Tender For Repair To Certain Steel Furniture Items/Painting Of Steel Furniture Items Under Ge Dehradun., Dehradun-Uttarakhand

TDR : 48868666

Tender Notice
BOQ

Expired

Dehradun , Uttarakhand

Tender Brief : Tender For Repair To Certain Steel Furniture Items/Painting Of Steel Furniture Items Under Ge Dehradun.

Document Fees
₹ 500 /-

EMD
₹ 99800.0 /-

Tender Value
₹ 49.90 Lakhs /-

Submission Date
16-05-2025

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	Almirah Steel Med and Small FD-243 & 1032 : Removing old broken hinges and fixing new hinges of existing shape and size through gas welding complete all as specified and directed
2	Removing of unserviceable lock and Supply and fixing ofnewlock of 7 lever with duplicate key of best quality fancy type of existing shape and size complete all as specified and directed
3	Removing of unsv/Broken handles and Supply and fixing ofnew Chromium Plated handle of existing shape and size complete all as specified and directed
4	Removing of unserviceable rusted legs and Supply and fixing ofnew legs made out of MS Sheet 1.6mm thick of existing shape and size complete all as specified and directed
5	Removing of unserviceable rusted shutters and Supply and fixing ofnew shutter made out of MS Sheet 1.00mm thick of existing shape and size complete all as specified and directed
6	Removing of unserviceable rusted shelves and Supply and fixing ofnew shelves made out of MS sheet 1.00 mm thick of existing shape and size complete all as specified and directed
7	Providing MS clamps of suitable pattern to the shelves to hold shelves of existing shape and size complete all as specified and directed
8	Removing existing unserviceable 03Way locking device and Supply and fixing ofnew 03way locking device with plunger rod MS complete to match the original of suitable pattern to the locking system of Almirah steel of existing shape and size complete all as specified and directed
9	Material and labour for preperation of old surfaces of ALMIRAH MED &SMALL STEEL (Drawing No. FD-243 & FD-1032) by Sand Paper/Scrapper and applying 02 Coat of Hammertone Silver metallic (externally) and Smoke Grey paint (internally) (as approved) by Spray Painting Machine, complete all as specified and as directed.
10	Almirah Large Steel FD-1031, FD-67
11	Removing old broken hinges and fixing new hinges of existing shape and size through gas welding complete all as specified and directed
12	Removing of unserviceable lock and Supply and fixing ofNew lock of 7 lever with duplicate key of best quality fancy type of existing shape and size complete all as specified and directed
13	Removing of unsv/Broken handles and Supply and fixing ofnew Chromium Plated handle of existing shape and size complete all as specified and directed
14	Removing of unserviceable rusted legs and Supply and fixing ofnew legs made out of MS Sheet 1.6mm thick of existing shape and size complete all as specified and directed
15	Removing of unserviceable rusted shutters and Supply and fixing ofnew shutter made out of MS Sheet 1.00mm thick of existing shape and size complete all as specified and directed
16	Removing of unserviceable rusted shelves and Supply and fixing ofnew shelves made out of MS sheet 1.00 mm thick of existing shape and size complete all as specified and directed
17	Providing MS clamps of suitable pattern to the shelves to hold shelves of existing shape and size complete all as specified and directed
18	Removing existing unserviceable 03Way locking device and Supply and fixing ofnew 03way locking device with plunger rod MS complete to match the original of suitable pattern to the locking system of Almirah steel of existing shape and size complete all as specified and directed
19	Material and labour for preperation of old surfaces of ALMIRAH LARGE STEEL (Drawing No. FD-67 & FD-1031) by Sand Paper/Scrapper and applying 02 Coat of hammertone Silver metallic (externally) and Smoke Grey (internally) (as approved) by Spray Painting Machine, complete all as specified and as directed.
20	Chair Verandah FD-256, FD-19/259
21	Material and labour forwelding (full welding rod as a one spot) ofbroken part of CHAIR VERANDAH as shown on Drawing No. FD-19, FD-256 & FD-259, rubbing welded portion to obtain a smooth surface & taking out unserviceable part, complete all as specified and as directed.
22	Material and labour for mild steel Round Bar 12mm dia to cover the distance between RT & LT Leg alongwith the Seat Front Side orRear Side of CHAIR VERANDAH as shown on Drawing No. FD-19, FD-256 & FD-259 and welded, & taking out unserviceable Bar, complete all as specified and as directed.
23	Supply and fixing ofHARD RUBBER SHOE superior quality (as approved) fixing to Leg of CHAIR VERANDAH as shown on Drawing No. FD-19, FD-256 & FD-259 including taking out unserviceable Shoe, complete all as specified and as directed.
24	Material and labour for Re-canning of CHAIR VERANDAH in Godrej pattern with 4.0mm wide Half Round Oval Shape Plastic Cane (as approved) to Frame as shown on Drawing No. FD-19, FD-256 & FD-259 including taking out old/worn out Canning, complete all as specified and as directed.
25	Material and labour for removing/scrapping old worn out Paint from Steel Frame of CHAIR VERANDAH (Drawing No. FD-19, FD-256 & FD-259) by Sand Paper/Scrapper and applying One two of White Colour Synthetic Enamelled Paint (as approved) by Spray Painting Machine, complete all as specified and as directed.
26	Chair CBSteelWith Arms FD-75(M)
27	Removing of old broken Seat and Supply and fixing ofnew seat of Existing size with 50mm thick Foam cushion Pasted with suitable adhesive over 12mm thick plywood fixed on IInd Class HW frame & Seat surface covered with leatherite Rexin cover 2mm thick &screwed to track rail complete all as specified and as directed.
28	Removing of old broken Back and Supply and fixing ofnew seat of Existing size with 50mm thick Foam cushion Pasted with suitable adhesive over 12mm thick plywood fixed on IInd Class HW frame & Seat surface covered with leatherite Rexin cover 2mm thick &screwed to track rail complete all as specified and as directed
29	Material and labour for ARMS REST made out of Modular plastic Arms for CHAIR CBA STEEL WITH ARMS, fixed with suitable size Screws and Painting with Black Colour Synthetic Enamelled Paint (as approved) on Back Frame as shown on Drawing No. FD-75(M) including taking out unserviceable Arms Rest, complete all as specified and as directed.
30	Material and labour for mild steel Flat Iron 25x3.0mm as RUNNER of length 350mm (approx), making hole for fixing End and Other End welded to CHAIR CBA STEEL WITH ARMSsize35x25x3 mm,FD-75(M) including taking out unserviceable Runner complete all as specified and as directed.
31	Supply and fixing ofPVC CAP at the top of Back Steel Pipe of CHAIR CBA STEEL WITH ARMS as shown on Drawing No. FD-75(M) including taking out unserviceable Cap, complete all as specified and as directed.
32	Supply and fixing ofHARD RUBBER SHOE superior quality (as approved) fixing to Leg of CHAIR CBA STEEL WITH ARMS as shown on Drawing No. FD-75(M) including taking out unserviceable Shoe, complete all as specified and as directed.
33	Material and labour for removing/scrapping old worn out Paint from exposed Steel Frame of CHAIR CBA STEEL WITH ARMS (Drawing No. FD-75(M)) by Sand Paper/ Scrapper and applying Two coat (OG) of Synthetic Enamelled Paint (as approved) by Spray Painting Machine, complete all as specified and as directed.
34	Chair CB Steel without Arms FD-75(M)
35	Removing of old broken Seat and Supply and fixing ofnew seat of Existing size with 50mm thick Foam cushion Pasted with suitable adhesive over 12mm thick plywood fixed on IInd Class HW frame & Seat surface covered with leatherite Rexin cover 2mm thick &screwed to track rail complete all as specified and as directed
36	Removing of old broken Back and Supply and fixing ofnew seat of Existing size with 50mm thick Foam cushion Pasted with suitable adhesive over 12mm thick plywood fixed on IInd Class HW frame & Seat surface covered with Best quality tapestry Cloth &screwed to track rail complete all as specified and as directed.(NOTE:-Not Less than 350/-mtr)
37	Material and labour for mild steel Flat Iron 25x5.0mm as RUNNER of length 350mm (approx), making hole for fixing End and Other End welded to CHAIR CBA STEEL W/O ARMSsize25x5 mm, applying two coats of Synthetic Enamel Paint over a coat of Red Oxide Zinc Chrome Primer on Steel Surfaces as shown on Drawing No. FD-75(M) including taking out unserviceable Runner, complete all as specified and as directed.
38	Supply and fixing ofPVC CAP at the top of Back Steel Pipe of CHAIR CBA STEEL W/O ARMS as shown on Drawing No. FD-75(M) including taking out unserviceable Cap, complete all as specified and as directed.
39	Supply and fixing ofHARD RUBBER SHOE superior quality (as approved) fixing to Leg of CHAIR CBA STEEL W/O ARMS as shown on Drawing No. FD-75(M) including taking out unserviceable shoes, complete all as specified and as directed.
40	Provn of 02 Nos of 25mm dia round stiffner welded from seat to bottom of chair CB steel w/o handrest to support the seat, complete all as specified and as directed
41	Material and labour for removing/scrapping old worn out Paint from exposed Steel Frame of CHAIR CBA STEEL WITH ARMS (Drawing No. FD-75(M)) by Sand Paper/Scrapper and applying One Coat of Synthetic Enamelled Paint (as approved) by Spray Painting Machine, complete all as specified and as directed.
42	Chair Computer and Chair Revolving Various Types TP
43	Material and labour for TAPESTRY/FABRIC CLOTH over SYNTHETIC FOAM 50 - 75 mm thick (as approved) for SEAT/BACK of CHAIR COMPUTER/ CHAIR REVOLVING including taking out old worn out Tapestry/ Fabric Cloth and Foam from Chairs, complete all as specified and as directed.( Tapestry Cloth should not less than @350/-mtr)
44	Material and labour for CASTOR WHEEL (as approved) of CHAIR COMPUTER/CHAIR REVOLVING including taking out unserviceable or broken Castor Wheel from Chairs, complete all as specified and as directed.
45	Material and labour for BOTTOM BASE made out of MS steel (as approved) of CHAIR COMPUTER/ CHAIR VISITOR/ CHAIR REVOLVING including taking out unserviceable Bottom Base from Chairs, complete all as specified and as directed.
46	Material and labour for GAS LIFTING HYDROLIC SYSTEM of CHAIR COMPUTER/ CHAIR VISITOR/ CHAIR REVOLVING including taking out unserviceable Gas Lifting Hydrolic System from Chairs, complete all as specified and as directed.
47	Material and labour for HANDLE of CHAIR COMPUTER/ CHAIR VISITOR/ CHAIR REVOLVING including taking out unserviceable Handle from Chairs, complete all as specified and as directed.
48	Chair School with Hand Board FD-140/ FD-48/ FD/E6/MAP/05
49	Material and labour for Moulded PVC/wooden seat and backof CHAIR SCHOOL WITH HAND BOARD as shown on Drawing No. FD/E6/MAP/05/ FD-140/ FD-48 including taking out unserviceable seat back, complete all as specified and as directed.
50	Material and labour for Hand board made out of WPC Boardof CHAIR SCHOOL WITH HAND BOARD as shown on Drawing No. FD/E6/MAP/05/ FD-140/ FD-48 including taking out unserviceable seat back, complete all as specified and as directed.
51	Material and labour for for Welding of Broken Leg with mild steel Round Pipe of size 20mm x 1.6 mm thick (as required) for CHAIR SCHOOL WITH HAND BOARDas shown on Drawing No. FD/E6/MAP/05/ FD-140/ FD-48, & rest complete all as specified and as directed.
52	Material and labour for removing/scrapping old worn out Paint from CHAIR SCHOOL WITH HAND BOARD(Drawing No. FD/E6/MAP/05/ FD-140/ FD-48) by Sand Paper/ Scrapper and applying Two Coats of Black synthetic Enamelled Paint (as approved) by Spray Painting Machine, complete all as specified and as directed.
53	Material and labour forwelding (full round on pipe as a one spot) ofbroken part of CHAIR SCHOOL WITH HAND BOARD as shown on Drawing No. FD/E6/MAP/05/, FD-140, FD-48 rubbing welded portion to obtain a smooth surface, necessary preperation of surfaces, applying two coats ofBlack Syntheic enamel paint (as approved) by spray painting machine over a coat of red oxide primer including taking out unserviceable part, complete all as specified and as directed.
54	Locker Bed Side Steel FD-257/1029
55	Material and labour for SHELF made out of 1.0mm thick mild steel Sheet of LOCKER BED SIDE STEEL and made to shape and size as shown on Drawing No. FD-257 & FD-1029, & including taking out unserviceable Shelf, complete all as specified and as directed.
56	Material and labour for DOOR made out of 1.0mm thick mild steel Sheet of LOCKER BED SIDE STEEL and made to shape and size as shown on Drawing No. FD-257 & FD-1029, & taking out unserviceable Door, complete all as specified and as directed.
57	Material and labour for LEG made out of 1.6mm thick mild steel Sheet of LOCKER BED SIDE STEEL and made to shape and size as shown on Drawing No. FD-257 & FD-1029, & taking out unserviceable Leg, complete all as specified and as directed.
58	Material and labour foraluminum HASP & STAPPLEof size 100mmfor LOCKER BED SIDE STEEL and fixed as shown on Drawing No. FD-257 & FD-1029including taking out unserviceable Hasp & Stapple, complete all as specified and as directed.
59	Material and labour for mild steel HANDLE (as approved) of LOCKER BED SIDE STEEL and fixing to Almirah as shown on Drawing No. FD-257 & FD-1029 including taking out unserviceable Handle, complete all as specified and as directed.
60	Material and labour for mild steel HINGE (as approved) 50mm in size suitable for LOCKER BED SIDE STEEL and fixing to Almirah as shown on Drawing No. FD-257 & FD-1029 including taking out unserviceable Hinge, complete all as specified and as directed.
61	Material and labour for complete removing/scrapping old worn out Paint from LOCKER BED SIDE STEEL (Drawing No. FD-257 & FD-1029) by Sand Paper/Scrapper and applying 02 coat of hammertone Paint (as approved) by Spray Painting Machine over a coat of Red Oxide Zinc Chrome Primer, complete all as specified and as directed.
62	Couch Examination FD- 122
63	Material and labour for TOP of Couch Examination of complete with hassion cloth ,spring,25mm,thick 32 density foam duly leatherite upholstered as shown on Drg.FD-122 including taking out unserviceable top complete all as specified and as directed.
64	Material and labour for mild steel Square Pipe of size 25mm, 1.6mm thick as LEG and fixing/ welded to COUCH EXAMINATION as shown on Drawing No. FD-122,&taking out unserviceable Leg, complete all as specified and as directed.
65	Material and labour for mild steel Squar Pipe of size 25mm, 1.6mm thick as LONG RAIL and fixing/welded to COUCH EXAMINATION as shown on Drawing No. FD-122, Long Rail, complete all as specified and as directed.
66	Material and labour for mild steel Square Pipe of size 25mm, 1.6mm thick as SHORT RAIL and fixing/welded to COUCH EXAMINATION as shown on Drawing No. FD-122, complete all as specified and as directed.
67	Material and labour for mild steel Square Pipe of size 25mm, 1.6mm thick as SIDE STIFFNER and fixing/welded to COUCH EXAMINATION as shown on Drawing No. FD-122, complete all as specified and as directed.
68	Material and labour for mild steel Square Pipe of size 25mm, 1.6mm thick as CENTRAL STIFFNER and fixing/welded to COUCH EXAMINATION as shown on Drawing No. FD-122, complete all as specified and as directed.
69	Material and labour for complete removing/scrapping old worn out Paint from COUCH EXAMINATION (Drawing No. FD-122 by Sand Paper/Scrapper and applying Two Coats of Synthetic Enamelled Paint (as approved) by Spray Painting Machine over a coat of Red Oxide Zinc Chrome Primer, complete all as specified and as directed.
70	Screen Movable FD- 83, HFD-2015
71	Material and labour for mild steel conduitPipe of size 20mm dia, 1.6mm thick as unserviceable part of frame and fixing/welded to SCREEN MOVABLE as shown on Drawing No. FD-83/2015, & taking out unserviceable part of frame , complete all as specified and as directed.
72	Material and labour for Wheel(as approved) of SCREEN MOVABLE and fixing as shown on Drawing No. FD-83/ HFD- 2015 including taking out unserviceable Wheel, complete all as specified and as directed.
73	Material and labour for complete removing/scrapping old worn out Paint from SCREEN MOVABLE by Sand Paper/Scrapper and applying Two Coats of Synthetic Enamelled Paint (as approved) by Spray Painting Machine over a coat of Red Oxide Zinc Chrome Primer, complete all as specified and as directed.
74	Chair Writing FD/MAP/12
75	Material and labour forSeat of CHAIR WRITING and Supply and fixing ofof complete Seatincluding taking out old worn out Tapestry/ Fabric Cloth and Foam from Chairs, complete all as specified and as directed.
76	Material and labour forBack of CHAIR WRITING and Supply and fixing ofof complete Backincluding taking out old worn out Tapestry/ Fabric Cloth and Foam from Chairs, complete all as specified and as directed.
77	Material and labour for HANDLE of CHAIR WRITINGincluding taking out unserviceable Handle from Chairs, complete all as specified and as directed.
78	Material and labour for mild steel Flat Iron 25x3.0mm as RUNNER of length 500mm (approx),fixing one End and Other End welded to CHAIR WRITING, applying two coat of Synthetic Enamel Paint over a coat of Red Oxide Zinc Chrome Primer on Steel Surfaces as shown on Drawing No. FD/MAP/12 including taking out unserviceable Runner, complete all as specified and as directed.
79	Rack Steel 6 Tier FD-106,1038
80	Material and labour for SHELF made out of 1.0 mm thick mild steel Sheet ofRACK 6 TIER STEEL and made to shape and size as shown on Drawing No. FD-106 & FD-1038, & complete all as specified and as directed.
81	Taking out unservisiable ANGLE IRON and supply & fixing new angle iron fo size 40x40x4 mm for FD-1038 and 30x30x3mm for FD-106 ofRACK 6 TIER STEEL as shown on Drawing, rest all as specified and as directed.
82	Material and labour for complete removing/scrapping old worn out Paint from RACK 6 TIER STEEL (Drawing No. FD-106 & FD-1038) by Sand Paper/Scrapper and applying One Coat of OG Synthetic Enamelled Paint (as approved) by Spray Painting Machine over a coat of Red Oxide Zinc Chrome Primer, complete all as specified and as directed.
83	Trestle Store Steel FD-1043
84	Material and labour forwelding (full round of angle as a one spot) ofbroken part of TRESTLE STORE STEEL as shown on Drawing No. FD-1043, & complete all as specified and as directed.
85	Material and labour for complete removing/scrapping old worn out Paint from TRESTLE STORE STEEL (Drawing No. FD-1043) by Sand Paper/Scrapper and applying two Coat of Hammertone Paint (as approved) by Spray Painting Machine over a coat of Red Oxide Zinc Chrome Primer, complete all as specified and as directed.
86	Foam with Back FD-78
87	Material and labour for SEATofFORM WITH BACK made of single plank of 1st class hard teak wood (18/19mm)of size 1800 mm x 255 mm x 25mm as shown on Drawing No. FD-78including taking out unserviceable seat, complete all as specified and as directed.
88	Material and labour for BACKofFORM WITH BACK made of single plank of 1st class hard teak wood of size 1800mmx150mmx19mm as shown on Drawing No. FD-78including taking out unserviceable seat, complete all as specified and as directed.
89	Material and labour for for Broken Leg with mild steel Square Pipe of size 25mm x1.6 mm thick(as required) for FORM WITH BACKas shown on Drawing No. FD-78, complete all as specified and as directed.
90	Material and labour for removing/scrapping old worn out Paint from FORM WITH BACK (Drawing No. FD-78) by Sand Paper/ Scrapper and applying Two Coats of OG Synthetic Enamelled Paint (as approved) by Spray Painting Machine, complete all as specified and as directed.
91	Material and labour for welding (full round on pipe as a one spot) ofbroken part of FORM WITH BACK as shown on Drawing No. FD-78, rubbing welded portion to obtain a smooth surface, complete all as specified and as directed.
92	Form without Back FD-77/ FD-1027
93	Material and labour for SEATofFORM WITHOUT BACK made of single plank of 1st class hard teak wood (18/19 mm) of size 1800mmx255mm x 25mm as shown on Drawing No. FD-77/ FD-1027including taking out unserviceable seat, complete all as specified and as directed.
94	Material and labour for for Broken Leg with mild steel Square Pipe of size 25mm x1.6 mm thick(as required) for FORM WITHOUT BACKas shown on Drawing No. FD-77 / FD-1027 & complete all as specified and as directed.
95	Material and labour for removing/scrapping old worn out Paint from FORM WITHOUT BACK (Drawing No. FD-7&/ FD-1027) by Sand Paper/ Scrapper and applying Two Coats of OG Synthetic Enamelled Paint (as approved) by Spray Painting Machine, complete all as specified and as directed.
96	Material and labour forwelding (full round on pipe as a one spot) ofbroken part of FORM WITHOUT BACK as shown on Drawing No. FD-77/ FD-1027 rubbing welded portion to obtain a smooth surface, & complete all as specified and as directed.
97	Teapoy Varandha Fd/E6/MAP/18 & FD-255
98	Material and labour for TOP of TEAPOY VARANDHA of MDF Board 18/19 mm thick, exterior grade ISI marked (MAKE : GREEN PLY/CENTURY/ARCHIED), providing Teak Wood Beading 5.0 mm thick all round, applying french polish upto the desired finish on beading, as shown on Drawing No. FD/E6/MAP/18 or FD- 255 including taking out unserviceable Top, complete all as specified and as directed.
99	Material and labour for for Welding of Broken Leg with mild steel Square Pipe of size 18mm x 1.6 mm thick / 20 mm round pipe 1.6 mm thick (as required) for TEAPOY VARANDHAas shown on Drawing No. FD/E6/MAP/18 and FD-1009, complete all as specified and as directed.
100	Material and labour for removing/scrapping old worn out Paint from TEAPOY VARANDHA(Drawing No. FD/E6/MAP/18 and FD-255) by Sand Paper/ Scrapper and applying Two Coats of Black Synthetic Enamelled Paint (as approved) by Spray Painting Machine, complete all as specified and as directed.
101	Material and labour forwelding (full round on pipe as a one spot) ofbroken part of TEAPOY as shown on Drawing No. FD/E6/MAP/18 and FD-255, complete all as specified and as directed.
102	Shoe Rack FD/E6/MAP
103	Material and labour forwelding (full round on pipe as a one spot) ofbroken part of RACK SHOE as shown on Drawing , rubbing welded portion to obtain a smooth surface, necessary preperation of surfaces, applying two coats of Syntheic enamel paint (as approved) by spray painting machine over a coat of red oxide primer, complete all as specified and as directed.
104	Material and labour for preperation of old surfaces of Shoe Rack Steel (Drawing No. FD/MAP/18) by Sand Paper/Scrapper and applying 02 Coat ofHammertone painting of approved colour complete all as specified and as directed.
105	Bed Hard Steel FD/E6/MAP/08R
106	Material and labour for HEAD SIDE BOARD of BED HARD MS TUBINGof Prelaminated MDF Board 18/19mm thick, exterior grade, ISI marked and fixing as shown on Drawing No. FD/E6/MAP/08R including taking out unserviceable Head Side Board, complete all as specified and as directed.
107	Material and labour for FOOT REST BOARD of BED HARD MS TUBING of Prelaminated MDF Board 18/19mm thick, exterior grade, ISI marked and fixing as shown on Drawing No. FD/E6/MAP/08R including taking out unserviceable Foot Rest Board, complete all as specified and as directed.
108	Material and labour for Plywood TOP 12mm thick BWR grade confirming to IS-303, ISI marked and fixing to BED HARD MS TUBING as shown on Drawing No. FD/E6/MAP/08R including taking out unserviceable Plywood Top, complete all as specified and as directed.
109	Material and labour for MIDDLE STIFFENER made out from mild steel Square Tube/Pipe 25mmx25mm of 1.6mm wall thickness, adjusting existing 2 No. Stiffeners and fixing to BED HARD MS TUBING and fixing as shown on Drawing No. FD/E6/MAP/08R, & complete all as specified and as directed.
110	Provn of mild steel CLIT of size 25mmx25mmx6mm with single hole on Short Rails for Support of Plywood Top and fixing to BED HARD MS TUBINGand fixing as shown on Drawing No. FD/E6/MAP/08R,&, complete all as specified and as directed.
111	Material and labour for complete removing/scrapping old worn out Paint on Steel Surfaces of BED HARD MS TUBING (Drawing No. FD/E6/MAP/08R by Sand Paper/Scrapper and applying Two Coat of Black Hammertone Paint (as approved) by Spray Painting Machine over a coat of Red Oxide Zinc Chrome Primer, complete all as specified and as directed.
112	Charpoy MS Tubing with Plywood Top FD/MAP-II/01
113	Material and labour for Plywood TOP 12mm thickBWR grade confirming to IS-303, ISI marked and fixing to CHARPOY MS TUBING WITH PLYWOOD TOP as shown on Drawing No. FD/MAP-II/01 including taking out unserviceable Plywood Top, complete all as specified and as directed.
114	Material and labour for MIDDLE STIFFENER made out from mild steel Square Tube/Pipe 25mmx25mm of 1.6mm wall thickness, adjusting existing 2 No. Stiffeners and fixing to CHARPOY MS TUBING WITH PLYWOOD TOP and fixing as shown on Drawing No. FD/MAP-II/01, complete all as specified and as directed.
115	Provn of mild steel CLIT of size 25mmx25mmx6mm with single hole on Short Rails for Support of Plywood Top and fixing to CHARPOY MS TUBING WITH PLYWOOD TOP and fixing as shown on Drawing No. FD/MAP-II/01, complete all as specified and as directed.
116	Material and labour for complete removing/scrapping old worn out Paint on Steel Surfaces of CHARPOY MS TUBING WITH PLYWOOD TOP (Drawing No. FD/MAP-II/01 by Sand Paper/Scrapper and applying Two Coat of Hammertone black Paint (as approved) by Spray Painting Machine over a coat of Red Oxide Zinc Chrome Primer, complete all as specified and as directed.
117	Table Dining OR\"s FD-165(M)
118	Material and labour for TOP of TABLE DINING OR\"S of blockboard (ISI) 18/19 mm thick with 22 guage aluminium sheet (MAKE: GREENPLY/CENTURY/Archid), shown on Drawing No. FD-165(M) including taking out unserviceable Top, complete all as specified and as directed.
119	Material and labour for mild steel Square Pipe of size 20mm, 1.6mm thick as LEG having length from 300mm to 500mm and fixing/ welded to TABLE DINING OR\"S as shown on Drawing No. FD-165(M), & including taking out unserviceable Leg, complete all as specified and as directed.
120	Material and labour for mild steel Square/Round Pipe of size 25mm, 1.6mm thick as LONG RAIL and fixing/welded to TABLE DINING OR\"S as shown on Drawing No. FD-165(M), complete all as specified and as directed.
121	Material and labour for mild steel Square/Round Pipe of size 25mm, 1.6mm thick as SHORT RAIL and fixing/welded to TABLE DINING OR\"S as shown on Drawing No. FD-165(M) with and including taking out unserviceable Short Rail, complete all as specified and as directed.
122	Material and labour for mild steel Square/Round Pipe of size 25mm, 1.6mm thick as SIDE STIFFNER and fixing/welded to TABLE DINING ORS as shown on Drawing No. FD-165(M), complete all as specified and as directed.
123	Supply and fixing ofHARD RUBBER SHOE superior quality (as approved) fixing to Leg of TABLE COMPUTER as shown on Drawing including taking out unserviceable Shoe, complete all as specified and as directed.
124	Material and labour for complete removing/scrapping old worn out Paint from TABLE DINING OR\"S (Drawing No. FD-165(M) by Sand Paper/Scrapper and applying Two Coats of Black Synthetic Enamelled Paint (as approved) by Spray Painting Machine over a coat of Red Oxide Zinc Chrome Primer, complete all as specified and as directed.
125	Table Office Officer SteelFD-84,1003
126	Material and labour for TOP of TABLE OFFICE OFFICER STEEL of Prelaminated MDF Board 18/19 mm thick, exterior grade ISI marked (MAKE : GREEN PLY/CENTURY/ ARCHIED), providing Teak Wood Beading 5.0 mm thick all round,applying french polish upto the desired finish on beading, as shown on Drawing No. FD-84 & FD-1003 including taking out unserviceable Top, complete all as specified and as directed.
127	Material and labour for DRAWER made out of 1.6mm thick mild steel Sheet and fixing to TABLE OFFICE OFFICER STEEL as shown on Drawing No. FD-84 & FD-1003, enamel paint (as approved) & taking out unserviceable Drawer, complete all as specified and as directed.
128	Material and labour for CENTRAL STIFFENER made out of mild steel Square Pipe of 25mm and fixing to TABLE OFFICE OFFICER STEEL as shown on Drawing No. FD-84 & FD-1003, &taking out unserviceable Central Stiffener, complete all as specified and as directed.
129	Material and labour for SIDE STIFFENER made out of mild steel Square Pipe of 25mm and fixing to TABLE OFFICE OFFICER STEEL as shown on Drawing No. FD-84 & FD-1003, &including taking out unserviceable Side Stiffener, complete all as specified and as directed.
130	Material and labour for LOCK (MAKE : GODREJ) of TABLE OFFICE OFFICER STEEL and fixing as shown on Drawing No. FD-84 & FD-1003 including taking out unserviceable Lock, complete all as specified and as directed.
131	Material and labour for mild steel HANDLE of TABLE OFFICE OFFICER STEEL and fixing as shown on Drawing No. FD-84 & FD-1003 including taking out unserviceable Handle, complete all as specified and as directed.
132	Material and labour for for Welding of Broken Leg with mild steel Square Pipe of size 25mm (as required) for TABLE OFFICE OFFICER STEEL as shown on Drawing No. FD-84 & FD-1003, & complete all as specified and as directed.
133	Material and labour for removing/scrapping old worn out Paint from TABLE OFFICE OFFICER STEEL (Drawing No. FD-84 & FD-1003) by Sand Paper/Scrapper and applying Two Coats of OG Synthetic Enamelled Paint (as approved) by Spray Painting Machine, complete all as specified and as directed.
134	Table Office Clk Steel Fd-84, 381 & 1004
135	Material and labour for TOP of TABLE OFFICE CLERK STEEL of Prelaminated MDF Board 18/19 mm thick, exterior grade ISI marked (MAKE : GREEN PLY/CENTURY), providing Teak Wood Beading 5.0 mm thick all round, applying french polish upto the desired finish on beading as shown on Drawing No. FD-84, FD-381 & FD-1004 including taking out unserviceable Top, complete all as specified and as directed.
136	Material and labour for DRAWER made out of 1.6mm thick mild steel Sheet and fixing to TABLE OFFICE CLERK STEEL as shown on Drawing No. FD-84, FD-381 & FD-1004,& including taking out unserviceable Drawer, complete all as specified and as directed.
137	Material and labour for CENTRAL STIFFENER made out of mild steel Square Pipe of 25mm and fixing to TABLE OFFICE CLERK STEEL as shown on Drawing No. FD-84, FD-381 & FD-1004, &taking out unserviceable Central Stiffener, complete all as specified and as directed.
138	Material and labour for SIDE STIFFENER made out of mild steel Square Pipe of 25mm and fixing to TABLE OFFICE CLERK STEEL as shown on Drawing No. FD-84, FD-381 & FD-1004, & complete all as specified and as directed.
139	Material and labour for LOCK (MAKE : GODREJ) of TABLE OFFICE CLERK STEEL and fixing as shown on Drawing No. FD-84, FD-381 & FD-1004 including taking out unserviceable Lock, complete all as specified and as directed.
140	Material and labour for mild steel HANDLE of TABLE OFFICE CLERK STEEL and fixing as shown on Drawing No. FD-84, FD-381 & FD-1004 including taking out unserviceable Handle, complete all as specified and as directed.
141	Material and labour for for Welding of Broken Leg with mild steel Square Pipe of size 25mm (as required) for TABLE OFFICE CLERK STEEL as shown on Drawing No. FD-84, FD-381 & FD-1004, &complete all as specified and as directed.
142	Material and labour for removing/scrapping old worn out Paint from TABLE OFFICE CLERK STEEL (Drawing No. FD-84, FD-381 & FD-1004) by Sand Paper/ Scrapper and applying Two Coats of OG Synthetic Enamelled Paint (as approved) by Spray Painting Machine, complete all as specified and as directed.
143	Table 3\"x2\" without Drawer FD-1007
144	Material and labour for TOP of TABLE 3\"X2\"WITH OUT DRAWER of Prelaminated MDF Board 18/19 mm thick, exterior grade ISI marked (MAKE : GREEN PLY/CENTURY), providing Teak Wood Beading 5.0 mm thick all round, applying french polish upto the desired finish on beading, as shown on Drawing No. FD-1007including taking out unserviceable Top, complete all as specified and as directed.
145	Material and labour for CENTRAL STIFFENER made out of mild steel Square Pipe of 25mm and fixing to TABLE 3\"X2\"WITH OUT DRAWERas shown on Drawing No. FD-1007, & complete all as specified and as directed.
146	Material and labour for SIDE STIFFENER made out of mild steel Square Pipe of 25mm and fixing to TABLE 3\"X2\"WITH OUT DRAWERas shown on Drawing No. FD-1007, & complete all as specified and as directed.
147	Material and labour for for Welding of Broken Leg with mild steel Square Pipe of size 25mm (as required) for TABLE 3\"X2\"WITH OUT DRAWERas shown on Drawing No. FD-1007, & Rest complete all as specified and as directed.
148	Material and labour for removing/scrapping old worn out Paint from TABLE 3\"X2\"WITH OUT DRAWER(Drawing No. FD-1007) by Sand Paper/ Scrapper and applying Two Coats of OG Synthetic Enamelled Paint (as approved) by Spray Painting Machine, complete all as specified and as directed.
149	Table 3\"x2\" with Drawer FD-1008
150	Material and labour for TOP of TABLE 3\"X2\" WITHDRAWER of Prelaminated MDF Board 18/19 mm thick, exterior grade ISI marked (MAKE : GREEN PLY/CENTURY), providing Teak Wood Beading 5.0 mm thick all round, applying french polish upto the desired finish on beading as shown on Drawing No. FD-1008 including taking out unserviceable Top, complete all as specified and as directed.
151	Material and labour for DRAWER made out of 1.6mm thick mild steel Sheet and fixing to TABLE 3\"X2\" WITHDRAWER as shown on Drawing No. FD-1008, & taking out unserviceable Drawer, complete all as specified and as directed.
152	Material and labour for CENTRAL STIFFENER made out of mild steel Square Pipe of 25mm and fixing to TABLE 3\"X2\" WITH DRAWER as shown on Drawing No. FD-1008, & complete all as specified and as directed.
153	Material and labour for SIDE STIFFENER made out of mild steel Square Pipe of 25mm and fixing to TABLE 3\"X2\" WITH DRAWER as shown on Drawing No. FD-1008, & complete all as specified and as directed.
154	Material and labour for LOCK (MAKE : GODREJ) of TABLE 3\"X2\" WITHDRAWER and fixing as shown on Drawing No. FD-1008 including taking out unserviceable Lock, complete all as specified and as directed.
155	Material and labour for mild steel HANDLE of TABLE 3\"X2\" WITH DRAWER and fixing as shown on Drawing No. FD-1008 including taking out unserviceable Handle, complete all as specified and as directed.
156	Material and labour for for Welding of Broken Leg with mild steel Square Pipe of size 25mm (as required) for TABLE 3\"X2\" WITH DRAWER as shown on Drawing No. FD-1008, &complete all as specified and as directed.
157	Material and labour for removing/scrapping old worn out Paint from TABLE 3\"X2\" WITHDRAWER (Drawing No. FD-1008) by Sand Paper/ Scrapper and applying Two Coats of OG Synthetic Enamelled Paint (as approved) by Spray Painting Machine, complete all as specified and as directed.
158	Table 900x 900mm Steel FD-1009
159	Material and labour for TOP of TABLE 3\"X3\"WITH OUT DRAWER of Prelaminated MDF Board 18/19 mm thick, exterior grade ISI marked (MAKE : GREEN PLY/CENTURY/ARCHIED), providing Teak Wood Beading 5.0 mm thick all round, applying french polish upto the desired finish on beading, as shown on Drawing No. FD-1009including taking out unserviceable Top, complete all as specified and as directed.
160	Material and labour for for Welding of Broken Leg with mild steel Square Pipe of size 25mm (as required) for TABLE 3\"X3\"WITH OUT DRAWERas shown on Drawing No. FD-1009, & complete all as specified and as directed.
161	Material and labour for removing/scrapping old worn out Paint from TABLE 3\"X3\"WITH OUT DRAWER(Drawing No. FD-1009) &, complete all as specified and as directed.
162	Material and labour forwelding (full round on pipe as a one spot) ofbroken part of TABLE 3\"X3\" STEEL as shown on Drawing No. FD-1009, rubbing welded portion to obtain a smooth surface, necessary preperation of surfaces, applying two coats of Syntheic enamel paint (as approved) by spray painting machine over a coat of red oxide primer including taking out unserviceable part, complete all as specified and as directed.
163	Table Bed Side FD/E6/MAP
164	Material and labour for TOP of TABLE BED SIDE of MDF Board 18/19 mm thick, exterior grade ISI marked (MAKE: GREEN PLY/CENTURY/ARCHIED), providing Teak Wood Beading 5.0 mm thick all round, applying french polish upto the desired finish on beading, as shown on Drawing including taking out unserviceable Top, complete all as specified and as directed.
165	Material and labour for Side/Back of TABLE BED SIDE of MDF Board 18/19 mm thick, exterior grade ISI marked (MAKE : GREEN PLY/CENTURY/ARCHIED), providing Teak Wood Beading 5.0 mm thick all round, applying french polish upto the desired finish on beading, as shown on Drawing including taking out unserviceable side/back, complete all as specified and as directed.
166	Material and labour for UPPER DRAWER of TABLE BED SIDE of MDF Board 18/19 mm thick, exterior grade ISI marked (MAKE : GREEN PLY/CENTURY/ARCHIED)as shown on Drawing including taking out unserviceable Upper drawer, complete all as specified and as directed.
167	Material and labour for LOWER DRAWERof TABLE BED SIDE of MDF Board 18/19 mm thick, exterior grade ISI marked (MAKE : GREEN PLY/CENTURY/ARCHIED)as shown on Drawing including taking out unserviceable lower drawer, complete all as specified and as directed.
168	Material and labour for LEGof TABLE BED SIDE of MS squre pipe 25x25 mm x 1.6 mm as shown on Drawing including taking out unserviceable leg, complete all as specified and as directed.
169	Table Computer FD/E6/MAP
170	Material and labour for TOP of TABLE COMPUTER of Prelaminated MDF Board 18/19 mm thick, exterior grade ISI marked (MAKE : GREEN PLY/CENTURY/ ARCHIED), providing Teak Wood Beading 5.0 mm thick all round,applying french polish upto the desired finish on beading, as shown on Drawingincluding taking out unserviceable Top, complete all as specified and as directed.
171	Material and labour for DRAWER made out of Prelaminated MDF Board 18/19 mm thick, exterior grade ISI marked (MAKE : GREEN PLY/CENTURY/ ARCHID) and fixing to TABLE COMPUTER as shown on Drawing ,including taking out unserviceable Drawer, complete all as specified and as directed.
172	Material and labour for LOCK (MAKE : GODREJ) of TABLE COMPUTER and fixing as shown on Drawingincluding taking out unserviceable Lock, complete all as specified and as directed.
173	Material and labour for mild steel HANDLE of TABLE COMPUTER and fixing as shown on Drawing including taking out unserviceable Handle, complete all as specified and as directed.
174	Supply and fixing ofHARD RUBBER SHOE superior quality (as approved) fixing to Leg of TABLE COMPUTER as shown on Drawing including taking out unserviceable Shoe, complete all as specified and as directed.
175	Locker SKD 562
176	Removing old broken hinges and fixing new hinges through gas welding of existing shape and size complete all as specified and directed
177	Removing of unserviceable lock and Supply and fixing ofNew lock of 7 lever with duplicate key of best quality fancy type of existing shape and size complete all as specified and directed
178	Removing of unsv/Broken handles and Supply and fixing ofnew Chromium Plated handle of existing shape and size complete all as specified and directed
179	Removing of unserviceable rusted legs and Supply and fixing ofnew legs made out of MS Sheet 1.6mm thick of existing shape and size complete all as specified and directed
180	Removing of unserviceable rusted shutters and Supply and fixing ofnew shutter made out of MS Sheet 1.00mm thick of existing shape and size complete all as specified and directed
181	Removing of unserviceable rusted shelves and Supply and fixing ofnew shelves of reqd size & shape, made out of MS sheet 1mm thick of existing shape and size complete all as specified and directed
182	Material and labour for Removing of old worn out paint from exposed steel frame of locker SKD-562 by sand paper/scrapper and applying two coat of hammer tone paint by Spray painting machine complete all as specified and directed
183	Repair/Refixing ply top charpoy GI pipe
184	Removing of old unservicable plywood and Supply and fixing ofnew 12mm thick plywood of size 1980x900 mm BWR type (Nos of ply 7) ISI marked confirming to IS-303 (includinng tightening of whole charpoy frame before fixing of ply wood) fixed with12 Nos round headed bolts with nut & washer of size 5x75mm in the holes drilled at equal distance on rails (03 Nos on each long rail, 02 Nos on each short rail & 01 No on the center of each FI strip). The edge of plywood shall be smoothened alround & corner shall be rounded to a radious of 1cm iron carriage completeas all as shown on drawings. and as directed.
185	Removing of old/unservicable long rail from charpoy GI Pipe and Supply and fixing ofof new long rail made out of GI Pipe 32mm dia medium grade duly threaded at both ends upto 45mm complete all as specified and directed. (Note : Unservicable long rails shall be converted into 01short rail & 02 leg measured under Sch item Short rail & Leg.
186	Removing of old/unservicable short rails from charpoy GI Pipe and fixing only short rail made out of long rail retrieved from schedule No. 01(b) duly threaded at both end upto 45mm complete all as specified and directed. Note: Unservicable short rails shall be converted into 01 leg and measured in Legs.
187	Removing of old/unservicable leg from charpoy GI Pipe and fixing only leg made out from old long rails/short rails, retrieved under item Long Rail & Short Rail here in before duly threaded at one end upto 45mm complete all as specified and directed.
188	Removing ofOld/unservicable broken existing elbow of charpoy GI pipe and Supply and fixing ofnew elbow GI 03 way 32mm medium grade ISI marked complete all as specified & directed
189	Removing ofOld/unservicable broken existing check nutof charpoy GI pipe and Supply and fixing ofnew elbow check nut 32mm medium grade ISI marked complete all as specified and directed
190	Replacement of existing unserviceable flat iron MS strip of size 900mm×32mm×3mm and fixing 02 Nos of new MS strip of size 900mm x 40mm x 5mm at equal distance of long rails of Charpoy GI Pipe, duly painted with 01 coat of red oxide & 02 coats of black synthetic enamel paint complete all as specified and directed. (02 Nos in each Charpoy)
191	Note :- Amount of credit of Rs. 172878.00 for retrieved materials is mentioned in Schedule of Credit Page No 35 to 41 of tender documents in pdf form which will be deducted offline while acceptance of tender.

Need a Bussiness Loan? Apply Now!
Buy Digital Signature
Bidding Support

Also Visit

Tenders

Uttarakhand Tenders

Furniture Tenders

Furniture Items Tenders

Steel Furniture Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Repair To Certain Steel Furniture Items/Painting Of Steel Furniture Items Under Ge Dehradun., Dehradun-Uttarakhand

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Repair To Certain Steel Furniture Items/Painting Of Steel Furniture Items Under Ge Dehradun., Dehradun-Uttarakhand

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us