Tender For Providing And Fixing Of Facade Lighting Arrangement In Sector-37 Underpass, Noida - SITC of Outdoor Architectural 600mm LED Non Integral Linear Wallwash luminaire with System wattage not more than 20W, System efficacy ≥45LPW, CCT RGBW (W=3000K) with 4in1 LED chip for uniform illumination ensuring every LED in Luminaire reproducing same color at all time, System lumen output should not be less than 900lm(±10%) with all RGBW channels ON, Fixture should be compatible with DMX512 and able to reproduce 16Million Colors with 256Step Dimming, Fixture should be compatible with Non-Integral 24V DC CV Driver Placed in IP Rated Box , Single piece Housing made of Extruded Aluminium with Aluminium End caps ensuring optimum thermal management, Heat Resistant Clear tempered Glass with Secondary PMMA lens with Available Precise Beam angles 10°X30° . Ingress Protection ≥ IP66 with Impact Resistance ≥ IK05. Remote type Driver should be high efficiency isolated constant voltage driver with Protection Class 1. Fixture should have inbuilt 4 channel decoder. Total Surge protection of 6KV Internal & 20KV or More Additional SPD, No-load protection, Over voltage protection, & Short circuit protection, Life 60,000 B Hrs@L70, CRI>80 (for While LED), THD<10% , PF>0.95, Voltage Range 140-270V AC, Operating Temp 0 to +50°C, Operating Humidity 10-90%, Fixture weight should not be more than 3KG (±5%) to avoid excessive load on facade structure. Fixture should come with min. 0.5Mtr. long loop in loop out cable with ≥IP66 connector, Light Engine PCB should be Metal Core PCB made of high grade Al 5052 with ≥70 micron copper thickness & 2 W/mk thermal conductivity for better life & thermal maintenance for light Engines. 2 Manufacturer emblem/logo embossed into the Aluminium housing/End Caps to allow OEM identification & traceability till the life of the fixture. Suitable for mounting on surface using inbuilt mounting brackets with >180° tilt adjustment at site . Contractor should make necessary provisions for proper installation of luminaires at site with exceptional workmanship considering all safety standards. Luminaire Dimensions for ref. L=1200mm, W=60mm(±5%), H=60mm(±5%) .Manufacturer should have BIS with R No. , LM79 from NABL Accredited Lab, TTC from NABL Accredited Lab, LM80, Photometric & illumination Code Diagram, Technical Data sheet soft copy for submission if requested by Engineer in-charge. Fixture should have Silver Grey/Black (As per selection by Engineer In-charge) Nano technology powder coating , Luminaire should comply with Performance & safety standards IEC 60598/ IEC60950 , IEC 60529, IS 10322-5, IS 161-03/05/06/07, Surge : IEC 61000-4-5, EMC : EN 55015( Make: NERI/Jaiquar/ Color Kinetics/LT/ Unilamp/Traxon/ Thorn ) make 3 SITC of Outdoor Architectural 1200mm LED Non Integral Linear Wallwash luminaire with System wattage not more than 30W, System efficacy ≥45LPW, CCT RGBW (W=3000K) with 4in1 LED chip for uniform illumination ensuring every LED in Luminaire reproducing same color at all time, System lumen output should not be less than 1800lm(±10%) with all RGBW channels ON, Fixture should be compatible with DMX512 and able to reproduce 16Million Colors with 256Step Dimming, Fixture should be compatible with Non-Integral 24V DC CV Driver Placed in IP Rated Box , Single piece Housing made of Extruded Aluminium with Aluminium End caps ensuring optimum thermal management, 4 Heat Resistant Clear tempered Glass with Secondary PMMA lens with Available Precise Beam angles 10°X30° . Ingress Protection ≥ IP66 with Impact Resistance ≥ IK05. Remote type Driver should be high efficiency isolated constant voltage driver with Protection Class 1. Fixture should have inbuilt 4 channel decoder. Total Surge protection of 6KV Internal & 20KV or More Additional SPD, No-load protection, Over voltage protection, & Short circuit protection, Life 60,000 B Hrs@L70, CRI>80 (for While LED), THD<10% , PF>0.95, Voltage Range 140-270V AC, Operating Temp 0 to +50°C, Operating Humidity 10-90%, Fixture weight should not be more than 3KG (±5%) to avoid excessive load on facade structure. Fixture should come with min. 0.5Mtr. long loop in loop out cable with ≥IP66 connector, Light Engine PCB should be Metal Core PCB made of high grade Al 5052 with ≥70 micron copper thickness & 2 W/mk thermal conductivity for better life & thermal maintenance for light 5 Engines. Manufacturer emblem/logo embossed into the Aluminium housing/End Caps to allow OEM identification & traceability till the life of the fixture. Suitable for mounting on surface using inbuilt mounting brackets with >180° tilt adjustment at site . Contractor should make necessary provisions for proper installation of luminaires at site with exceptional workmanship considering all safety standards. Luminaire Dimensions for ref. L=1200mm, W=60mm(±5%), H=60mm(±5%) .Manufacturer should have BIS with R No. , LM79 from NABL Accredited Lab, TTC from NABL Accredited Lab, LM80, Photometric & illumination Code Diagram, Technical Data sheet soft copy for submission if requested by Engineer in-charge. Fixture should have Silver Grey/Black (As per selection by Engineer In-charge) Nano technology powder coating , Luminaire should comply with Performance & safety standards IEC 60598/ IEC60950 , IEC 60529, IS 10322-5, IS 161-03/05/06/07, Surge : IEC 61000-4-5, EMC : EN 55015 ( Make: NERI/Jaiquar/ Color Kinetics/LT/ Unilamp/Traxon/ Thorn ) make 6 Supply, Installation, Testing and Commissioning of LED RGBW floodlighting luminaire for facade lighting with Die-cast aluminium housing,powder coated finish,of Maximum 50W wattage.Luminaire shall be capable of producing dynamic color changing light for with16 million colors by DMX/Ethernet based control.The beam angle of the fitting shall be narrow,medium,wide or asymmetric as per the requirement.Luminaire shall be complete with driver and capable of operating at line voltage without any separate power supply from 100-270VAC, 50Hz with powerfactor>0.9.Fixture shall be suitable to operate at an ambient temperature range of-10°C to +50°C and shall be IP66 and IK08 rated.Lifetime shall be at least L70:50000 burning hours at50°C.Luminaire shall be conforming to BIS(IS10322)and shall be complete with all necessary accessories required for proper working of fixture including weatherproof connection cables ,waterproof connectors etc. as required.( Make: NERI/Jaiquar /Color Kinetics/LT/ Unilamp/Traxon/ Thorn ) make 7 The luminaire shall have electrostatically applied Weather proof Gray Color polyester powder coating with moderate matt finish. The luminaire bracket/Cradle shall be made of cold-rolled steel/Aluminium & shall be so designed that the luminaire can be tilted to ±90°. The bracket shall have self-locking mechanism to fix & secure the desired tilt angle. The luminaire shall have silicon gasket between optical cover & LED chamber to ensure proper ≥IP66 protection. The nominal weight of the luminaire shall be not be more than 3.5KG (±10%). The luminaire shall be equipped with high-power LEDs of Cree, Nichia, osram, lumiled or equivalent Make. The fixture shall have Narrow Beam Angle & the lens shall be made of anti-aging & UV stabilized PMMA material. The optical cover shall be made of IK08 rated clear tempered glass with ~3mm thickness. Luminaire should have high impact resistance of ≥IK08. The Luminaire should have CRI ≥80 & SDCM≤4 for White LEDs. The fixture shall come with power & DMX Loop in loop out gland. The fixtures shall be installed with have IP67 connectors. 8 The Luminaire should be compatible with 2 Universe DMX512 with Inbuilt Decoder. The Luminous output of luminaire shall not be less than 2250Lm@all channels ON withMaximum Wattage 55W. Luminaire Efficacy should not be less than 45LPW. Fixture should havestorage ambient temperature range -10°C to 50°C. Fixture should have rated input voltage 220-240 VAC, 50Hz . T THD<10% . The luminaire shall have class I insulation.The luminaire shall be capable of 8-bit control of RED, Green, Blue & Neutral White (4000K) CCTs .. The Luminaire shall have Short Circuit Protection, Over voltage protection, No load Protection, Internal Surge Protection of min. 6KV and additional surge protection device of 20KV/10KA. Luminaire should be supplied with Inbuilt Cradle Bracket with min. 3 mounting holes for stronger and sturdy wall mounting. Logo of OEM/Manufacturer should be embossed on the PDC Aluminium alloy housing. The successful bidder shall submit the following certifications/reports for approval before supply of materials: product data sheets, LM79 report(from NABL accredited lab),Photometric Data, illuminance diagram, polar curve & LM80 report issued by LED chip manufacturer & RoHS Compliance along with CE certificate. The luminaire shall be supplied with necessary Std. connectors. Necessary connecting lead/jump cables as per lighting layout/Site requirements will be in Installation contractor Scope. Luminaire font aperture dia should not be approx. 200mm(±10%) With height 261mm(±10%). Luminaire should becomplying to Performance & safety standards IEC 60598/ IEC60950 , IEC60529, IS 10322-5, IS 161-03/05/06/07, Surge : IEC 61000-4-5, EMC : EN 55015 (as per DSR/AOR Facade Lighting) copy enclosed at C-------)( Make: NERI/Jaiquar/ Color Kinetics/LT/ Unilamp/Traxon/ Thorn ) make 9 SITC of Outdoor LED System wattage not more than 80W, System efficacy>100LPW (±5%), CCT=3000Kfor uniform illumination ensuring every LED in Luminaire reproducing same color at all time. Fixture should have Integral Driver Fixture should be compatible for DMX512 .Housing should be extruded Aluminium alloy ensuring optimum thermal management , Fixture should be available in diffused optics wi (As per approved concept & Site requirement). Secondary Lens should be of PMMA material & covered with Heat Resistance Toughened Glass / PC cover, Ingress Protection should not be less than IP66, Impact Resistance should be IK08 or more. Total Inbuilt and Additional Surge protection of more than or equal to 6KV Internal + 20KV Additional SPD along with other necessary protections No Load protection, Over voltage protection, Short circuit protection. LED Life should be 50,000 B Hrs@L70 B10, , PF>0.95, Operating voltage range 140-270V AC, Operating ambient Temp 0 to +50°C, Operating Humidity 10-90% Powder coating should be corrosion resistant Nano technology powder coating in Silver grey colour. Standard Power cable should have IP67 connector. Technical Data Sheet, Type test Certificate from In-House NABL accredited Lab should be submitted on request. Manufacturer/OEM emblem/logo should be embossed into the Aluminium housing to allow identification of OEM & traceability till the life of the fixture. Manufacturer/OEM should have complete manufacturing set up in India with In-house capability of Housing, PCB & Driver Manufacturing and In-House NABL Accredited LAB for Electrical & photometry testing. Luminaire should comply with Performance & safety standards IEC 60598/ IEC60950 , IEC 60529, IS 10322-5, IS 161-03/05/06/07, Surge : IEC 61000-4-5, EMC : EN 55015( Make: NERI/Jaiquar/ Color Kinetics/LT/ Unilamp/Traxon/ Thorn ) make 10 Supply, installation, testing & commissioining of Universe (1024 Channels) DMX controller with following features & specifications: This is built on the latest generation of lighting controllers and combines all recent innovations. Designed for DIN rail mounting, this is the perfect solution for midrange lighting installations. Delivered with 1024 DMX channels.The lighting levels, color and effects can be programmed from a PC, Mac, Android, iPad or iPhone using software from our website.Its Key Features includes • DMX Stand Alone controller • Up to 2 x DMX512 universes (1024 channels) • RDM compatible • USB & Ethernet connectivity for programming/ control • Stand Alone mode with 99 scenes • Play scenes in 5 areas / zones • microSD slot • 8+3 dry contact trigger ports • Test scenes rotary switch • Windows/Mac software to set dynamic colors/effects • iPhone/iPad/Android remote and programming apps • cloud compatibility.Technical Data Input Power 12v DC (8-15V range), Output Protocol DMX512 , Programmability PC, Mac, Android, iOS, Connections-USB-C Ethernet Screw terminals for DMX / RDM Universes, 8+3 Contact ports, 12v power-in Battery holder (CR2032), microSD slot Memory SD Card ,Environment IP20 / to 0 to +50°C, Buttons Rotary switch ,OS Requirements Mac OS X 10.8-10.14 Windows 7/8/10 Standards CE, ETL, Low voltage, EMC, and RoHS compliance with 5 year waranty complete in all respect as per direction of E/I. 11 Programming & Commisioning Charges of above all Lights with different Scenes complete in all respect as per approved by Noida officials 12 Supply, installation, testing & commissioining of 3port DMX Splitter(Din rail Mountable)with following features & specifications:DMX signal splitter enables branching in complex DMX installations. The combination of a large number of receivers in series can be troublesome, therefore it was possible to create branching DMX tracks using a splitter.With Splitter, it possible to split the DMX input signal into 6 independent branches. The individual outputs are galvanically isolated from input and between each other. The output signals are appropriately reinforces, which guarantees correct operation of the entire installation. DMX Splitter is manufactured in a housing adapted for mounting on standard DIN 35mm rails. Specification - Power Supply-DC12- 24V,DMX Channels--512,Nos. of DMX Inout-1 & output-6,Optical Isolation of DMX Lines,Built-in Terminatior,breakdown voltage of the isolation>1000V,current consumption-<500mA with 5 year waranty complete in all respect as per direction of E/I. 13 ply, installation, testing & commissioining of 2 port DMX Splitter(Din rail Mountable)with following features & specifications:DMX signal splitter enables branching in complex DMX installations. The combination of a large number of receivers in series can be troublesome, therefore it was possible to create branching DMX tracks using a splitter.With Splitter, it possible to split the DMX input signal into 6 independent branches. The individual outputs are galvanically isolated from input and between each other. The output signals are appropriately reinforces, which guarantees correct operation of the entire installation. DMX Splitter is manufactured in a housing adapted for mounting on standard DIN 35mm rails. Specification - Power Supply-DC12- 24V,DMX Channels--512,Nos. of DMX Inout-1 & output-2,Optical Isolation of DMX Lines,Built-in Terminatior,breakdown voltage of the isolation>1000V,current consumption-<500mA with 5 year waranty complete in all respect as per direction E/I. 14 Supply , Installation , Testing & Commissioning of 4 core .5 sq mm DMX Cable Wiring for circuit/ submain wiring alongwithearth wire with the following sizes of FRLS PVC insulated copper conductor, single corecable in surface/ recessed medium classPVC conduit as required 15 Supply , Installation , Testing & Commissioning of 3 core 2.5 sq mm Wire Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required 16 Operation and Maintenance of above all lights, controller, splitters and other all equipments installed by working agencies including replacing of defective lights and other parts, changing of design and defect Libeality period with theft liabelity also complete for 2nd year. 17 Operation and Maintenance of above all lights, controller, splitters and other all equipments installed by working agencies including replacing of defective lights and other parts, changing of design and defect Libeality period with theft liabelity also complete for 3rd year. 18 Supply and laying of 40 mm dia heavy duty (2mm thick) PVC conduit complete with bends and other acessories as required and 14 SWG fish steel wire etc. in slab alongwith reinforcement, before concreting and plastering etc. complete in all respects.P.S No. 284(A). 19 Supply and laying of 25 mm dia heavy duty (2mm thick) PVC conduit complete with bends and other acessories as required and 14 SWG fish steel wire etc. in slab alongwith reinforcement, before concreting and plastering etc. complete in all respects.P.S No. 282(A). 20 Supplying and laying of aluminium conductor PVC insulated armoured, served, sheathed cable 1100 Volts grade at a depth of 750 mm. below ground level over a cushion of 75 mm. thick sand alround and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. Clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respects. the armouring of the cable shall be properly connected with the earth conductor by clamps etc.(Grandlay, Skytone,Gloster, Plaza, KEI, Havells make) 21 (1) 4 Sq.mm. x 4 Core(PS No. 501) 22 (2) 6 Sq.mm. 4 Core(PS No. 501) 23 (3) 25 Sq.mm. 3.5 Core(PS No. 501) 24 (4) 50 Sq.mm. 3.5 Core(PS No. 501) 25 Supply and fixing of plain or pin type copper tin plated cable socket ( lug ) to the cable leads, insulating with tape and makingonnection etc. complete in all respect as perdirection of the Engineer-Incharge. PS No. 504 26 1- 4 sq. mm 27 2- 6 sq. mm 28 3- 16 sq. mm 29 4- 25 Sq.mm. 30 5-50 Sq.mm. 31 S/Laying of90 mm dia (OD 90 mm & ID 76 mm nominal) size of (DWC) HDPE Pipes ISI marked along wigh all accessories like socket, bend, couplers etc. conforming to IS 14930, Part-II complete with filling and cutting, jointing etc. direct in ground ( 75 cm below ground level) including excavation and refilling the trench pat excluding sand cushioning and protective covering etc. Complete in all respects. Rex/Duraline/Time/CPE make. as per DSR 2016 item no. 14.16.2 page no. 49 32 Supply and fixing of 40 Amp TPNcapacity of automatic street light cubical control panel painted with anti corrosive alkali and acid proof paint crossing of time switch TSO 100 series with contractors, HRC fuse, isolating swtich metering instrument & instrument box with CTs etc. in case of TPN, Complete in all respects. as per PS No. 807f 33 Supply and buring of safe earthing electrode T-19 (Hot dip galvanized), length up to 2000mm outer type 50mm, inner pipe, 22mm terminal dia 12mm, outer GI pipe of 16 SWG and inner GI pipe of 12 SWG with Hot Dip galvanization up to 100 micron filled with crystalline conductive mixture(CCM) having anti corrosive & conductive property with 50 Kgs activated soil (BFC) capable of reducing the soil resistivity with good micture of retaining capicity along with 30cm square C.I. frame with hinged cover & masonry husing (from electrode terminal to switch board, cost of 25x3 G.I. strip will be extra as per PS No. 725A 34 S/F of 25x3 mm. G.I. Strip from earth electrode directly in the ground as required complete in all respects as per direction of E/I as P.S. No. 716
