|
| 1 | Head assembly with third plat including cover and cover bolts as per IS-14103/1994. |
| 2 | Hex Bolt M12 x 20 as per IS 1363 |
| 3 | Hex Bolt M12 x 40 as per IS 1363 |
| 4 | Hex Nut M12 |
| 5 | Washer (4mm thick) for M 12 bolts |
| 6 | Front cover |
| 7 | Third plate |
| 8 | Handle assembly without axle |
| 9 | Chain with coupling |
| 10 | Spacer for handle assembly |
| 11 | Water tank assembly |
| 12 | Stand assembly (normal) |
| 13 | Stand assembly (telescopic) |
| 14 | Socket (riser pipe holder) |
| 15 | Connecting rods 12mm dia 3m length (electro galvanizing) |
| 16 | Hex bolt M. 10 x 1.5 x 40 IS-1364 (part-I) |
| 17 | Cylinder body with brass liner (the brass liner shall confirm) |
| 18 | Reduced Cap |
| 19 | Handle axle washer - 4mm thick to suit M 12 as per IS 2016 |
| 20 | Cylinder Assembly (complete unit inclusive of stainless steel plunger rod 12mm dia with NITRILE rubber pump bucket) |
| 21 | Plunger Yoke body |
| 22 | Upper valve |
| 23 | Check valve |
| 24 | Check valve sheet |
| 25 | Spacer for cylinger assembly suitable for Nitrile rubber pump bucket |
| 26 | Follower |
| 27 | Rubber seat retainer |
| 28 | Pump bucket |
| 29 | Sealing ring |
| 30 | Rubber seating (upper valve) |
| 31 | Rubber seating (lower valve) |
| 32 | Prevailing Torque steel Hex lock Nut M10 x 1.5 (IS: 7002/1972) |
| 33 | Single side shielded bearing confirming to IS 6456/1972 SIL, HMT, NBC, MB, TAT, URB/SBL or any other make approved by UNICEF and acceptable to SGS (India) Ltd., |
| 34 | Upper valve Assembly with Nitrile rubber pump bucket (compraising of plunger yoke body, upper valve, rubber seating, spacer and follower) |
| 35 | Lower valve Assembly (confirming rubber seat retainer, rubber seating, check valve and check valve seat) |
| 36 | 12 Pipe Wrench |
| 37 | 18 Pipe Wrench |
| 38 | 24 Pipe Wrench |
| 39 | 12mm Hand Bottom Die set with 2 piece die |
| 40 | Double ended spanner M17 x M19 |
| 41 | Big Screw driver |
| 42 | Small screw driver |
| 43 | 300mm Hack saw frame |
| 44 | Hack saw blades |
| 45 | 250mm Triangular file with handle |
| 46 | 1Kg Hammer with handle |
| 47 | 3 pipe vice |
| 48 | Multi purpose Grease (5kg Tin) |
| 49 | 3mm Thick Nylon Rope (in the form of 100mts) |
| 50 | 32mm Tap sets with handles (BSW) |
| 51 | Lifters for lifting 32mm dia GI pipes |
| 52 | 12 Adjustable wrench |
| 53 | GI Extension Flangers 9 rise suitable for Telescopic stand |
| 54 | GI Extension Flangers 1 rise suitable for Telescopic stand |
| 55 | 1/2 x 6 chisels |
| 56 | 40mm x 12mm dia Hexagonal Rod Couplers |
| 57 | Manufacture, supply and delivery of special toolset for installation and maintance of IM-II hand pumps as per UNICEF specifications, excluding taxes |
| 58 | SS Rod 1.0 meter length |
| 59 | Manufacture, supply and delivery of ISI marked fully hot dip galvanized deep well india mark-II Hand pump assembly complete unit with 10 Nos of connecting rods (bright bars) of 12mm dia, 3mts length each confirming to IS: 9301/1990 with its ammendments / revisions up to date including BIS packing, loading and unloading and stacking charges and excluding all taxes and manufactures identification mark shall be as per BIS specifications with Telescopic stand assembly. (New IM-II Hand Pump set) |
| 60 | Manufacture and supply of GI pipes (Medium class) |
| 61 | Cylinder body with brass liner the brass IM-II liner shall confirm to grade Cu Zn 30. As of IS 404/1981. It shall be temper anneled |
| 62 | Handle Axle washer - 4mm thick to suit M12 IS: 2016 |
