Sales : +91-777 804 8217
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 17-05-2025 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 24-05-2025 |
| Sl. No. | Item Description |
| 1 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 Sqm on plan and n. exc 1.5 m in depth and getting out in soft/ loose soil complete all as specified and directed. |
| 2 | Excavating over areas n exc 1.5 m in depth and getting out in soft/ loose soil complete all as specified and directed. |
| 3 | M&L PCC 1:4:8, type D2, (using 40mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed. |
| 4 | M&L RCC M-30 (20mm graded stone aggregate) as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed. |
| 5 | M&L RCC M-30 (20mm graded stone aggregate) as in Columns, pillars, piers, posts and struts complete all as specified and directed. |
| 6 | M&L RCC M-30 (20mm graded stone aggregate) as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed. |
| 7 | M&L for RCC M-30 (20mm graded stone aggregate) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified. |
| 8 | M&L for RCC M-30 (20mm graded stone aggregate) as in Chajjas complete all as specified. |
| 9 | M&L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter, flat, rough finished surfaces of concrete complete all as specified and directed. |
| 10 | M&L for formwork to sides of pillars, posts, struts, piers, columnn and stanchions, Square, rectangular or polygonal rough finished surfaces of concrete complete all as specified and directed. |
| 11 | M&L for form work tosides and soffits of floor or roof beam, beam, hauchings, girders, bressum-emers, lintels, cantilevers, shelves incl supports overhangs etc also splays between floors and beams, flat, rough finished surfaces of concrete complete all as specified and directed. |
| 12 | M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed. |
| 13 | M&L for formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n.exc 20cm wide complete all as specified and directed. |
| 14 | S&F MS TMT Bars of 10 mm dia and over,cut to length,vbent to shape requiredincluding cranking, bindingspirally for hooping for columns hooking ends and binidingwithand including MS wire (annealed) not less than 0.9 mm dia or securining with clip complete all as specified and directed. |
| 15 | S&F MS TMT Bars of 5 mm dia and overup to 10 mm diain stirrups, spacers and binders, cut to length bent to shape requiredincluding cranking, bindingspirally for hooping for columns hooking ends and bindingwithand including MS wire annealed not less than 0.9 mm dia or securining with clipcomplete all as specified and directed. |
| 16 | M&L for brick work with AAC block (old size bricks) straight or curved on plan exceeding 6m meanradius with old size bricks in wall built in cement mortar (1:6) complete all as specified. |
| 17 | M&L for Brick work with old size sub-class \"B\" bricks, straight or curved on plan to any radius in half brick thick wall built in cement mortar (1:4) complete all as specified and directed. |
| 18 | M&L for Anti-termite treatment for treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface complete all as specified and directed.Note : Area of the sub structure in contact with backfill to be measured. |
| 19 | M&L for Anti-termite treatment for treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface complete all as specified and directed. |
| 20 | M&L for Anti-termite treatment for treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and directed. |
| 21 | M&L for Anti-termite treatment for treating the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall complete all as specified and directed. |
| 22 | M&L for Polythene film, 300 micron thick @ 0.30 to 0.50 kg per sqm conforming to IS specification with lap joints 100mm complete all as specified and directed. |
| 23 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed. |
| 24 | Removing excavated material n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and directed. |
| 25 | M&L for Hardcore of broken stone or boulder of gauge exc 63 mm but n. exc 100 mm, deposited, spread and levelled in layers n. exc 15 cm thick, watered and rolled/ rammed to a true surface complete all as specified. |
| 26 | Earth filling, spreading in layers n.exc 30cm thick: waering, ramming/rolling and finishing to required size, shape etc, n.exc 1.5m high from base solids to a true surface complete all as specified. |
| 27 | M&L 100mm thickPCC 1:4:8, type D-2, (Using 40 mm graded stone aggregate), as in flooring, sub base etc complete all as specified. |
| 28 | M&L 25mm thickPCC 1:2:4, type B-0, (Using 12.5 mm graded stone aggregate), as in flooring complete all as specified. |
| 29 | M&L Premium quality non-skid ceramic tile of size 600mm x 600mm, thickness of 7 to 8mm pasted with tile adhesive and epoxy grouted with same make as of tiles water absorption of the tile should be between 3% to 6%complete all as specified and directed. |
| 30 | All as per Ser item No 29.00 above but as in vertical surfaces such as skirting, dados & risers to steps etc complete all as specified and directed. |
| 31 | M&L Premium quality non-skid ceramic tile of size 400mm x 400mm, thickness of 7 to 8mm pasted with tile adhesive and epoxy grouted with same make as of tiles water absorption of the tile should be between 3% to 6% complete all as specified and directed. |
| 32 | M&L Premium quality glazed ceramic tile of size 600mm x 300mm thickness 7mm, water absorption between 10% to 20% pasted with tile adhesive and epoxy grouted with same make as of tile complete all as specified and directed. |
| 33 | M&L Machine cut kota stone slab flooring, cills20-25mm thick over cement screed base laid and jointed With grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed. (single piece of Kota stone to be fixed in stair treads) |
| 34 | M&L, Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete. (single piece of Kota stone to be fixed in stair risers) |
| 35 | M&L Rendering 15 mm thick in cement plaster 1:6on stone masonry surfaces or surface other than fair face of brickwork or on one side of lathing,finished even and smooth without using extra cement complete all as specified and directed. |
| 36 | M&L Rendering 10 mm thick in cement plaster 1:3 on ceiling finished even and smooth without using extra cement complete all as specified and directed. |
| 37 | M&L Rendering 15 mm thick in cement plaster 1:4 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed. |
| 38 | M&L preparation of newly plastered or unplastered surfaces of wall and applying two coat of distemper oil emulsion white/tinted with a wall care putty finished surface complete all as specified and directed by Engr -in - charge. |
| 39 | M&L Preparation of new ceiling surfaces plastered or unplastered and applying two coat of white washcomplete all as specified and directed by Engr -in - charge. |
| 40 | M&L preparation of newly plastered or unplastered surfaces of wall and applying two coats of Acrylic Smooth exterior paint of required shed including priming coat of exterior primer complete all as specified and directed by Engr -in - charge. |
| 41 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/ Chowkhat of size 65 x 100 mm comprising of virgin PVC polymer, calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum and screw withdrawal strength of 2200 N (Face)and 1100N (edge), minimum compressive strength 58 N/ mm ² ,modules of elasticity 900 N/mm ² and resistance of spread of flame of Class A category with property of being termite/borer proof,water/moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed.Note:- (a) Density is not less than 650(b) Variation in profile size of frame ±5mm is allowed and contractor\"s quoted rate is deemed to include the same. |
| 42 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/ Chowkhat of size 65 x 125 mm comprising of virgin PVC polymer, calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum and screw withdrawal strength of 2200 N (Face)and 1100N (edge), minimum compressive strength 58 N/ mm ² ,modules of elasticity 900 N/mm ² and resistance of spread of flame of Class A category with property of being termite/borer proof,water/moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed.Note:- (a)Density is not less than 650(b) Variation in profile size of frame ±5mm is allowed and contractor\"s quoted rate is deemed to include the same. |
| 43 | M&L mild steel framed work of Fe-290 (Gde E-165) as in Cooler stand (to be fixed in multy storey building), ladder, guard bars etc made out of angle iron of size 40 x 40 x 5 mm cross bracings, stifferers, supports, clamps and back plates, clamps, fabricated from structural steel sections including nuts, bolts, washers, welding, binding cold or hot, drilling holes for bolts, in any shape or size as including painting with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified |
| 44 | Providing and fixingfactory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) havingminimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer In- Charge. Note: stainless steel butt hinges and necessary S.S screws shall be paid separately. |
| 45 | Providing and fixingglazed and skeleton shutters open rebated and prepared to receive glass, gauze etc factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) havingminimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer In- Charge. Note: stainless steel butt hinges and necessary S.S screws shall be paid separately. |
| 46 | S&F Providing and fixing factory made uPVC white colour casement/sliding window/door, made of extruded profiles. Profiles of frames and sash will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc.. making arrangement for fixing of hardware, EPDM gasket, 1.2 + 0.2.mm thick galvanized steel profile to be inserted in required profile, framewill be fixed to the wall with 8mm x 100mm long fasteners, all complete and as directed, (Glazing, hardware hinges and fitting, EPDM rubber gasket etc. to be paid separately.) Note : Each member of window to be measured separately wrth clear length all complete as per the direction of Engineer-in-charge. |
| 47 | S&F factory made uPVC white colour fixed window (area exceeding 1.00 sqm but not exceeding 2.00 sqm) made of extruded profiles with wall thickness of 2.3mm(+-0.2mm). Window profile with hollow section with multi chamber. Frame (60mm x 58mm). T profile (Onevertical length in between two shutters) (60mm x 74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc. making arrangement for fixing of hardware, EPDM gasket. 1.2 +–0.2mm thick, galvanized steel Frame (28mm x 21.5mm), T profile (27mm x 17 mrn) to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners- 5mm thick glazing with selected quality glass.Note: (a) The unit rate quoted by contractor excludes cost of glass & wiremesh and includes all other connected accessories Net opening will be measured for payment purpose.(b)Only Glass and wiremesh will be measured and paid seperately. |
| 48 | S&F sheet glass of4mm,ordinary quality andglazing with oil putty in squares n.exc 0.5 Sqm in each pane, complete all as specified. |
| 49 | S&F Galvanisedmild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanisedwire staples complete all as specified and directed by Engr-in-Charge. |
| 50 | S&F 4mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 Sqm in each pane complete all as specified and directed. |
| 51 | S&F Solid PVC Double door frame of size 50mm x 95mm made out of 5mm wood grain printed PVC sheet reinforced with M.S. tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed. |
| 52 | S&F Factory Made Solid PVC wood grain printed Moulded Door Shutter, with particle board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing all as specified and directed |
| 53 | S&F 100 mm long stainless steel hinges, medium weight and fixed complete all as specified and directed. |
| 54 | S&F 150 mm long stainless steel handles cast type anodised complete all as specified and directed. |
| 55 | S&F 200 mm long stainless steel anodised barrel tower bolts of extruded section and fixed complete all as specified and directed. |
| 56 | S&F 250 mm long stainless steel sliding door bolt with hasps staple (bolt type)andfixing clips of sheet, cast or extruded section and fixing bolt and sliding bolts of extuded sections or cast aluminium alloy and fixed complete all as specified and directed. |
| 57 | S&F MS 300mm, stainless steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed. |
| 58 | S&F 140 mm floor door stopper of stainless steel body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed. |
| 59 | M&L preparation of new or previously untreated steel surface any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 60 | M&L preparation of new or previously untreated surface of wood or wooden based surfce any description not other wise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 61 | S&F MS powder coated decorative drapery rod (colour as approved) of 20mm dia approved pattern & design including decorative knobs (wall side and free side) & powder coated mild steel flat iron brackets fixed with steel screws & PVC rawl plugs/grips complete all as specified. |
| 62 | M&L PCC 1:3:6, type C0, using (12.5mm graded stone aggregate) as in back filling of pressed steel frames, bed blocks, coping, fixing of hold fasts etc including necessary formwork complete all as specified and directed by Engr-in-Charge |
| 63 | M&L for making kebs with PCC (1:2:4), type B0, using WPC along side wall adjoining to roof in concave shape complete all as specified. |
| 64 | M&L for Roof Treatment in patches as specified below and as directed :(a) Apply 15mm thick screed/plaster in CM with 1:3 while the concrete is green with approved water proofing compound in proportion as recommended by manfucaturer. (b) Surface Preparation . Cleaning the screed surface to make it laitance, dust and sludge free, removing any extended protion by grinding using suitable equipments and providing basic repair including filling of any cracks or pot holes with sika latex mortar modifier. (c) Joint Sealing and detailing . Providing and applying sika reemat premium at all detailing areas. (d) Epoxy Primer. Providing and applying Sikalastic-10 Primer EP, 2 part, and sovent free, low viscous epoxy based primer applied at consumption of 0.2 Kg/Sqm. The primer must have a compressive strength>60N/Sqmm and flexural trength >30NSqmm. (e) Waterproofing and cool roof coating. Providing and applying Sikalastic-590 IN, single componenet, flexible, liquid applied UV and weather resistant, polyuethane waterproofing membrane with high reflective. |
| 65 | The waterproofing membrane must have following properties:-(i) Tensile strength > 1.5N/Sqmm according to ASTM D412(ii) Elongation at break>250 according to ASTM D412(iii) The liquid membrane must be resistant to growth of algae and fungi and have high SRI of 106 with reflectivity 84% according to green bldg reqmts. (iv) The waterprrofing membrane must be applied in three coat of SIKALASTIC-590 IN applied at consumtion of 0.5Kg/Sqm each coat.(v) The roofing system should be compitable with bitumen.Note :(i) Make of all the product for above treatment.Make approved by GE in writing in make mention in Appx \"A\" or from E-in-C approved list.(ii) All auxiliary and accessories involed during application should be supplied by single manufacturer as a part of System.(iii) The application must be done with necessary detailing as per manufacturer methed statement.(iv) The manufacturer must be an ISO 9001 and 14001 certified and valid certificate must be produced as proof. |
| 66 | M&L Cement concrete 50mm thick type C2, 1:3:6 using 20mm graded aggregate as in plinth protection/path finishing surfaces even and fair (without using extra cement) complete all as specified and directed. |
| 67 | S&FVitreous china wash down water closet pan (pedestal pattern), white excluding fixing bolts, flushing cistern and flush pipe complete all as specified and directed. |
| 68 | S&F 10 ltr capacity PVC valveless, syphonic action type, flushingcistern, lowlevel, white, with inlet ball valve, float and handle including brakets complete all as specified and directed. |
| 69 | S&F vitreous china wash basins, size 550x400mm white flat back including cutting for and pinning in ends of brackets or errecting standincluding 32mm waste fittings, chromium plated with long screwed shanks & fly-nuts, waste pipe, flange end bedded in red lead cement and other end fixed complete all as specified and directed. |
| 70 | S& F PVC connections 15 mm size, 450 mm long with PTMT nuts complete all as specified and directed. |
| 71 | S&F Rotational moulded polythene water storage tanks (Cylinderical vertical with closed top) hoisted and fixed in position 500 ltrs, including 20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed complete all as specified. |
| 72 | S&F 15mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 73 | S&F 20 mm stop valves, cast copper alloy,screwed down high pressure,with crutch or butterfly handle scresed both ends for iron pipe or for unions and fixed complete all as specified. |
| 74 | S&F 25mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 75 | S&F 25mm bore GI tubing med grade with all fittings fixed to walls or laid in floorscomplete all as specified. |
| 76 | S&F 15mm bore GI tubing medium grade with all fittings fixed to walls or laid in floorscomplete all as specified. |
| 77 | S&F 20mm bore GI tubing med grade with all fittings fixed to walls or laid in floorscomplete all as specified. |
| 78 | S&F 15mm bib taps, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 79 | S&F Brass Chromium plated wall mixer for mixing hot & cold water screwed down for 15mm bore iron pipecomplete all as specified and directed by Engineer in Charge. |
| 80 | S&F Centre hole Basin mixer, swan neck type for mixing hot & cold water screwed down for 15mm bore iron pipecomplete all as specified and directed by Engineer in Charge. |
| 81 | S&F 15 mm fancy type chromium plated stop valves/angle valve, screwed down high pressure,with crutch or butterfly handle scresed both ends for iron pipe or for unions and fixed complete all as specified. |
| 82 | S&F Shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 300gms) |
| 83 | S&F brass chromium plated towel rail 20mm dia, D type, 60cm long between flanges fixed with CP brass screwsincluding wooden/plastic beads complete all as specified and directed by Engineer in Charge. |
| 84 | S&F 600 mm x 450 mm bevelled edge mirror of selected quality galss, mounted on 6 mm thick AC building boaard or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 85 | M&L for CP Toilet Paper Holder with flat recessed type stainless steel Complete all as specified and directed. |
| 86 | M & L for water proofing treatment to RCC sunken slab as specified below and as directed by Engineer in Charge:-(a) Rendering 15 mm thick in cement mortar 1:3 using water proofing compound on raised vertical surfaces.(b)Cleaning the surface with wire brush / coir brush, removing loose material like dust particles, dirt etc.(c) Creating fillet covering of 50 x 50 mm with polymer modified mortar on the junction of slab and wall (d) Apply first coat of two component modified polymer coating on the horizontal and vertical surface. (e)Provision of glass fiber mesh of 2 x 2 mm immediately on above coating.(f) Apply second coating of two component modified polymer coating after 72 hrs.(g) Laying AAC block as per requirement. (h)Joining the sanitary pipes with the waterproofing tape having bridging ability of more than 1.5 mm(j)Filling the gap between the wall opening and sanitary pipe with non shrink cementatious grout.(k) Complete treatment to be carried out by authorised applicator of waterproofing manufacturer.Note : (a)The treatment shall be carried out as per the manufacturers instructions, and as directed by Engineer in Charge.(b)The plan area of floor shall be considered for payment.(c)WPC shall be measured and paid seperately. |
| 87 | S&F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches/ floors/walls complete all as specified and directed. |
| 88 | S&F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches/ floors/walls complete all as specified and directed. |
| 89 | M&L 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed. |
| 90 | S&F PVC (SWR) bend any radius 110 mm bore complete all as specified and directed. |
| 91 | S&F PVC (SWR) bend any radius 75 mm bore complete all as specified and directed. |
| 92 | S&F PVC (SWR) vent cowl 75 mm bore complete all as specified and directed. |
| 93 | Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed. |
| 94 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer, calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum and screw withdrawal strength of 2200 N (Face)and 1100N (edge), minimum compressive strength 58 N/ mm ² ,modules of elasticity 900 N/mm ² and resistance of spread of flame of Class A category with property of being termite/borer proof,water/moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed.Note : (a) Density is not less than 650(b) Variation in profile size of frame ±5mm is allowed and contractor\"s quoted rate is deemed to include the same. |
| 95 | Providing and fixingfactory made single extruded WPC (Wood Polymer Composite) solid plain flush shutter used for cupbard of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) havingminimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer In- Charge. Note : Stainless steel butt hinges and necessary S.S screws shall be paid separately. |
| 96 | Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in any type of soil complete all as specified and directed. |
| 97 | M&L for sand filling under floors or in foundations including watering and consolidation all as directed. |
| 98 | M&L machine pressedprecast concrete interlocking paver block with grey cement and pigment (coloured tiles) of any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade complete all as directed. |
| 99 | M&L for providing factory made precast cement concrete solid blocktype B1, 1:2:4 (20mm graded stone aggregate) as in kerb stone of any size/thickness setting in cement mortar 1:4 for path edgings etc, embedded in positon including all necessary excavation, tamping ground arround blocks and removal of rubbish/surplus soil etc. complete all as directed. |
| 100 | M&L 150mm bore Concrete bed (PCC 1:4:8, type D2)to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested complete all as specified and directed. |
| 101 | M&L 150mm bore RCC pipes, class NP2, laid and jointed complete with collars complete all as specified and directed. |
| 102 | M&L for brick work with fly ash bricks (old size bricks) straight or curved on plan exceeding 6m meanradius with old size bricks in wall built in cement mortar (1:6) complete all as specified. |
| 103 | M&L for Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required for 150mm dia complete all as specified and directed. |
| 104 | M&L for Pre cast cement concrete 1:2:4, type B-I, using 20mm graded stone aggregate as in Manhole cover including all necessary formwork and placing where directed by engineer-in-charge(Except set in cement mortar) complete all as specified & directed |
| 105 | M&L for point wiring complete with ISI marked 1.5 sqmm single core PVC insulated unsheathed cable 1100V grade FRLS with multistranded copper conductor drawn through concealed in wall/ceiling surface in existingPVC rigid concealed conduit suitable size with all accessories such as bend, reducers, MS hooks, MS junction boxes, 2mm thick galvanised steel pressed sunken terminal boxes of suitable sizes for mounting of modular switchs, sockets, fan regulator etc covered with modular cover plate of required color fixed with brass screws and cup washers painting terminal boxes inside and outside with one coat red oxide primer includingfixing and 1.5 sqmm copper conductor as earth continuity to connect common earth dolly completed for the following all as specified and directed by Engr-in-Charge :- |
| 106 | One light point/Fan point/Exhaust point controlled byone way switch |
| 107 | One three pin socket out let 5 amps on the same board with other switches |
| 108 | One 3 pin, 5A switch socket outlet point on independent board |
| 109 | All as per Ser item No 105.00 above but with 2.5 Sqmm cable for 1 No 16 amps socket outlet point on independent board including 2.5 sqmm PVC insulated unsheathed cable multistranded with copper conductor green in colour as earth continuity conductor. |
| 110 | Supply and fixing PVC lamp holder suitable for LED 5 to 20 watt bulb complete all as specified and directed. |
| 111 | Supply and fixing LED bulb 1x10 watt lamp having lumanous efficiency warranty 2 year complete all as specified and directed. |
| 112 | S&F of LED tube light fitting 20W (4 feet long), 230V, surface and wall mounted LED batten with polycarbonate housing and integrated electronic driver and including connections up with copper conductor wire with suitable size as per specification and directed by Engineer-in-Charge. |
| 113 | S&F of LED tube light fitting 10W (2 feet long), 230V, surface and wall mounted LED batten with polycarbonate housing and integrated electronic driver and including connections with copper conductor wire with suitable size as per specification and directed by Engineer-in-Charge. |
| 114 | M&L ceiling rose 3 termincal/ PVC / polycarbonate isolated body complete all as specified and directed. |
| 115 | S&F Modular switch 1 way 6 amps one module switch complete all as specified. |
| 116 | S&F Modular Socket 6A 2/3 pin combined 2 module socket 230 volt AC supply complete all as specified. |
| 117 | S&F Modular switch single pole 1 way 16 amps 230 volt AC supply 1 module complete all as specified and directed. |
| 118 | S&F Modular socket 6A / 16A -2/3 pin, 2 module,230 volt AC supply complete all as specified and directed. |
| 119 | M&L for submain wiring with two single core PVC FRLS insulated copper conductor 6 Sqmm and same 6 Sqmm for continuous earth wire drawn in existing PVC conduit and including taking down old unserviceable wire any type and making good disturbed surfaces of walls as necessary complete all as specified and directed.Note : Two run of wire and one run of earth wire shall be measured as one unit. |
| 120 | Supply and fixing (concealed flush to wall) factory made DB (made out of CRCA sheet not less than 1.2mm thick, fitted with DIN channel neutral link and 250 Amp rated bus bar) VTPN, 4 Way, suitable for mounting MCCB/MCB, conforming to IS-13032, DB shall be semi glosy finished with epoxy polyster based powder paint sprayed and backed at high temperature between powder paint process to ensure smooth finish and protection against corrosion atmosphere. The DB shall be double door type with hinged door with locking arrangement, the DBs shall be same make as MCBs, DB shall be provided with level marking indicating the incoming and outgoing circuits on always as specified. The DBs shall be of IP-42 protection class, including taking down unserviceable old DB any type including MCB etc and including making good disturbed surfaces of walls as necessaty complete all as specified and directed by Engineer-in-charge.Note :- MCCB/MCB shall be measured and paid separately under appropriate item of BOQ. |
| 121 | S&F MCCB 4 pole, 415 V, adjustable type, 63 Amps with breaking capacity 16 KAcomplete all as specified and directed by Engr-in-Charge. |
| 122 | S&F sheet metal enclosures for DB’s SPN 230 volts 8 way with 200 amps rated bus bar double doorto the disturbed walls and surfaces area etc all as specified and directed by Engr-in-Charge. |
| 123 | Supply and fixing amp rating 240V, 10KA \"C\" curve miniature circuit breaker (MCB) of SPNand current carrying capacity 32 Amp, in the MCB DB complete with connection testing and commissioning to the distributed walls and surface area etc complete all as specified and directed. |
| 124 | Supply and fixing 240V, 10 KA \"B\" curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning to the distributed walls and surface area complete all as specified and directed. |
| 125 | M&L for earthing complete with galvanized steel earth plate electrode 600mm x 600mm x 6mm thick buried directly in ground vertically to a depth not less than 2.25 Mtr below ground level with top edge of earth plate at a depth not less than 1.5 Mtr below ground level, earth plate surrounded by 15cm thick packed layer of charcoal dust and common salt, connected to galvanized iron earth lead wire 4mm dia (8 SWG) by means of bolts, nuts and washers of galvanized iron or steel and thimbles upto equipment and other end of the earth wire connected to earthing test point and protected by galvanized iron pipe light grade 15mm dia and water pipe 20mm dia GI light grade with funnel & wire mesh,PCC chamber in cement concrete (1:2:4) type B-1 including 40mm thick pre cost RCC (1:2:4) type B-0 cover and 40 x 40 x 6mm angle iron frame on top of pit cover and excavation & earth work complete all as shown on electrical plate No. 3 of MES Schedule Part - I of SSR-2009 complete all as specified and directed by Engineer-in-Charge.Note : (a) GI wire upto earth earth test point/ equipment is included in this item.(b)Outer edge of earth pit chamber shall be 1 meter away from the outer edge of PCC chamber.(c) Minimum weight of reinforcement shall be 1 kg for each earth pit cover. |
| 126 | Supply and laying and connecting from existing steel water tubing, 40 mm dia ISI Marked, \"medium grade\" galvanised, including tube fittings Viz Tees Socket bends elbows, union nipple etc screwed and socketed joint laid in trenches/under road with all fitting complete all as specified. |
| 127 | Supply and laying and connecting from exacting steel water tubing, 25 mm dia ISI Marked, \"medium grade\" galvanised, including tube fittings Viz Tees Socket bends elbows, union nipple etc screwed and socketed joint laid in trenches/under road with all fitting complete all as specified. |
| 128 | M& L for Gun-metal, globe or gate valves, 40 mm bore of pipe with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 129 | Supply and fixing exhaust fan steel body, AC single Phase 230V, AC supply, 300 mm sweep with bird guard four blades with louvers all fixing arrangements like wall hole, material etc complete all as specified and as directed by Engineer-in-charge. |
| 130 | Supply and fixing complete set of 1x10 watt LED retrofit type bulkhead fitting luminaries die cast aluminium alloy body heat resistant prismatic glass cover with specially designed gasket lamp holder etc complete with all accessories and including connecting up with twin core twisted flexible copper conductor cable with suitable sizeincluding taking down old Unserviceable light fitting any type as per specification & directed by Engr-in-charge. |
| 131 | Supply and fixing LED street light 25 watt lumaniries comprising of epoxy powder coated housing, enclosed with golass cover including 40mm GI bracket and fixing arrangement in road light, security light etc complete with all accessories and including connecting up with twin core twisted flexible copper conductor cable 1.5 Sqmm with suitable size and including taking down defective unserviceable street light any size as per speification & as per directed by Engineer-in-charge. |
| 132 | Supply and spread dry fine aggregate sand in trenches for cable cushioning all as specified onboth top and bottom of cable including ramming all as specified and directed by Engr-in-Charge.Note :For the purpose of payment the punned thickness only measured. |
| 133 | Supplying and laying factory made un-reinforced precast concrete cable cover, class EHV, type 1 with peak, size 250mmx 150mm x 40mm standard size laid in trenches of across the cable protection all as specified and directed by Engr-in-Charge. |
| 134 | Supply and Laying in replacement XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 16 Sqmm 4 core in trenches/floors/wall and under road including connecting with suitable aluminium lugs and including taking up defective unserviceable cable of the any sizes all as specified and directed by Engr-in-Charge. Note: Earth work, Sand cushioning, GI pipe and cable cover for protection will be measured and paid separately. |
| 135 | Supply & fixing ceiling fans complete with blades, down rods, remote and accessories, 230 V, 1200mm sweep. Min air delivery 245 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as directed. |
| 136 | Supplying and fixingand commissioning of electric water heater (Geyser) storage type ABS body of capacity 25 litre, BEE approved 5 Star rating, 230 V , single Phase, AC supply, inner tank made out of heavy duty stainless steel sheet (Designed with single weld line, factory tested with hydraulic pressure as per latest IS code) with glass lined coating complete with all accessories such as safety valve, thermostate, NRV, connection piece PVC connection for hot and cold water, three core PVC insulated PVC Sheathed copper conductor flexible cable including15 Amp plug suitable for existing socket and fixing material, 04 No nut bolt grouting in wall in PCC (1:2:4) using 12.5mm graded stone aggregate for hanging the geyser and making good the disturbed surface complete all as specified and directed by Engr-in-Charge. |
| 137 | Supply and installation, commissioning of desert cooler electric driven (single phase), having nominal air flow capacity of 6000 CuM per hour (or nearest size).(*Steel body)deep galvanised steel thickness 1mm body and 1mm removal side and back panel single phase 230 volts,with submersible pump of suitable size (Maximum power consumption 250 volts) ISI mark (with float valve of 15mm dia, stop valve of 15 mm dia, nut washer PVC connections of 15mm dia to air cooler complete all as specified .Note : (a) : Sufficient length of 3 core PVE sheathed round copper cable size 23/076 to enable fixing in to plug point shall be provided by contractor. (b)Arrangement of power connections and water connections to the desert cooler will be included in installation.(c) No extra payment shall be made to float valve, stop valve, nut, wahser PVC connection, leakproof joints etc and making connection from GI pipe 15 mm dia to air cooler in this regards union for GI pipe ball valves brass complete including electric connection. (d) Contractor shall submit necessary company test certificate and purhase voucher and minimum warranty of 2 years complete all as specified and directed by Engr-in-Charge |
| 138 | M&L submain wiring with two single core PVC FRLSinsulatedstranded copper conductor cable of size 4 sqmm and same 4 sqmm for continuous earth wire drawn in to concealed PVC conduit and making good to disturbed area complete all as specified and directed by Engr-in-Charge. Note: Two run of wire, one run of earth wire and one round conduit shall be measured as one unit. |
| 139 | M&L for stop valve, cast copper alloy, screwed down, high pressure, fancy type, chromium plated 15mm bore of pipe, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 140 | S & F DBOX SRCD (Socket Residual Current Device) is ready plug & play all -in-one device that provides protection to humans from electric shock due to direct or indirect contact as well as provides protection from overload and short circuit faults Single polecomplete with one SPN MCB 20 Amps, 240 V, AC supply, and plug top all type as specified and directed . |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
