Tender For Sahatwar Chandpur To Babhnauli Hadiha Road - Providing, Laying, Spreading And Compacting Stone Aggregate Of Specific Size 22-4-53Mm To Water Bound Macadum Specification Including Spreading In Uniform Thickness Hand Packing Rolling With Smooth W, Ballia-Uttar Pradesh
TDR : 48860257
Tender Notice
BOQ
Expired
Ballia
Uttar Pradesh
Tender For Sahatwar Chandpur To Babhnauli Hadiha Road - Providing, Laying, Spreading And Compacting Stone Aggregate Of Specific Size 22-4-53Mm To Water Bound Macadum Specification Including Spreading In Uniform Thickness Hand Packing Rolling With Smooth W
Name of Work: lgrokj pkaniqj ls cHkukSyh gfM+gk ekxZ dk fo\"ks\"k ejEer dk dk;ZA
Sl. No.
Item Description
1
Providing, laying, spreading and compacting stone aggregate of specific size 22-4-53mm to water bound macadum specification including spreading in uniform thickness hand packing Rolling with smooth wheel roller 80-100 kn in stages to proper grade and camber applying and brooming stone screening to fill up the interstices of coarse aggregate watering and compating to the required density Grading 3 as per Technical Specification Clause 405 of MORD data book.Compacted thickness 7.50 cm.
2
Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70 kg/ sqm using mechanical means as per clause 502 of MORD data book.
3
Providing and applying tack coat with bitumen (V.G.10)using pressure distributor at the rate of 0.30kg per sqm on the prepared bituminous surface cleaned with machanical broom as per 503 of MORD data book
4
Providing and applying and rolling of open graded premix carpet of 20 mm thickness composed of 13.2mm to 5.6mm aggregates either using penitation grade bitumen or emulsion to require line grade and level to serve as vearing coarse on a previously prepared base including mixing in a suitable plant laying and rolling with a three wheel 80-100 kn static roller capacity finished to required level and grates to be followde by seal coat or either as per Technical Specification Clause 508
5
Seal CoatProviding and laying seal coat sealing the voids in a bitumenus surface laid to the specified levels grade and cross fall using type-C as per Technical Specification Clause 510
6
Construction of plain cement concrete pavement thickness 15 cm, over a prepared sub base with 43 grade cement or any other type as per clause 1501.2.2M 30 (Grade) coarse sand fine aggregatges conforming to IS.383. maximum size of coarse aggregate not exceeding 25mm. mixed in a concrete mixer of not less than 0.1 cum. capacity and appropriate weigh batcher using approved mxi design. laid in approved fixed side formwork & 125 micron thickness polythene film includinglevelling the formwork as per drawing, spreading the concrete with sholvels rakes compacted using meedle, screed and plate vibrator and finished in continuous operation including provision of contraction and expansion curing of concrete slabs for 14 days curing compoundand water finishing to lines and grade as per drawing and Technical specififcation clause 1501
7
Constn. OfSubgrade and earthen shoulder with approved materials obtained from borrow pits with a lift upto 1.50M. transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.1 & 300.2 with lead upto 1000m. As per Technical specification clause 301.5
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
