Tender For Hiring Charges For Supply Of Machineries,Vehicle,Equipment And Manpower For Dredging/Cleaning Of All The Natural Drain/Nala Water Way, Culverts, Cross Drain And Rcc Gutter At Dunetha Panchayat,Nani Daman.(2025), daman-Daman And Diu

Hiring Charges For Supply Of Machineries,Vehicle,Equipment And Manpower For Dredging/Cleaning Of All The Natural Drain/Nala Water Way, Culverts, Cross Drain And Rcc Gutter At Dunetha Panchayat,Nani Daman.(2025)-Providing & Supplying hydraulic hitachi on hire charges inclusing cost of fuel, manpower, loading and unloading of Hitachi in Natural Drain by Cranewith all safety safety measures etc. complete for cleaning/dredging work ofnatural drain/nala water way including removing of deposited and silting garbage, building rubbish, Industrial plastic bagswaste, stone, sludge, in Daman District as directed by Engineer in charge. The duration shall be considered from the time at which hitachi is deployed at the site upto the time at which hitachi leaves the site. 3 Providing & Supplying JCB on hire charges including cost of fuel, driver, operator , manpower etc. complete for cleaning/dredging work ofnatural drain/nala water way including removing of deposited and silting garbage, building rubbish, Industrial plastic bagswaste, stone, sludge, etc as directed by Engineer in charge. The duration shall be considered from the time at which JCB is deployed at the site upto the time at which JCB leaves the site. 4 Providing & Supplying tractor with trolley on hire charges including cost of fuel, driver, operator , manpower etc complete as and when require including all lift , lead and during the dredging / cleaning works of natural drain/ nala water wayas directed by Engineer in charge. 5 Supplying of Unskilled laboursfor cleaning of natural drain/nala water way i.e. removing of deposited and silting garbage, building rubbish, Industrial plastic bagswaste, stone, sludge, deposited at bed level including provision of all safety measures complete including all the equipments required for jungle clearing and nalla cleaning etc as and when required by the department anddirected by Engineer in - charge. 6 Providingformwork of ordinary timber planking so as to give a rough finish including centering shuttering strutting and propping etc. Height of propping and centering below supporting floor to ceilingnotexceeding 4 M. and removal of the same for in situ reinforced concrete and plain concrete work in. (B) Flat surfaces such as soffits of supspened floors slabs Landings and the like. (1)Floors etc. upto 200 mm in thickness.(upto 10 top) 7 Providing formwork of ordinary timber planking so as to give arough finish including centering shuttering strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4 M. and removal of the same for in situ reinforced concrete and plain concrete work in. (C) Vertical surface such as walls (any thickness) partitions and the like including attached buttresses & string course & the like. 8 Providing formwork of ordinary timber planking so as to give arough finish including centering shuttering strutting and propping etc. Height of propping and centering below supporting floor to ceiling not exceeding 4 M. and removal of the same for in situ reinforced concrete and plain concrete work in. (B) Flat surfaces such as soffits of supspened floors slabs Landings and the like. (1) Floors etc. upto 200 mm in thickness. 9 Providing and laying controlled cement concrete M.200 and curing complete excluding the cost of formwork and reinforcement for reinforced concrete work in (A) Foundations, footings, Base of columns and Mass concrete 10 Providing and laying controlled cement concrete M.200 and curing complete excluding the cost of formwork and reinforcement forreinforced concrete work in (B) Walls, from top of foundation level upto floor two level 11 Providing and laying controlled cement concrete M.200andcuring complete excludingthe cost of formwork and reinforcementfor reinforced concrete work in (C) Slabs,Ianding,sheIves,BalconiesLintels,Beams, Girders andCantileverupto floor two level. 12 Proving TMT bar FE 500/500D reinforcement for R.C.C.work includingbending, binding andplacing in positioncompleteup to floor twolevel (upto 10 ton) 13 Shifting of Hitachi by trailor/truckincluding loading and unloading with crane andprovision of all safety measures completeas and when required by the department anddirected by Engineer in - charge.

INR 500 /-

INR 11271.0 /-

Refer document

FileName	File Description	File Size
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB