Tender For Ward No 59 Various Prakrti Civil Construction And Maintenance Work Various Other Palace Work 29 Nit 34 - 2 Dismanting of existing structures Iike culverts, bridges, retaining walls, CC road and other structure comprising of masonry, cenent concreie, wood work, steel work. including T&P and scaftolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serv iceable material with all lifts and lead of 50 metres as directed by Engineer. Cemcnt Concretc Grade M-1$ and above and PCC blocks 3 Demolishing brick work manually/ by mechanical mcans including stacking of serviceable material and disposal of unserviccable material within 50 metres lcad as per direction of Engincer-in-chargc. In cement mortar 4 Dismantling stone slab flooring laid in cement mortar including stacking of serv iceable material and disposal of unserviccable material within 50 mctres lead. 5 Dismanting of existing structures Iike culverts, bridges, retaining walls, CC road and other structure comprising of masonry, cenent concreie, wood work, steel work. including T&P and scaftolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serv iceable material with all lifts and lead of 50 metres as directed by Engineer. Dismantling Stonc Masonry Rubble stone masonry in cement mortar. 6 Silt clearance of drains. channels and canals with lit 1.5 Mtr and lead up to 50 Mtr. 7 Pumping out water caused by springs, tidal or river seepage, broken water mains or drains and the like. 8 Earth work in excavation in foundation, trenches etc. including dressing of sides and ramming of bottoms, including getting out the excavated material, refilling after laying pipe/ foundation and disposal of surplus excavated material at a lead upto 50m suitable site as per direction of Engineer for following depths, below natural ground /Road top level.In all types soils/saturated soil such as moorum, sand, sandy silt, clay, black cotton soil, kankar. ctc.Depth upto 1.5 m 9 Providing. laying spreading and compacting of granular sub-base by providing close graded Material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller 1O achieve the desired density. complete as per MoRT&H specification clause 401 including all material, labour, machinery. lighting. guarding and maintenance of diversion.Grading - ID Material 10 Providing and laying in puosition cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level :1:4:8 (1 Cement : 4 finel coarse sand : 8 graded stone aggregate 40 mm nominal size). 11 Reinforcement for R. CC work at al levels including straightening culting. bending, placing in position and binding all complete Thermo-Mechanicall Treated bars. 12 Structural stecl work riveted, bolted or welded in built up scctos, trusses and framed work, including cutting. hoising, fixing in postion and applying a priming coat of approved steel primer all conplete: 13 Steel work welded in built up scctions/ tramed work icuding cuting hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc as required in gratings, frames. guard bar ladder. railings, brackets, gates and similar works. 14 Centring and shuttering with plywood or steel sheet upto two stories ( cach story of height upto 3.5 metre from floor level) including strutting. propping etc. and removal of form for : Foundations, footings, bases of columns, cte. for mass concrete. 15 Providing and laying in position spccificd grade of rcinforced cement concrete excluding the cost of centring, shuttering. finishing and reinforcement - All work upto plinth level :1:1:3 (1 cement : 1½ coarse sand: 3 graded stone aggregate 20 mm noninal size) 16 40 mm thick fine dressed stone flooring over 20 mm (average) thick base of cement mortar 1:5 (lcement : 5 coarse sand) with joint sfinished flush. Red sand stone 17 Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering -All work upto plinth level :1:1½:3 (1 Cement:1½ coarse sand : 3 graded stone aggregate 20 mm nominal size). 18 Providing and fixing of reinforced Ferro-Cement drain covers designed for A class loading duly marked on cover with adequate steel reinforcement having thickness 75mm to 1 50mm anti corrosive bitumen painted M.S. plate , Rim and M.S. Iifting hooks, Admixtures like plasticizer, bond improving compound, shrinkage, resistance compound, abrasion resistant complete as per approved design etc. Standard Size 600x800mm (75mm thick) for span 300 to 450mm 19 Providing and fixing of reinforced Ferro-Cement drain covers designed for A class loading duly marked on cover with adequate steel reinforcement having thickness 75mm to 1 50mm anti corrosive bitumen painted M.S. plate , Rim and M.S. Iifting hooks, Admixtures like plasticizer, bond improving compound, shrinkage, resistance compound, abrasion resistant complete as per approved design etc. Standard Size 1000x800mm (100mm thick) for span 451 to 700mm 20 Carriage of Materials by mechanical transport including loading, unloading and stacking :Earth 5 Km 21 Random rubble masonry with hard stone in foundation and plinth :Cement mortar :6(1 cement :6 coarse sand) 22 Random rubble dry stone Kharanja (soling) under floor. 23 Proyiding and fixing Granite stone slab mirror polished and machine edge cut in walls, pillars, steps, Shelves, Sills Counters, Floors etc. laid on 12mm (Av) thick base of cement mortar L30 cement:3 coarse sand) jointing with white cement nmortar I:2 (Iwhite cement : 2 marble dust) with pigment to match the shade of the marble slab including grinding. rubbing and polishing complete Green / Black Upto to I500 Cm2 Tiles 24 Brick work with F PS bricks of class designation 75 in foundation and plinth in:Cement mortar I:6 (cemcnt:6 coarse sand) 25 Cement plastering including T&P, scaffolding, material and complete labour, including cost of water, curing, racking of joints etc. with 12 mm cement plaster of mix : including Providing /mixing of synthetic fibers compulsorily complying with IS 16481:2022 of 06 mm/12 mm length to be mixed @ 0.25% by weight of Cement i.e. 125 gms per 50 kg Cement up to 900 gms per cum of Concrete/ mortar, 1:6 (1 cement : 6 fine/ coarse sand) 26 Finishing walls wath water proofing cement paint of required shade New work (Two or more coats applied a 3 84 kg 10 sqm) 27 Distemperng with dry distemper of approved brand and manufacture (two or more coats) and of required shade on new work, over and including priming coat of whiting to give an even shade 28 Distempenng with oil bound washable distemper of approved brand and manufacture give an even shade New work (two or more coats) over and including priming coat with cement primcr 29 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade Two or more coats on new work 30 Providing corrugated G.S. sheet roofing inciuding vertical curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. Iimpet washers or with G.I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete upto any pitch in horizontal vertical or curved surfaces) excluding the cost lof purlins, raflers and trusses and including cutting to size and shape wherever required. 0.63 mm thick with zinc coating not less than 275gm m² 31 Providing and fixing3 layer PP-R (Poly propylene Random copolymer) pipes SDR 7.4 U V stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply including all PP - R plain & brass threaded polypropylene random fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in-charge.Concealed work including cutting chases and making good the walls etc., PN - 16 Pipe, 16 mm OD 32 Providing and fixing3 layer PP-R (Poly propylene Random copolymer) pipes SDR 7.4 U V stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply including all PP - R plain & brass threaded polypropylene random fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in-charge.Concealed work including cutting chases and making good the walls etc., PN - 16 Pipe, 20 mm OD 33 Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes butwithout fittings and the base support for tank 34 Earth work in excavation in foundation, trenches etc. including dressing of sides and ramming of bottoms, including getting out the excavated material, refilling after laying pipe/ foundation and disposal of surplus excavated material at a lead upto 50m suitable site as per direction of Engineer for following depths, below natural ground / Road top level. In all types soils/ saturated soil such as moorum, sand, sandy silt, clay, black cotton soil, kankar, etc. 35 Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level : 1:4:8 (1 Cement : 4 fine/ coarse sand : 8 graded stoneaggregate 40 mm nominal size). 36 Random rubble masonry with hard stone in foundation and plinth : Cement mortar 1:6 (1 cement : 6 coarse sand) 37 Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement - All work upto plinth level : 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) 38 Centring and shuttering with plywood or steel sheet upto two stories ( each story of height upto 3.5 metre from floor level) including strutting, propping etc. and removal of form for : 22.1.1 Foundations, footings, bases of columns, etc. for mass concrete. 39 Reinforcement for R.C.C. work at all levels including straightening, cutting, bending, placing in position and binding all complete. Thermo-Mechanically Treated bars. 40 Brick work with FPS bricks of class designation 75 infoundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand) 41 Cement plastering including T&P, scaffolding, material and complete labour, including cost of water, curing, racking of joints etc. with 12 mm cement plaster of mix : 1:6 (1 cement : 6 fine/ coarse sand) 42 Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete 43 Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm). 44 Providing and fixing 1st quality ceramic glazed vitrified tiles of colour standard white, grey, ivory, fume, red brown, light green, light blue, and other light shades with water absorption less than or equal to 0.08% confirming to IS : 13753 & IS : 15622 in floor, steps etc laid on bed on neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (excluding the cost ofcement plaster on wall and pillar) Size 600mm x 600mm 45 Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete including painting of fittings and brackets, cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid. 46 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x265mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : One urinal basin with 5 litre white P.V.C. automatic flushing cistern. 47 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 |mm C.P., brass waste of standard pattern, including painting of fittings and brackets. cutting and making good the walls wherever require: Stainless Steel AISI-304(18/8) Round basin405x355 mm with single 15 mm C.P. brass pillar tap. 48 Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangular shape 453x357mm 49 Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour. Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour. 50 Providing and fixing PTMT Bottle Trap for Wash basin and sink. Bottle trap 31mm single piece moulded with height of 270mm, effective length of tail pipe 260mm from the centre of the waste coupling 77mm breadth with 25mm minimum water seal, weighing not less than 260gms. 51 Providing and fixing PTMT towel ring trapezoidal shape 215mm long, 200mm wide with a minimum distances of 37mm from wall face with concealed fittings arrangement of approved quality and colour. Weighing not less than 88 gms. 52 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour. 53 Providing and fixing PTMTurinal cock of approved quality andcolour. 54 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in-charge. Concealed work including cutting chases and making good the walls etc., 20 mm nominal outer dia .Pipes. 55 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in-charge.Concealed work including cutting chases and making good the walls etc., 32 mm nominal outer dia .Pipes. 56 Providing and fixing unplasticised PVC connection pipe with brass unions : 15 mm nominal bore 57 Providing and fixing unplasticised PVC connection pipe with brass unions : 20 mm nominal bore 58 Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. 15 mm nominal bore. 59 Providing and fixing PTMT, push cock of approved quality and colour.15 mm nominal bore, 98mm long. Weighing not less than 75 gms. 60 Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements. Weighing not less than 106 gms. 61 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This included jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in-charge.External work 32 mm nominal outer dia .Pipes. 62 Providing at site, lowering & laying in trenches, aligning & jointing of RCC pipes NP2 class (with s/s ends IS: 458 - 1988 (amended up to date) marked and manufactured through spun process at all levels with Rubber gaskets (EPDM/SBR) for sewer lines as per IS: 5382 (including cost of Rubber gaskets lubricants) as per drawing, sectional hydro testing of the sewer pipe line (including cost and conveyance of water to site for testing) etc., complete as directed by Engineer. Note : E/w to be measured and paid separately. Length of pipe shall be measured in between the outer wall of two manholes /Inspection chambers, Pipe in the manhole/inspection chamber’s wall shall deemed to be included in the item of manhole/inspection chamber shall not be payable. 250 mm internal diameter 63 Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete:
