|
| 1 | Koormmamkulangara Lakshamveedu Colony well renovation |
| 2 | 50.2.3.1:Pumping or Bailing out water and removing slush etc by using pump set including cost of labour, oil hire charges of pumpset, etc complete |
| 3 | OD345455/2024-2025:Earth work in excavation by mechanical means (hydraulic excavator/manual means) over areas exceeding 30cm in depth,1.5m in width as well as 10 sqm on plan lift 3.m to 4.5m |
| 4 | OD345454/2024-2025:Earth work in excavation by mechanical means (hydraulic excavator/manual means) over areas exceeding 30cm in depth,1.5m in width as well as 10 sqm on plan lift 4.5m to 6.0 m |
| 5 | OD345453/2024-2025:Earth work in excavation by mechanical means (hydraulic excavator/manual means) over areas exceeding 30cm in depth,1.5m in width as well as 10 sqm on plan lift 6.0 m to 7.50 m |
| 6 | OD345452/2024-2025:Earth work in excavation by mechanical means (hydraulic excavator/manual means) over areas exceeding 30cm in depth,1.5m in width as well as 10 sqm on plan lift 7.50 m to 9.0 m |
| 7 | OD345451/2024-2025:Earth work in excavation by mechanical means (hydraulic excavator/manual means) over areas exceeding 30cm in depth,1.5m in width as well as 10 sqm on plan lift 9.0 .m to 10.50m |
| 8 | OD345465/2024-2025:Earth work in excavation by mechanical means (hydraulic excavator/manual means) over areas exceeding 30cm in depth,1.5m in width as well as 10 sqm on plan lift 10.50 .m to 12.0m |
| 9 | 2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil |
| 10 | 5.9.5:Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers |
| 11 | 5.7:Reinforced cement concrete work in well - steining excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand (Zone - III) : 3 graded stone aggregate 20 mm nominal size) |
| 12 | 5.22.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more |
| 13 | 50.6.7.1:Laterate masonry with neatly dressed laterate stone of size 40x20x15cm or nearest size in cement mortar 1:6 for foundation and basement including all cost of materials, labour charges etc. |
| 14 | 50.6.7.2:Laterate masonry with neatly dressed laterate stone of size 40x20x15cm or nearest size in cement mortar 1:6 for super structure above plinth level up to floor two level including all cost of materials, labour charges etc. |
| 15 | OD346050/2024-2025:Laterate dry masonry with neatly dressed laterate stone of size 40x20x15cm or nearest sizecementfor foundation and basement including all cost of materials, labour charges etc. |
| 16 | OD227280/2024-2025:Dry rubble masonry - Dry rubble masonry without concrete levelling course masonry with good quality blasted rubble including packing to compactness to lines and levels cost and conveyance of all materials labour charges etc. complete as per direction of Departmental officer at site |
| 17 | 4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size) |
| 18 | 13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) |
| 19 | 13.46.1:Finishing walls with Acrylic Smooth exterior paint of required shade:New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) |
| 20 | 10.25.2:Item Shifted to Sub head 14 as item 14.73Item Shifted to head 14 as item 14.74Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works |
| 21 | 9.48.2:Providing and fixing M.S. Grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to openings/ wooden frames with rawl plugs screws etc |
| 22 | 13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work |
| 23 | 16.86.1:Providing and laying gang saw cut 18 mm thick, mirror polished pre moulded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring in road side plazas and similar locations, laid over 20 mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of Engineer-in-charge.Area less than 0.50 sqm. |
| 24 | 16.21:Engraving letters in hard stone |
