|
| 1 | PART (A) |
| 2 | Supply and Installation of Decorative steel pole is made out of mild steel galvanized two profile bottom profile 1000mm x125mmx4.00 mm and upper ribbed profile 2500mmx81mmx3.5mm with cast iron embelishment E8 . the pole has a service window atbottom section with heavy duty four way connector and a MCB mild steel base plate 300x210 mm with four nos mounting holes is fixed with welded with bottom section pole is primer coated and polyurethane painted.Decorative pole shall be installed at desired location including foundation of the pole by making cement concrete foundation of 1:2:3( 1 cement: 3 course sand : 6 graded stone aggregate 40mm nominal size) with the help of anchor bolts and 38mm G.I sleeve as required. make: phillips, bajaj, twinkle & equivalent reputated make as per direction of E/ic (PSR Begam Hazrat Mahal Park) |
| 3 | S/F of ornamental type luminaire 40-45 watt LED post top fitting make of aluminium 534 mm long housing duly powder coated/PU painted with PC/PMMA clear/frosted diffuser with sturdy triple arm MCPCB having high umen LED\"s are mounted on aluminium heat sinks. make: phillips, bajaj, twinkle & equivalent reputated make as per direction of E/ic(PSR Begam Hazrat Mahal Park) |
| 4 | Supply & fixing of 9 mtr GI Octagonal Pole of approved make (top dia 70mm, Bottom dia 155 mm and base plate 12mm thik) having 3mm thikness with single arm bracket (1 Mtr length) on RCC foundationincluding the cost of foundation, foundation bolts, excavation & back filling and Required T&P completee in all respect.pwd 2018/645 |
| 5 | Supply and fixing offactory wired integral LED flood light luminaires with die cast aluminium housing built with dirver set suitable for 170 to 200 Watt. Confirming to IP 66 protection complete in all respect.pwd 2018/1455 |
| 6 | Supply and fixing of M/S bracket (circular/sqaure shape)for fixing of four number LED flood light on top of pole complete of work with labour T&P etc as E/I (PSR) |
| 7 | Supplyandlayingof aluminiumconductorPVCinsulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. (SI No 501/2018) |
| 8 | 10 sq. mm 4 core |
| 9 | 16 sq. mm 4 core |
| 10 | 50 sqmm 3.5 core |
| 11 | Supply and fixing of plain or pin type copper tin plated cable socket ( Lug ) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the Engineer-Incharge. SOR S.I. No. 504/2018 |
| 12 | 10 sqmm |
| 13 | 25 sqmm |
| 14 | 50 sqmm |
| 15 | Supply and Wiring of submains with two nos. of 2.5 sq. mm.FRLSH PVCinsulated 1100 V grade single core multistrand copper conductor cable in existing conduit complete with supply of allmaterial labour and T&P required for proper completion of the work as directed at site by Engineer in charge.(PWD,SOR-289/2018) |
| 16 | Supply and erection of factory fabricated and wired metal clad dust and vermin proof floor mounting panel TPN switch board complete with the following HRC type heavy duty TPN fuse switches with fuses and instrument chamber etc. complete in all respects. The instrument chamber shall be separate and shall comprise of flush type ammeter, voltmerer, selector switches for ammeter and voltmeter, instrument fuses, current transormer etc. The board shall have suitable capacity electroytic alumininum busbars as per IS8623 istulate with heat shrink sleeving and mountendon non hygroscopic supports such as CMC/DMC support with deteachable side covers and shall be suitable for extension on the sides. The switches shall be complete with suitable cable end boxes, reverse entery boxes in case of pedestaal type, cable sockets, compression glands and indicating lamp on incoming etc.The job includes the grounting of the board as per direction of Engineer-in-Charge. All coutgoing switches of 100 Amp. and above will be provided with ampere metre current transformers and selector switches and instrument fuses etc. The switches board shall be fabricated with CRCA sheet with a minimum thickness of 1.6 mm/2 mm. Cubicle type switch board shall be of cat A B & B-II and pedestal type for Cat-B and C only.pwd 2018/801 |
| 17 | Incoming 315 Amp.TPN-1Nos, Outgoing 100 Amp.TPN-2Nos. & 63 Amp.TPN-2Nos. Cat. B. Cubicle Type |
| 18 | Incoming 100 Amp. TPN-1 No Outgoing 63 Amp. TNP-2 Nos.Cat. B. Cubicle Type |
| 19 | Suplly and Fixing of DWC HDPE Pipe along with all acessories Like socket, band, coupling etc. confirmin to IS 14903 Part-ii complete with fixing and cutting jointing etc. (63 mm OD and ID 51 mm nominal) DSR/2022/(E/M) Item No-14.16.1) |
| 20 | Deduct in item no. 501 (I) 501 (t) and 506 (a) to (f) when cables is passed through G.I./M.S. or Hume pipe in road crossing or along the wall. The cost of the G.I. pipe, hume pipe is to be extra when and where required. |
| 21 | Supply and burring of Safe Earthing Electrode T-19, (Hot Dip Galvanized), Length up to 3000mm, outer Dia 50 mm inner Dia 25 mm, terminal Dia 12mm, outer GI pipe of 16 swg and inner GI pipe of 12 swg with Hot Dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity and one earthing lead of 25mm x 3mm G.I. strip, upto switch board (from apron to switch board, the cost of G.I. strip will be extra) along with 30 cm square C.I. frame with hinged cover & masonry housing.Make: As approved in U.P. P.W.D., & C.P.R.I. Certified. (PWD SI No 725 B) |
| 22 | S/B of Earth rod 20 mm dia 2.5 mt long including GI wire 7/16 SWG to connected earth rod and earth clamp on pole, 3 mtr long steel conduit to carry earth wire along the jpole complite as per approved of E/Ic. (PSR) |
| 23 | Supply and fixing 40 A SPN capacity of automatic street light cubicle control panel painted with anti corrosive alkali and acid proof paint consisting of time switch TSO 100 series with contactors, HRC fuses, isolating switch metering instrument & instrument box with CTs etc. in case of TPN, complete in all respect. (PWD SI No 807 C ii) |
| 24 | Supply of feeder pillar box, with aluminium busbar 4 strip enclosure CRC & street powder coated outdoor type aluminium busbar 20x5 : 4 strip, MCB DP, 32 Amp-4No, 3 pin socket 32 Amp-1 No eclosure size 300x350x200 mm (PSR) |
| 25 | S/F of 20 watt E27 CDL ball lamp (PSR) |
| 26 | Supply and fixing ofLED Tube Light with batten suitable for up to 1 X 22 watt LED tube light fittingincluding tube on Surface complete in all respect.pwd 2018/1413 |
| 27 | Supply and fixing of 1200 mm ceilling fan complete in all respect as per direction by E/I (PSR) |
| 28 | PART (B) |
| 29 | AMC |
| 30 | 1st Year is Defective Liability Period. |
| 31 | Operation and Maintanance of Part-A 2nd Year (2.5 % on Part-A) |
| 32 | Operation and Maintanance of Part-A 3rd Year (3 % on Part-A) |
