|
| 1 | Hydraulic PumpP1M-045-D-00260 LPMMax Pressure- 210 BarMake- ParkerWith all necessary fitting and other required equipment’s.Fitting of pumps at site is also in the scope of bidder. |
| 2 | First Motion worm shaft for cane unloader LT Gear Box (Detail of gear box mentioned below):Detail of gear Box:JR150/6Ratio: 48:1RPM- 960HR 400, Make: Niles |
| 3 | Returnable Oil Fiter, Make-Parker Hydraulic Filter Division Metamora, ohio USA 43450, Part No.-92616910C,Numerode Pieza-K- 23018, Numer de piece-FA57-10 |
| 4 | AirLine Filter Hydrauline S/E 20-25 U for cane unloader |
| 5 | Suction Oil Filter SC-3-50 for Hydraulic |
| 6 | Cane Unloader Hydraulic Cylinder Repair Kit 50x80 |
| 7 | Rubber Hose Pipe forHydraulic Cylinder , Make PolyHose, Wp-259 Bar, 3750PSI) ID-3/4”, 9-12 |
| 8 | Hydraulic Cylinder for Cane Unloader Garb suitable for Uttam Make (Both side usable) |
| 9 | Strainer for cane unloader grab tank, code:SC3-050, Make: Hydroline |
| 10 | Solenoid valve (SOV) Model Code: DG4V5 8CJ.V.MU.H6.20Rated Pressure: PA&B:315 Bar(4568 PSI), T-120 Bar, Make: ETN Vickers |
| 11 | Hydex Coupling No-48, Make--Hydex |
| 12 | Hydex Coupling No-48 Sleeve, Make- Hydex |
| 13 | Cane Unloader LT Bridge Wheel |
| 14 | Cane Unloader CT Bridge Wheel |
| 15 | Cane Unloader LT Gear BoxRef No. JR150/2, Type: HR400, Rating: 48:1, Speed:960, Make: Niles Engineering |
| 16 | First Motion Worm Shaft for Cane Unloader LT Gear BoxRef No. JR150/2, Type: HR400, Rating: 48:1, Speed:960, Make: Niles Engineering |
| 17 | Cane Unloader CT Gear BoxRef No. JR150/8, Type: VC475, Rating: 42:1, Speed:960, Make: Niles Engineering |
| 18 | First Motion Worm Shaft for Cane Unloader CT Gear BoxRef No. JR150/8, Type: VC475, Rating: 42:1, Speed:960, Make: Niles Engineering |
| 19 | Cane Unloader Grab Gear BoxRef No.JR118/5, Type: HR500, Rating: 20.5:1, Speed:960, Make: Niles Engineering |
| 20 | First Motion Worm Shaft for Cane Unloader Grab Gear BoxRef No.JR118/5, Type: HR500, Rating: 20.5:1, Speed:960, Make: Niles Engineering |
| 21 | Steel Wire Rope, (6x36) Core, 3/4” dia, Thk-20mm, Make-Usha Martin |
| 22 | Break Linner, Width Size: 140mm x 12mmMake- HCL |
| 23 | Hydraulic Hose pipe suitable for 5800 PSI with hydraulic fittings |
| 24 | Wire Breaded Rubber Hose Pipe, Size: 4” x 14” |
| 25 | Wire Breaded Rubber Hose Pipe, Size: 8” x 14” |
| 26 | Rubber Hose Pipe Flexible 2 AT-AI-4 (DN6), HI-Impluse, Din En 853-2SN, Size-1/4” with Hex Nipple, Working Pressure-400 Bar, Length-1000mm |
| 27 | Double Steel wire braided flexible hose pipe ½” end connection, 2000mm long for ESP pneumatic conveying line |
