|
| 1 | Dismantlingoldplasterorskirtingrakingout joints and cleaning the surface for plaster includingdisposalofrubbishtothedumping ground within 50 metres lead. |
| 2 | 12mm cement plaster in single coat on fair side of single or half brick wall for exterior plastering up to floor two level including internal rounded angleschamfers,and/orrounded anglesnot exceeding 80mm in girth and finished even and smoothnoextraformixinganyadditive.(1)1 cement : 6 coarsesand. F.M.-2.25 |
| 3 | 15mmcementplaster insingle coaton rough sideofsingleorhalfbrickwallforinterior plastering up to floor two level including internalroundedanglesnotexceeding80mm ingirthandfinshedevenandsmooth.(1)1 cement : 6 coarsesand. |
| 4 | Dismantling cement concrete or granolithic floors including base concrete and including stacking of dismantled materials as directed by Engineer-in-charge within a distance of 60 meters.(200feet) |
| 5 | Demolishing Cinder / dry brick pitching in floors, drains etc. including stackingof serviceable material and disposalof unserviceable material within 50 metres lead : |
| 6 | Providingandlayinginpositioncement concreteofspecifiedgradeexcludingthecost ofcenteringandshuttering-Allworkupto plinthlevel:1:2:4(1cement:2coarsesand (zone-lll) derived from natural sources : 4 gradedstoneaggregate20mmnominalsize derived from natural sources) |
| 7 | Supply&fillingofcinderinsunkenportionof buildingincludingbrakingintorequiredsizes includingsupplyofallmaterial,T&Prequired size including of supply of all material , labour, T&P required for proper completion of work. |
| 8 | Providingandlayingwaterproofingtreatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of: (i)Istcourseofapplyingcementslurry@ 4.4 kg/sqm mixedwith waterproofing compoundconformingtoIS:2645in recommendedproportionsincludingrounding offjunctionofverticalandhorizontalsurface. (ii) IInd course of 20 mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound in recommended proportionincludingroundingoffjunctionof vertical and horizontal surface.(iii) IIIrd course ofapplyingblownorresidualbitumenapplied hot at 1.7 kg. per sqm of area.(iv) IVth course of400micronthickPVCsheet.(Overlapsat joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 kg/sqm). |
| 9 | Disposal of malwa including loading & unloadingRefusedmaterialwithindistanceof 10.00 Km from site. |
| 10 | FinishingwallswithPremiumAcrylicSmooth exteriorpaintwithSiliconeadditivesof requiredshadeNewwork(Twoormorecoats [email protected]/10sqmoverandincluding priming coat of exterior primer applied @ 2.20 kg/ 10 sqm) |
| 11 | Distempering(Twocoat)withoilbound distemper of approved brand and manufacture & of required shade on undecorated wall surface to give an even shade over & including a priming coat with cement primer of approved brand&manufacturesuchasBerger,Asian paintsafterthoroughlybrushingthesurface freefrommortardroppings&otherforeign matters&alsoincludingpreparingthesurface even with plaster of paris or approved synthetic material & sand papered smooth including cost ofall materials. |
| 12 | Providing and applying white cement based puttyofaveragethickness1mm,ofapproved brandandmanufacturer,overtheplastered wallsurfacetopreparethesurfaceevenand smooth complete. |
| 13 | ProvidingandlayingCeramicglazedfloortiles ofsize300x300mm(thicknesstobespecified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarsesand),jointingwithgreycementslurry @ 3.3kg/sqm including pointing the joints with white cement and matching pigment etc., complete. |
| 14 | ProvidingandfixingIstqualityceramicglazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make,inallcolours,shadesexceptburgundy, bottlegreen,blackofanysizeasapprovedby Engineer-in-Charge,inskirting,risersofsteps anddados,over12mmthickbedofcement mortar1:3(1cement:3coarsesand)and [email protected] sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 15 | Cost for Dismantling of old sanitation work |
| 16 | PLUMBING WORKS |
| 17 | Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 litre low level whiteP.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests |
| 18 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid |
| 19 | Providing & fixing toilet paper holder C.P. brass |
| 20 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. |
| 21 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap |
| 22 | Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge. |
| 23 | Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms. |
| 24 | Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms. |
| 25 | Providing and fixing C.P.brass angle valve for basin mixer and geyser points of approved quality conforming to IS 8931 (including angle valve for WC flushing cistern, jet & kitchen sink) 15 mm nominal bore |
| 26 | Providing and fixing uplasticised PVC connection pipe with brass unions : 45 cm length 15 mm nominal bore |
| 27 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : 15 mm nominal bore |
| 28 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15 mm nominal bore |
| 29 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work |
| 30 | 25 mm nominal outer dia Pipes |
| 31 | 32 mm nominal outer dia Pipes |
| 32 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. |
| 33 | 15 mm nominal outer dia Pipes |
| 34 | 20 mm nominal outer dia Pipes |
| 35 | Providing and fixing brass stop cock of approved quality : For Internal Toilet15 mm nominal bore |
| 36 | Providing,fixing,jointingandtesting, uPVC SWRpipes,-typeB conformingtoIS:13592 towall,ceilingandfloor,approved quality, complete,forsoil,waste &rainwaterdrainincluding pushfit jointing with seal ring. (i) Single socketed pipes. |
| 37 | Internal Toilet (Soil & Waste Pipe) |
| 38 | 75 mm |
| 39 | 110 mm |
| 40 | Exposed on Wall (Soil & Waste Pipe) |
| 41 | 110 mm |
| 42 | Providingandfixingonwallfaceunplasticised-PVCmoulded fittings/accessories for unplasticised Rigid PVC pipes including jointing with seal ring leaving 10 mm gap for thermal expansion. |
| 43 | Bend without door (87.5°) |
| 44 | 110mm bend |
| 45 | Y\" Fitting without door |
| 46 | 100mm |
| 47 | 75mm |
| 48 | Single Tee with door |
| 49 | 110mm |
| 50 | 75 mm |
| 51 | Reduced Tee with door |
| 52 | 110mm x 75mm |
| 53 | Coupler |
| 54 | 110mm |
| 55 | Providing, fixing, jointing and testing , ofPVC NahaniTrap without jali ofminimum 50 mm water seal, making necessarycuttingin slabor floors and making goodincluding supports with cement concrete 1:3:6complete as approved by Engineer-in-Charge. 110mm x 75mm (Toilet) |
| 56 | Providing and fixing PTMT grating of approved quality and colour. Rectangular type with openable circular lid 150 mm nominal size square 100 mm diameter of the inner hinged round grating (including balcony) |
| 57 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : Range of two urinal basins with 5 litre white P.V.C. automatic flushing cistern |
| 58 | Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth. Granite Stone of approved shade |
