and laying ceramic tiles having size 30 cm. x 45 cm. confirming to corresponding I.S. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete. |
| 21 | Providing and laying matt finish ceramic tiles of having size 30cm x 30cm confirming to I.S.15622/ 2006 (group DII-A) and 7 to 8mm thick for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with white/ colour cement slurry cleaning curing etc. complete. |
| 22 | Providing and fixing heavy duty inter locking concrete RUBBER MOULD GLOSSY PAVING BLOCKS of 60 millimeter thickness of having a strength of 400 Kilogram/sq.m of approved quality and shape on a bed of crushed sand of 25 to 30 millimeter thick including striking joints and cleaning etc. complete. (using 100% crushed sand |
| 23 | Dismantling brick masonry in Mud and stacking the materials as directed with all leads, lifts etc. complete |
| 24 | Dismantling stone masonry in Mud including stacking the materials as directed with all leads, lifts etc. complete. |
| 25 | Transportation |
| 26 | Dewatering on BHP basis by using water pump including diversion of stream, providing coffer dams, earthern bunds etc. as may be necessary for foundation and other parts of the the works and pumping out water during and after excavation as may be required by using 5.0 to 9.0 BHP pump etc. complete. (prior approval of Superin tending Engineer will be necessary) |
| 27 | JCB |
| 28 | LABOUR |
| 29 | Providing water proof plaster in W.C. and bath 20mm thick for dado in cement mortar 1:3 with neat finishing, floating using water proofing compound at the rate of 1Kilogram. per bag of cement of approved make and manufacturer and curing (and filling joints of Nahani trap andany outlet by properly) etc. complete. |
| 30 | Providing and fixing in position after hoisting, pre cast 1:2 cement mortar reinforced jali 50mm thick with 3mm diameter mild steel bar reinforcement, of approved design on both side, fixing in cement mortar 1:3 and curing etc. complete |
| 31 | G.I.PIPES |
| 32 | Providing and fixing on walls/ ceiling/ floors, 15mm dia. heavy grade having embossed as ISI Mark galvanised iron pipes weight of 1.48 Kilogram/metre with necessary fittings. remaking good the demolished portion and applying primer of anti-corrosive oil paint 2coats Including necessary scaffolding and removing existing pipeline if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. |
| 33 | Providing and fixing on walls/ ceiling/ floors 20mm dia. heavy grade having embossed as ISI Mark galvanised iron pipes of 1.93 Kilogram/ meter with necessary fitting remaking good the demolished portion and applying primer of anti-corrosive oil paint, 2 coats Including necessary scaffolding and removing existing pipe line if necessary and conveyingand stacking the same in PWD chowky or as directed etc. complete. |
| 34 | Providing and fixing on walls/ ceiling/ floors, 25mm dia. heavy grade having embossed as ISI Mark galvanised iron pipes weight of 3.01Kilogram/meter with necessary fittings. remaking good the demolished portion and applying primer of anti-corrosiveoil paint 2 coats Including necessary scaffolding and removing existing pipeline if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete |
| 35 | Providing and fixing15mm dia. Screw down bib/ stop tap of brass including necessary socket union nut complete. |
| 36 | Providing and fixing P.V.C. Rain water pipes of 110mm outer diameter and having wall thickness of 2.2 to 2.7mm confirming to I.S. 13592-1992 including proper rainwater receiving recess with P.V.C. plug, bend, necessary fittings, such as, offsets, shoes, inluding fixing the pipe on wall using approved wooden cleats projecting 25mm to 40mm from face of wall a fixing with clips of approved quality and One Number, filing the joint using rubber gas ket with solvent cement and properly resting the shoe of pipes on C.C. or masonry blocks, including necessary scaffolding and maintenanc for 3yrs for any leakages or dis locations of pipes. All the P.V.C. fittings and additional 2 piece socket clips shall be got approved from engineer in charge etc. complete. |
| 37 | Providing, laying and fixing P.V.C. pipe of 75mm dia. with fittings such as bends, tees, reducers, clamps, etc. including necessary excavation, trench filling etc. complete. Including removing existing pipe line if necessary and conveying and stacking the sameinPWD chowky or as directed etc. complete. |
| 38 | PVC Water Tank |
| 39 | Dissmentalling RCC |
| 40 | Providing and constructing Brick Masonry Inspection Chamber 60cm x 45cm x 90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W. pipes, Brick Masonry, plastering from inside and with frame fixed in cement concrete with R.C.C. Cover medium duty 140Kilogramwith frame etc complete |
| 41 | Providing and laying hand cut polished Kotah Stone flooring 25mm to30mm thick and 30cm wide in plain/ diamond pattern on a bed of 1:6 C.M. including cement float, filling joints with neat cement slurry, curing, polishing and cleaningetc. complete. |
| 42 | Providing and laying for 150mm dia salt glazed stoneware pipe including fittings Such as bends, tees, single junction, double junctions laying, jointing (including excavation and refilling the trenches) complete. |
| 43 | Providing and fabricating structural steel work in rolled sections like joists, channels, angles, teesetc.asperdetaileddesignanddrawingsorasdirectedincludingcutting,fabricating, hoisting,erecting,fixinginpositionmakingriveted/bolted/weldedconnectionswithout connecting plates, braces etc. andincluding one coat of anticorrosive paint andover ittwo coats of oil painting of approved quality and shade etc. complete. |
| 44 | Providing and fixing reinforced cement concrete cover of size 90 cm x 45 cm with frame over inspection chamber etc. complete. Heavy duty (225 Kilogram) |
| 45 | 5 percent add |
| 46 | GST 18 percent add |
