Tender For Cleaning And Repair Work Of Well Located Near Kakarhawa Ghat Under Adampur Zone Ward No. 68 - Dewatering Work From Well By Diesel Or Electric Pump Including Hire Of Pump, Fuel, Generator, Operater Etc With All Complete. 3 Cleaning Of Silt/Ma , varanasi-Uttar Pradesh

Tender For Cleaning And Repair Work Of Well Located Near Kakarhawa Ghat Under Adampur Zone Ward No. 68 - dewatering work from well by diesel or electric pump including hire of pump, fuel, generator, operater etc with all complete. 3 Cleaning of silt/ma Iba from well with thehelp of rope, bucket & lavour etc. with all complete. 4 Providing & spreading of dury lime intothe well with all complete. 5 Disposal of silt/ ma Iba from site upto 8 km with all complete. 6 Earth work in cuttingand cartage up to 8 km. with all complete.(SOR -SI No.CARTAGE 231a +253 E/W) 7 Cement concrete with 2cm gauge approved stone ballast and c-sand 1:2:4 with20mm stone. Etc all complete. 8 M-150 class brick work in 1:4 cement & f- sand etc all cpmlete.(Rate Tendar-l.N.1.10) 9 12mm thick plaster with crmrnt & f-sand approved etc all complete.(Rate Tendar-l.N.1.32) 10 Wall painting with plastic emulsion paint of secent qullty approved brand andquality etc all complete. 11 M.S. or iron work in heavy size sach astruss, butt up gate etc all complete.( Rate Tendar-1.N.1.) 12 R.C.C work with cement approved coarse sand and 2cm gauge approved astone ballast in the proportion of 1:1.5:3 in lintels of dooas and windows, excluding its fixing and binding the same with 24b W.G.G.I binding wire. Etc all comlete.(SOR.2020.SI.No.284b 13 Mild steel or iron work of small size such and section. Etc all complete work.(SOR. 502) 14 Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.1.00 mm thick with zinc coating not less than 275 gm/m² .DSR 2023- 12.1.2 (1257.55X0.735=923.89)

INR 355 /-

INR 30085.0 /-

INR 3.55 Lakhs /-

FileName	File Description	File Size
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB