Supply Of Various Chemicals , Caustic Soda Lye 47-48% As Per Indian Standard 252-1991 Or As Per Latest Amendment If Any , Caustic Soda Lye 4.5% Delivery State : Liquid , Sulphuric Acid (98%) Specific Gravity=1.8 Specification As Per Indian Standard 266-1995 Or As Per Latest Amendment If Any , Hcl 30% Specification As Per Indian Standard 265-1976-1993 Or As Per Latest Amendment If Any , Hydrazine Hydrate 80%, Specification As Per Indian Standard 12086-1987 Or As Per Latest Amendment If Any , Poly Aluminium Chloride (High Basicity) Specification As Per Indian Standard 15573-2005 (Aliminium As Al2o3=10.2% By Mass) Or As Per Latest Amendment If Any , Hydrated Slacked Lime-85% Grade B Conforming To Is: 1540-1990 (Part-Ii) Pack Size 40 Kg Bag , Hydrated Lime Grade C Conforming To Is: 1540-1990 (Part-Ii) Specification: Technical Speciation:-1. Chemical Components A. Available Lime As Ca(Oh)2 :80-85%By Massb. Acid Insoluble(As Sio2) :1.0-.2.0% By Mass C. Moisture: 1.0-.2.0% By Mass D. Iron(As Fe2 O3) :0.20%¼ ( Max. By Mass)E. Alumina (As Al2 O3):0.10% (Max. By Mass) F. Magnesia (As Mgo) : 1.5%( Max.By Mass)G. Dead Burnt Lime (As Cao):3.5%( Max. By Mass) 2. Physical Properties A. Colorwhiteb.Particle Size : 200Meshc. Physical State: Free Flowing Fine Powderthe Material Shall Be Substantially Free From Ash, Mud, Core. The Material Shall Confirm To Is: 1540-1990 (Part- Ii) With Latest Amendment If Any. , Activated Carbon For Dm Plant Particulars:Granular Activated Carbon Appearance:Black Granules Total Surface Area:939.37 M3/Gm Particle Density Wetted In Water:1.34 Gm/Cc Mean Particle Diameter(Granular Type):1.2 To 1.4 Mm, Iodine Value:1040 Mg/Gmbulk Density=545 Kg/M3 Ash Content:5.19% Particle Size:4/16 Bss Mesh Abrasion Number:96.55% Moisture Content:3.77% Carbon Content:92.04% Uniformity Coefficient:1.56 , Morpholene Maxtreat 3333 Make Thermax Or Equivalent Chemicals , Sodium Hypo Chloride(Naocl) (10%) , Appearance: Yellow To Light Green Liquid.Odor: Bleach Like Odor. Solubility: Infinitely Soluble In Water.Specific Gravity: 1.15 – 1.16Boiling Point: 180 Of Decomposes Slightly Vapor Pressure: 17.5 @ 68 F,Evaporation Rate: < 1 (Butyl Acetate = 1) , Ph: 11 To 14 , Sodium Meta Bi Sulphite(60%)As Per Is 248/1987, Physical State- Powder Solid ,Appearance Off-White Odor- Pungent , Ph 4-6 5% Aq.Sol , Melting Point/Range- 150 °C / 302 °F ,Specific Gravity -1.4 Solubility -Soluble In Water , Decomposition Temperature -120 °C , Molecular Formula -Na2 O5 S2 Molecular Weight -190.1 , Polyelectrolyte(Cationic Poly Electrolyte (Powder Form) ;Packing In 20/25 Kgs Bags , Poly Electrolyte Zetag 4120/Jal Floc 1012(An)(25 Bag Each)Chemical Component : Polyacrylamide(Anionic) Product Type: Powder Physical Form: Off-White Granular Solid,Anionic Charge: Medium-Low Molecular Weight: Very High, Specific Gravity: 0.75 Bulk Density: 46.8 Lb/Ft3 Ph 1% Solution: 6-8Apparent Viscosity/(Cp) @ 25 °C Concentration 0.25%0.50% 1.0% Viscosity 600 1,450 2,000 , Alum(Non Ferric Alum Al2so4as Per Is 299 Of 2012 Grade-Iv, 15%-18% 20/25 Kg Slab, Loose Slab , Alum(Non Ferric Alum Al2o3 Min 17%As Per Is: 260/2001, Technical Grade , Alum(Non Ferric Alum Al2o3 Min 17%As Per Is: 299 Of 2012; Purity: 70-80%, Soln Ph: 2.8, Fe 1.40%, Insolubles: Max1.0%, 20/25Kgs Slab; Loose Slab , Ferric Chloride (43%) Physical State: Liquid Color: Amber Odor: None.Flammability (Solid, Gas): Nonflammable.Specific Gravity / Density: 1.4 G/Ml, Solubility: Soluble In Water.Viscosity, Kinematic: 6.8 Cst , A-Polymer Cont. 100%, Delivery State: Powder , Soda Ash (Na2co3) Cont. 100%, Delivery State: Powder , Anti-Foam Cont.100%,Delivery State :Liquid , Inhibitor Cont. 100%,Delivery State :Liquid , Koh Flakes
