|
| 1 | Dismantling artificial stone flooring upto 50 mm. thick by carefully chiselling without damaging the base and removing rubbish as directed within a lead of 75 m. |
| 2 | Dismantling all types of plain cement concrete works, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m. in ground floor. |
| 3 | Taking out Mirzapur or glazed porcelain tiles carefully by chiselling from walls including stacking serviceable material as directed. |
| 4 | Filling in foundation or plinth by fine sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. |
| 5 | Supplying and laying true to line and level vitrified tiles of approved brand (size not less than 600 mm X 600 mm X 10 mm thick) in floor, skirting etc. set in 20 mm sand cement mortar (1:4) and 2 mm thick cement slurry back side of tiles using cement @ 2.91Kg./sqMDeep Colour & White |
| 6 | Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc.WallWith Sand Cement Mortar (1:3) 15 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20 kg/Sq.m.Area of each tile above 0.09 Sq.mOther than Coloured decorative & white |
| 7 | Supplying and laying true to line and level Anti-Skid, Full Body, Homogeneous & Granular finish Vitrified Tiles conforming to IS:15622-2006 & IS 4457-2007 and testing shall be made in accordance with IS:13630 [Non- modular sizes for tiles with Skid resistance > 0.5, Mohr\"s hardness > 5.0, Staining resistance: Class-1, Water Absorption: E < 0.5%], MOR > 35 N/sq.mm in Internal area of building e.g. Toilet Block, Passage, Corridor, Accessible Open Terrace etc. set in 20 mm sand cement mortar (1:4) and 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg./Sqm or using Polymerised Adhesive (6 mm thick layer applied directly over finished artificial stone floor/ Mosaic etc without any backing course) laid after application slurry using 1.75 Kg of cement per Sqm below mortar only, joints grouted with admixture of white cement and colouring pigment to match with colour of tiles/ epoxy grout materials of approved make as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete including the cost of materials, labour and all other incidental charges complete true to the manufacturer\"s specification and direction of Engineer-in-Charge. (White cement, synthetic adhesive and grout material to be supplied by the contractor).FLOORSizes-600 mm x600mm x10 mm with breaking strength >1500 N |
| 8 | Stripping off worn out plaster and raking out joints of walls, celings etc. upto any height and in any floor including removing rubbish within a lead of 75m as directed. |
| 9 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed etc.With 1:4 cement mortar20 mm thick plaster |
| 10 | Rendering the surface of walls and ceiling with white cement based wall putty of approved make and brand(1.5mm thick) |
| 11 | Applying Interior grade Acrylic Primer of approved quality and brand on plastered or cencrete surface old or new surface to receive Distemper/ Acrylic emulsion paint etc. (In all Floor) (a) One Coati) Water based interior grade Acrylic Primer |
| 12 | Acrylic Distemper to interior wall, ceiling without acrylic primer (as per manufacturer\"s specification) including cleaning and smoothning of surface.Two Coats |
| 13 | Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. |
| 14 | Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. |
| 15 | Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. On timber or plastered surfaceTwo coats (with any shade except white)With super gloss (hi-gloss) |
| 16 | Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. On steel or other surfaceTwo coats (with any shade except white)With super gloss (hi-gloss) |
| 17 | Supplying, fitting and fixing Chromium plated shower arm 240 mm long. |
| 18 | Supplying, fitting and fixing Chromium plated round shower with revolving joint of approved brand and make. |
| 19 | Compact Ball Valve with SS Handle For CPVC/ UPVC Fittings.20 mm dia |
| 20 | Supplying, fitting and fixing Hand Shower(Health Faucet) with 1mtr Fexible Tube with Wall Hook (ESSCO make or equivalent) |
| 21 | Supplying, fitting and fixing CP 2-way bib Cock(ESSCO make or equivalent) |
| 22 | Supplying, fitting and fixing Chromium plated Bib Cock short body.(ESSCO make or equivalent) |
| 23 | Supplying, fitting and fixing C.P. pillar cock 15 mm. (ESSCO make or equivalent) |
| 24 | Supplying,fitting and fixing Chromium plated angular Stop Cock with wall flange. (ESSCO make or equivalent) |
| 25 | Supplying, fitting & fixing CP Wall Mixture without spout but with provision for connnection to Telephone Shower and exposed pipe for Overhead shower.(ESSCO make or equivalent) |
| 26 | Supplying, fitting and fixing CPVC (Chlorinated Polyvinyl Chloride) pipes of approved make conforming to IS-15778: 2007 . with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials.15 mm dia |
| 27 | Supplying, fitting and fixing CPVC (Chlorinated Polyvinyl Chloride) pipes of approved make conforming to IS-15778: 2007 . with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials.20 mm dia |
| 28 | Supplying, fitting and fixing 10 litre P.V.C. low-down cistern conforming to I.S. specification with P.V.C. fittings complete,C.I. brackets including two coats of painting to bracket etc. |
| 29 | CP Flush Bend (local) best quality for E. W.C. |
| 30 | Supplying, fitting and fixing Wash basin vitreous china of approved make; 550 mm X 400 mm size |
| 31 | Supplying, fitting and fixing pedestal of approved make for wash basin(white) |
| 32 | Supplying, fitting and fixing Waste fittings complete.(a) C.P. over brass32 mm |
| 33 | Supplying, fitting and fixing C.I. bracket including two coats of painting. |
| 34 | Supplying, fitting and fixing C.P. Extension Pipe |
| 35 | Supplying,fitting and fixing approved brand P.V.C. CONNECTOR white flexible, with both ends coupling with heavy brass C.P. nut, 15 mm dia.; 900 mm long |
| 36 | Supplying,fitting and fixing approved brand 32 mm dia. P.V.C. waste pipe, with PVC coupling at one end fitted with necessary clamps. 1050 mm long |
| 37 | Supplying, fitting and fixing E.W.C. in white glazed vitreous chinaware of approved make complete in position with necessary bolts, nuts etc.With S trap |
| 38 | Supplying, fitting and fixing Closet seat of approved make with lid and C.P. hinges, rubber buffer and brass screws complete.Plastic (solid type) white |
| 39 | Supplying,fitting and fixing 32 mm dia. C. P. Flush Pipe of approved make with necessary fixing materials and clamps complete. |
| 40 | Supplying, fitting and fixing best quality Indian make mirror 5.5 mm thick with silvering as per I.S.I. specifications supported on fibre glass frame of any colour, frame size600 mm X 450 mm |
| 41 | Supplying, fitting and fixing glass shelf with aluminium guard rails.; Ordinary type with 5.5 mm sheet glass600 mm X 125 mm |
| 42 | Supplying, fitting and fixing soap holder |
| 43 | Supplying, fitting and fixing towel rail with two brackets.C.P. over brass25 mm dia. and 750 mm long |
| 44 | Providing and fixing PVC Door Frame of size 50x47mm with a wall thickness of 5mmetc, |
| 45 | Supplying fitting and fixing P.V.C. door shutter of approved quality & shade; 30 mm thick |
| 46 | Supplying, fitting & fixingCP Grating 125 mm dia |
